Two N8 behaviors
Well I've owned by N8 for a whole two days now, and it's certainly nice (I'm learning to use the capacitive touchscreen very slowly ... I miss the resistive one). There are a couple of things that my old N97 did very well that the N8 seems to do less well, and I'm hoping that maybe I'm just missing something:
1) I was using the email.nokia.com push service for my personal mail, and that worked very well. It doesn't seem to be available for the N8; I'm using the built-in mail client which is very nice and it seems to stay up to date with my e-mail, usually - but every once in a while it will just stop updating that mail, and if I open the mailbox the little status thing will revolve forever but not update the mailbox. If I turn the phone off and then back on, it will reconnect and get all of my mail. This doesn't affect Mail for Exchange, just my IMAP mailbox.
2) My car has built-in bluetooth for connecting to a cell phone. With the N97, the car would show me how many bars of signal I had, and I was able to access the phone's contact list from the car. With the N8, the signal bar display on the car is different than what the phone reports on its screen; usually the car just shows no bars even if the phone has good signal. Also - I no longer have access to the contact list on the phone.
Neither of these are major things; just small annoyances. But it would be awesome if I could get back those few features that made the N97 indispensible to me!
Kman00
Cannot confirm what you say.
I use the native mailbox in my N8 it loads almost in real time my mails
(gmail, ovi and a German provider).
Also it is HTML, the old one in N97 was not.
And, if I delete something it is directly deleted in my gmail.
So, I wonder what may be wrong and/or different in your mail settings.
Only thing that bothers me is is the 2MB limit for attachments.
If you want to get rid of that limit you have to reject the Business conditions and go back to the simple (like N97) mail client.
This means, you actually have two mail clients on your N8.
The new one - like nokia messaging- and the old one as it was on the N97.
Regards from China
RR
Similar Messages
-
One text link, Two window behaviors
Using DWCS2:
I have one text link that I'd like to link to a new html page
(_self), while also opening a new browser window with a different
html page (_blank). I've spent some time trying different
scenarios, without any luck.
Any help would be much appreciated. Thanks in
advance!-)A hyperlink on a <span> tag gives me indigestion.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Michael Fesser" <[email protected]> wrote in message
news:[email protected]..
> .oO(MikeL7)
>
>>Here is a link that will open two pages, change the
name of the page to
>>the
>>pages you need.
>>
>> <span onclick="javascript:document.location.href
= 'self.php'"><a
>>href="blank.php" target="_blank">Two
Links</a></span>
>
> You can drop the "javascript:" pseudo-protocol-thingy.
And I also think
> you can do it all in one element:
>
> <a href="blank.php" target="_blank"
> onclick="window.location.href = 'self.php'"
> >Two Links</a>
>
> But I'm still wondering what this is for (doesn't look
right) and what
> happens if JS is not available ...
>
> Micha -
Promoted Links Launch Behavior: Dialog
When using the Promoted Links app, and using the Dialog launch behavior, every link I have tried returns an error.
This does not happen with the other two launch behaviors, 'In page navigation and New tab'.
I have tried opening several links that I know are good, including SharePoint pages. All work in every launch behavior except, 'Dialog'.
Any idea why this is happening?Hi,
Based on your description, I have done a test and I can ’t reproduce your issue.
I created a Promoted Links list, when I added items, every launch behavior worked fine.
Let’s verify the following:
Whether the issue exists in the other sites of the same site collections.
Whether the issue exists in the other sites of the different site collections.
Whether the issue exists in the other sites of the different web applications.
Done a test , compare the results.
Change a user with full control and done a test, compare the results.
Besides, check the SharePoint ULS log located at : C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS to get a detailed error description.
Take a look at the similar post：
https://social.technet.microsoft.com/Forums/en-US/ab3482a5-960b-48aa-b209-a934005d5d9a/promoted-links-app-behaviourdialog-question?forum=sharepointdevelopment
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
I've noticed two odd behaviors with iPhoto 6. Quite often now the application asks to rebuild my thumbnail library even though nothing has been added or changed. I also, just today, noticed that when I have a picture enlarged on screen and go to print it, the print option is grayed out. If I switch out of iPhoto to the desktop or another application and go back, then the Print option is selectable.
I've noticed two odd behaviors with iPhoto 6. Quite
often now the application asks to rebuild my
thumbnail library even though nothing has been added
or changed. I also, just today, noticed that when I
have a picture enlarged on screen and go to print it,
the print option is grayed out. If I switch out of
iPhoto to the desktop or another application and go
back, then the Print option is selectable.
