Two Items Displayed For Single Task In Inbox

Employees are entering time and there managers are getting the tasks in the UWL inbox, but there are always two items for each one.  When the manager approves one of the items the other one disappears.  What can cause this?
Thanks,
Redding

I think I might see what the problem is.  We have the following Universal Workflow Systems configured:
SAP_HCM  WebFlowConnector           SAP_HCM           
SAP_HCM_2      ActionInboxConnector           SAP_HCM           
SAP_HCM_3     AdHocWorkflowConnector           SAP_HCM           
SAP_HCM_4      AlertConnector           SAP_HCM           
SAP_HCM_5      SomProviderConnector           SAP_HCM           
SAP_HCM_6      WebFlowConnector           SAP_LocalSystem           
SystemRef_1      AdHocWorkflowConnector           AdHocSystem           
SystemRef_2      ActionInboxConnector           ActionInbox
I have no idea why it was setup this way, but there are two WebFlowConnectors configured, SAP_HCM and SAP_HCM_6.  Could this be the problem?

Similar Messages

  • Work item display for step : Deadline Missed

    Hi,
    Parked invoices for one of the vendor is not triggering the work item in the workflow inbox.
    But the status is showing as complete. Appreciate if provide guidance how to analyse the issue.
    The message is read as below:
    Deadline Missed: Invoice# 5106117758 PO# 4567819 Vendor# 10300 
    Work item display for step " Deadline Missed: Invoice# 5106117758 PO# 4567819 V " called...
    Message no. WL223
    Thank you

    Hello,
    "i looked in SWI1 to see who processed it. But it is not showing any parituclar agent name. "
    Maybe nobody has process it, which is why it went overdue and passed the deadline.
    If it's a dialog task and it's completed then there must be an agent attached to it.
    Look in the workflow builder to see how the deadline is set up for that step. It could be that it just issues a notification.
    regards
    Rick Bakker
    hanabi technology

  • Two step confirmation for warehouse tasks in EWM

    Hello everybody,
    I am working on an internal prototyp to evaluate SAP EWM. Therefore it is essential that we use "two step confirmation" for warehouse tasks. Step one: confirm pick up of a pallet; Step two: confirm transportation of a pallet. Like it is used in SAP WM (Parameter I_QUKNZ in function module L_TO_CONFIRM and in standard SAP).
    I haven't found anything similar to that in EWM so far. I searched in the official EWM SAP Press book and also in google. But right no I don't have any idea.
    Do you guys have any hints on how to achieve two step confirmation somehow?
    Many thanks in advance!
    Stef

    Hi Jürgen.
    Thanks for your input! You are right, it works with RF!
    But it works kind of strange. Deleting source storage bin, creating another position etc.
    I will have a look how to adapt this.
    Thanks!

  • Two item renderer for one datagrid column?

    hi
    i have one doubt
    can we use two item renderer for one datagrid column
    any possibilities
    why i am asking this because
    during drag and drop i need one itemrenderer and during application initialization i need another itemrenderer
    any possibilities
    karthik.k

    Hi,
    I think your requirement can be completed by using ViewStack you can pass selected index to it according to requirement.
    See:
    <itemRenederer ...
         <viewstack selectedIndex = 0 ...>
              <vBox id="vBox1" >
                        Your 1st itemrenderer will come here....
              </vBox>
              <vBox id="vBox2" >
                        Your 2nd itemrenderer will come here....
              </vBox>
         </viewStack>
    </itemRenederer>
    You have to just toggle selectedIndex.
    Thanks

  • Two script forms for single driver pgm

    Hi all,
    Is it possible to have two script forms for single driver pgm , each for diff output type.If so watz d procedure.Kindly reply.
    Thanks ,
    kavitha

    Hi,
    Yes it is possible to have two or more script forms for a single driver program that forms will be different output types.
    Procedure:-
    1. Create the different layout sets by going se 71 t_code.
    2. Create the driver program related to script by going se38 t_code.
    3. After creating Driver program and Layout inform to the functional people they will configure NACE transaction with ur driver program, script form and output type.
    Reward points if useful.
    Thanks & Regards,
    Vasudeva Rao

  • Multiple line item display for PAYMENT ADVISE form(script) using F110 tcode

    Dear All,
    I am currently working on PAYMENT ADVISE script ( form ) - for which i have copied the
    form F110_IN_AVIS to zform.
    I am executing the form for output through executing Tcode - F110.
    The output works for single line item entry of vendor line items - but doesnot support
    for muliple line items.
    I have checked the standard program - RFFOUS_C - which has include - RFFORI06 for remittance advice -which supports for single line item display.
    Kindly advise me for the soultion of the same.
    Regards
    HC

    Hi,
    Do you manage to fix it ?
    we experienced the same problems (mass printing smarforms F110), we would like to use one time F110, and generates all the spool, for all the line items.
    Thanks
    Any help would be grateful.
    Thomas

  • Customer number needed in "GL a/c line item display" for customer gl?

    Hi SAP Experts,
    while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
    How can i solve this problem?
    Plz guide me.
    I need a quick response.
    Regards,
    Biswa

    Hi,
    Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
    If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
    special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
    I hope these helps.
    Regards
    Ravinagh Boni

  • Two External Displays for iMac

    Is it possible to run two external displays off of an iMac? I have a small display running and just was giving an old second display so I was wondering if I could run both at the same time?

