Two keys have stopped working, whhy?

Two keys stopped workimg on my laptop with snow leopard. I rebooted the system but the keys still don't work. So now i can't get past login.

A temporary solution would be to use an external keyboard.

Similar Messages

  • Portege R500 - ctrl keys have stopped working

    Hi,
    Both control keys have stopped working on my laptop. The fact that it is both of them suggests that it is not anything physically wrong with the key. I can't do any ctrl+letter e.g. copy, paste, select all, or even ctrl+alt+del
    Can anyone suggest how to get these keys back?
    Many thanks
    Angus

    Hi
    Any key combination which would disable the CTRL buttons is not known to me.
    But I recommend checking the common keyboard options like FN+F10, FN+F11, FN+F12, Capslock, etc
    Furthermore you could test the notebook with an external USB keyboard.
    If the CTRL buttons would work using external keyboard, then this issue would be related to hardware problem.
    Greets

  • Two keys suddenly stop working

    The end key/right arrow key doesn't work. When i hold down the left shift key to get an uppercase i, the combination doesn't work. It does work with the right shift pressed.
    Any idea what is going on? Everything worked fine until today.
    Thanks!

    Hi, Mac85. Connect an external USB keyboard to your Powerbook and see whether those keys work properly on it. If they do, your Powerbook's keyboard has a problem. Do you have TechTool Pro or TechTool Deluxe? If so, run it and see whether any hardware issues are reported. I don't know whether or not Apple Hardware Test will detect bad keys on the keyboard; I think probably not. If the keyboard is faulty, it will need to be replaced unless you can be happy using an external keyboard.

  • Help...just updated to Tiger and some of my keys have stopped working!!!

    Hi
    I just updated from 10.3.9 to Tiger 10.4.3 and some of the keys on my key board dont work any more...
    Caps Lock, Plus & equals,right arrow & up arrow???
    Does anyone have any suggestions???
    Cheers
    Adam

    Hi Adam,
    Have you run Repair Permissions and "Verify Disk" from Utilities/Disk Utility?
    If not do that. If "Verify Disk" reports errors then Repair Disk from Tiger Install disc.
    Then use the 10.4.9 PPC Combo Update.
    This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    Let us know.
    -mj
    [email protected]

  • The letter keys on my MacBook have stopped working and the trackpad (or external mouse) are treating a single finger click as a double finger click

    The letter keys have stopped working on my MacBook. Number keys and punctuation keys seem to work fine. Also, the trackpad treats a single finger click as a two-finger click. I tried an external mouse and this does the same.
    If I restart, the mouse works fine but after a few minutes the issue starts. I have looked at a few forums and have checked the settings under system preferences but nothing jumps out at me :-(
    Any ideas???

    Is this one of the MacBooks with a removeable battery? If so, try removing the battery and restarting the MacBook (obviously while plugged in to an AC adapter) and test to see if you still have this issue. Other users have reported that swollen expanding batteries have caused keyboard and trackpad problems.
    If that isn't it, let us know, we'll keep helping you.
    Best of luck.

  • Shift key just stopped working...

    both of my shift keys have stopped working. they are working sporadically, and i'm not sure what happened. i was typing and suddenly my shift button would not work. i know i didn't hit some sort of hot key to disable the shift function, and it seems that the buttons will randomly work or not work, without hitting anything. is it possible that i have disabled them, or that there is a bug in my computer that is causing this to happen [i hope not, as the guy taht sold me my computer told me not to buy virus protection]. any help would be greatly appreciated, and i'm sorry for the all-lowercase post.
    rob
    ps. i have reset my computer several times to no avail.

    Welcome to Apple Discussions!
    One of the issues outlined in the User Tip I wrote may be affecting you:
    http://discussions.apple.com/thread.jspa?messageID=607533&#607533

  • Delete on key board stopped working. I have been using fn-delete and shift-delete. Any solution to resolve this without having to use fn/shift??

    delete on key board stopped working. I have been using fn-delete and shift-delete. Any solution to resolve this without having to use fn/shift??

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

    My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

    My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

  • Hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

  • All physical keys on my torch 9800 have stopped working

    this morning I discovered that every single physical key has stopped working. I've tried restarting via battery pull. How do I fix this?

    There ya go.
    Why now?
    Go put a slightly damp napkin on a nice piece of wooden furniture.
    Remove it within five minutes, no damage.
    Now, leave it there for three days and tell me what the wood looks like?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My lenovo G505s shuts down suddenly and key board stops working at times

    Hi,
    I have bought this laptop 10 days ago, I am facing two problems 1st is, it shuts down(suddenly off not proper shut down) while working without showing any error message, and the problem no 2 is its key board stops working at times, system is working fine but all the buttons of key board are not responding. it will work when I restart the system.
    please help what should I do, could it be replaced?