I'll second that.
Often, but not always, when I go into iPhoto after a restart, it wants to rebuild my thumbnail db, which takes a LONG time (4000+ pictures).
Haven't tried to print, so can't confirm that one.
I'll add another to your list though:
I can't rename film rolls at all.
I looked up the help, and the help simply doesn't match the options available - any way to change it? -
Velocity profiling with SoftMotion Module
Hi Folk,
I need to move a stepper motor following a velocity profile, i.e. I need to change continuously the velocity while motion is in progress.
I intend to perform the move with a cRIO platform equipped with a NI 9512 module.
By using the property & invoke nodes, introduced first in NI SoftMotion Module 2009 SP1, I have created a small test routine to perform my task.
I have used the property & invoke nodes, instead of the function blocks, because I want to update the velocity profile as fast as possible.
For the test routine I have used a simulated axis (a servo motor) and the routine is developed by using the scan interface.
In the main loop, a sinusoidal wave (point by point) generates a sample velocity profile, the velocity is passed to the "velocity" Straigth-Line Move property node and it is applied to the axis by the "Start" Straigth-Line Move invoke node.
The test routine runs circa correctly until the velocity profile cross the zero, at that time the routine stops with the following Error -77070.
I have added an offset to the generated sinusoidal profile. The test routine runs correctly if the offset sets the sinusoidal profile all positive or all negative, i.e. the offset is greater than sinusoidal amplitude.
Question (1)
I beleave that this behavior is due to a bug in the Straigth-Line Move node. I am right?
Question (2)
I have written that the routine runs "circa" correctly because furthermore the previous bug there is a timing issue.
I have set the Scan Period = 5 ms as it is requested for 951x modules.
If the timed loop (Synchronize to Scan Engine) is set to 5 scans or more the timing of the timed loop seems to be correct (the sinusoidal wave shows the period that has been configured).
If the timed loop is set to 4 scans or less the timing of the timed loop becomes longer (the sinusoidal wave shows a longer period as that has been configured).
Any idea about this timing issue?
Question (3)
Any suggestion how to write a faster velocity profiling with the SoftMotion Module?
Thanks for your help,
Asper
P.S.
Error -77070 occurred at Invoke Node in Axis_Velocity_profiling.vi
Possible reason(s):
NI SoftMotion: A Start operation is pending. Please add a delay between consecutive preemptive Start Motion calls.
Attachments:
velocity_profile_exemple.zip 77 KBHi Reid,
I am developing a system for low-force tests of very thin tissues in tension and fatigue.
The force is measured with a load cell and is applied by pulling the sample with a linear translation stage and the elongation is measured with a linear encoder.
The linear stage is motorized with a 2-phase-stepper motor, and with two limit switches. The stepper is designed for applications with very limited space conditions and the motor is hollow.
The linear encoder has a 20 nm resolution and a 1 um accuracy, and includes an electronic for signal conditioning that is compliant with the encoder input of the NI 9512 module.
The load cell is a full bridge with an accuracy better than 0.01 %. For acquiring and conditioning the full bridge, the system uses a NI 9237.
The system will provide tests that are controlled both in force and in elongation.
For the tests controlled in force, the loop is closed with the signal measured by the load cell and the translation stage is driven in velocity.
For the tests controlled in elongation, the loop is closed with the encoder signal and the translation stage is driven in position.
For both type of tests, the user can select different test profiles, for example: a linear increasing, a sinusoidal profile for fatigue test, etc.
The user can pause the test at any time, and the system must take the condition, until the next proceed command.
My previous post: question (1)
Your reply:
I ran the code Axis Override Test 1 on my machine on a simulated Axis and this was the performance I observed:
Our versions maybe differing did you see the same behavior on a simulated axis?
Concerning the velocity that is read from the Read (Data) function block, I observe the following:
With a simulated axis (both in My computer and in cRIO-9073) the values are positive for forward move and they are negative for backward move (as you also have observed).
With the real axis (NI 9512) the values are positive both for forward move and backward move.
Please see the next images.
With simulated axis
With real axis (NI 9512)
My system is as follows:
LabVIEW: 9.0f3
SoftMotion: 9.0.1
NI-Motion: 8.1.0.3037
NI-RIO: 3.3.1
NI-RT: 9.0.0
I want to point out that the simulated-axis is a servo drive while the real axis is a stepper drive (NI 9512).
