Two MFU in one LAN, one office

Good day for all.
I have two MFU HP LaserJet M1217nfw in my network. they have 192.168.1.54 and 192.168.1.56 adresses.
After I install drv 20130814_v5.0_fullDrv for each MFU i can SCAN ONLY FROM LAST INSTALL MFU.
I try old versions of drivers, different versions if drivers for each MFU - but nothing help.
Have you solved that trouble?
P.S. Sorry for bad english

Hello Flakon152,
Welcome to the HP Forums!
I understand you have two Laserjet M1217nfw printers, but you can only scan a document from one. I will do my best to assist you! First, I need to find out what is your operating system on your computer? Windows or Mac?
If you have a Windows computer, you can add a device (This will add two printers in Devices and Printers). Click on your Start Menu>Click all Programs> Look for the HP Folder> Click on your printer> Click on Printer setup and software> Add a new printer, then click on Wireless.
You can type in one of the IP address, as this will connect your second Laserjet printer. Once you have the two printers installed in Devices and Printers, you can click on either one to access scanning capabilities.
Please post your results, as I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.

Similar Messages

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me. Only have a problem with one. Is there a fix?

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me between the locations. Only have a problem with one that inappropriately ejects when the Air sleeps (and only sometimes). Is there a fix? I've read others who believe that the problem is with the operating system (I'm using 10.9.2). But my problem suggests that it's with one of the LaCie's. Any suggestions about how to fix?

Lacie doesnt make HD, thats a Seagate inside the box.
Is there a fix?
Yes, get a 4TB max HD, 6TB drives are both new and have known issues, ...in fact so do most all 4TB drives.
my problem suggests that it's with one of the LaCie's
You mean Seagate
Large external hard drives are great! Large external hard drives are horrible
It is a common premise that people are overjoyed at the dropping prices per terabyte on external hard drives, and the first thing that enters most peoples minds is "great, I can put all my stuff on one drive,... all of it!" However considerations need to be made in creating a giant single choke point for not mere data loss, but seriously large data loss. If there is at the very least yet another redundant copy, this is fine, otherwise do not consider it whatsoever. Some 3TB and 4TB drives of all mfg. have, at the time of this writing, reliability concerns currently and best recommendation is staying at 2TB drives or less.
Advantages and disadvantages of larger 3TB and 4TB external drives must be weighed

Can I have two Domain in one network?

I have two Server in my office in same network.
Server A is Active Directory / Domain Server. Certain user join domain and connect to this server.
Server B is File Server. The other user just use Workgroup. But now this server want to Up Domain to be Domain Server.
But user that connect to the domain Server A will not connect to domain server B and user connect to domain server B will not connect to domain server A.
Is there any problem if I setup two domain in one network?
Please Advise.

Domains are logical structure of your network. Yes you can create two domains in the same network. One thing you should consider in this scenario is trusts between your domains. By default separate domains have not any trusts between each other and you should
establish trust manually if you would like to have users in A authenticated in domain B.
Regards.
Mahdi Tehrani Loves Powershell
Please kindly click on Propose As Answer or to mark this post as
and helpfull to other poeple.

Can I connect two computers to one device?

Can I connect two computers to one device? I am trying to have them control different aspects of the experiment that I'm running.

That depends upon the device. If it's GPIB, you could
use the E-NET card to convert it to LAN. That would
allow control by many computers. The only problem with
that might be sychronization. That is, Computer 1 does
its setup. Then Computer 2 does a reset. Compuer 1's
setup is now gone.
As another poster suggested, you could always network
between the two computers.
[email protected]

I have two airport extremes, one acting as amodem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable. How do I know if they are operating wired or wirelessly

I have two airport extremes, one acting as a modem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly? I want to know as I assume I will get much better speeds if they are wired.

