Two materials with the same EAN

We use standard and promotional material code with the same EAN. The issue we should solve is that EDI recognises the material based on the EAN code. In the Order message I need material_1 during promotional period and material_2 when the promotion finished. Is there a flag somewhere in MM to block material for EDI orders? (Sales staff doesn't want to change the EAN code, so it will be the same for two materials.)

Also note that this type of configurtion may not be supported.
Just because a given configuration works in certain given conditions does not mean that it would be supported.
If this setup is for a configuration that has any value, please also Contact Oracle Support to get their inputs on what you are trying to accomplish.

Similar Messages

How do you stop your phone from creating two albums with the same photos after syncing?

When I first bought my phone I was able to sync my photos by checking the folder I wanted synced under iTunes. This put all those photos on photo library on my phone. I recently added more photos to that folder and tried to sync them it now put them in the photo library album and also created another album with my folder name. So I have two albums with the same photos. I tried in checking that folder in iTunes and of course they're not in my photo library. Please help. I don't want two albums with the same pics

This is how Apple has always handled photos. nothing has changed at all.
Just as your music is in your library and you can access those exact same songs from a playlist, all of your synced pics are in the Photo Library and those exact same photos (NOT duplicates) can be accessed from the album name that you chose to sync.

Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID?

Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID? SO i could iMessage if out from my iPod to my iPad at home to be viewed by a family member?

Look into using Apple Configurator. It's the easiest way to "reimage" and Manage iPads that I know of right now.
http://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
Also, look into using the Educational Volume Purchase Program, if you have not already done so.
http://www.apple.com/education/volume-purchase-program/

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

Two persons with the same screen name?

Am I seeing things, or here we have two persons with the same screen name?
http://forums.adobe.com/people/Federico_Plat%C3%B3n
http://forums.adobe.com/people/federico%20platon
(Yes, I know it's really two identities belonging to the same person, but to my eye both screen names look identical on screen; and I thought the system prevented entering a screen name already in use).

Jochem van Dieten wrote:
Claudio González wrote on 4/21/2010 9:53 PM:
Rick, I must confess that I had never thought of looking for participant's screen names down there. And I still find it curious that the accent is absent at the obvious position of screen names.
Have you ever considered investigating this sort of thing? Create a new
Adobe ID, change values for userID, screenname, firstname and lastname
on the Adobe side and see what changes on the Jive side? The logic may
turn out to be surprisingly simple.
No, I haven't and most probably I will not, at least in the foreseeable future. I have enough problems with my own account, and I waste too much time as it is on re-logging in, and on waiting for pages to load and messages to be posted, to indulge in such an investigation. Even if the logic behind two accounts that on screen seem to be associated with exactly the same screen name turns out to be exceedingly simple.

Sharing two folders with the same name

Hi all.
I have two folders with the same name and I would like to be able to share these under different share names. Problem is, this doesn't seem to be possible.
For instance, try doing this in File Sharing under Server Preferences:
* Click +, add /Data/Media
* Edit permissions on "Media" to permit guest access
* Click +, add /Volumes/Drobo/Media
* Edit permissions on "Media" (make sure you click the right one!) to permit guess access.
This appears on the surface to work, but what it has actually done is to delete the share for /Data/Media. If you exit the File Sharing pane and go back into it again, it will be gone.
Server Admin has the ability to rename a share's name from AFP,SMB,FTP,etc. but this doesn't appear to help either -- I tried adding the second media first, renaming its shared name to Media2 over in Server Admin, and then adding the first. Server Preferences just deletes the second one.
Such a basic thing as being able to rename the share from Server Preferences would appear to be enough to get around this, but since Apple didn't make it possible, I have no idea how to proceed.
Does anyone else have this working, and how did you do it?

The best way to solve this, would be make sure you use database paraneter GLOBAL_NAME, to change your database from lets say orcl1 to orcl1.mycorpdomain.com, by this you can make sure each database actualy has a different name. Your other database then could be named orcl1.example.com.
When chaning the display name in EM you might face other issues later on when for instance trying to run a restore using EM for one of these databases.
Regards
Rob
http://oemgc.wordpress.com

Can I have two LANs with the same IP route to each other

Hi there,
I have a customer who has a televantage voip network on a private 192.68.0.0/24 network but has two sites connected via a wireless tower that wants to enable QOS over between the two sites by using a 2621XM router at each end. I've enabled QOS on both routers for voice and video but haven't deployed this yet since I'm not sure if I need to change one of the sites networks to a different network number since I'll have the routes in place with a 192.168.1.0 on the WAN side. If both remote networks stay with the same number scheme of 192.168.0.0/24 will they be able to find each other when requesting where a remote 192.168.0.0 host is or do I need to change of the offices networks to a 192.168.2.0 network to make this work? Sounds kind of basic but before deploying I wanted to get some input...thanks.