With my software release, I believe that this behavior is due to a bug, probably in the stepper drive interface. I am right?
I suggest that you try on a real stepper axis (NI 9512).
My previous post: question (2)
Your reply:
These two questions I feel share the same root cause. It takes a little bit longer to calculate the a preemptive move in the opposite direction.
Considering the observation on the Read (Data) function block issue, now I note that my second question arises from the sum of two different behaviors. In case the Read (Data) function block issue is solved, as for simulated axis, the sentence can be rewritten as:
The velocity plot shows some computation troubles as the velocity is approaching the zero, with the derivative both positive and negative.
Furthermore I have discovered that this computation troubles gives a blocking error if the velocity is approaching the zero with a zero derivative.
Once the velocity reaches the zero with a zero derivative, the "Velocity Override" Write is no any more able to change the velocity!
No errors or warnings comes out in this situation!
This behavior is true with an axis both real and simulated, and is still true both with an all function blocks code and a mixed function blocks/invoke nodes code.
From this point of view, the velocity troubles with the approaching to zero are very very bad!
Please consider that in the previous posted example you can find an all function blocks code, Axis Velocity Override_test_0.vi, and a mixed function blocks/invoke nodes code, Axis Velocity Override_test_1.vi.
You can easily test the velocity blocking error by putting the parameter offset = amplitude in the previous posted example.
My previous post: question (3)
Your reply:
I am curious if you are observing that around zero % the override function performs poorly, was this present on the function block example? I think the problem here is the preemptive move being called from the straightline move function. Basically, the trajectory generator is still calculating points when send the command to it. Since we are updating the velocity at a very fast interval we notice some of this breakup due to the longer latancy times. Even with this
Error -70216 occurred at an unidentified location
Possible reason(s):
Motion: A required resource is busy and unable to accept further commands at this time.
To get around this error you will need to call into the trajectory generator at a slower period of time to allow it to finish the operation in progress. Keep in mind the control loop we are calling into in RT is the command loop to the trajectory generator and the position control loop is performed on the FPGA of the module itself.
I want to underline that the computation troubles as the velocity is approaching the zero has not apparent connection with the Error -70216.
I have tested the posted routines with Scan Period = 5 ms and the Number of Scans = 5 or more (25 ms for cycle or more) and the computation trouble is still there every time that the velocity is approaching the zero.
The Error -70216 come out randomly and increases as the cycle time decreases.
I did not observe any decay in the time to perform the Velocity Override around zero %, but you have to consider that I did not make any test to investigate this issue.
I agree with you, the Error -70216 can arise from some commands that try to access the same resource a the same time.
In my opinion the Velocity Override has to be predominant, i.e. no matter what the routine is actually doing, the routine should start immediately to correct the actual velocity to reach the new value.
Suggestion: for the future release of the Velocity Override, please consider to leave the opportunity to select from percentage velocity (as it is now) an absolute velocity.
Regards,
Asper -
Dear community,
in Safari (OS X Yosemite) I found a 'feature' that's not logical from my perspective: When I want to save a file (e.g. a PDF), I right-click the link and klick 'Save file under...'. Then a window opens where I can specify the path where I want to store the file. Because I want to save the file in a new folder, I right-click in the file/folder list and choose 'new folder'. The new folder is created now but I can't change it's name. I think this is not correct.
But when I click on 'new folder' on the left bottom of that windows I can specify a name for that newly created folder. I don't think that these two different behaviors are programmed with intent but by mistake. Am I wrong?
Thanks for your ideas.
ThiloYou are absolutely right
-
Why can't I download Windows Support Software
For just over 60 hours I have been attempting, unsuccessfully, to download Windows support software for Boot Camp. I have mad 71 attempts, at all hours of day and night and have received the following message each and every time:
"Can't install Windows Support Software because it is not currently available from the Software Update server."
I have installed Windows 7 in a Boot Camp Partition, but am unable to use my Apple wireless keyboard and mouse. In fact I cannot even use a USB keyboard and mouse.
In Windows I am only able to use a USB keyboard and mouse by hitting F8 as Windows 7 boots and going into safe mode. I would have thought I should be able to go into Windows normally and have USB keyboard and Mouse functionality.
From within Windows I have attempted to run the menu selection "Apple Software Update" - but installation is not possible in Safe Mode.
