Two layouts and screen share questions

1) Will the contents of a pod be affected if I switch between two layouts that both contain the same pod?
2) Will my screen share remain active in one layout if I briefly switch to a different layout without the share pod or will I need to re-initiate it?

1. If you have the same instance of a share pod on two (or more) layouts, then the content will seamlessly transfer between layouts.
2. When leaving a layout with an active screen share, your screen share ends. You must re-start your screen share when you come back to a share pod.

Similar Messages

  • IMac Intel with Parallels, Two Monitors and Screen Spanning

    Hi,
    Longtime Mac user forced into using Windows XP for my business. I have an iMac G5 2.1 (iSight) PowerPC. I need two monitors with screen spanning so I'm thinking of getting an iMac Intel, running Bootcamp or Parallels with XP Pro, and using a screen-spanning program.
    1. Can I run Windows XP on the Intel Mac and use screen spanning with a PowerPC iMac?
    2. Is it better to load the screen-spanning software on the XP or Mac system?
    Thanks! Any help appreciated.

    Hi and welcome to Discussions,
    if nobody answers your questions it could also be that nobody has tried it yet.
    I haven't tried this setup yet, so forgive me for fishing in muddy water.
    Windows XP is capable of using two (or depending on the graphics card even more) monitors for duplicating or spanning.
    My own two Intel Macs are showing me this opportunity in the preferences.
    Since I never had the need to do so I have never attached a second monitor.
    The Intel iMacs and MacPros are capable of attacing second monitors however with the iMacs you a adapter which you can get from Apple.
    I would suggest (if possible) to go the nearest Apple Store and try to convince the guys there to do such a setup for you to verify that it works.
    Good Luck
    Stefan

  • Snow Leopard and Screen sharing question

    I followed the information in this article to use screen sharing between 2 SL computers and I can make the basic SS work.  However, two items from this article don't function as described.  It is an older article and I'm asking to see how it still applies to Snow Leopard users.
    http://www.macworld.com/article/131094/2007/12/screensharepower.html
    One item that doesn't seem to work is Bonjour Browser window.  Launching screen share doesn't automatically launch Bonjour Browser.  This is a small incovenience but it means I launch BB manually then cut and paste a device address from BB to SS.
    The second item is the terminal command to add additional items to the basic SS toolbar such as the button to capture the remote screen to a local file.  I've tried it but the additional buttons don't appear.  Are their other commans I could use to locally capture a screenshot from the remote machine to my computer?
    Are either of these features compatible in Snow Leopard?  If yes, how could I trouble shoot my setup to find out why an item isn't functining as described.
    Thanks!

    What did you do to make it work?
    In my setup, I am facing pretty much all the issues I saw on the forum around screen sharing. So from a Snow Leopard iMAC:
    1. I can't even get the black remote screen when trying to get access to another iMAC 10.6.1 system. In most of the case the connecting window stays on for about 1 min and than closes; the screen sharing application shows nothing connected. Once or twice I got a black remote screen and once I think it did work well. Tens of times it just did not connect. Console messages show errors with NetAuthAgent (even that file sharing and screen sharing are enabled on the remote Snow Leopard system and the file sharing was fine but connection is slower than with leopard).
    2. I can connect to a Leopard system but takes almost a minute to connect. I can access Leopard regardless of the screen sharing options and I never get a black remote screen.
    All systems are in a LAN. Before Snow Leopard upgrade the screen sharing connection was instant on all systems.

  • Video Chat and Screen Share Crash after a few seconds

    I currently have a Mac Pro and an 802.11N airport extreme. I can do a speedtest and get downloads of 14mbps supposedly.
    Whenever I start a video chat or screen share with someone (I just installed leopard tonight) It starts up and then after a few moments crashes and it wants me to send the error report to apple.
    What could be the issue? Is it a firewall thing? Hardware glitch?
    I have no idea, but would LOVE To get this fixed.
    Thanks

    I have the exact same issue. Apple has already replaced the Airport Extreme but that did not help. Any help or ideas would be appreciated.

  • AirPlay and Screen Share in AIM bug

    Mountain Lion has an annoying bug: when the sound output is an AirPlay device (my Zeppelin Air) and you start a screen share session in AIM, you cannot change the sound back to the computer. Even if I put headphones on, it won't switch the output. And the only way to get it back is to unplug my Zeppelin's power and close the Messages app on both computers - then I can get it to work fine.
    Anything I'm over looking?

