Two measures with Different filters in a query
Hello,
I have requirement where I have two measures in a query and have to filter those measures differently based on month. Like For actual values, I want to restrict the data as per end user selected parameter but for Plan data, I want to show till the end of
the year. Eg. If user select July 2014 as month parameters then we have to display Actual data from Jan 2014 to July 2014 where for Plan, I have show data from Jan 2014 to Dec 2014.
Here is an example of query which works in Management studio but does not work in query designer for ssrs:
SELECT NON EMPTY
{ ([Measures].[actual]*[Date].[Year to Month].[Month]),
([Measures].[plan],ANCESTOR(strtomember("[Date].[Year to Month].[Month].&[2014]&[7]"),2).FIRSTCHILD.FIRSTCHILD:strtomember("[Date].[Year to Month].[Month].&[2014]&[7]"))} ON COLUMNS,
NON EMPTY
( [Date Calculations].[Date Calculations].AllMembers )
} on ROWS
FROM
[abc]
I want a functionality similar to this query replacing data parameter with date prompt. How do I do this kind of stuffs in query designer?
For multiprovide scenario that's ok if you didn't have same key figures between them,
but your record in report will be doubling.
Have you try infoset? Check this link:
[http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm]
Regards,
Steph
Similar Messages
-
How to compare two rows from two table with different data
how to compare two rows from two table with different data
e.g.
Table 1
ID DESC
1 aaa
2 bbb
3 ccc
Table 2
ID DESC
1 aaa
2 xxx
3 ccc
Result
2Create
table tab1(ID
int ,DE char(10))
Create
table tab2(ID
int ,DE char(10))
Insert
into tab1 Values
(1,'aaa')
Insert
into tab1 Values
(2,'bbb')
Insert
into tab1 Values(3,'ccc')
Insert
into tab1 Values(4,'dfe')
Insert
into tab2 Values
(1,'aaa')
Insert
into tab2 Values
(2,'xx')
Insert
into tab2 Values(3,'ccc')
Insert
into tab2 Values(6,'wdr')
SELECT
tab1.ID,tab2.ID
As T2 from tab1
FULL
join tab2 on tab1.ID
= tab2.ID
WHERE
BINARY_CHECKSUM(tab1.ID,tab1.DE)
<> BINARY_CHECKSUM(tab2.ID,tab2.DE)
OR tab1.ID
IS NULL
OR
tab2.ID IS
NULL
ID column considered as a primary Key
Apart from different record,Above query populate missing record in both tables.
Result Set
ID ID
2 2
4 NULL
NULL 6
ganeshk -
i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?
Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432 -
Can I use iCloud to sync two devices with different apples Ids?
Can I use iCloud to sync two devices with different apple ID's
What do you mean by "apple ID"? There's an ID you can use at the iTunes store to buy songs, apps, etc. there's an ID you can use for your iCloud account - the two can be different or the same. So which service are you referring to when you talk about an apple ID?
-
Can I sync two ipods with different ID on the same computer?
can I sync two ipods with different ID on the same computer?
Hi,
Yes you can as long as you have two seperate user accounts on your computer. Hope this helps.
xxmitchxx90 -
Can I sync two iPads with different users and email addresses on the same computer
Can I sync two IPads with different users and email addresses on the same computer.
yes, just make sure you turn off auto-sync to keep everything organized before you try syncing
on a pc
edit > preferences > devices - 'prevent ipads, iphones, and ipods from syncing automatically' needs to be checked -
I have two iphones with different phone numbers that I use. I have one of them set up on icloud now, but do not know how to set up my second device on icloud. Both of my iphones use my same Apple ID for purchases, etc. Is there a simple way to add a device to my icloud account? Thank you in advance for any help someone may be able to give me.
To move one of the phones to a different iCloud account (if that's what you want to do), go to Settings>iCloud and turn all synced data to Off. When prompted, choose to keep the data on your iPhone. After everything is off, scroll to the bottom and tap Delete Account. This will delete the account from the phone but not from iCloud so the other phone will not be effected. Then set up a new iCloud account with a different Apple ID and turn iCloud syncing in Settings>iCloud back to On. When prompted, choose Merge. This will upload the data to the new iCloud account.