Here's are two other behaviors that puzzles me:
1. When I boot Windows into Safe Mode I can use the wireless keyboard to select which safe mode option.
2. I can use the USB keyboard to log in to a normal boot up of Windows, but after that there is no response to either keyboard.
Any help on how to download the needed drivers will be appreciated.
Thanks!!Your using 10.7.2 on what model/year computer?
As far as not being able to download the files you'll have to do a search in the forums as there are a few that have had your problem, mostly form last fall, but different issues for different models.
Can you use the internet from the Apple Store, Library, friend, neighbor, etc, to try downloading them. You might have to give Apple a shout as this is just a user to user forum.
Can't use wireless mouse/keyboards as Windows doesn't have dirvers for wireless items, at least not Apple compatible. Only WIRED mice/keyboards are supported. As far as using them in Safe Mode, that is curious.
Maybe boot from the Mac's "Repair Partition" and Repair Disk and Repair Permissions in Disk Utility.
Well that's as far as my knowledge goes so good luck.... -
Pre7 after upgrade from Vista to Windows 7 (Ultimate 64bit)
I recently upgraded my Vista Ultimate (64bit) computer to Windows 7 Ultimate (64bit). This was an upgrade, not a clean, fresh install. Today is the first time I have tried to run PRE7 under Windows 7. Prior to the upgrade, I had no problems to speak of with PRE7 and the PhotoShop.com Plus account that I set up with it. Now whenever I start PRE7 under Windows 7, I get the "Install Full Content" dialog informing me that a reduced set of content has been installed and that I need to install the full set of content from the installation DVD. Now believe me when I say that the full set of content was installed under Vista and that I never got such a dialog box prior to Windows 7. In addition, after clicking OK to continue, the PhotoShop.com membership did not log on automatically as I am used to it doing. I don't remember exactly now what I had to do, but to the best of my recollection, after I logged on to my account it was telling me that I needed to verify my account, which I did. I subsequently received an email with a verification link in it. After clicking on the link my account was verified and now when I start PRE7, it automatically logs me on to my PhotoShop.com account, as I am used to it doing. I still get the "Install Full Content" dialog, though. I thought I would ask in this forum if anyone else has experienced these two anomalous behaviors after ungrading to Windows 7, before I attempt to go thorough the motions of actually reinstalling the full content, which should not actually be necessary.
Thank you,
Charles LawrenceWhy it's happening is a mystery. My guess would be that the upgrade in the OS is part of the problem, but that is just a guess. Some have reported that Win7 does the upgrade thing better than any previous OS, but others report all sorts of odd problems, when doing it this way.
If you have the DVD, then I'd try a Repair Install, to see if it picks up the Functional Content.
Otherwise, I am at a loss as to why, when you upgraded your OS, PrE 7 lost the link to that material.
Good luck,
Hunt -
Screen Sharing / vnc with OS X 10.5.6 fails
I can not get the Screen Sharing that comes with OS X 10.5.6 to work with any vnc client. The server is my laptop, an MBP 2.4 GHz Intel running OS X 10.5.6.
*I enable Screen Sharing by doing the following:*
1) +System Preferences > Sharing > Screen Sharing+ is checked
2) +System Preferences > Sharing > Screen Sharing > Computer Settings > Anyone may request permission to control screen+ is checked
3) +System Preferences > Sharing > Screen Sharing > Computer Settings > VNC viewers may control screen with password+ is checked and I've entered a password
4) I also have Remote Login enabled for SSH access, but no other services are enabled.
*I see two different behaviors depending on one of two clients that I try using:*
1) +Chicken of the VNC v2.0b4+ running on same machine- Always says "Connection Terminated / Authentication Failed" without ever asking for a password. Logs the following in system.log (dates, hostnames and pids removed):
Chicken of the VNC: Server reports Version RFB 003.889
Chicken of the VNC: Bogus RFB Protocol Version Number from AppleRemoteDesktop, switching to protocol 003.007
I believe that the information in system.log is OK, and is just warning me that Chicken of the VNC is working around Apple's strange protocol version.
2) +TightVNC 1.3.9 on Windows XP sp2+- Says "Security type requested", then asks for a password. I enter it, click OK and tightvnc simply waits endlessly.