    HI,
    I think you will need to report it here
    http://www.apple.com/feedback/ichat.html
    (The pages has some anomalies anyway
    It lists older versions of iChat but not the Machines to run them one
    It list OS versions  but they don't match the version of iChat they list either)
    I will also try testing later in the week (when I can get the iMac nearer to the Apple TV to use both)
    10:47 PM      Monday; September 10, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • IMessage & screen share question

    Why are so many options under "buddies" in imessage grayed out?  I am using the new operating system, Maverick.  I would like to be able to screen share but that option is gray so I cannot click on it.

    Thanks for the reply.
    Turns out, it was the fact that Mac A, was trying to use a user name with a capital letter, instead of all lower case. I hadn't noticed
    Thanks
    Matt

  • Mountain Lion, ARD Admin, and Screen Share Issue

    We recently upgraded one of our Labs to OSX 10.8.2.  The guy who teachs in that Lab then brought to my attention that he can no longer share his screen with computers in the Lab which are not logged in.  If the machine is sitting at the Login screen he cannot share to them until after the students login. Control works fine through ARD, but not sharing.  All clients have ARD version 3.6.2 installed.  ARD Admin is version 3.6.1 and I can replicate in other buildings/locations.
    Attempts to share with a 10.8.2 machine (one or many) which don't have anyone logged in will by all indications in ARD look like the sharing is happening on the Administrator machine, but you can visually see the screen is still sitting at the login prompt.  The display on the machine to be controlled flashes for a second when the Admin clicks Share and it flashes again when the Admin unshares their screen.  The same test run against a 10.6.8 client(still have a group in th next lab over) doesn't have the same problem.
    My initial thought was this may be some sort of feature, but I don't see any where to turn it off. I've searched around, but I don't think I'm searching with the right terms for this issue. Any thoughts?

    I've never been able to share my screen to computers that no one was logged in on; and i've been using ARD sense Mac OS X 10.4. I'm not saying it hasn't been possible; I've just never been able to get a computer to do that.
    My work around is use send unix command as user root. I have a unix script that basicaly triggures and applescript to type a user / pass to login of a generic account. it takes about a minute to run. and if some one is logged in, it dosen't do any thing to that computer.
    Heck it can even be set to be the default send unix command. so all the the user has to do is select all computers, click send unix, and click send.
    Some thing like this:
    if [[ "$(who | grep console)" == "" ]]; then osascript -e '
    tell application "System Events"
    keystroke return
    keystroke "a" using command down
    keystroke "PASSWORD"
    keystroke tab
    keystorke "a" using command down
    keystroke "USERNAME"
    keystroke return
    keystroke return
    keystroke return
    end tell';
    fi

  • Set Finder Layout and Size - Silly Question

    Hi Guys and Happy Late Valentine's Day!
    I have a really easy question regarding the size of the finder window. Every time I open a new window in the Finder, it is too small for my liking, so I have to resize it. Do you know how I can set a size for the window so that every time I open Finder, it is the size of my liking?
    ~Christoph

    You are right, that is exactly what happens. Unfortunately, this is how Leopard works. I personally liked the pre-leopard versions of Finder windowing. Sizes, position and views stuck. I have actually never really used the Finder icon for opening a new window. I'm a big fan of keyboard commands. Alt-Tab to switch between applications, in Finder: Command-N for new window, Command-Shift-A for the Applications window, Command-Shift-H for your home folder etc. With keyboard shortcuts, the windowing behavior will work like you want it to.
    There is no 'fix' for this, since this is how Finder is supposed to work. There might be a setting somewhere deep in the Finder application itself to change the default size. I don't know where it would be though.
    Sorry, I can't help any further. Maybe someone else will post on my idea in the last paragraph.
    D.

  • Two accounts and home share or one account with two iPads?

    I am in college and I have an iPad II but I am getting an iPad II for a course to use this semester. Should I set up another itunes acct or use the one I already have?

    ...my son-in-law who promptly set up a second admin account.
    So if the first Admin account still exists (you can have more than one account with Admin priveleges) its password will still be valid. Also from within that first Admin account, you can delete the second account created by your son-in-law, if you wanted to do that.
    Any software he installed should be in Applications and will still be accessible to all other accounts.
    Also be aware you can reset your son-in-laws Admin password as outlined here.
    OS X: Changing or resetting an account password
    That last option may be desirable.