You will then have to go to icloud.com and sign into each iCloud account separately and delete any unwanted data that you don't want on the phone syncing with each account. -
Hello Apple Community,
Can I backup two devices (with different documents) to one iCloud account?
For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud). Is this possible?
This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
iphone backup.
Thank you in advance!Terminology check here. Do you really mean a "CD"? There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
Read references for Home Sharing.
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
The above can get pretty complicated. You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content. -
I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad which will be replaced with the photos on my IMac.You see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac. Is there and app available to do the former. many thanks. b
The iPad and related software is designed to sync with only one computer. I suggest transferring the photos from one of your iMacs to the other so that all photos are on one Mac. Same for all other files you want to sync over.
To get those AppleWorks files to the iPad you'll have to determine if Pages will open them. If it will then use the file sharing feature of iTunes to copy them to Pages on your pad.
If Pages will not open the AppleWorks files directly you'll have to save them in some format that Pages will read. These include but may not be limited to Pages and Word formats. -
Hi all. Sorry, english is not my native language. I´ve made an .indd: each page has two columns with different threads (is a bilingual text). When I export this .indd to .epub only appears one column from a thread following the next thread. What can i do to fix this? My indesign is CS6
Thank youThere are fixed format EPUB files as can be used for children's books, etc. where there are a lot of illustrations. However, those are very work-intensive to produce. I've never worked on one.
Anne-Marie Concepcion did a Lynda.com video on producing one.
Rorohiko produces a product called ePubCrawler which can help in produced fixed format EPUB files:
Fixed Layout EPUB Assistant In InDesign: ePubCrawler | Rorohiko ... -
How do i run two threads with different sleep times?
How do i run two threads with different sleep times?
Ive got thread A and thread B, they both update a jpanel.
They both start when i press the start button.
However thread A updates every 250ms and thread B updates every 1000ms. i cant just run them both at 250ms becuase this will mess it up.
So for every four runs of thread A i want thread b to only be run once
Does anyone know how to do this?
Thanks, Ant...ok, ive done it but now i cant stop it!
ive added buttons to start and stop, the start button works but the stop button doesnt. why doesnt "t.stop();" work?
public void run() {
while(t == Thread.currentThread()) {
System.out.println("No " + t.getName());
if (t.getName().equals("1")){
try {
t.sleep(1000); // in milliseconds
} catch (InterruptedException e) {}
} else{
try {
t.sleep(250); // in milliseconds
} catch (InterruptedException e) {}
} -
Two tables with different filter values base on a analysis
Hi guys,
let assume that I have a analysis with columns : group_id and sales.
Based on it I would like to create two tables : table1 where group_id =1 and table2 where group_id = 2.
Is OBIEE capable of doing it?
Regards,
SlaviHi Slavi,
You can do that in single analysis, but you need to have the group_id column two times.
That is, bring group_id_1, group_id_2 (same column), sales
Now in table 1,
bring group_id_1, sales
Then in selection steps for group_id_1 -> Select Members -> Action choose keep only -> choose the filter value 1
This will filter the table 1 with group_id 1
In table2 bring group_id_2, sales
Then do the same step for group_id_2 with value 2.
now in same report you have two reports with different filter.
If you want you can keep the same column name for both group_id columns, I just kept group_id_1, group_id_2 for easy reference. -
Revision: 13716
Revision: 13716
Author: [email protected]
Date: 2010-01-22 09:26:12 -0800 (Fri, 22 Jan 2010)
Log Message:
since include-read-only is a server global setting, we can't have two channels with different value. remove the test for the include-read-only false. update the service-config.xml as well.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ReadOn lyTest.mxmlYou can give this a try on your Ultimate machine. While these are said to be for Vista, I used it on my Win 7 machine just fine and it fixed the problems I was having. Hope it works for you.
The problem is that Vista, by default, will only use NTLMv2 for authentication, which is not supported by Mac OS X's Windows Sharing service.
The other problem is the Minimum Session Security for NTVLM SSP based Clients.
To get around this:
1. In Vista, open the Control Panel
2. Switch to "Classic" view
3. Double-click Administration Tools
4. Double-click Local Security Policy
5. Or Secpol.msc
6. Expand "Local Policies" and select "Security Options"
7. Alternate : Type secpol.msc to get editor up then
8. Locate "Network Security: LAN Manager Authentication Level" in the list and double-click it.
9. Change the setting from "Send NTMLv2 response only" to "Send LM & NTLM - use NTLMv2 session if negotiated"
10. Network Security: Minimum session security for NTLM SSP Based (including secure RPC) Clients
11. Change the setting from "require 128 bit" to unchecked (No Minimum)
12. Click OK
the real difference between vista and windows 7 procedure is 10 and 11 -
Multiprovider - two infoproviders with different levels of summarization
Hi Gurus,
I need to create a report which requires data from two infoproviders, I am thinking of building a multi provider on top of the two infoprovider . I wanted to know if its possible to create a multiprovider on top of two infoprovider with different level of summary. Any suggestions with be very helpful for me.
Kindly let me know..thanks in advance...
cheers,
TuckHi
Two different level of summarization will throw inconsistency in reporting
It is not advisable
Regards
N Ganesh -
How to combine two applications with different workspaces in APEX
Hi,
Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
Thanks in advance,Hello Satya,
>> I am Satya …
Please take one more step to help us and update your forum handle to something friendlier than user123… Thanks.
>> Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
This is not a trivial task.
You didn’t mentioned if both workspaces sharing the same APEX instance, or they are on two different instances (machines). I believe the latter is a pre-condition to a success.
First you need to remember that importing an APEX component, like a single page, is possible only to the same application that it was exported from. This is still valid if you have the same workspace on two separate APEX instances – one is an import of the other (which makes it an identical copy). Still, the application ID must be the same, or you’ll get the following error: “This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application.”
You can’t simply manipulating the export file, if the two workspaces are sharing the same APEX instance, as all workspaces on the same instance shares the same APEX metadata files, and you’ll receive a “unique constraint violated” error messages. That means you can’t import one application into the workspace of the other, even if you are using a different application ID.
As far as I can see, the only viable way of doing an application merge is to have two identical workspaces, on two separate APEX instances. The two applications should share the same application ID, although this parameter can be changed in the import file. You should export the page in one application – on the first instance – and import it into the other application – on the second instance.
You should also make sure that the exported page ID doesn’t exist on the target application, otherwise it will be replaced by the new imported page. Also, if the imported page include references to shared components that are not defined on the second application, it might also pose a problem.
As I said, this is not trivial. The benefits are mostly depend on the amount and complexity of the pages you want to merge. If they are not many, and simple, you should consider just re-creating them on the target application. If they are very complex, the merge might fail anyway.
Regards,
Arie.
Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
Maybe you are looking for
-
Unable to debug any application after upgrading to Reef Shark and Update 6
Hi, Since I upgraded to Reef Shark and consequently also installed the update 6 I can't access the deployment server. None of the applications show up in the broswer, nor does the admin-console for the server. I get the following exceptions in the br
-
Back-up on external drive, in addition to the time machine external drive
Quick question: I am using Time machine on an external drive next to my laptop. To protect against fire/theft, I want to do a monthly back up on an other external drive which would be kept at work. Does time machine allow 2 external back up drives an
-
I cant decide which TV to buy can you help
I want to get a new TV and wanted to spend around $600. I am thinking about one of these two. one is 37 inches and the other is 40. besides the screen size what is the differences between these two and do you think it would be better to spend the ext
-
I applied the patchset 2228622 and I've got the next error when I try to startup the database: ORA-00439 feature not enabled: Parallel server.
-
Screen wont work on the right side.
So, I've had some time with my phone, alot of damage has been done screen-wise (cracks, glass peeling, ect.) , and even some hardware is showing, but it still functioned properly. About thirty minutes ago, I set the phone down, and when I picked it b