Two issues with latest update for Windows

I have noticed 2 issues with the new update.  When I have a file transfer I don't want, there is no longer a cancel link.  Also, when saving a file transfer that I do want, it saved it to the default location and updated my preferences to always do that.  It should respect the option setting to prompt me for a download location.

KenMadsen wrote:
My options are set to "choose a folder to save the file in each time", which is not being respected anymore.  The above reply does NOT address the missing ability to cancel an unwanted file transfer.
Try again please.
As long as you have a bullet in "choose a folder to save the file in every time"  then it will not save files to a folder or automatically accept incoming files.  The main exception to that is the initiation of a file for the first time on the newer clients.  If it pops up about the new automatic saving you would click on "settings" and toggle it back to you preferred setting.  The only other exception to that are images.  Images sent to you via a mobile are sent to the cloud and will be cached/downloaded into your media folder.  That cannot be avoided.  You can cancel ongoing transfers on your end but not pending transfers.
I made this graphic to better break it down:
If you find your Skype is not listening to your configuration changes beyond what was already mentioned, you can use the following program to reset your Skype configuration.  You will need to exit completely out of Skype beforehand, otherwise the reset will be incomplete.
http://www.pcdust.com/Downloads/ListFix/ListFix.exe
You can then rerun through the wizard, perform an initial file transfer, reconfigure your settings and those settings should hold.

Similar Messages

  • Mac with latest updates: installation window appears, shows message "Retrieving install" for 3 seconds then installation window goes blank. Why?

    Mac with latest updates: installation window appears, shows message "Retrieving install" for 3 seconds then installation window goes blank. Why?

    Hold down the option key during start up - you will be given the choice of which partition to use (Macintosh HD or Windows). I am having the same problem - Windows 7 seems to have installed but it goes to a blank black screen and there is nothing to do but force a reboot. I too have an i3 iMac... Windows 7 32-bit from original disc.

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • Latest update for windows phone?

     hi..it feels like its getting too boring after the latest update of windows phone 7.8.. so wha's new? may i know if there are new with windows phone??? after the update nothing comes next!
    yoohoo nokia! it's getting too boring in here!..

    hi mate,
    We don't comment on rumour or speculation here, so for now, Windows Phone 7.8 has been the only announcement that Microsoft and Nokia have made and rolled out as updates to users. There will be more information, if, and when, another update arrives.

  • Anyone else have issues with latest update?

    Yesterday morning I closed out of Firefox and found a window advising that there were updates and asking if I wanted to install them.  I plugged my MBP in so it had power and reconnected the external drive that I use for Time Machine and approved the install, accepted the terms and watched to see that it had gotten started, then went to take care of other things.  I was busy most of the day and never checked on its progress, but went to use it in the late afternoon and found it stuck at the "moving items into place" section of the update.  Since more than 6 hours had elapsed since the update started I killed it by holding down the power button. Waited about a minute and restarted it, wasn't surprised when it failed to reboot.  Inserted the original SL Install DVD and booted from that then repaired the disk and restored from TM backup.  Only some minor issues after restore, easily resolved, but this morning I got prompted to install the same updates again, Is this a good idea, or should I wait a few days before attempting to install these updates?  I have already hit the "Not Now" button, but expect I will be prompted again before long.
    Thanks,
    Bill

    This sort of helped, I installed each update separately, leaving the OS X 10.7.3 update for last and it still failed, unless it is supposed to take longer than 2.5 hours to complete.  I just finished restoring for the second time, I'm not sure what is wrong, but I will wait a while nd see if others have problems with this update.
    Thanks for the suggestions.

  • Graphics issues with latest updates on mbp mid 2010

    ive been experiencing graphics issues recently while playing games on steam (team fortress 2, Counter strike source, the lot). i notice its affecting starcraft 2 as well. they used to run perfectly fine a few days ago. and im pretty sure i haven't dropped it or anything between then and now. ive noticed that some people with mbp early 2011 models are experiencing the same problems. anyone got any info on this or experiencing the same problems?

    10.8 Mountain Lion is not the same as previous software.
    Contact the folks who sold you that adapter and see if there are any software updates for it.

  • Issues with latest update to 7.0.2

    I did the update to my Iphone 4S. Now entering my passcode causes a delay of 10 sec. It is sticking after the first number is entered. No issues with update with ipad mini. Please advise

    restore it from a backup, it' s the second step
    The third is to restore as new
    You could also get rid of the passcode and put it back after a couple of hours, you never know....