Hi Bob, many thanks for the prompt response. I think I did what you suggested, but you're the expert so I have sent over a few screenshots. The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time). My new home office is going to be in the garden, circa 100 feet from the main house. I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily. Everything works well, so I was surprised when I unplugged the ethernet, that it still worked. I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly.
Many
Thanks, Greg.

Two Routers off One Cable Modem?

Can I run two routers off one cable modem, one a hardwired Windows network and the other an Airport Extreme networking a Powerbook G4 and wireless printer?

No you cannot - unless you pay your cable internet service provider for two public IP addresses.
What I would suggest if you already have the base station but have not yet purchased the router:
- connect the cable modem to the Base Station's WAN port
- buy a 4- or 8-port ethernet switch. Connect to the switch the LAN port of the Base Station, and all of your hardwired PCs
What I would suggest if you already have a router and base station:
- connect the cable modem to the router's WAN port
- connect all the hardwired PCs to the router's LAN ports
- connect the Airport Base Station to one of the router's LAN ports, and configure the Base Station to function as a wireless access point per http://discussions.info.apple.com/webx/.59976caa

Two WRT54G routers One DSL Connection?

Thank you for reading my request.
Situation: I have one Internet connection and I have need of two networks. One filtered with OpenDNS and the other unfiltered. I have a Speedstream DSL router provided by ISP for connecting to Internet. I have two WRT54G's and would like to utilize them to form two networks. The Speedstream is a router with a gateway address of 192.168.1.254.
From that Speedstream (only one network plug) I would like to go to a 5port switch. From that switch, I would like to configure the two WRT's to be two different networks (one using OpenDNS settings for filtering) with one having a 192.168.1.x address scheme and the other (no Internet filtering) having a 192.168.10.x scheme. Both would have DHCP enabled for their networks and the Speedstream would have DHCP disabled. There is not a need (at this point) to have the networks communicate.
Is this possible and if so, is there some semblence of a walkthrough for it?
Thank you again for reading my request.

Yes, this setup is possible. As long as the modem will be able to support more than one connection, then you may connect the 2 routers thru the switch.
The only thing that I see as a possible concern is about double NATting. If ever there is a need for you to open any ports in the router, then you will have to do double port forwarding or open a port in both the router and modem.
You may check this link how to cascade routers (follow Cascading a Linksys Router to a Linksys Cable Gateway with Internet-to-LAN Connection):
http://homekb.cisco.com/Cisco2/GetArticle.aspx?docid=d4bfc9fde5284a4b845c9057ffbeb644_4735.xml&pid=8...

Two Accounts in One iTunes?

Is there a way to have two accounts all appearing in one iTunes window and syncing with one iPod?
I sometimes want to download audiobooks for professional purposes and use my work credit card, yet most of my downloads are of music for personal use. It would be great if I could switch between two different credit cards.
This is VERY important if I get an iPhone, as I plan to do in the next few weeks. My company (well, a church; I'm a minister) pays my mobile phone bill. I really don't want to have that on my personal credit card every month, then have to turn it in to our office manager for reimbursement.
So, two accounts would seem great, but then do I have two "iTunes" on one computer?
Craig

Just use iTunes.
When you log in to make a purchase, simply use the appropriate iTunes Login ID (work or personal).

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

How to configurate system for two database under one server

Hi Friends,
I installed abd created A database by oracle 10GR4 in window 32 bit 2003.
it works.
Then i created other B database by DBCA under this server.
When I shutdown immediate database.
it works well. But I can not startup mount ot startup A database again,
I got below message as
SQL> startup mount;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
From EM, I saw as
A listen Status Up
LISTENER
Oracle Home
C:\oracle\product\10.2.0\db_1\BIN
Location
C:\oracle\product\10.2.0\db_1\BIN\network\admin
BUT agent connect Status
Failed
Details          ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
A database instance down
Host     salerpt.net
Port 1521
SID SALERPT
Oracle Home C:\oracle\product\10.2.0\db_1\BIN
Also I try to connect as
SQL> connect sys/salel@salerpt as sysdba;
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Form EM, I saw listen start up.
Then I stop it. then restart it
I can saw B db listen and can not see A db listen.
also
I saw that other B database works.
My listen info as***************
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1\BIN)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = SALERPT.NET)(PORT = 1521))
I check physical, two database use one common bin directory .
I do not have any experience to handle two database under one oracle server.
How to check and configurate DB server system?
Thanks for help.
Edited by: user589812 on Jan 4, 2009 8:17 AM