  • New DSL connection prevents screen share, videochat

    Previously, I was able to videochat and screen share with a remote computer using ichat. With that particular remote computer, I was never able to use vnc or finder-originated screen sharing, so I've always relied on ichat.
    I switched from cable to Verizon's DSL internet service, and now I find that I can no longer screen share using ichat or use videochat. Sometimes my file sharing is also affected. I can also no longer access this screen from another computer from the finder, or access this computer as a file share from another computer.
    I have enabled file sharing and screen sharing in the sharing panel. The remote computer also has screen sharing enabled. I have mobile me service, which syncs ok, and I can obtain a shared screen from my office computer, although this seems to be available only now and then.
    Running ichat 4.0.8, OS 10.5.7 on both computers that I'm having trouble screensharing and videochatting between.
    Any suggestions?
    Thanks
    Todd

    Hi,
    I have seen one post that remarked that the end user thought Verizon were now blocking VNC connections and that their reasoning was to stop Internet attacks on Home computers.
    Seeing this is a common method for large companies to update remote computers particularly with Windows and is part of Apple Remote Desktop, And, that on all computers it has to be set to be allowed, this did seem a bit lame.
    If you know the IP addressing needed to get from home to your work computer then using vnc:// instead of afp:// in Connect to Servers will invoke the Screen Sharing App that is hidden away in Leopard in Hard Drive/System/Library/Core Services (I have only done this over my Local LAN and don't know how to set it up or address it over the internet)
    Your extras clues only seem to partially support the idea that VNC connections are blocked.
    If Video chat were not working as well I would look to whether the Modem is allowing Response to Internet (Anonymous) Pings as I know iChat sends a Ping in Video and Audio Chats (and the screen Sharing includes a Audio feed.)
    I would have looked on this site for more clues http://portforward.com/routers.htm as some of the Instruction pages include pictures that can be helpful in some cases.
    I don't see your model listed which may mean it is really new and has not made it to the list yet.
    Defcom either compared them a chose the most likely access defaults or found the info elsewhere.
    This one which may be the closest model number has no real pictures in this case
    http://portforward.com/english/routers/port_forwarding/Westell/D90-740010-06/iCh at.htm
    This page is from a D-Link emulator
    http://support.dlink.com/Emulators/di624revC/advfilters.html
    It is Advanced then Filters (The Yellow items)
    Do you have anything like this on your device ?
    Does anything appear to be set ?
    In this Tools and Misc page it has UPnP and other options that may need to be allowed. (WAN Ping Blocking is on this page for this device and it also has VPN stuff)
    These pages/links are for clues only as most manufacturers of modems and routers layout the pages differently.
    My thinking is that it is either something like a Firewall or filter or similar on the modem that need "Unblocking" in some manner to allow UPnP to "Fully" function or the ISP is doing something that they are not being too open about.
    8:05 PM Monday; August 3, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Cannot Video Chat or Screen Share, please help!