*Other Notes:*
1) I have tried configuring and starting the server using kickstart from the command line as suggested at http://support.apple.com/kb/HT2370 (+sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -restart -agent -privs -all+)
2) I have tried unchecking +VNC viewers may control screen with password+, but in this case Chicken of the VNC says "Please configure Apple Remote Desktop to allow VNC Viewers to control the screen. Unknown authType 30,31,32" and TightVNC says "Server did not offer supported security type!"
3) If I disable the Screen Sharing feature that comes out of the box with OS X, I CAN install and successfully run the OSXVnc server available at http://sourceforge.net/projects/osxvnc/. In this case, both Chicken of the VNC and TightVNC are able to connect.
*So Apple's Screen Sharing does not work. Does anyone know what the problem is? Are there any log files I can look at, or is there another way I can debug this? I'm not impressed. :)*Thanks for the suggestion. It was possible that one of these files had become corrupted, so I tried moving each of these files to another directory but unfortunately I'm still seeing the same behavior.
Here's what happens with each of these files individually after they're moved:
1) When I set the VNC password in the system prefs, com.apple.VNCSettings.txt gets re-created (with the same contents as the original unless I change the password, so that just looks like a hash of the password).
2) com.apple.RemoteManagement.plist also gets recreated when I change the system prefs. If I use "sudo plutil -convert xml1 com.apple.RemoteManagement.plist" I get the following:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ARD_AllLocalUsers</key>
<true/>
<key>ARD_AllLocalUsersPrivs</key>
<integer>2</integer>
<key>ScreenSharingReqPermEnabled</key>
<true/>
<key>VNCLegacyConnectionsEnabled</key>
<true/>
</dict>
</plist>
3) For me, com.apple.RemoteDesktop.plist does not exist.
4) Interestingly, com.apple.ARDAgent.plist does not get created until I run "sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -restart -agent -privs -all". Its XML contents are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>AdminConnectInfoList</key>
<dict/>
<key>AgentLogLevel</key>
<integer>3</integer>
<key>ServerConnectInfoList</key>
<dict/>
<key>Version</key>
<real>3</real>
</dict>
</plist>
Looking at this, I tried setting ScreenSharingReqPermEnabled to false, but that didn't help. Then I increased AgentLogLevel to 100 and got a lot of output in system.log (12:28:45 is when I restart the server and 12:29:34 is when I try to connect):
Feb 24 12:28:45 ARDAgent [749]: ******ARDAgent Launched******
Feb 24 12:28:45 ARDAgent [749]: got a sessionDict, onConsoleRef is 0xa04cd400
Feb 24 12:28:45 ARDAgent [749]: grUserOnConsole is 1
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 122
Feb 24 12:28:45 ARDAgent [749]: LoadMenuExtra: Attempting to unload menu extra
Feb 24 12:28:45 ARDAgent [749]: PostNotificationForced: Going to send notifation value 9
Feb 24 12:28:45 ARDAgent [749]: UpdatePrefs: versionFlt : 0.000000 kCurrentPrefsVersion : 3.000000
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 44
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 22
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 100
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 94
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 96
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 18
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 106
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 74
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 130
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 60
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 45
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 65
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 66
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 105
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 115
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 38
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 12
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 61
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 20
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 62
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 39
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 30
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 101
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 53
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 103
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 107
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 109
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 135
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 41
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 110
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 111
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 28
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 36
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 48
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 59
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 57
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 116
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 58
Feb 24 12:28:45 ARDAgent [749]: InitAppUsageHandlers: Called gTrackingDays is set to 0
Feb 24 12:28:45 ARDAgent [749]: CheckRFBServerPIDFile: return 679
Feb 24 12:28:45 ARDAgent [749]: RemoteCommandListenerThread init communications
Feb 24 12:28:45 ARDAgent [749]: RFBServerStart - did not kill 679
Feb 24 12:28:45 ARDAgent [749]: DOCStartDOC: No serial number. Task Server not started.
Feb 24 12:28:45 ARDAgent [749]: DT_InitLocalProcessing: Loading existing tasks from disk.
Feb 24 12:28:45 ARDAgent [749]: DT_InitLocalProcessing: Found 0 tasks
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 158
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 117
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 118
Feb 24 12:28:45 ARDAgent [749]: AddHandler: Added handler for cmdCode 162
Feb 24 12:28:45 ARDAgent [749]: ARD Agent: RFB Server exited quickly after starting - probable failure.
