Two lagging issues

Hello,
Two issues with my 2005 Powerbook
1. When turning it on, it hangs on that gray screen with the apple logo and the little circle spinning for about three minutes. While it's doing this, there's a very faint sound coming from the computer as if it's trying really hard to do something but just can't get the energy to make it happen. It does this for about three minutes, like I said. Sometimes a little longer, never less. Then it loads up fine and works like a champ (for the most part) thereafter once the desktop is fully loaded. Have used ONYX and Yasu to clean, still happens.
2. I used the install disc for an HP Photosmart 3200 printer and ever since things have gone awry in the photo realm. Now, when in the Mac HD if I click on the Pictures quick link, the cursor turns into the beachball of death and spins for about two to three minutes. Never happened before installing that damned printer software. It has since been uninstalled. Also noticing that Photoshop wants to hang up on the "loading preferences" part of the initial load screen... What can be done about this? Anyone know? Thanks a **** of a lot in advance.

acallaci:
Do you have the original HDD in the computer?
What is the total disk capacity and the available capacity of the HDD? (select Macintosh HD, type Command + I)
Try Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
Please post back with update, information requested and any further questions/comments.
cornelius

Similar Messages

Photoshop CC2014 drawing lag issues...

Every since the big updates of 2014 (CC, Yosemite), and the ensuing debacle of hardware/software issues, I finally have things working again. Except for one little caveat:
Everytime I restart Photoshop (every morning for the most part), if I don't go into the Library and delete the Settings in the Settings folder, I have to deal with an annoying lay in the drawing. Also, after a few hours of drawing, same thing.
It's as if it's bogged down, and refreshing is a beat or two behind. Just a split second, but more than enough to deem everything unworkable.
To remedy this, I shut down Photoshope, and delete the settings in the PS settings folder in the Library. Thus, in addition to all my prefs being cleared out and reset, and am warmly greeted by the "Welcome to Photoshop! Would you like a tutorial?" screen. Brushes, everything, all back to square one.
Very annoying, but I can't seem to find any other solution.
Keep in mind, everything worked great until the last updates.
Have uninstalled and reinstalled all software.
Using a late 2013 13" Macbook pro, 2.6 GHz Intel Core i5, 8GB 1600 mHz DDR3, Graphics: Intel Iris 1536 MB. Plus, I alternate between the Wacom Cintiq 13HD and the Cintiq 22HD.
Any insight or solutions?
Thanks!

Just in case anyone sees this post, it appears as if the problem lies with the Rulers. I've only been testing for few hours now, but it seems that turing the Rulers off solves the lag issue! Huh!

Photoshop CC2014 lag issue...

Every since the big updates of 2014 (CC, Yosemite), and the ensuing debacle of hardware/software issues, I finally have things working again. Except for one little caveat:
Everytime I restart Photoshop (every morning for the most part), if I don't go into the Library and delete the Settings in the Settings folder, I have to deal with an annoying lag in the drawing. Also, after a few hours of drawing, same thing.
It's as if it's bogged down, and refreshing is a beat or two behind. Just a split second, but more than enough to deem everything unworkable.
To remedy this, I shut down Photoshop, and delete the settings (.psp file) in the PS settings folder in the Library. Thus, in addition to all my prefs being cleared out and reset, and am warmly greeted by the "Welcome to Photoshop! Would you like a tutorial?" screen. Brushes, everything, all back to square one.
Very annoying, but I can't seem to find any other solution.
Keep in mind, everything worked great until the last updates.
Have uninstalled and reinstalled all software.
Using a late 2013 13" Macbook pro, 2.6 GHz Intel Core i5, 8GB 1600 mHz DDR3, Graphics: Intel Iris 1536 MB. Plus, I alternate between the Wacom Cintiq 13HD and the Cintiq 22HD.
Any insight or solutions?
Thanks!

Just in case anyone sees this post, it appears as if the problem lies with the Rulers. I've only been testing for few hours now, but it seems that turing the Rulers off solves the lag issue! Huh!

A New but Persistent Lag issue in FCP6 and OS X 10.5

I have Final Cut Studio 2 installed on an iMac 2.8Ghz (Intel) and a MacBook Pro 2.33 (1st Gen Intel). I have successfully run FCP6 on both these computer for 2 years on projects ranging from SD to Uncompressed HD. I have never had a lag issue. But recently I have had an agonizing time working on two DV-NTSC Anamorphic projects shot and captured on a Canon XL2. I also use WD My Book Drives for capture. Say what you will about the WDs but I have never had an issue until the recently (past 3 months).
On the two separate projects I had trouble capturing straight to the WD drives. This is new issue I have never had previously. Once I disconnected the Firewire I capture straight to the drive with no issues. But once I placed the footage into the sequence timeline and played through it at random time the video will lag and then come back. I shuttle back over the same spot and there is no problem. Continue to play through it and same lag issue intermittently though the entire sequence.
I have tried all the basics: Changing the RT mode, having only one sequence open, playback quality...
This issue occurs on both machines.
I am stuck. Any suggestions?

Please keep all posts that are related to a particular problem together in one thread. Starting a new thread just confuses the issue.
http://discussions.apple.com/message.jspa?messageID=11368172#11368172
x

SERIOUS lag issues with Intel iMac

Hello everyone,
I'm pretty frustrated right now. I've been having this serious lag issue with my new iMac for the past few days. I think it may have started after I ran the last security update.
What happens:
When switching between apps, the system will hang for 1-3 seconds between doing anything. This includes typing, mouse requests, etc. It's VERY frustrating. I have activity monitor open currently, and I am seeing both Safari and SystemUIServer hogging up the CPU resources like CRAZY. I've even seen Safari recently give a CPU usage of 120%, right before I loaded this webpage. tis isn't just centralized to Safari too.... I have the following apps running:
Adium 0.89.1
FoireFox 1.5.0.8
Safari
Activity Monitor
My Memory stats currently are:
175MB Wired
708MB Active
618MB Inactive
1.47GB Used
There should be no reason I'm getting these lags with just two web browsers and a chat client open.
Has anyone else expierenced the lags?? Any suggestions? I'm almost ready to reinstall OS X and not run the last security update. Thanks
iMac 1.83 GHz Core Duo Mac OS X (10.4.8) 1.5GB RAM, Extermal LaCie 160GB FW Porsche Drive, Griffin iMate, iPod Min 4GB, JBL Creature Speakers

Hello Matthew
Are you running any maintenance scripts on a regular basis?
http://www.thexlab.com/faqs/maintscripts.html
I would manually run this script from The X Lab, and my load times would improve greatly. The problem was, I would forget to run them untill I noticed web pages loading slow or iTunes and iPhoto taking for ever. It wasn't untill someone here in discussions suggested Anacron that I saw the light. WOW what a difference Anacron has been making in my overall system speed. My iMac has not been shutdown for 11days 5hrs 34mins (sleep or use only) and opening new App's, switching App's and web pages load as fast or faster than after a fresh start up. If your system is operating properly and you are having only what seems to be a slow or sluggish issue Anacron will make a difference.
http://members.cox.net/18james/anacron-tiger.html
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.8) Maxtor 300GB FireWire 2G Nano

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

Flash Player Projector Lag Issues, but...

Hello,
I want to playback this online flash game through the projector :http://www.realmofthemadgod.com/
usually I play this game directly in the internet browser (firefox). But now I would like to play it directly through the Projector in the hope the game performance (frames per seconds) would increase, so the gameplay it smoother.
I have searched for the .swf url of the game, it's this one: http://www.realmofthemadgod.com/AGCLoader1322454158.swf
I loaded this url through the Flash Projector, everything works fine. But the problem is, that the flash game is running even slower than through the internet browser. The Flash Projector causes the game to lag, and the frames per second lies around ~30.
Now the strange thing is, while still running the game through the projector, i simultaneously run the game aswell in the internet browser. The strange result: Suddenly the game performance of the game in the Projector increases alot and the fps jump to 60! The game runs very smooth this way. But as soon as I close the Internet Browser, the game performance in the flash projector falls down again and is pretty laggy.
Normally, you would think that running the game in windows would of course slow the game performance down...
Also, I tried another way to run this game directly through the adobe flash player (wihtout internet browser). Therefore, I copyed and paste the .swf of the game above to this site (http://www.swf-to-exe.com/). Running the game through this exe file brings the best results: The game runs very very smooth, like i hoped to be. The problem is, the devleopers updated the game, so somehow it's not possible anymore to convert the .swe to exe through www.swf-to-exe.com.
So this is a strange issue, I dont know if its the fault of the game or the fault of the adobe flash preojector.
I hope someone got an idea to solve this problem, so the lag issues can be removed (without running the game in 2 windows simultaneously).
Thanks in Advance!

MrX1980 wrote:
Hello
try to update DirectX
Regards,
MrX1980
DSOUND.dll would not be missing in a way that installing directx would resolve it.
and it is not included in any bimonthly redistributables either.
That said, Windows Server DOES have dsound.dll available, the only things disabled on this platform is directx acceleration for graphics.......

Can any one share with me any two critical issues in DP support project

Hello friends,
I am new to DP support project in SCM5.0 version,can any one share with me my queries
1.what is my support rolles and responsiblities .in DP
2.can any one share with me any two critical issues in DP and how can you resole it

Hi Sivaram,
1. As a DP functional consultant you need to resolve all the incidents raised in APO DP module( Forecasting, lifecycle planning, master data in APO DP, Planning books, macros , release to APO SNP or R/3 or other systems, CVC maintenance etc) which will also include BW part of SCM -APO related to DP, like data extraction and back up into and from infocubes. You will also support all the interfaces realted to APO DP , for the APO related part of the interface.
You need to reoslve these incidents in the time frames defined by SLAs for the support project.
You will have to also carry out problem management of some of the critical incidents so that incidents do not re-occur.
Further you will have to support Release /Change managment support( if it is part of your contract of Support project).
This willl involve testing changes in quality system, before these are moved to production system.
2 I found 2 crtical issues in APO DP support as below:
2.1 Sales history extraction data interafces from BW system used to have problems : technical problems of interface / jobs in BW running late, functional problems: sales history extract in BW not correct because various reasons
This used to lead to delayed job runs in APO and finally delayed forecasting and ptehr DP processes .
By proactive monitoring by BW team and taking appropriate actions for master data issues, this issue occurance frequency was reduced , but not completely eliminated.
2.2 Another major issue was related to back up process of APO DP planning data into infocubes. Finally by splitting the jobs as per daily, weekly and monthly bakc up procedure , we were able to resolve the issue.
I hope I have answered your queries.
Pleasse check and confirm.
Regards
Datta

Can u please give me two critical issues in app

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
can u please tell me two critical issues in app and explain me how i can solve that critical issues.
and also tell me two critical issues in account receivables or g/l accounting and explain me how i can solve that critical issues

There are no refunds.
You can try contacting itunes support and asking for an exception:
http://www.apple.com/support/contact/

Two FINDER issues

taking a stab at trying to solve two finder issues.
1. is it possible to keep finder from automatically sorting a re-named folder or file when i am in the middle of re-organizing things? say to wait until i have actively clicked a sort button or otherwise clicked out of the finder view? i am always running around trying to find a re-named file or folder in a list of one hundred files when all i really want to do is rename some things and then move them. having this newly named entity automatically do the skeedaddle out of my view in the finder window is a real pita.
2. is there a realiable method that will let folders sort alphabetically with folders and files to sort alphabetically with files? i find it very annoying to have all this mixed up together when i will look for a file with files and for a folder with folders. i tried some terminal editing based upon a posted url that described a solution to this at one point but it does not appear to have taken.
TIA!

1) No.
2) Why not sort by Kind?

Two major issues

Hello,
We experience two major issues with audio streams. I have
searched this forum and have seen a couple of posts with almost the
same problem. We use an audio broadcast in real time.
1. Delay. When an audio channel gets open and the Encoder
starts streaming everything is fine on the surface. As the time
goes by we notice a delay and the delay gets bigger and bigger. Our
network is fine, the latency between the encoder and FMS is less
than 1 ms. The delay is totaly random. It could not show up for a
day and it could show up within minutes. The only way to fix it is
to restart the channel on the client side (just reset NetStream
object on the client side). Restarting the Encoder also helps.
2. No audio at all after a prolonged usage of Encoder. Here
is the situation. I leave the office and leave the Encoder
streaming into FMS and several clients connected to the channel. I
step into the office next morning and my employees say to me that
they don't here any audio. I take a look at FMS and see the the
stream is still being published and clients are connected. But
there is NO audio at all. I confirm it with 100 percent since I can
see a green audio indicator jumping up and down as the Encoder is
getting audio data from the sound card but the clients do not hear
anything. The fix : restart the channel on the Encoder side.
I have been getting some help from Adobe customer support but
none of that fixed the problems. I would appreciate greatly if
anyone have (had) the similar issues and share how you fixed them.
Thanks a lot

I just installed a new build of the Encoder. I will let you
know if the problem still exist on Friday.

Slow MacBook Pro with frame lag issues

Hi,
When I switched on my MacBook Pro (mid 2010) today it was very, very slow booting and very slow in OSX (Mounatin Lion, 10.8.4)
The activity monitor showed that the CPU-usage constantly was around 50% for a couple of minutes but then went down to 1 - 10 and I couldn't see any specific app that ate all the CPU-usage. Same thing with the disk activity. The memory used 2 GB after boot.
However, after the CPU-usage, the disk activity and the memory "cooled off" the computer was still slow and laggy. With laggy I mean that I had frame lag issues playing videos from internet or DVDs or when I used the mission control or scrolled down a website. Kind of like when drivers for a graphic card aren't installed on a PC.
I can't remember I did anything out of the ordinary before this happened, except installing a few apps that I've now removed.
I've run the Apple Hardwaretest, repaired the file system with both Disk Utility and fsck and I've also checked these: http://osxdaily.com/2012/10/11/mac-running-slow-reasons/
I'm thinking about buying an SSD disk (already have 8 GB memory) or wipe everything clean and install fresh. You think that would help? I'd rather see another solution to this problem because the computer has worked flawlessly before all this happened.
Best regards
/Axel

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

(CS3) Lag issue on Vista

Hi,
I've just installed a fresh copy of Windows Vista Business last night. After installing Photoshop CS3 however, I noticed a very serious lag issue. I looked into the problem a bit on google and this forum but did not reach a solution.
In general, the issues are as follows:
1. Opening and closing even the smallest of files takes a ridiculous amount of time.
2. Moving the mouse cursor over the toolbar or menubar requires up to 3 seconds before a response is received.
3. Right click menu requires up to 3 seconds to appear
4. Application of any tools shows a noticeable delay of action.
The most common suggestion is the "Network Printer" solution, which was not helpful to everyone including me. I also tried to change the performance settings and the cache level according to the optimization guide on this site, that also did not solve the problem.
I tried to run the software in XP pro SP2 compatibility mode, did not make a difference in performance. Disabling all the graphic options for Vista such as Aero Experience also was useless.
I'm just wondering as to whether we ever did reach a solution to resolve the issue or is this problem still left hanging?
CS3 ran fine before my upgrade from XP Pro SP2, I do not believe my hardware specs have anything to do with the lag issue. Yet, I'll leave it below just in case you guys need it as reference...
Acer Aspire 5672:
Windows Vista Business Edition
Centrino DuoCore 1.66GHz T2300
2GB 667MHz RAM (1GB x 2)
ATI Radeon X1600
120GB Hard-drive

Bob:
I've stated the Network Printer did not apply to me,
thanks a lot still.
ID.Awe
- I do not have any MS mouse/keyboard software installed
- all auto updaters I can think of are turned off
- I actually have NO anti-virus installed whatsoever XD
- and indexing was stopped before I made this post
The strange thing is....
I went to sleep and left my computer on for the night,
when I woke up, the lag issue was simply gone....
I've restarted my computer and tried running all the usual softwares I have running, CS3 still seem to be stable.
Thanks for everyone's help, I will come back if the problem persists in the future.
Regards
Kei

Two small issues switching from Leopard to Snow Leopard

Hi,
I just recently switched to Snow Leopard from Leopard. I was considering Lion, but heard some bad things about it.
Either way, I noticed two small issues. The first was a hot key set on my Logitech mouse. I had a button preset to all windows expose. In the software
for the mouse driver you can set it to expose specifically. (Its not just setting it to a certain F key). For some reason this doesn't work anymore.
The other problem is when I link my mac book pro to an external monitor thru an hdmi cable, I notice on the tv screen it reverts back to the default
desktop background. Instead of having the picture I set, it shows up on the big screen the blue and purple space image.
Any suggestions?
Thanks

Thanks for the reply,
The Logitech mouse driver said there were no updates available so I figured the expose had something to do
with the new OS system since it now said expose and spaces, which Leopard never had spaces.
So what I did was figured out how to just set it up with the F keystroke and it worked!
When I link my Mac Book Pro to my tv, I use an external keyboard which is more up to date with the quick f keys up top and the arrangement is set up differently [ such as the volume keys are now f 10 and 11 instead of f 3 and 4 or something like that] Hopefully when my mbp is linked to this the keystroke I have set for expose still works. I believe it will.
And as for the desktop bg, after unplugging my tv I notcied it still stayed on the space theme. So I believe I know what may be the issue. I set that bg off of a picture on an external hd, and never saved the image on my computer hd. So I'm assuming it saved the desktop picture in some cache thing or something and once it got linked to an external monitor it got refreshed.
I now how that image on my computer and set, so hopefully the next time I link my computer to the tv, it'll stay.
Thanks!

[svn:fx-trunk] 13169: * Fixes for two FB issues and two regressions caused by recent fixes.

Revision: 13169
Revision: 13169
Author:   [email protected]
Date:     2009-12-22 14:39:59 -0800 (Tue, 22 Dec 2009)
Log Message:
Fixes for two FB issues and two regressions caused by recent fixes.
QE notes:
Doc notes:
Bugs: SDK-24708, SDK-24668, SDK-24827, SDK-24829
Reviewer: Corey
Tests run: checkintests, com.adobe.flexbuilder.project JUnit tests
Is noteworthy for integration: Yes, fixes two FB issues
Code-level description of changes:
modules/compiler/src/java/flex2/tools/oem/Library.java
modules/compiler/src/java/flex2/tools/Compc.java
modules/compiler/src/java/flex2/tools/Fcsh.java
modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
    Modified calls into SwcAPI's setupClasses() and
    setupNamespaceComponents() to pass in the SourceList.
modules/compiler/src/java/flex2/tools/VersionInfo.java
    Added null check to getBuild().
modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    Modified compile() to only add elements of "classes" to "sources"
    if not already contained. This covers the case of a Source being
    in the SourceList and the manifest.
modules/compiler/src/java/flex2/compiler/swc/SwcAPI.java
    Modified setupClasses() and setupNamespaceComponents() to check the
    SourceList before the SourcePath when looking up sources.
modules/compiler/src/java/flex2/compiler/SourceList.java
    Made getPaths() public.
modules/compiler/src/java/flex2/compiler/CompilationUnit.java
    Modified setState() to skip disconnecting the root's Logger. This
    fixes SDK-24827 and SDK-24829.
modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java
    Added sourceList variable, modified procressSources() to
    initialize it, and modified init() to recursively store a
    timestamp for each path in the SourceList. This fixes SDK-24708.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24708
    http://bugs.adobe.com/jira/browse/SDK-24668
    http://bugs.adobe.com/jira/browse/SDK-24827
    http://bugs.adobe.com/jira/browse/SDK-24829
    http://bugs.adobe.com/jira/browse/SDK-24827
    http://bugs.adobe.com/jira/browse/SDK-24829
    http://bugs.adobe.com/jira/browse/SDK-24708
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilationUnit.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/SourceList.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/SignatureExtension.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Compc.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Fcsh.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/VersionInfo.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java

Two lagging issues

Similar Messages

Maybe you are looking for