    Welcome to the Lenovo Community !
    Sorry to hear of your problems.  I would suggest that you try a reset of the BIOS just to rule out any hardware conflicts the system may have.  Try this........
    1. Unplug the charger / adapter.
    2. Remove the battery.
    3. Press and hold the Power Button for 15 seconds.
    4. Re-install the battery, plug in the charger / adapter if needed and power up the system to see if the problem was resolved.
    If the problems weren't resolved by doing the reset then I suggest you contact Lenovo Support for warranty service.  Both the problems you mentioned could be related to faulty hardware and the service center would be best equipped to check out your new laptop.  You can find the phone number for Lenovo Support in your country or area by using the link below....
    http://support.lenovo.com/us/en/supportphonelist_alt1
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • A certain set of keys randomly stop working in a Flex application

    My company has a Flex application (version 4.5.1), and certain keys will stop working from time to time when typing in a TextInput (the MX variety).
    Each occurrence has been on a Windows machine.  I have noticed it in Internet Explorer 11, using 15.0.0.152 (developer version), and co-workers have noticed it on other versions of IE (I don't know which Flash Player versions they were using, but they weren't the developer versions).
    About the only major change I can think of that may coincide with this issue would be having to convert a Google Map from using the Flash API to the JavaScript API.
    The keys that have stopped working are: k, m, !, #, $, %, &, (, -, _, =, +, ', " (capital "K" and "M" still work)
    I can still paste these characters into the text box even when the keys aren't working, so it's not an issue with the text box not accepting the characters.  I can have the application open in multiple tabs and have things working normally in 1 tab but not the other.  I have seen the keys stop working and start working again without refreshing the tab.

    Understood.  We have an extensive set of automated regression tests, and in the rare instances where we do break text input, it's an on/off thing.  This is super interesting because it's so weird, but I have zero theories about why it might be happening.
    If it is a Flash bug, there's probably a really long sequence of steps required to get it into a wonky state where this would occur, and the only way that we would figure out what's going on would be to reproduce it under an interactive debugging session.  I'll ask around, but I've been working on the engineering team since 2006 and I've *never* seen this.  I really like crazy stuff like this, but I've got nothing...

  • Links in PDF's and Excel have stopped working

    I'm using a fresh install of Firefox 14.0.1. Links in PDF's and Excel have stopped working (the reinstall was part of the problem solving). FF is my default browser.

    Starting in Firefox 14, Firefox no longer creates registry settings for launching links using "DDE". This has been reported to create two different problems:
    * "Firefox is already running" or "Firefox is not responding" error when following links in email messages in Thunderbird ([https://support.mozilla.org/en-US/questions/932461 Can't open links in Firefox by clicking URL in Thunderbird])
    * New instance of Firefox launches if the existing instance is running in Sandboxie ([https://support.mozilla.org/en-US/questions/933798 Firefox is running. I click on a link, say in an email, it tries to start another instance of the browswer instead of just opening a new tab as it did before.])
    Not sure whether your "silent fail" scenario is related.
    It is possible to configure Firefox 14 to use DDE by inserting some settings into the registry. I haven't researched this carefully myself, but there was some information about it on and external site linked in the Sandboxie thread.

  • My-space-bar-and-delte-button-have-stopped-working

    My-keyborad-spacebar-and-delete-button-have-stopped-working.Any-suggestions

    I don't suppose you have an external keyboard. If you do, test it. If not, try booting in safe mode (shift key down at startup.)

  • HT204053 Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninst

    Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninstall via the control panel my pc cannot find the route????? I do have an iphone and ipad. What can I do?

    The CrashIDs are what is needed. Do not attempt to attach or paste the reports.
    #Run Firefox in safe mode does that prevent crashes ?<br/>[[Troubleshoot Firefox issues using Safe Mode]]
    #Disable all plugins
    #Repeat and this time try in Windows safe mode. use the F8 key <br /> http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
    So you are saying it works ok as long as you avoid certain pages such as this Forum. That makes me wonder if it could be malware that is blocking access to assistance.Run malwarescans with multipe and up-to-date tools.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

Maybe you are looking for

  • Is It Possible to Downgrade Adobe Acrobat 9 to Version 8?

    I have a group needing to downgrade their Adobe Acrobat 9 Standard to Adobe Acrobat 8 Standard/Pro, because some applications are not playing well with the version 9.  Is this possible to do, and how would I go about doing so? TIA

  • Authority check POWL queries

    Hi all, is possible to hide some queries in POWL depending on the user's roles ? For example; in tab SRM Administration I want that all users can use the queries; "Suppliers", "Bidders" and "Contact Persons" ... , but i want that only some users can

  • Cluster replication issue in 12c

    Hi all, After the installation of Weblogic Server 12c we have got cluster replication problems in our application test environment. Although the same configuration used to work with Weblogic Server 10.3 now the secondary server seems to be removed an

  • AVDHD - Sony NXCAM - Render Issues

    Hi everyone, I've searched all over the forums and the rest of the Internet and still can't find a definitive answer, so I need some help, please! Here's the system specs: Camera: Sony NXCAM (AVCHD Format) The camera appears to use the mp4/h264 codec

  • Timing a task without waiting

    Dear Labview Board, I have a section of code in my VI that writes boolean values to digital output (bottom of the block diagram).   Right now I do this with the wait function inside a case structure.   This works, but has a side effect I would like t