    It's a real low-down shame that the HD5750-equipped 27-inch iMac cannot support triple displays.
    All of the HD5750 video cards available for Windows PCs support triple displays (two DVI and one DisplayPort) with the Eyefinity technology that was built into the HD5750's GPU.
    Having one iMac 27-inch flanked by two additional 2560x1440 monitors would be so SWEET.

  • One 30" or Two 24" Displays for Logic 9?

    Hi, would it be preferable to have one 30", or two 24", LCD displays for Logic 9 use specifically?
    The views, or windows (not sure what Logic calls them) will be mainly for audio/midi tracking, audio/midi editing, VI tracking and mixing of rock music. I may occasionally also need to tweak an effects plugin during mixdown.
    I understand Logic can take advantage of dual displays. Can it have the "track" window on one display and the "mixer" window on the 2nd display?
    Thanks for your advice!

    Yeah - I'd have 2 x 24" over 1 x 30" anyday (24" is pretty big anyway). As SC said, you can have your mixer etc on the other one and you can permanently see what's going on. Also you can send movies to the other screen which is great if you score to picture. Definitely take time to set up screensets, it'll speed up your workflow massively.
    I've just set this up myself and I'm very pleased with it apart from the fact that at the moment, I open a plugin from the mixer and it opens in the other screen. Not sure why it's doing that but I'm sure there'll be a workaround (any ideas sampleconstruct?).
    Anyway, go for it.

  • Line item display for Segment Clearing GL account

    In my scenario, document splitting is activated and zero balance is set for profit centre and segment.  I have assigned a GL account for automatic posting for segment clearance for posting.  I have posted few transactions and the document shows the posting happened to this Segment Clearing account.  However, when I want to view the line items posted in this account, system does not show the line items eventhough this GL is set up with line item display.

    Thanks for the reply.  But using this tcode also, it is not possible to display the line items.  I reproduce the message issued by the system while I am trying to view the line items of this particular account:
    "Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected."

  • Line item display for Internal Order

    Hi All,
    What is the transaction code for  Internal Order line item display.
    Thanks,
    Misbah

    Hi,
    Its KOB1 to KOB4.
    Rgds.

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • How to configure Two Tax Codes for single line item in work order

    Hi All,
    Please do Review the below scenario and tell me how to solve it.
    A) Certified Work Done Gross Bill Amt      100,000      
    Total Work Done Value      100,000      
    Less : Labour & Like Charges @ 30 % on Rs 100,000 =  30,000      
    Vat applicable Amount =      70,000      
    Add VAT @12.5%  Chargeable on Taxable Turnover of Rs. 70,000.00     = 8750
    Total Bill Value = 108750
    Service Tax @ 12.36% on 33% Value of Rs. 100000     = 4079
    G.Bill Amt = 112829
    Total Amt Due for Payment = 112829

    HI,  There is a possible solution for this scenario.
    1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
    2. While posting the Invoice (TRX - FB60) following steps need to be followed.
    3. Amount has to be split into two line items
    4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
        created for 12.5%
    5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that    
        was created for 12.36%.
    Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
    Regards
    K.Sanjai Babu

  • Line item Display  for G/L Account Regarding report RFSEPA01

    In transactions reports: FBL3N and FS10N I have differents accounts balances display.
    I already had tried to execute the RFSEPA01 but it shows RUNTIME ERROR ..Somebody knows a program to equal these .
    please treat this as a urgent..

    hi can u give me solution for this iam facing same problem
    thanks
    raju

  • Line Item Display for Gl, Vendor & Customer Accounts

    is there any standard report which gives line item details upon running it and not after going through the process of selecting the document listed by the report and then veiwing the line items..?

    Hi Kedar,
    Please see the below Tcodes.
    FBL1    Display Vendor Line Items
    FBL1N   Vendor Line Items
    FBL2    Change Vendor Line Items
    FBL2N   Vendor Line Items
    FBL3    Display G/L Account Line Items
    FBL3N   G/L Account Line Items
    FBL4    Change G/L Account Line Items
    FBL4N   G/L Account Line Items
    FBL5    Display Customer Line Items
    FBL5N   Customer Line Items
    FBL6    Change Customer Line Items
    FBL6N   Customer Line Items
    if u feel it is useful award points by way of thanks.
    Nagesh.

Maybe you are looking for

  • Unable to paste frame from one animation into another

    Hi, I'm currently working to make a set of GIFs. I'm using PS CS6 64-bit on a Windows 7 PC. This is my first time encountering this error. I am attempting to select a batch of frames from one animation (in the frame animation mode) then select "Copy

  • Mapping with the Customized Model

    Hi, How can I check the extra field that I have added in the view of the Personal Data infotype of the ESS package,  and I need to do Mapping of that, do I have to create the new model for the same or can we use the existing model (standard-provided

  • Adobe Reader 9.4.0 Customization

    Hello Everyone! Now this is a funny issue, we're trying to deploy the new Adobe Reader without certain features (i.e. Desktop shortcut, EULA disabled) using the customization wizard, yet every attempt has failed despite checking and re-checking the s

  • Parse A Variable From JSP to JSP

    hi all, how can i parse a variable from jsp page to another jsp page. i do not call jsp page . so how can i do this

  • Finding the code for 'Advanced|Print Production|Output Preview'

    This windows exposes the color separation used in the PDF file. I am looking to create a simple application which compares an order color with its PDF's attachment. This is used by a printer to make sure that the PDF color and the order color match.