Two movement type in sales order

Hi
my client requires a stock to transfer to plant (301 mvt type) to happen at the same time while creating the sales order.
for this i added one more movement type in schedule lines (mvt type 1 step) in img.
but i am not getting the two schedule in the sales order (if i am correct).
Please if anybody have an idea on this where i missed any configuration for this issue.
Thanks in advance.
Thanks and Regards
S P

Schedule line in sale order will flow based on the settings you maintain in VOV5.
So go to VOV5, select your item category and check whether you have maintained there.
Also if I understood your question correctly, you want two schedule lines in sale order with same item category.
For information, when you create sale order for a material and stock is not available for the requested delivery date, then in such case only, you will get multiple schedule lines.
Moreover, One schedule line category can have only one movement type and this being the case, unless you differentiate the schedule line category and assign it in VOV5, your requirement cannot be met.
thanks
G. Lakshmipathi

Similar Messages

MRP type for two different types requirments( Sale order and PIRs)

Dear All,
We have requirment some materials we have sales order and PIRs. For sales order we want to consider with "MRP type" as PD and PIR we want to consider "MRP type" as VB manual reorder point planning.
Is there any stadard solution.
If standard solution not possible also poivde some inputs on enhancement.
Regards
Sailendra
Edited by: nivedita yadav on May 7, 2010 2:31 PM

Sailendra,
your post is confusing, how you want to different MRP type for same material?
and why its needed?
1) you can use MRP type PD , and incoming sales order will search in existing stock or will create procurement proposal ( depends upon what strategy you are using)
2) If you are using VB then when ever you stock will fall below the reorder point you maintained in material master , system will create new procurement proposal, here the manual means the value you need to maintained manualy for reorder point and safety stock.
In automatic reorder point planning, both the reorder level and the safety stock level are determined by the integrated forecasting program.
The system uses past consumption data (historical data) to forecast future requirements. The system then uses these forecast values to calculate the reorder level and the safety stock level, taking the service level, which is specified by the MRP controller, and the material's replenishment lead time into account, and transfers them to the material master.
hope it will help you.
Regards
Ritesh

Stock movement in the sale order

Hi Gurus,
Can any one explain me how to configure the stock movement in the sale order. Our client has MTO and MTS types of production process. For MTO, once production process completed stock will come to the sale order. In case of MTS, when sale order created system is considering the stock lying in the unrestricted use. Instead of this we would like to have the validation such that first user should move the stock from unrestricted to sale order. ( here system should not consider materials lying in the unrestricted use).
Kindly let us know the processing steps for MTS scenario.
Regards,
Madhu

Hi,
Please goto the links given below
Re: Different Method to valuate sales order stock
Re: Reserving the sales order stock
http://www.sapfans.com/forums/viewtopic.php?f=9&t=40409&start=0&st=0&sk=t&sd=a
I hope this will resolve your issue
Thanks
Anil Hooda

How to Avoid Duplicate Pricing Condition Types In Sales Order and Billing

Hi SAP Gurus
I have a requirement in Pricing (Sales and Distribution). We have issue duplicated condition types in Sales order and it causes wrong posting in to accounts.
I want make them inactive duplicated Condition type in Sales order and Billing Documents.
Please advice me how to make inactive status to duplicated Condition types
Thanks in Advance.
Ravikanth

Hi
You can use Exclusion Group
You can define 2 Groups and include 1 condition type in each
and define exlusion procedure
A   Best condition between condition types
B   Best condition within the condition type
C   Best condition between the two exclusion groups
D   Exclusive
E   Least favorable within the condition type
F   Least favorable betweent the two exclusion groups
you can use Exclusive to set your condition type or as per your requirement
Regards
Jitesh

Two Delivery dates in Sale Order against one item

Dear All
I need two delivery dates in sale order. one is default at the time of creation sale order. second i need actual delivery date which will be confirmed by production planning department after analysis the order whether material can be ready on that delivery date or it need to change. Actual delivery date may vary from original delivery date and both need to preserve in system. kindly provide solution. best regards.
Manjit

You need to select the Availability & Transfer of Req. check box in Schedule Line Configuration.It will transfer the req. to PP.So while creating the sale order , schedule Lines will be confirmed as per the Available Stock.
System will give you the Default Delivery Date as the Date added after Lead Time in days in the Configuration.Else system will give the Current Date.
Best regards,
Ankur