    Hi,
    I am trying to video chat and screen share with my mom, but I cannot get it to work. We both have Macbooks running Leopard, and we both connect to the Internet using AT&T DSL. She uses an Apple Airport Extreme router, while I use a Netgear Rangemax WPN824v2 wireless router. I think it is my connection that is messed up because I have brought my Macbook to a friends house and was able to video chat and screen share with my mom using my friends connection, so its definitely not her connection that is messed up. I have allowed iChat in my firewall, I have set both Quicktime and iChat video to 1 mbps. I really do not know what else to do. When I send her a video or screen share invite, it says "starting" and then "failed to receive a response." Here is the error log:
    Date/Time: 2008-01-03 21:45:34.388 -0500
    OS Version: 10.5.1 (Build 9B18)
    Report Version: 4
    iChat Connection Log:
    2008-01-03 21:44:58 -0500: AVChat started with ID 1759955414.
    2008-01-03 21:44:58 -0500: screenname1: State change from AVChatNoState to AVChatStateWaiting.
    2008-01-03 21:44:59 -0500: 0x18ab07b0: State change from AVChatNoState to AVChatStateInvited.
    2008-01-03 21:45:11 -0500: 0x18ab07b0: State change from AVChatStateInvited to AVChatStateConnecting.
    2008-01-03 21:45:11 -0500: screenname1: State change from AVChatStateWaiting to AVChatStateConnecting.
    2008-01-03 21:45:31 -0500: 0x18ab07b0: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-01-03 21:45:31 -0500: 0x18ab07b0: Error -8 (Did not receive a response from 0x18ab07b0.)
    2008-01-03 21:45:31 -0500: screenname1: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-01-03 21:45:31 -0500: screenname1: Error -8 (Did not receive a response from 0x18ab07b0.)
    Video Conference Error Report:
    20.426509 @SIP/SIP.c:2719 type=4 (900A0015/0)
    [SIPConnectIPPort failed]
    22.427824 @SIP/SIP.c:2719 type=4 (900A0015/0)
    [SIPConnectIPPort failed]
    Video Conference Support Report:
    0.557947 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
    [Connection Data for call id: 1 returns 1
    12.408520 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
    [Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
    12.416052 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
    [Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
    18.426150 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@rip:16402 SIP/2.0
    Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK3b1934533199417f
    Max-Forwards: 70
    To: "u0" <sip:user@rip:16402>
    From: "0" <sip:user@lip:16402>;tag=814737057
    Call-ID: 14fa057a-ba6f-11dc-ae5d-ca3d4ac44012@lip
    CSeq: 1 INVITE
    Contact: <sip:user@lip:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 729
    v=0
    o=MyName 0 0 IN IP4 lip
    s=0
    c=IN IP4 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:631872212
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:616286365
    18.926661 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@rip:16402 SIP/2.0
    Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK3b1934533199417f
    Max-Forwards: 70
    To: "u0" <sip:user@rip:16402>
    From: "0" <sip:user@lip:16402>;tag=814737057
    Call-ID: 14fa057a-ba6f-11dc-ae5d-ca3d4ac44012@lip
    CSeq: 1 INVITE
    Contact: <sip:user@lip:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 729
    v=0
    o=MyName 0 0 IN IP4 lip
    s=0
    c=IN IP4 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:631872212
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:616286365
    19.927166 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@rip:16402 SIP/2.0
    Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK3b1934533199417f
    Max-Forwards: 70
    To: "u0" <sip:user@rip:16402>
    From: "0" <sip:user@lip:16402>;tag=814737057
    Call-ID: 14fa057a-ba6f-11dc-ae5d-ca3d4ac44012@lip
    CSeq: 1 INVITE
    Contact: <sip:user@lip:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 729
    v=0
    o=MyName 0 0 IN IP4 lip
    s=0
    c=IN IP4 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:631872212
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:616286365
    20.427621 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@rip:35660 SIP/2.0
    Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK1ac966901073a0e4
    Max-Forwards: 70
    To: "u0" <sip:user@rip:35660>
    From: "0" <sip:user@lip:16402>;tag=1301205581
    Call-ID: 162b62cc-ba6f-11dc-ae5d-d96ac0724012@lip
    CSeq: 1 INVITE
    Contact: <sip:user@sip:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 735
    v=0
    o=MyName 0 0 IN IP4 sip
    s=0
    c=IN IP4 sip
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:631872212
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:616286365
    20.928131 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@rip:35660 SIP/2.0
    Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK1ac966901073a0e4
    Max-Forwards: 70
    To: "u0" <sip:user@rip:35660>
    From: "0" <sip:user@lip:16402>;tag=1301205581
    Call-ID: 162b62cc-ba6f-11dc-ae5d-d96ac0724012@lip
    CSeq: 1 INVITE
    Contact: <sip:user@sip:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 735
    v=0
    o=MyName 0 0 IN IP4 sip
    s=0
    c=IN IP4 sip
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:631872212
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:616286365
    21.928601 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@rip:35660 SIP/2.0
    Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK1ac966901073a0e4
    Max-Forwards: 70
    To: "u0" <sip:user@rip:35660>
    From: "0" <sip:user@lip:16402>;tag=1301205581
    Call-ID: 162b62cc-ba6f-11dc-ae5d-d96ac0724012@lip
    CSeq: 1 INVITE
    Contact: <sip:user@sip:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 735
    v=0
    o=MyName 0 0 IN IP4 sip
    s=0
    c=IN IP4 sip
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:631872212
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:616286365
    Video Conference User Report:
    0.000000 @:0 type=5 (00000000/16402)
    [Local SIP port]
    22.517595 @Video Conference/VideoConferenceMultiController.m:1476 type=5 (00000000/0)
    [IP And Port Data With Caller IP And Port Data: Obtained 120 bytes of local IP and port data (3 entries). Remote data was 0 bytes (0 entries).
    If anyone has any ideas, help would be appreciated! Thank you!
    Message was edited by: GuyCalledBob