Jim,
Before starting the database A, did you set ORACLE_SID=A from command line? You can run as many instances you want from single server provided you enough memory, processing power. Also try starting your instances usign window services and check and post some lines from alert.log for database A.
tnsnames.ora entry
DATABASE_A =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DATABASE_A)
DATABASE_B =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DATABASE_B)
)Regards
Edited by: OrionNet on Jan 5, 2009 10:55 AM

I have an iPhone 4, My itunes are from two differnt accounts; one from when I was under my dads account, and the other is my own. My question is would I be able to sync and update my itunes on my MacBook without having all the new music erased.

I have an iPhone 4, My itunes are from two differnt accounts; one from when I was under my dads account when i was younger, and the other is my own which i currently use. My question is would I be able to sync and update my itunes on my MacBook without having all the new music erased. I have the icloud on my phone, but I just want to update my music on my laptop. Just nervous to, because it has happened to me before on a desktop computer and it *****. Please help! Thanks.

nevermind, i figuered it out

About combing two array into one

Hi all,
I post a questiona bout converting an array of integer into char (byte) array and I got a solution already http://forums.ni.com/t5/LabVIEW/how-to-display-char-code-properly/m-p/2596087#M780368
However, I enouther another problem while dealing with an array of U16 type. I would like to extract the high and low byte from numbers (U16) stored in array. I extract the high and low byte for each U16 number and convert them as char, concatenate them to a string. Repeat this process for each element in the array so to get a big string with each element is a char for high and low byte. My code is enclosed as follows
It works fine but I am concerning the speed. Is that any other way to do it fast and don't use loop (in real case, I will deal with pretty big array many times, efficiency is a problem). Note that the high and low bytes array extracted from the original array with the module Split number.vi, but how can I combine these two array in one code with data arranged as high-low-high-low ... ? Thanks.
Solved!
Go to Solution.

PKIM wrote:
However, I enouther another problem while dealing with an array of U16 type. I would like to extract the high and low byte from numbers (U16) stored in array. I extract the high and low byte for each U16 number and convert them as char, concatenate them to a string. Repeat this process for each element in the array so to get a big string with each element is a char for high and low byte. My code is enclosed as follows
It works fine but I am concerning the speed. Is that any other way to do it fast and don't use loop (in real case, I will deal with pretty big array many times, efficiency is a problem). Note that the high and low bytes array extracted from the original array with the module Split number.vi, but how can I combine these two array in one code with data arranged as high-low-high-low ... ? Thanks.
You need to be more clear.
Looking at the code, you are dealing with I16, not U16. Also your index array primitives could be replaced by autoindexing. Your use of the feedback node only makes sense if you want to append strings forever with stale data, thus growing data structures without limits. If you only want to convert the current data, remove the feedback mode and use a "concatenate strings" with a single input. A for loop is one of the most efficient data structures and using it is not a problem. One way or another the code needs top oerate on all data.
All that said, I agree with Tim that most likely all you need to do is insert a typecast after the "to I16" and eliminate all other code.
LabVIEW Champion . Do more with less code and in less time .

Hi. I am having an issue with music on my Ipod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one wi

Hi. I am having an issue with music on my IPod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one with only Islands on the Coast, and the other having Islands on the Coast with 3 other songs. If I delete the album with only one song from my IPod, it deletes the song from the other "album" as well. If I go to "All Songs" by Band of Horses, it only shows one Islands on the Coast, so it is not a duplicate issue. Also, in Itunes, it only shows one album. I just recently updated to iOS5 on my 4th Gen IPod Touch, if that helps.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

WinXP with two users - can we have two separate iTunes, one for each user?