  • Ford Sync USB issues with IOS7 update for iPhone 5

    Hi,
    I've recently updated my iPhone 5 with the latest IOS7 update and now it won't connect to Ford Sync via USB. The bluetooth works OK but I want to play my music through the USB.
    It stays on the "indexing" screen and there is no audio output and I can't navigate away from this message.
    I've tried restoring my iPhone but this hasn't solved the problem.
    Urgent assistance to resolve this would be greatly appreciated.
    Thanks,
    Simon

    Hi
    I have purchased a Ford Focus MK3 with the Ford Audio System and I have difficulties connecting my iPhone 5S with latest iOS with the USB connection.
    When I connect my iPhone using USB the Ford Audio System recognizes it (it says iPod, not Iphone, but np). I can see that it starts playing the music tracks from my phone and I can fully control them. I see the meta tags and I see the progress in time of the song in my Ford Audio System.
    Problem: I can not hear the sound. I hear a little "knick" "knack" every now and then, but the sound itself can not be heard. I find that a little bizarre. All seems to be working just fine. I can navigate the albums, titles etc. All is recognized. Just no sound ...
    Using a USB Stick works perfectly.
    Using BT works fine too.
    Any help is much appreciated.
    Best regards
    Marco

  • Issues with latest update

    I have downloaded and installed the latest version of firefox, when I load firefox all I get is a black window

    hello kidsarocker, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
    in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Issues with New Skype for Windows 6.22.81.104

    Following are the issues faced with the new version of skype
    Contacts are online, but status is showing as offline
    Not able to send messages, still in progressing status
    Not able to change the skype status
    "Go to Support, Go to Community" no action is happening
    Skype call is not disconnecting
    I experienced all these issues in 10 mins. I want to goback to previous version which is perfect.
    Regards
    Kamal Deep

    I just uninstalled this latest version. I'm a week old with Skype, I use it for my 8 year old nephew in Jersey.
    Point is, it won't even let me minimise the new screen, I can't delete the person who I invited to be a contact who hasn't responded, (especially important because I thought it was my sister!) The few thing I previously learned are gone, I feel like I HAVE ABSOLUTELY NO CONTROL OVER THIS NEW FORMAT!
    How come I can only minimze, or FULL SCREEN? nothing inbetween? What if I want to multitask? My taskbar is GONE when I'm signed in.
    I'm going to turn updates off, and put the last version on...
    thanks for ruining something I thought I might enjoy! And Jesus, I WILL NEVER COMBINE FACEBOOK WITH THIS, SO STOP ASKING!!!!!! I HATE FACEBOOK, it's a small necessity I use "maybe" twice a month!

  • Issue with latest Update? or something else?!

    My Apple TV shows in the Summary page in iTunes - 144.07Gb of Other and 573.4Mb Free.
    In the drop down option in iTunes (on laptop) for the Apple TV device, there are no TV Shows, or Movies being shown - but there should be.
    On the Apple TV itself now, connected with HDMI to a TV, when I try to view any of the "My XXX" content show's - "There are no TV Shows/movies on your Apple TV. Set up a connection with iTunes, or purchase TV shows from the iTunes store. If you've already set up iTunes, make sure it is open on your computer."
    1 - There are TV and movies on my Apple TV
    2 - A connection with iTunes is active / connected
    3 - ALL of my content was purchased on the Apple TV (with iTunes connected with my account)
    4 - computer is open
    I am a subscriber to this thread (Support>Discussions>Apple TV) so I am going to ask around before I purchase support on my out-of-warranty Apple TV.
    Thank you for your time.
    TWE

    This may be related to the update, which version are you running.
    Although I didn't actually experience it some users lost content from their tv when upgrading to v 3.0, I believe that some reported more or less the same thing as you in that the content disappeared and 'other' seemed to fill up by about the same amount.
    To fix this issue, v 3.0.1 was released although I don't know whether it reversed what happened or simply stopped it happening again (as I didn't have the issue to begin with).
    It may well be that you need to restore your tv to recover the space used by 'other' and then resync your itunes library.

  • Permission issue with moving files for windows

    We run Quickbooks Enterprise on Macs. Parallels / Window 7 on iMacs for the client and data is on a Mac Pro. I am trying to move the data to an xserve, but the permissions get modified and quickbooks does not work, it gives me a -6000, -83 error.
    The permissions on the Pro have "nobody Read & Write" and after the move to the Xserve they become "ghoberg Read & Write". I tried the following methods to move the data and all of them had the same results:
    1) Copy;
    2) ditto /Volumes/ghoberg/QuickBooks /Shared\ Points/Windows/Quickbooks
    3) ditto -rsrcFork /Volumes/ghoberg/QuickBooks /Shared\ Points/Windows/Quickbooks
    4) ditto /Volumes/ghoberg/QuickBooks /Users/graysonh/Documents/test
    Any advise on coping the data over and keeping all the same permissions, etc?
    Any other thoughts on moving Quickbooks over to the the xserve?
    I can't get support from Quicken, because this is a windows software. We have been running windows quicken on macs for 4 or 5 years
    Thank you
    Grayson
    My email is wrong, this is right
    [email protected]