    Hi GuyCalledBob,
    The Speedstream can route as well as the router you have been using.
    This means that most likely you have both devices being a DHCP server and the Speedstream may also need the ports open.
    The Site I linked you to shows limited pictures of the Speedstream set up pages and I can not tell if it it does UPnP from them. The Link does tell you how to Access the device in a Web browser.
    Before changing anything you need to access both devices and tells us which one(s) are being DHCP servers. Check the Speedstream menus for UPnP as well.
    You may need to make the Speedstream not do DHCP and Possibly use DMZ to make sure all ports are open to the router.
    The router will then need to be set up to use a Static IP to the Modem. Something like this pic although the actual IPs, DNS servers and Subnet Mask may be different.
    You will need to know the DNS servers from your ISP.
    I would guess you are getting Error 4 (Remote IP Invalid)
    9:09 PM Wednesday; January 9, 2008

  • Can't video chat or screen share with one person

    Hi, I can video chat and screen share with one remote colleague but not with another. When I try, I get the message 'Failed to start screen sharing because: Screen sharing could not be established' (and a similar message for video.
    He has a brand-new iMac with Leopard, so there is no compatibility issue.
    This would be very useful for us, can anyone suggest a solution?
    Thanks
    Phil

    There are various threads on getting iChat to work with various routers. There are a couple of Support docs that talk about it, but I always have trouble finding them, now.
    Use the 'more options' search function and show posts in the last year instead of the last 90 days, which I believe it defaults to.
    One thing I know of is Internet Sharing cannot be turned on. Another common problem is double-NATting, where their modem is serving out addresses via NAT and the Router is sharing those out on its own NAT. You should only have one running.

  • IChat - audio, video and screen sharing no longer work

    I use ichat video and screen share to visit with family and assist with computer work. Every since .mac changed to .me, I am no longer able to do anything but text message...... I have changed ports, changed from .mac to .me logins. But still not luck. Nothing has changed with routers. Working with cable modems and DSL..... Looking for help.

    Hi Bob,
    The Screen Sharing through iChat and the Audio only and Video chats do not require the AIM servers other than to say your Buddy is On-line.
    There is feedback from the AIM servers to say what capabilities your Buddies have.
    You can see these if you look at their Info card (Click on a Buddy and use Apple key and i together)
    Now if the Buddy does not show the capability then it may well be the AIM server.
    But..... IF you have turned off (or it has become turned Off) either of the Camera Enabled or Microphone Enabled items in the Video menu (from menu bar) then you will not have the capability and will therefore not see other people.
    One clue will be in the Buddies Menu about whether you can do One Way Video or Audio chats. If it says you can it is the AIM end.
    9:31 PM Monday; January 7, 2008

  • My macbook fell and since then a white screen with question mark appears

    hey guys!
    i really need to know what to do, my macbook fell while it was on. it froze so i restarted it, but the white screen comes in with the apple begining sound and everything but the screen stays blank for about two minutes and then a folde with a question mark appears. i tried putting in the cd that came with it, samething happened but after a while the appe sign appears and the computer started off my installation disc, so i try re installing everything, but when i get to the screen that asks to select a destination, there is nothing available.
    i realize that the best thing to do is to go to an apple store and then sort everything out, but i am in haiti where the nearest apple store is in miami, i really need your help and i'm desparate cuz i cannot do anything without my laptop... please send me your help as soon as possible.
    thanks in advance

    Your hard disk has been damaged. At this point, it will need to be replaced with a new one. You'll need to call AppleCare and they'll have you mail it in for repairs. I'm not sure what the usual turnaround time for that is internationally, but in the United States it's about a week. I'd tack on a few extra days to get the laptop to and from Haiti.
    Either way, your computer will need to be repaired and the data that was on your hard disk will be lost. (Unless you take the machine to a 3rd party repair shop that specializes in recovering data from damaged hard disks.)

  • Screen share and simultaneous web cam

    Hi all,
    I have a 7 day trial premium account.  When I make a video call and then share my screen, my video feed is then turned off.  Is this functioning as designed?
    When looking for an answer to this question I was under the impression that both screen share and web cam (from one caller) could be used simulataneously.
    I am using Windows 7 with Skype version: 6.11.0.102. My Skype app says this is latest version although it looks like 6.13 is now avaialble...
    Thanks.
    Solved!
    Go to Solution.

    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

Maybe you are looking for