Feb 24 12:28:45 ARDAgent [749]: PostNotificationForced: Going to send notifation value 6
Feb 24 12:28:45 ARDAgent [749]: PostNotificationForced: Setting lastNotification to value 6
Feb 24 12:28:45 ARDAgent [749]: ******ARDAgent Ready******
Feb 24 12:29:34 Chicken of the VNC[693]: Server reports Version RFB 003.889
Feb 24 12:29:34 Chicken of the VNC[693]: Bogus RFB Protocol Version Number from AppleRemoteDesktop, switching to protocol 003.007
Feb 24 12:29:36 ARDAgent [749]: PostNotificationForced: Going to send notifation value 1
Feb 24 12:29:36 ARDAgent [749]: PostNotificationForced: Got request for kCurrentStateNotification. Sending value 6
Interesting that it says "ARD Agent: RFB Server exited quickly after starting - probable failure." That doesn't sound too good.
I will try to watch fs_usage more closely to see what else gets modified and accessed, but I'm increasingly suspicious that there's simply a bug which is showing up under whatever specific conditions I have on my machine. Perhaps the included log info will trigger an idea for someone. -
it is just 2-3 days this is happening and happened after the latest Firefox update. I have FF on my system for few years and I haven't installed anything new. MY system restore shows only Chrome (from 41.0.2272.101 to .118) and Firefox (from 36.0.4 to 37.0.1) have been updated. Never experiences similar crashes. After few min or 1-2 hour, even staying in the few open tabs that I have had open for long time, it crashes. Two different behaviors. Sometimes shows me a window and asked to close or debug. Another time shows me a window that I can report the crash and restore the browser. Sometimes it also happens that as soon as I start it it crashes but mostly stays for while.
We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste those IDs into the "Post a Reply" box.
''' Note:''' If a recent Report ID does not start with '''bp-''' click on it to submit the report.
(Please don't take a screenshot of your crashes, just copy and paste the IDs. The below image is just an example of what your Firefox screen should look like.)
;[[Image:aboutcrashesFx29|width=500]]
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article. -
Move a file to external disk and remove the original
This is a script that was supplied to me on these forums it has been working well, but all the transferring of the files took place locally so a 'Move' command does it eactly what it says, however I now need to move it to an external drive, as a result it leaves trace of the original file.
How can I make it MOVE and remove the origial File please?
set fileMatrix to {¬
{folderName:"BHS", prefixes:{"BH70", "SM70", "AL70", "BH11"}}, ¬
{folderName:"Bu", prefixes:{"BU40", "BU11"}}, ¬
{folderName:"Ca", prefixes:{"CW"}}, ¬
{folderName:"Da", prefixes:{"ES20", "AM20"}}, ¬
{folderName:"Di", prefixes:{"DV25", "DV11"}}, ¬
{folderName:"Do", prefixes:{"DJ30", "RA30", "DJ11"}}, ¬
{folderName:"In", prefixes:{"GT55", "CC55"}}, ¬
{folderName:"Fr", prefixes:{"FR10", "FR11", "FR17"}}, ¬
{folderName:"No", prefixes:{"TM17", "NN_"}}, ¬
{folderName:"Ma", prefixes:{"MA65", "MF65", "FI65", "MC65", "MH65", "MB65"}}, ¬
{folderName:"Pr", prefixes:{"PR_"}}, ¬
{folderName:"To", prefixes:{"TM15", "TM11"}}, ¬
{folderName:"Wa", prefixes:{"WA35", "WA11"}}, ¬
{folderName:"Se", prefixes:{"SE_"}}, ¬
{folderName:"Mik", prefixes:{""}}}
tell application "Finder"
--set theHotFolder to ((path to pictures folder) as text) & "HotFolderDone"
set theHotFolder to folder "StudioA:Users:StudioA:Pictures:HotFolderDone"
--set foldericon to ((path to pictures folder) as text) & "Icons:Rejected Folder Done"
set foldericon to folder "StudioA:Users:StudioA:Pictures:Icons:Rejected Folder Done"
--set fakeTrash to ((path to home folder) as text) & "FakeTrash"
set fakeTrash to folder "StudioA:Users:StudioA:FakeTrash"
set a to alias "Scratches:Workings"
repeat with matrixItem in fileMatrix -- look for folder
set destinationFolder to (folders of a whose name starts with folderName of matrixItem)
if destinationFolder is not {} then -- found one
set destinationFolder to first item of destinationFolder -- only one destination
set theFolderName to name of destinationFolder
repeat with aPrefix in prefixes of matrixItem -- look for files
repeat with startFile in ((files of theHotFolder whose name starts with aPrefix) as alias list) -- move files
try
move startFile to destinationFolder
on error
activate
display dialog "File “" & (name of startFile) & "” already exists in folder “" & theFolderName & "”. Do you want to replace it?" buttons {"Don't replace", "Replace"} default button 2 with icon 1
if (button returned of the result) is "Replace" then
set {fileName, t_ext} to {name, name extension} of startFile
if exists file fileName of fakeTrash then -- and it also exists in the fakeTrash Folder.