Routers cannot route unless the address blocks for each interface are different.
If you have two sites connected by any kind of link, and you'll use one site as a gateay to the Internet, then you'll need at least four different addresses/ blocks:
The 'b' site LAN, i.e., fa/0/0:192.168.0.0/24
The 'b' site WAN (interconnecting link), i.e., fa0/1: 192.168.1.1/30
The 'a' site WAN (interconnecting link), i.e., fa0/1:192.168.1.2/30
The 'a' side LAN, i.e., fa0/0:192.168.2.0/24
(assumes that your wireless link is acting as a bridge or non-routing link) - the fa0/1 device connects to the wireless devices).
If you use the same router on the 'a' side for the interconnecting link for both the 'a' LAN and the Internet gateway, then the third interface would be your Internet WAN address.
The 'b' side LAN interface is your 'b' side default gateway for you clients
The 'a' side LAN interface is the 'a' side default gateway for your clients
Set a default gateway on the 'a' router to the ISPs Default gateway / next hop address.
If you're using a third router for an Internet gateway, then the LAN interface address becomes the default gateway for the clients on that LAN, and you'll need to set up a static route pointing to the other LAN in the routers that connect the two LANs..
A routing protocol may be useful but, depending on your actual bandwidth available, it's probably better to just set up static routes (no routing protocol bandwidth utilization).
The /30 for the WAN link gives some economy of address usage, but it may also secure the link better, since there are no additional addresses for the intruder to use; they'd have to spoof one of the two valid addresses (.1 & .2) as well as crack your encryption (and / or other security).
There's an armload of other possible configurations / topologies / address schemes, I believe this one would be reasonably common.
The bottom line is that a router can only route from one address block to another. In order to pass traffic between two segments with the same address block, you need a bridge / switch, or some other layer one/two device (like a wireless transceiver pair).
Good Luck
Scott

Can two ipods with the same email address face time independantly?

Can two ipods with the same email address face time independantly?

Hey Bumblebee, To each other, no-- would be like trying to call yourself on the same phone. To different persons on other devices??? Not sure you'll have to try, I'm guessing if both are online you may well dial up on both, (once had the same address on the my computer and iPod, both would ring when called, this stopped when I changed the iPod's address). If you change one of the iPod's e-mail address you should be fine. You'll have to do a little experimenting. Hope this helps, Good luck. Cheers.

Can I authorize two computers withe the same iTunes

Can I authorize two computers withe the same iTunes

Yes, you can authorize two computers with the same Itunes Account.

I have two iPhones with the same apple ID, can I change one?

I have two iphones with the same Apple ID. Can I cange one?

Settings > iTunes and App Store > Apple ID = Sign Out...
Then Sign In using the preferred Apple ID.
Note:
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622

How to put two files with the same name into the same folder?

How can I put two files with the same name and the same extention into the same directory?
Is this even possible?
Thanks in advance.

Are you sure? I would be very surprised if that was the case.
How does the computer/filing system differentiate the files, if not by their names?
How do you tell the computer which one you want? (On the command line.)

PLEASE HELP. Two computers with the same External IP Address

I have two computers with the same IP address which is causing problems. I tried to ipconfig/release ipconfig/renew but I get the error "No operation can be performed on a Local Area Connection* 11 while it has its media disconnected.
I tried resetting router/modem, made sure "Obtain an IP address automatically" are all enabled. DHCP is enabled.
Two of the computers have the same one and the other IP is completely different (not 1 or 2 off). When I open the router settings and click DHCP Reservation it shows the IPs 1 number off and all different like you said. i.e ***.***.*.106, ***.***.*.107,
***.***.*.108. But with the proxy service I'm using, when trying to allow each computer to use them it shows different IP addresses than what is shown in the DHCP Reservation.
If I clone my MAC address the identical IP of the two computers changes but they'll still share the same IP. The third doesn't change.
I tried ipconfig /release - ipconfig /renew - ipconfig /flushdns nothing yet. Not sure about your #2 and #3. And I just updated my firmware.
Anyone with expertise? Thanks.

Cyber_Defend_Team and ZigZag3143x I powered down all three computers and turned off/reset the modem and router.
I restarted them one by one and after, the two computers with the conflicting IP address changed their IPs but their IPs are still conflicting. The third computers IP stayed the same.
What else can we do?

Wrong error message when two instances with the same PK are created commited

I accedently created two instances with the same pk and I got wrong error.
Took me a while to figure out what's going - I use multiple fields mapped on
the same column a lot but not in this case
kodo.util.FatalUserException: User errors were detected when flushing to the
data store. The getNestedExceptions() method of this exception will return
an array of the specific errors.
NestedThrowables:
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 3", "Small Business Review" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 5", "JOFOC Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 1", "RFC/AP Received" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 4", "JOFOC Submitted for Review"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 6", "FedBizOpps Announcement"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 2", "RFC/AP Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:721)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
NestedThrowablesStackTrace:
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 3", "Small Business Review" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 5", "JOFOC Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 1", "RFC/AP Received" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 4", "JOFOC Submitted for Review"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 6", "FedBizOpps Announcement"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 2", "RFC/AP Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
Process terminated with exit code 0

Thanks for the report. I've recorded the bug here:
http://bugzilla.solarmetric.com/show_bug.cgi?id=705

Two database with the same sid but different ORACLE_HOME on one host

two database with the same sid but different
ORACLE_HOME on one host,and if configure them with
two differnt lisnter staticaclly,this abosultely work
because in the lisnter.ora we must provice
ORACLE_HOME variable,with this ORACLE_HOME the client
can differentiate which database to connect,but if
use dynamically register feature,how can the client
tell which database to connect?

Also note that this type of configurtion may not be supported.
Just because a given configuration works in certain given conditions does not mean that it would be supported.
If this setup is for a configuration that has any value, please also Contact Oracle Support to get their inputs on what you are trying to accomplish.

Two materials with the same EAN

Similar Messages

Maybe you are looking for