Two large rectangles in Web Browser

Hello all
I've just started using Captivate today; and I'm getting
stuck.
My project has a cover page, one question page and a quiz
summary page. I've messed around with the project settings a bit;
but nothing major.
When I preview my project I see two large white rectangles in
the top center of the slides. I don't know why they are there, or
how to get rid of them. Can anyone help?
Thanks

A little info that might be of some value to you,
NZ_Developer. To get the version you want to install after
removing your current Flash Player,
go
to this Adobe link.
and select the player you think might work best with your
current configuration.
And to get information about how to avoid or solve a known
problem with that install process, I recommend you
read
and apply this article from "Flash Focus"

Similar Messages

Box with rounded corners displays as rectangle in Web Browser

I am using the box control (IBoxObject) in my Crystal Reports with rounded corners. However the box displays as a rectangle with square corners when viewed in a web browser. I have tried this in IE 7.0.5730.13, Firefox 3.0.3 and Chrome 0.2.149.30 all give the same problem.
The interesting thing is that the boxes display correctly at design time and when exported to PDF, but they wonu2019t display correctly in IE/Firefox/Chrome. Here are the specific settings for the box:
                CornerEllipseHieght = 375
                CornerEllipseWidth = 375
                Crystal Reports Version 10.5.3700.0
I have also attached an image to try and clarify the problem.
[Picture showing Box at design time, in a Web browser and when exported to PDF|http://i38.tinypic.com/10p6k1v.jpg]
Thanks in advance for any help with this issue.
-John

Thank you Ted, this was my take on the problem but it is good to have a confirmation.
There are CSS (HTML) solutions for creating boxes with rounded corners, such as [SpiffyBox|http://www.spiffybox.com/] and [CSS Rounded Box Generator|http://www.neuroticweb.com/recursos/css-rounded-box/index.php?idioma=en] and many more that can be found using [Google|http://www.google.com/search?hl=en&q=cssboxeswithroundedcorners&btnG=Google+Search&meta=].
Do you know of any plans to support rounded corners in the future?
Thanks for your help!
John

When I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

when I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

Did you check the home page setting to make sure that if doesn't have pipe (|) symbols?
See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

Opening OEM for two Oracle 11gR2 Databases in the same web browser automatically log out.

Hi to everyone,
I have an issue regarding Oracle Enterprise Manager in 11gR2. I have two database (SWPROD, PDPROD) in a single server. When I open the OEM URL for SWPROD it is successfully logged on but when I open the OEM URL for PDPROD and successfully logged on the other tab for SWPROD will automatically logged out. And when I switch to the other tab for PDPROD it is also automatically logged out. Both OEM URL is open in a single web browser like Mozilla Firefox. What would be the reason why both OEM URL will be logged out when I open them at the same time?
Thank you for your incoming response.

Well it seems the only way to clear these out of EM was to shut BOTH RAC nodes down and power them up one at a time. Now the updates aren't shown as required and my compliance score is where it should be.
Is this a bug ? Seems pretty stupid to have to shut down both RAC nodes to fix this. Powering a single RAC node off and back on did not clear this.
Unless i'm missing something??

E90 Web Browser displays characters incorrectly

Hi there,
I've recently bought a Nokia E90 and have found it pretty cool so far, except for one thing: the Web Browser is not displaying characters correctly. It shows almost all of them as empty rectangles, with just one or two exceptions.
I've checked several web pages (including ones that I maintain and which, therefore, I /know/ send correct character encoding information), both online and local and it happens on all of them.
I've tried changing the settings to "Automatic" character encoding and "UTF-8" and it doesn't make any difference (I haven't tried any of the others, though most of them are for non-Latin alphabets).
The characters display correctly throughout the rest of the OS (notes, QuickOffice, Acrobat Reader, etc.) - its just the Web Browser which is effected.
The only significant changes I've made from factory settings are installing three applications: Python, PuTTY and OggPlay. I removed OggPlay after I installed it because it didn't seem to work (in fact, it sort of "crashed" the phone - I had to remove the battery to get it to work again!).
Does anyone have any ideas why the Web Browser is not displaying characters correctly? Any help would be very much appreciated (considering how expensive the phone is!)
Thanks.