Forgot to put ZPNT (Penalty condition type) in sales order

Dear Expert,
We have created sales order and billing document has been sent to customer,after that we came to know tht we forgot to put ZPNT Condition type in sales order. Now i want to create another sales document with reference to billing document, in which only ZPNT Condition type will be appear (not other condition) and thn will create billing document with reference to new sales order so that ZPNT amount goes to the right ledger A/C......Is it the right process to solve this problem if yes thn please advise me how to fonfigure the system.
Regards
Parul Deshwal

hi Parul,
rather than doing this which is quite complecated process
saying complecated because, when u do Copy from billing to sales document all condition will appear and might be there r some mandatory conditions in pricing procedure which you can not remove.
Above all, IF your condition ZPNT value is based on some other conditions then also it will not be possible for you to calculate it correctly.
there is one more possible way by creating DEBIT NOTE with reference to sales order but again you might have to face above mentioned problems
So better you follow standard and easy method
1. Reverse the billing document if PAYMENT is not posted
2. Reverse the Delivery (if any)
3. add your condition type to sales order for line item and create it
Regards

Requirement type in sales order

hi sap gurus,
i want to know how requirement type is configured and how it conmtroll the scenario in MAKE TO ORDER scenario. previously i have seen that with requirement type in sales order Procurement tab, system determine the planning statergy and it determine the special stock type of material, e.g. E for sales order stock and Q is for project stock. but i want to know whether this is correct or not and how this is happenning i.e. what is the configuration and assignment.
please help at earliest.
biplab rout

Hi,
Check this thread
Re: Requirement type
Re: requirement type and requirement class
Thanks,
Raja

Material Return from 542 movement type without purchase order

HI Expert
I have a problem regaring material return from vendor through 542 mov type against purchase order.
when i transfer material to vendor with mov type 541. and after grv if we return material from vendor against purchase order.
system doesnot allow to return material against purchase order. it allows mov type 542 for returning material from venodr without pruchase order.
Suppose we have 10 quality for a component to transfer vendor we take grv and issue 5 qty through 543 move type automatically. if we want to take return 5 remaining qty from vendor against purchase order .
system doesnot allow to return component from vendor against purchase order.
but allow to return component from vendor without purchase order.
vendor stocks becomes less but purchase order still open for open quantity.
how we could control vendor's returing material with the reference of purchase order after grv.
with regards
sanjay agrawal

HI,
Are you creating return Po for subcontracting vendor with item category L.?
we used movement type 541 to send material to vendor ,now you want movement type 542 in system means take back from vendor?
I don't think so it will make work and make any sense
why you are not adjust your component with subcontracting adjustment in sap mm
check following link
[http://help.sap.com/saphelp_470/helpdata/en/4d/2b908943ad11d189410000e829fbbd/content.htm]
Regards
Kailas Ugale

Purchase order type in sales order header

Dear Friends,
how can I make purchase order type in sales order header be default.
With regards

Hi Vamsi,
if you want to enter a default value in the purchase order type field in sales order header, then do it by either of the ways
1. by variant tcode SHD0
2. by USEREXIT_MOVE_FIELD_TO_VBKD in program MV45AFZZ
regards,
Santosh

How can prevent duplication of condition types in sales order??

How can prevent duplication of condition types in sales order.
While we want Amount field Changeable by user.
Please give me solution.

Dear Rohit,
Can you explain your scenario in detail with an example or any screen shot so that we will help you in easy way ...
Regards,
C.B Reddy

About hide special condition type in sales order condition screen

Hi all,
    I have such requirement:
    Customer want to hide some condition type in sales order condition screen.
    I have tried the authrization object :V_KOND_VEA but it only controll the master data level
    and the special still show on the condition table.
    I have also find any user exit in SD module:
    USEREXIT_FIELD_MODIFICATION (module pool SAPMV61A, program MV61AFZA)
    But it looks like a system modification, and need the modification key.
    So, is there any solution such as enhancement or configuration to meet this requirement?
Many , thanks.

Check this thread where similar requirement was discussed
[Condition Type |Condition Type]
thanks
G. Lakshmipathi

Add an output type in sales order header

Hi Dear Experts,
I try to find a way to add an output type in sales order header after the order was created.
I also need the output to be sent immediately to the FAX.
Do you know any BAPI or Function that can help me or have any idea how it can be done?
Thanks and best regards,
Sagit.