    Ask your host.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "TSemmes" <[email protected]> wrote in
    message
    news:fvamu9$97i$[email protected]..
    >I am having a problem uploading files with Dreamweaver.
    > The strange thing is I am able to upload existing files,
    even if they have
    > been modified, but not new files.
    >
    > for example I created a page
    >
    http://www.washpsa.org/test/events/test.html
    > If you go to the page you will find it is blank. That is
    the file is there
    > but
    > it is empty.
    >
    > I get this error message:
    >
    > An FTP error occurred - cannot put test.html. Access
    denied. The file
    > may
    > not exist, or there could be a permission problem. Make
    sure you have
    > proper
    > authorization on the server and the server is properly
    configured.
    >
    > The people who I work with who use Contribute also get
    the same message
    > and
    > are not able to upload files.
    >
    > Nothing has changed that I am aware of when this started
    happening.
    >
    > Any ideas what is going on?
    >
    >
    >
    >

  • Photo app syncing issues with latest updates

    Since installing the new OS X Yosemite 10.10.3  to iMac and ISO 8.3 to iPhone 5s and iPad3, not all of my photo albums and or photos in various albums are syncing..... any hints?? I also installed the latest iTunes 12.1.2.27 too ! I have rebooted all devices too....
    Thanks Schooner

    HI,
    Maybe try it this way this is what I did with mine because I did not migrate and didn't know about that either.
    Photos application for Mac Instructions that might help!
    On your iPad,iPhone keep the iCloud on in settings for Photos.
    if you have not opened the New Photos application yet to have it transfer your photos from iPhoto let it Transfer the Pictures.
    once you have all the pictures from iPhoto to Photos then in Photos go to Preferences
    there is general and iCloud tab and go to the iCloud and only uncheck the iCloud button that will make it so it doesn't sync with your iPhone and iPad for Photos.
    Then in Photos go up to View and press show sidebar because with that view you can move your pictures easier to albums snd delete or move any pictures or make new albums
    For Duplicates if you have a big pile in a row and I mean not like every other picture of the same pictures on the keyboard Hold down the shift button. or the other way is to Hold down the Command buttom that is right by the space bar then on the trackpad or mouse click once on the picture you want to delete and do a bunch at a time then on the last picture of that pile either right click the picture and delete or go up to the edit button which is next to file on the top left and click delete in edit. 
    when you are all done with moving around your pictures or whatever go back to Preferences and turn on iCloud and make sure you have the optimize Mac Storage and then you are done! I hope this makes sense and works for you! here are the 2 pictures I'm talking about in settings.

  • Keyboard repeating not working with latest update for mac?

    I just updated my Macbook Pro with a new version of Yosemite and i have come to find that the keyboard repeating function is not working anymore, even with the command: defaults write -g ApplePressAndHoldEnabled -bool false
    in terminal.
    Is there anyway to resolve this? I find the other character extremely annoying that they always pop up
    thank you!

    The repeating function you want has been off by default since 10.7 was released 3 years ago.  That terminal command should normally do the trick.  Did you logout and login again?

  • Recent playback issues with Quick Time for Windows

    Hi there. I recently started having choppy playback in Quick Time of
    .mov files composed of some footage shot on Sony XDCAM EX. Since I do not have the Sony codec on my PC, I had these .mov files converted to QT files with the H.264 codec by editors who use Final Cut Pro. They play badly, and now, so do all other mov. and MP-4 files for which I always used Quick Time.
    Currenlty have QT 7.62.
    Would Quick Time Pro 7 be the answer for a return to normal, fluid playback???
    Any help would be greatly appreciated.
    Thanks,
    Keith

    It wouldn't make a difference the pro version doesn't enhance the ability of what you can play or how good it plays. It just gives added feature's like being able to convert a .mov to .avi or save a file off a website.

Maybe you are looking for

  • Employee Vendor Account posting

    hi all. i have to configure the Vendor Accounts posting. there are few wage types, that need to be posted to employee vendors in FI. If the following wage types are to be posted, please explain me the following one. wage type : 1122 personal expenses

  • Is any function available for this

    Hi All, We all have might have written a query a lot of times where we need to find the next value corresponding to a key based the particular value of key being passed. I have always achieved it through subqueries using the MIN clause , but it does

  • Ext HD not mounting in Panther

    I have a WD ext hd that is formatted in OS Extended Journaled. It is partitioned into a time machine half and a regular storage half for movies and music and such. It works perfectly on my macbook running leopard but when i plug it into my imac g3 a

  • Listbox using select options

    hi all,          Can i give a listbox (drop down list) using select options? thanks nayan

  • Time machine and network Lacie drive

    Hi, I have an network Lacie drive (1GB) that I just connected to my local network. I started the time machine, and after a few minutes I get this error message: "The backup disk image "/Volumes/openshare/Peter Lauri's MacBook.sparsebundle" could not