Hi Guys,
I have also encountered the same issue: Most Characters are not displaying properly on the E90 Web browser. I am currently using E90 which is (English/Arabic and French) enabled.
I have checked the same websites with N95 and there not a single problem.
I am quite disappointed with the E90 website browsing experience especially that I am running the latest FW (v210.34.75), so keep hoping that this gets fixed with the next FW version.

Message: Your Web browser must accept cookies in order for you to send your data. Please adjust your browser settings to enable this site to store cookies.

Hello! I have two questions.
(1) I want to submit a question through www.tune-up.com but the website does not accept my inquiry.
I get the following message: "Your Web browser must accept cookies in order for you to send your data. Please adjust your browser settings to enable this site to store cookies and access this site again."
I checked my cookie settings, and it looks like I have the Firefox default settings (i.e. cookies are accepted). Tried to submit my inquiry again but it does not work. Please advise how to make sure I can submit inquiries etc.
(2) I want to start using the Google search again but not sure how do change the settings. I do not want to have DuckDuck Go as my default. Would you please describe how to change back to Google? Also, is the problem I described above perhaps related to the DuckDuckGo search engine I use?
I look forward to your assistance which is greatly appreciated - Thank you!

On #1, you can check the site-specific cookie setting using the Permissions panel of the Page Info dialog. When you are on the page, you can open that dialog using either:
* right-click the page > View Page Info > Permissions
* click the padlock or globe icon in the address bar > More Information > Permissions
Skim or scroll down to "Set Cookies" to make sure it is not set to Block.
If that is okay, some other random thoughts:
* Are you using the site in a private browsing window?
* Do you recall disabling DOM storage, which sites sometimes use instead of cookies to store large blobs of data (Firefox controls access to DOM storage using your cookie setting for the site)?
On #2, your default search engine should not have changed. To change it to Google, you can use the icon on the left end of the search bar (the classic small search box that appears on the toolbar). Please see: [[Search bar - add, change and manage search engines on Firefox]].
I don't think there is any connection between #2 and #1.

A way to have part of the screen presentation and part live web browser?

I'm trying to put together a presentation that involves demonstrating a
live web site.
Neither Keynote or Powerpoint will let me imbed live web pages into a presentation on a MAC. (ibrowser plug-in will do it for powerpoint PC but not MAC).
I'm wondering if there isn't some way to use two programs to accomplish my goal, which is to have notes about the live web page on screen (sort of prompting and reminding me of what to show next on the web site), while showing the web site and working with it on another portion of the screen.
I come close by creating a powerpoint presentation creating my "prompting notes"
on only the far left side of the powerpoint pages, then turning it into a PDF, then opening the PDF but pushing the window all the way to the right side of the computer screen so on the right I see my "notes" and on the left to center of the computer screen I have the live SAFARI web browswer. I can move from page to page on my slides by hitting the "next" page button on the pdf PREVIEW window.
It kinda works, but isn't anywhere near as slick or clean as I'd like.
Can anyone think of a cleaner way to do this with any combo of MAC applications?
Thanks for any input.

I figured it out myself! I'm making a quicktime movie out of the presentation,
scale the quicktime window to a corner of the screen, and then have the web
browser on the rest of the screen.
Just thought I'd post in case anyone else had this problem and was looking for
an solution!