Hi,
You can use the FM ..RV_MESSAGE_UPDATE..
Thanks
Naren

Manual Condition type in Sales Order

Hi,
i need to enter a manual condition type in sales order which should come in % and the value should not come or it should come as zero, Is there any way to make that manual condition value as Zero in sales order.
Ragu

Raghu,
Pls check the OSS notes 392668, that will solve your problem.
The same pasted here for your reference. However, I advise you to download it and then read due to inconsistent formatting here.
Reward if this helps.
When you create documents in which the standard pricing is used to determine condition records as well as to calculate a pricing result, the display and entry of manual entries is not clear in the relevant condition screen (screen 6201 in the SAPLV69A or SAPMV61A programs for releases prior to 4.6A).
This note explains the interaction of manual entries with the attributes maintained in the pricing procedure and in Customizing of the condition type.
Other terms
KAUTO, V/06, V/08, KAEND fields, KOZGF, PRICING_CHECK, LV61AU08, XKOMV_ERGAENZEN_MANUELLE, LV61AA53, manual entries, MANU
Reason and Prerequisites
In the pricing Customizing, the following fields affect the manual entry of complete condition lines or individual condition rates:
Description        Technical name              Maintenance transaction in SD
Access sequence    KOZGF                  V/06 and V/07
'Manu'            KAUTO                  V/08
Depending on the characteristic of the mentioned fields, the pricing condition screen appears as follows:
KAUTO   | KOZGF    | Condition record existing on DB? | Result
Initial | Initial   | -                                | (1)
Initial | Existing | No                              | (2)
Initial | Existing | Yes                              | (3)
Set     | Initial   | -                                | (2)
Set     | Existing | No                              | (2)
Set     | Existing | Yes                              | (4)
Result (1)
A condition line is set for the relevant condition type [KSCHL]. The 'Condition rate' field [KBETR] does not contain a value, but is ready for input. The displayed line serves as an input help or a template for the manual entry.
Result (2)
No relevant condition line is set on the pricing condition screen, in other words, the condition type is missing.
If you enter the condition type manually without entering a condition rate in the same processing step, you get a 'template line' as described in (1).
Result (3)
A suitable condition record that exists on the database is set with amount (= normal, automatic determination).
Both the 'Condition origin' indicator [KHERK] and the 'Condition control' indicator [KSTEU] are set to 'A'.
If you create another line with this condition type and enter a condition rate not equal to zero, a line is set with this condition rate.
The 'Condition origin' indicator [KHERK] as well as the 'Condition control' indicator [KSTEU] has characteristic 'C'.
If, on the other hand, you create another line and enter a condition rate of zero (or do not enter any condition rate) and the condition record that exists on the database has a scale, the system sets the condition rate according to the achieved scale level. If zero is to be set as the condition rate even if scales exist, then use modification Note 179354. If no scale is maintained, then the system always sets zero as the condition rate.
In these cases, the 'Condition origin' indicator [KHERK] has characteristic 'C', the 'Condition control' indicator [KSTEU] characteristic 'A'.
Result (4)
No relevant condition line is set on the condition screen, even though a condition record suitable for the access sequence exists on the database. The pricing analysis displays the message "Manual condition (Condition record exists)". If you enter the condition type manually without entering a condition rate in the same processing step, the record that exists on the database is set. If a condition record has a scale, the system sets the condition rate of the first scale level independently of the achieved scale level.
In this case, the 'Condition origin' indicator [KHERK] has characteristic 'C', the 'Condition control' indicator [KSTEU] has characteristic 'A'.
Thus, the setting variant leading to result (4) serves to suppress the setting of automatically found condition records into a pricing result. However, you can add the maintained record to the already determined pricing result by entering the relevant condition key.

Exchange Rate type in sales order

Hi,
can we see exchange rate type in sales order.
regards
sachin

Dear sachin
Yes in VA02, select Goto - Header - Sales. Here at the bottom of screen, you will see a tab "Pricing and Statistics" under which, there is a field "Doc.currency".
Thanks
G. Lakshmipathi

Two billing for one sales order for same customer

Dear All ,
I have a requirement of posting a two billings for one sales order.
One is for Sales and another is for commission...
Entry could be
Sales Entry - Db Customer
Cr Sales
Commission entry could be
Db - Cusomter
Cr- Sales commission income account (P/L)
We are having third party sales scenario , In this case billing is MIRO dependent.
Once the miro is done then only billing is possible ...
Could you please advise on that ..
Regards,
Sukh

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

Two movement type in sales order

Similar Messages

Maybe you are looking for