Question: On my Dell WinXPPro SP3 desktop with two users (myself and my wife), can each user have a separate iTunes - so what each of us does with iTunes has no effect on the other?
Details: Yesterday, June 29 2012, I bought a new iPad 3 with WiFi only, my first Apple product. My #1 motive for buying it is to copy movie files (avi, m4v, mp4, etc.) from my WinXP setup (PC plus hard drive) to my new iPad to watch the movies in bed on the new iPad. I understand that I shall need to install iTunes on both the iPad and the PC in order to move or copy the existing movies from the PC side to the iPad. (I also understand that I won't be able to use iCloud because iCloud will not run on WinXP, only Vista and Win7.) [By the way, if iTunes will NOT help me do what I want to do, please let me know. But that is not my question.]
I am only one of two users on the PC. My wife is the second user on the PC. She already installed iTunes on the PC for her own use. She is an avid iTunes user. Most of the time, she does not use this PC. She has her own WinXPPro SP3 Dell laptop, which is what she uses 99% of the time. She has also had an iPod for some time, hence her use of iTunes. And now, for the last two weeks, she also has a new iPhone 4S and her own iPad. So her use of iTunes will grow. The important point is the following - whatever I do on my side, I do not want to interfere with or disrupt her use of iTunes. Not even for a second.
So, can I install or re-install or somehow set up iTunes on MY user on the PC so that it does not in any way use or affect her iTunes? If the answer is "yes", please give me a step-by-step and list all details. Is there a YouTube that shows this specifically?
More details: Right now, in C:\Program Files, before I have tried to install anything myself, there are already folders for Apple Software Update, iPod and iTunes, which derive from my wife's installations of these Apple programs some time ago. I have just now run the Apple Software Updater, which first updated itself on this PC to version 2.1.3.127 and then updated her iTunes on this PC to version 10.6.3.25. (As a result, the following processes/services are now running, which normally don't run when I am the user:
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\iTunes\iTunesHelper.exe
Also, the following processes will launch the next time I reboot this PC (which normally don't launch when I am the user):
C:\Program Files\Common Files\Apple\Apple Application Support\APSDaemon.exe
C:\Program Files\iTunes\iTunesHelper.exe )
My wife says her iTunes is NOT set for Family Share. (That sounds correct to me, for now and forever.)
Summary: So, how do I install iTunes for myself (for the first time) for my user on this PC so it does not - even for a second - interfere or affect my wife's use of her iTunes on all of her devices?
Thanks !!!

Mr. Wiclee - thanks for the link.
When I said I had not "installed" iTunes on my iPad, I suppose I meant I have not yet signed in to iTunes, ever. I suppose when I sign in to iTunes the first time on my new iPad, I will be required to create a new iTunes account? Then refer to such new iTunes account when I launch iTunes for the first time on my PC as myself? Or will I still need to use Method Three in your link?
The crucial thing is this - when I turn on iTunes on the PC for the first time with me as User, I do NOT want it to connect to my wife's iTunes account. On my PC, I would want iTunes to ask me who I am, so I can then sign in with my new iTunes account that I had just created on my iPad. How can I be sure to accomplish this goal?
In my PC, if I look at Documents and Settings and compare the two folders for we two different users, one for me and one for my wife, I can see that my wife's has Application Data and Local Settings for her various Apple programs. However, so do I in my User even though I have not yet installed any Apple programs on my side. I am concerned that when I finall launch iTunes when I am user, it will open up in my wife's iTunes account, which I truly want to avoid.
Thanks. Please advise.

Two MFU in one LAN, one office

Similar Messages

Maybe you are looking for