set name of file fileName of destinationFolder to "this is a unique name" -- or whatever
set newName to my getUniqueName(fileName, t_ext, fakeTrash)
set movedFile to move file "this is a unique name" of destinationFolder to fakeTrash
set name of movedFile to newName
else -- not exists in the fakeTrash Folder.
move file fileName of destinationFolder to fakeTrash
end if
move startFile to destinationFolder
else -- "Don't replace"
if not (exists folder "StudioA:Users:StudioA:Desktop:Rejected Folder Done") then
set theLastFolder to duplicate foldericon to desktop
else
set theLastFolder to folder "StudioA:Users:StudioA:Desktop:Rejected Folder Done"
end if
delay 0.5
move startFile to theLastFolder with replacing
end if
end try
end repeat
end repeat
end if
end repeat
try
if (count theLastFolder) is 0 then delete theLastFolder
end try
end tell
to getUniqueName(theName, theExtension, someFolder)
check if someFile exists in someFolder, creating a new unique file name (if needed) by adding a suffix
parameters - theName, theExtension : a file name and his name extension
someFolder : a folder (finder item or alias)
returns : a unique name
set {counter, suffixes, divider} to {0, "abcdefghijklmnopqrstuvwxyz", "_"}
if theExtension is not "" then set theExtension to "." & theExtension
set theName to text 1 thru -((length of theExtension) + 1) of theName -- just the name part
set newName to theName & theExtension
tell application "Finder" to set theseNames to name of items of someFolder
repeat while theseNames contains newName
set counter to counter + 1 -- hopefully there aren't more than 26 duplicates (numbers are easier)
set newName to theName & divider & (item counter of suffixes) & theExtension
end repeat
return newName
end getUniqueNameI do not have the time to read through your whole script and give specific answers, but the general principle is fairly easy. You're moving with the Finder, so your move command is going to be of the form:
tell application "Finder"
move file xxxx to folder yyyy
end tell
For cross file system moves (which are as you point out actually duplications) just add a line after each move that sends the old file to the trash:
tell application "Finder"
move file xxxx to folder yyyy
delete file xxxx
end tell
the Finder has an empty trash command that you can use at the end of the script if you like.
One gotcha: because move has two different behaviors, the second code block will throw an error if you try to use if for a local move (it will move the file properly, then try to delete the file it moved, which is obviously no longer there). For clarity, I'd use duplicate rather than move for if you're working across file systems. That's what you're actually doing, and if you use the move command you may confuse yourself when you come back to look at the script a year down the road. -
Sun JSC2 - How to download files to client
Hi, imagine a document management site.
I want to have a list of files with links that users can click to download them.
Users can upload files (with handy File Upload component), and they get saved as byte streams to a file or database or whatever.
Now, I have a page with a list of files the user can download. The file name, a link to save the file, and a link to download the file.
File1.pdf . . . DOWNLOAD IT! . . . SAVE IT!
The DOWNLOAD IT! link tries to use mime stuff to get the browser to open the file.
The SAVE IT! link tells the browser to not process the file and always bring up the save as dialog. In both cases, I don't want the browser to open a new page.
Starting with a byte[], what's the best way to do this? I searched the web, and these forums, but couldn't come up with anything that gave me a place to start from inside JSC2.
Any ideas on where to start? Thanks in advance!
MikeHey Winston, here is what I came up with... Very similar, but a little different.
Java Server Faces File Download Tutorial by Michael Cole
Java Server Faces, abstracts much of the monotonous detail of web programming, letting application developers develop applications, instead of programming servers.
This tutorial explains how to dip just a little under the covers to serve files to a browser. The browser can then interpret this binary data using MIME types. Some common MIME types are �text/plain�, �text/html�, or �application/pdf� or �application/x-unknown�.
How the browser behaves when interacting with these MIME types is based on the client browser's configuration. