Two more issues about $$LAST_EXTRACT_DATE PARAMTER

Hi
1. Dose the $$LAST_EXTRACT_DATE paramter get value per every task or it has global value for every execution plain,
or dose it get his value according to his task's source tables (what happens if it has more then one table)?
2. I have made change in sde map (i have copied the map to the custom folder in the informatica designer and configer the new task at the DAC accorrding to Oracle customisation methodology).
the dac creates parameter file for the new task but it dose crates the parameters (i think because it is used inside mapplets):
mplt_BC_ORA_PurchaseScheduleLinesFact.$$INITIAL_EXTRACT_DATE=
mplt_BC_ORA_PurchaseScheduleLinesFact.$$LAST_EXTRACT_DATE=
dose anyone bump into this problem?
(what should i do to make those two parameters to populated by the last_extract_date value of the original task ?)
Thanks
Edited by: user9167105 on Feb 17, 2010 1:07 AM

LAST_EXTRACT_DATE will be different for each task. For each task there will some primary or auxilary source tables and all tables will have refresh dates. DAC will consider the date related to primary source table(minimum date if have more than one primary table) and use it as for LAST_EXTRACT_DATE. To fix the secound issue check whether there is a variable 'overrideMpltVarWithMapVar' set to 'Yes' in Administration Console -> Integration Service -> Customer Properties. If not, create that variable.
Edited by: user573617 on Feb 17, 2010 2:03 AM

Similar Messages

Firefix sad:"Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?" But,I can do the that from Opera...What should I do?

Copy/Cut/Paste is not available in Mozilla and Firefox.
Do you want more information about this issue?
That's what Firefox sad to me...I was Rich text editing,but I can
not use copy paste on.
I did the same site and Rich text editing with Opera,
and there was no problem.
I love Firefox,and I want ti use it,but if this is not posibile to do in Firefox,I must go with Opera from now on.
Pleace,responde to me,I need to fix a problem.
I hope you understanded my Engish!
Thank you...

Try to use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete
See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/

Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?

Copy/Cut/Paste is not available in Mozilla and Firefox.
Do you want more information about this issue?
Yes!

https://support.mozilla.com/en-US/kb/Clipboard+not+working
This extension will help you set the necessary permissions - Allow Clipboard Helper extension: 
https://addons.mozilla.org/en-US/firefox/addon/852

Issue about IDoc Adapter Receiver Channel's Performance

Hi Everyone,
Currently, I am working on a scenario of File -Integration Process - IDoc in XI 3.0 with patch level 16. The scenario works fine when it process one/two/three files in parallel, and the IDocs arrive R/3 system quite fast. But when I try four files in parallel, the whole XI server blocks, I can not do anything even logon Integration Builder, and the IDocs arrive R/3 brokenly, sometime with the invterval to 10 minutes. When the XI comes back, I found all the four integration processes finish successfully and each transaction works fine and fast. What's more, after I change the IDoc Adapter receiver channel to a File Adapter receiver channel, it works fine for even 20 files in parallel. So I think it is some issue about IDoc Adapter receiver channel. Does anyone have the same experience as me? Any comments will be appreciate.
Regards,
Nick

Hi Nick,
Can you check this Blog-
/people/sreekanth.babu2/blog/2005/01/05/delayed-xi-message-processing
May be useful.
How are you picking the files .. You can try with EOIO options while picking the file.
But if you use BPM, it is not applicable. It will act as a EO only.
Check this SAP Note- 833740
Thanks,
Moorthy

Two small issues switching from Leopard to Snow Leopard

Hi,
I just recently switched to Snow Leopard from Leopard. I was considering Lion, but heard some bad things about it.
Either way, I noticed two small issues. The first was a hot key set on my Logitech mouse. I had a button preset to all windows expose. In the software
for the mouse driver you can set it to expose specifically. (Its not just setting it to a certain F key). For some reason this doesn't work anymore.
The other problem is when I link my mac book pro to an external monitor thru an hdmi cable, I notice on the tv screen it reverts back to the default
desktop background. Instead of having the picture I set, it shows up on the big screen the blue and purple space image.
Any suggestions?
Thanks

Thanks for the reply,
The Logitech mouse driver said there were no updates available so I figured the expose had something to do
with the new OS system since it now said expose and spaces, which Leopard never had spaces.
So what I did was figured out how to just set it up with the F keystroke and it worked!
When I link my Mac Book Pro to my tv, I use an external keyboard which is more up to date with the quick f keys up top and the arrangement is set up differently [ such as the volume keys are now f 10 and 11 instead of f 3 and 4 or something like that] Hopefully when my mbp is linked to this the keystroke I have set for expose still works. I believe it will.
And as for the desktop bg, after unplugging my tv I notcied it still stayed on the space theme. So I believe I know what may be the issue. I set that bg off of a picture on an external hd, and never saved the image on my computer hd. So I'm assuming it saved the desktop picture in some cache thing or something and once it got linked to an external monitor it got refreshed.
I now how that image on my computer and set, so hopefully the next time I link my computer to the tv, it'll stay.
Thanks!

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

[svn] 2706: Improve the information given during parse errors by providing more context about which parent token is not expecting a particular child token to follow .

Revision: 2706 Author: [email protected] Date: 2008-08-01 10:10:58 -0700 (Fri, 01 Aug 2008) Log Message: ----------- Improve the information given during parse errors by providing more context about which parent token is not expecting a particular child token to follow. QA: Yes Doc: No Checkintests: Pass Reviewer: Paul Bugs: SDK-15791 - [MXML Namespaces] Provide better error message when language tags are added as child of Declarations tag SDK-15659 - [MXML Namespaces] Error message not descriptive when Private tag is not immediate child of mxml document SDK-15669 - [MXML Namespaces] Error message not descriptive when incorrect <Library> and <Definition> tags are defined Ticket Links: ------------ http://bugs.adobe.com/jira/browse/SDK-15791 http://bugs.adobe.com/jira/browse/SDK-15659 http://bugs.adobe.com/jira/browse/SDK-15669 Modified Paths: -------------- flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties

Thank you for the sympathy and the information about the Adobe.com forum Michael.
I posted here because, to be honest, for a company that's acknowledged their installers and updaters and support needs some work, they seem very determined to obfuscate the means by which users can provide direct feedback to the company. Much like you, I've also noticed a trend in CS5 installations that mirrors the issues that were present in CS4. it's a sad state of affairs.
As for my installation, you are also quite right to say that a clean install would have been a lot faster than what I went through with TS and it was actually my first idea. Before calling TS I'd actually read through the forums and noticed that a large number of users who were faced with my situation had no other choice but to reformat. I was just giving Adobe the benefit of the doubt and wasted 2 and a half weeks through that course of action...
What makes this situation even more frustrating is that the installer failed on a fresh system. It was a custom-built design machine, assembled and configured by myself. The only software that had been installed on it prior to Design Premium was Firefox, an FTP client and the start of my problems, trial versions of various CS4 programs. I used trials just long enough to retire the previous design computer so that I wouldn't contravene the EULA's stipulation of not running more than one instance of software at the same time on different machines. Turns out being honest once again penalised a legal customer.
If there is just thing users should learn from my far from unique tale of failed tech support it's that if you ever run into a problem with the installation, don't bother calling TS, just reformat and start from scratch. It might seem like it'll take longer to get going again, but in actuality, it's the opposite. Reformatting means you'll be up and running in about 1 or 2 days rather than 2 weeks.
Marc

Widget thinks there are two "more" pages

used a widget i found free on the Muse site - after hours of work - it works correctly - except -- after publishing - it seems to think it has two more "pages" to the widget and pauses for a long "blank" page at the end of the
slide show - cannot figure out whre it is getting this information - but it looks very unprofessional having a long blank wait before it starts again
please help
here is the link:
http://http-shipleybusinesscatalystcom.businesscatalyst.com/index.html

An instance registers itself by sending a message to the listener.
The machine and port used to send the message are defined as an initialization parameter, LOCAL_LISTENER.
The listener listns on the TCP/IP network for messages, such as registration, coming in on the port designated in the listener.ora file.
If there is a machine name mismatch (DHCP), a port mismatch (administrator), a network mismatch (sys admin) or a firewall blocking the port by default (OS vendor) and not opened (sys admin), then there may be an issue with self-registration.

More Details about Multithreading Mode in User Management

Good morning,
we are working with Portal 7.0 on SP 14 and there is an option to activate the multithreading mode
in the User Management part of the support desk. Since this option seems to significant speed up our
login time i´am interested in more details about what is happening here. But i was unable to locate
any documentation / forum entries / blogs about it. Another point is the question if it is possible
to persist that option. After every Node / Serverrestart multithreading gets deactivated again.
Any Ideas / Links / Helps would be appreciated and points will be rewarded.
Thank you,
Marco

Hi
Here is a useful HDD password summary:
http://aps2.toshiba-tro.de/kb0/TSB6B01MC000CR01.htm
_HDD User Password and HDD Master Password:_
There are two levels of the HDD Password, the HDD User Password and the HDD master Password. If both levels of HDD Password have been registered, you can access the HDD by entering either of them. TOSHIBA Password Utility (TPU) only supports the HDD User Password. If you want to register both, open BIOS SETUP. If the HDD User Password has been registered, the HDD Master Password can not be registered
Hope this helps a little bit

This is a two part question about the creative 16gb Zen?

8This is a two part question about the creative 6gb Zen? First of all, my battery life dropped very suddenly. One charge I was getting the full 30 hour battery life and the next it dropped to under ten. I tried using their tips on how to extend the battery life and I am still getting less than 0 hours of battery life. Why would it dropped more than half the amount between charges? I tried recharging it after it ran out and still the same thing. Any help?
Second, (I am adding this question because it might relate to the first in some way) my mp3 player has been behaving strangely lately. For example, some artists sometimes have letters removed or all but the first end up being removed. But, if you reset the player, the artists go back to the full name. Also, my player has been taking a little longer than usual to turn on. It takes about 30 seconds to turn on instead of the 5-0 that I'm used to. Does anyone know why this might be happening?
My Zen is only 4 months old, and I would be very upset it it's breaking already. Please, if you have any suggestions on how I can fix what's happening, post them. (Even if they?probably won't work, they're worth a try.)

< This is an unusual one; never heard of it before. All I can suggest is cleaning up and perhaps reflashing the firmware. If it still is doing this, then get the thing exchanged pronto.
My guess is that the problems are indeed closely related.

Two weird questions about BP maintenance......SOS!!!

Two weird questions about BP maintenance......SOS!!!
The procedure is like this:
These informtion will be import to SAP:
BP information
Address Information of this bp.
Communication information of this BP
1. check if the bp exist, if yes, update the BP.Then go to 3.if no go to 2
2. Create a bp with the Address information and communication information
3. Check if the Address information has been existed,if yes go to 4.else go to 5
4.Update the address information with the communication information.
5.Create a new address for this BP.
And the problem I got is like this:
1. After I changed the BP information, such as the surname,lastname etc.Use this BAPI
"BAPI_BUPA_CENTRAL_CHANGE",I commited it.Then I call the BAPI "BAPI_BUPA_ADDRESS_CHANGE" to change the Address of this BP,however
When I call the BAPI_BUPA_ADDRESS_CHANGE,it always told me the BP is locked by myself.............
I am sure I do not open the BP in the other window.And I commit it after I call the BP Change BAPI.
2. When I change the communication information ,it always told me BAPIADTEL you want to update does not exist in this system.....I am sure it does.
Who can help me??
Thanks very much

Hi,
1) Problem with the lock. To commit the changes after the BAPI_BUPA_CENTRAL_CHANGE API, instead of using commit work to commit, Use BAPI_TRANSACTION_COMMIT. This should solve the problem. This wil help in clearng the buffers of BP.
2) in the BUPA_ADDRESS_CHANGE, for telephone there are two parameters to be filled IT_ADTEL, IT_ADTEL_X
IT_ADTEL : Should be filled with the telephone details etc (Consnumber should not be filled for inserts. This should be filled only for updates).
Corresponding IT_ADTEL_X structure has to be filled with update flag as 'I', 'U' or 'D' based on the task.
Hope this helps. Let me know if some more info is needed.
Regards,
Sudheer.

Synchronization issues about FMS server side language!

My FMS applicaiton(FMS4.5) use a Array on the main.asc ,
anyone who connect to the server will change(remove/add) item of the Array,
i'm worry about that if there is a synchronization issues with that?
Is there any class i can use to lock/unlock the Array when i modify the Array?
THX!

You can have synchronization issues. For using lock/unlock, you can use server side Shared Objects. For more details about Shared Object, check the below link:
http://help.adobe.com/en_US/adobemediaserver/ssaslr/WS5b3ccc516d4fbf351e63e3d11a11afc95e-7 e63SSASLR.2.3.html

Issues about seniority

Dear experts!
Now I'm getting some issues about seniority.
- The first, I want to get number of months that employee work since employee started working in the company.
- Second, I want to move the value to wage type.
How do I do?
Help me, please.
Regards Huy!

first one
Check if there is any FM is there
or else u can check with the Stadrad report of employee Entry and Leveig report
second one
wht value u want to move the wage type can u be some more clear

3 issues about material determination

Hello Gurus,
there are 3 issues about material determination , I don't know how and wher to configure them .
(1) I want to choose whether or not you want to re-run material determination when the delivery is
created.
(2) I want use the some attributes in the material and customer master records to exclude a
particular material from product selection. This means, for example, that all the materials that have
been rejected in the customer master will not be included by the system when it determines a
substitution material.
(3) I want to deal with shortfall cases (in which only the available quantity is confirmed, and it is less than the order quantity) by passing the shortfall quantity on to materials planning. In this case, an additional sub-item is generated with a specifically defined material.
thanks very much!

(1) I want to choose whether or not you want to re-run material determination when the delivery is
created.
hi no need to re run the material determination
(2) I want use the some attributes in the material and customer master records to exclude a
particular material from product selection. This means, for example, that all the materials that have
been rejected in the customer master will not be included by the system when it determines a
substitution material.
hi in this case i thing this is related to listing and exclusin (for more info in search of sdn type listing and exclusion)
(3) I want to deal with shortfall cases (in which only the available quantity is confirmed, and it is less than the order quantity) by passing the shortfall quantity on to materials planning. In this case, an additional sub-item is generated with a specifically defined material.
this is possible by activating availability check and TOR transfer of requirement (for more info in search of sdn type availability check and TOR )

Two more issues about $$LAST_EXTRACT_DATE PARAMTER

Similar Messages

Maybe you are looking for