Adobe 9.1.3 and FireFox 3.5.1+ "...can not be used to view PDF files in a Web Browser"

This is the issue but I'm not sure there is a resolution:
Firefox: Version 3.5.1
Adobe: Version 9.1.3
When navigating the web, click a URL that opens a PDF inside the browser and you get an error * "The Adobe Acrobat/Reader that is
running can not be used to view PDF files in a Web Browser". Please exit Adobe Acrobat/Reader and exit your Web Browser and try again". I did read a post that doing a "repair" from the Adobe Reader application should fix this, they also reference a few registry keys to check becuase the post states it's lost the application path to Adobe version X. I don't necessarily buy that "fix" and here are my details below.
In FireFox if you navigate to Tools > Options > Applications > Adobe Acrobat Document
You're given choices:
Always ask: DOES NOT WORK, produces afore mentioned error *
Save File: Works, saves the file to a directory on your PC
Use Adobe Reader 9.1 (defau...: Works, opens your PDF's outside of your web browser
Use Adobe Acrobat (in Firefox): DOES NOT WORK, produces afore mentioned error *
Use other...:
IE seems to just work as expected.
If you open Adobe Reader > Edit > Preferences > Internet > Check "Display PDF in browser" - DOES NOT WORK, produces afore mentioned error *
This would seem to be an Adobe error rather than a FireFox web browser problems since FireFox does seem to know the correct path although I suppose you can't rule out that this is a FireFox problem since 2 out of the 4 PDF open options DON'T WORK.
Any thoughts on this issue would be greatly appreciated.
Other information:
Adobe 8.1.5 works perfectly with FF 3.5.1+ when opening PDF's in the web browser, we also had no problems with previous versions either.
MSI push via Active Directory from Adobe 8.1.5 upgrade to Licensed Distribution I signed up for, Adobe 9.1.3 which was upgraded from 9.1.0, to 9.1.2, to 9.1.3 via an MSP patch.
Operating system: Windows XP SP 2, plenty of RAM, plenty of Drive
IE version this works with the new version of Adobe 9.1.3 is version 7 (7.0.5730.13)
Our FireFox MSI's come from Front Motions website and as far as I know we've never had problems with their MSI's, also tried the new release of FF 3.5.2 from their website.
I think that about covers it. Anyone else experiencing the same problems or have a patch?

After troublshooting this for the entire day today the issue seems to be a MIME problem.
If everything is woking perfectly, in Tools > Options > Applications...
You should see 4 or more things related to Adobe like "Adobe Acrobat Forms Document", etc. If you don't see at least 4 MIME entries either your Adobe installation is hosed or your FF installation is hosed. I haven't figured out which is causing the issue.
What I did was remaster my patches from my original Adobe 9.1.0 MSI with the two updates via the command line in the directories with the source files. On the 9.1.0 original file I first remastered my MST transform with the Adobe MST utility. I then applied my patches.
msiexec /a AcroRead.msi /p AdbeRdrUpd912_all_incr.msp
msiexec /a AcroRead.msi /p AdbeRdrUpd913_all_incr.msp
I then uploaded that to my network share, unlinked my group policy, made a new group policy, added a batch file to delete adobe.com from program file and the desktop on system startup even though my MST was supposed to take care of that - it's not a perfect world is it? :-)
I then reapplied my GPO's for both FireFox 3.5.2 and Adobe 9.1.3, I checked to make sure the MIME extensions were there and they were. You might have to go into your Adobe Preferences and select that open in browser setting depending on what happens or adjust your MIME settings in FireFox's options but it should work.
That's what worked for me. It's possible a few other things I did along the way tweaked it out, in my group policy on the first run I did select to upgrade previous group policies, for the remaster and repush I didn't select any previous GPO's to upgrade.
It's hard to tell what one thing tweaked it out or what combination of things tweaked out the install. I did also reinstall Adobe 8.1.5 and FF 3.0.10 before doing all this since our machines currently have that setup, I'm not sure if that affected it either, it's just hard to tell but I don't think it did simply because I had done that several times in troubleshooting this issue.
If anyone else has more specifics that would be great!

Java does not work on my Win 7 IBM-compatible PC using Firefox as my web browser

A typical example of a website I would like to access & view is "www'cut-the-knot.org", a relatively mathematics-related website with a lot a very nice math content, where (roughly estimating) 70-90% of all web pages on the web site use Java applets to communicate that math content.
I CANNOT view the Java applets (am restricted/prevented from doing so) --- on CTK or ANY other website!.
I could go into all the details but, essentially, I have tried just about everything I can think of (or have found to do/try in discussions on the Internet by googling the problem) & nothing seems to have had any positive affect ... I can still not view ANY Java applets on ANY website! :-(
I USED to be able to view Java content on the PC I was working on, although, a few months ago, I migrated from Win XP to Win 7 when MS stopped supported Win XP. I don't know when things changed but, "while I wasn't looking" (&/or paying attention) something DID change. :-(
I'm using an IBM-compatble PC (not a Mac) with Windows 7 & Firefox as my web-browser.
I'm just a private individual ... just a "little guy" in my home ... little personal technical knowledge, no big biz connections, no $ to hire expensive (or inexpensive) experts to come in & assess & fix the problem. I would even just like to know if there is some kind of future expected date when something MIGHT get improved, barring an action "solution" of the problem.
From what I read on the Internet, some problem(s) relating to this issue has/have been extant for at least two years, dating back to at least 2012, if not further? I assume the problem would have been fixed long ago if it were easy to fix so, I'm not trying to be overly critical ... just asking for some kind of status report --- help/communication/knowledge/expertise/solution/etc ... & any information would be appreciated. Knowing WHAT the problem is is a high priority to me, certainly as well as understanding HOW TO FIX the problem, & WHEN that fix will occur.
Java is a seemingly wonderful technology but, if there are such severe security risks that require it be enabled so that no one (I'll assume I'm not the only one unable to view Java applets) can use it, it doesn't have much value to visitors to websites that employ Java to deliver a majority of their content. Part of the problem, obviously, is that (like CTK) MANY websites ALREADY use/employ Java --- & therefore, end-users have almost no access to the content in/on those websites.
Thanx in advance ...
arbmm7
(2014-08-30-1023 PST)
PS - Just before posting this comment, I clicking a button at the bottom of the Mozilla web page that said it had "guessed" at current browser & OS, & the following is what was "reported":
Firefox version 32
Windows 7 OS
* Shockwave Flash 14.0 r0
* Adobe PDF Plug-In For Firefox and Netscape 10.1.11
* Next Generation Java Plug-in 11.11.2 for Mozilla browsers
* NPRuntime Script Plug-in Library for Java(TM) Deploy
* VLC media player Web Plugin 2.1.3

PS - SORRY --- I meant (in the title): "... using Firefox as my web browser."

Problem in Calling Sub VI remotely from a main VI in a Web Browser.

Hi i am Calling Sub VI remotely from a main VI in a Web Browser.
My task details:
I my project i am fechting data from a MySQL data base and storing in a table on the main VI front panel.For User help i am calling a sub VI front panel which is consisting of a progress bar and percentage indicator.It indicates the user that the data is loading from the DB.The main purpus of a subVI is to make the GUI more user friendly..by displaying the SubVI front panel until whole data is loaded into the table and closing Immediately after load complete.
What i did?
To call a SUB VI i just right clicked on the subVI icon on the main VI >> SubVI node setup>> Show front panel when called.
In main VI Execution property i have seected Preallocated clone reentrant execution
In Sub VI Execution property i have seected Non- reentrant execution.
If i select Preallocated clone reentrant execution in Sub VI while calling sub VI i am getting warning message saying subVI front panel cannot be controlled remotely.
Promblem I am facing:
It is working perfect in a server machine(as a stand alone) but when i call the same VI or application in remote system i abserved two issues
1. When i call a sub VI every time the front panel is coming in both server and client machine.I want the subVI panel to display only in the client machine, other wise the user sitting in front of the server will be confused by seeing many popups(SubVIs) in his system.
2. When one client is calling a SubVI, the other user should wait until the the sub vi displayed and closed in the 1st client.Means the simultaniously more than one client cant access the SubVI.In this case i can access the main VI simultaniously but not the SubVI.
Please give me the solution.It wil be very helpful for me.Thank You in advance.
Thanks & Regards
Gundappa

I did some prijects with Siebel, but we used JMS for sending and retrieving message between Siebel and BPEL. Can you use this solution? This also gives you the advantage that you can guarantee that the transactionis committed and placed in a queue. You can also bring down the BPEL environment without interfering the Siebel environment, because the communication is done via JMS (queueus)

Display Report Parameter Form on Web Browser

I have prepared a report (with a user parameter form )using Report Developer. Then I call the report in a web-based application through the web-browser. the parameter form display normally, except that there are two buttons on the top : submit and return. Also, the layout of the parameter form is not consistent with the style of my application.
1. Can I customized the layout of the parameter form so that it can have consistent style with my web-based program ? If yes, how?
2. Can I suppress the buttons shown on the parameter form ?
(Our Report Server is 9iAS )

Hi
Reports built-in parameter form is deliberately fairly simple in capabilities (otherwise, you'd have all the functionality of Forms inside of Reports). However, with JSPs in Reports 9i, you can go farther to create a custom parameter form of your own liking.
Thanks
The Oracle Reports Team

Safari doesn't open, computer without other web browser

Safari does not even open, simply quits unexpectedly within a few seconds. I have no other web browsers downloaded.

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

"Cannot use adobe reader to view pdf in your web browser" error in Windows 7 and Acrobat pro 8.1.7

I get the error "Cannot use adobe reader to view pdf in your web browser. Reader will now exit. Please exit your browser and try again" in Windows 7 x32 and Windows 7 x64 with Acrobat pro 8.1.7. This happens when trying to open a PDF file in Internet explorer 8.0.760 or when I open a PDF in Quickbooks 2008. If I answer ok or cancel the file opens normally. If I open acrobat 8 first then the pdf files open as expected. I also tried a copy of Acrobat reader with no difference in the outcome. Since this happens on two different computers one fresh copy of windows 7 x64 the other an upgrade to windows 7 x32 and they used to work before the change to windows 7, I assume there is some kind of incompatibility with windows 7 and acrobat. Is this a known issue and will it be fixed in an update to acrobat in the near future?

tvandersluijs - I'm sorry if that screwed up your machine however:
1. What version of Adobe Reader are you using because as you can see the registry entry is for Adobe Reader 9, if ur using Adobe Reader 8 then u need to specify ur version as PAllens entry suggested - "E.g. "C:\Program files\Adobe\Acrobat [version]\Reader\AcroRd32.exe""
2. I've used this solution significantly because I have come across this specific issue for multiple users.
3. All the registry entry does is tell Windows what program to use by default to open/view PDF documents.
My intention wasn't to screw up ur machine or anybody elses as I said I've used this solution many times however what I've should gave is the disclaimer to backup ur registry before u make mods so u can revert back in case. Also the ony other thing I can think of is that this solution was for Windows XP using registry editior 5, I'm noticing that the title of this thread is Windows 7.

Why cant i download itunes on my windows 7 pc? i used to have it once but it was not updated for a while and got deleted...i have tried to download it on other web browser but all i got was "thanks for downloaing itunes" and nothing happened

why cant i download itunes on my windows 7 pc? i used to have itunes on my pc once but it was not uploded for a while and got deleted...and now i have tried to download it and all i got was "thanks for download itunes"...after that i have tired to dwnload it from another web browser and ive got the same thing.....!!

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Use a web browser as the source for the vision assistant

I want to access an ip camera over the internet and then use its video feed to do some processing with the vision assistant. I was wondering if someone could tell me if this is possible and how can it be done. what I have so far is an application that works with local cameras and I also have an example of a web broser in labview. I thought I could use the web browser and use a local variable from the browser in order to get the image, but this can't be wired to the grab or snap, because its not an image, so can someone please tell me how to convert the browser into a video feed, in order for me to use it in my application.

Crop the image out of the print screen. I imagine your screen will be a much larger resolution then the camer, and will only take up a portion of your browser window.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Two large rectangles in Web Browser

Similar Messages

Maybe you are looking for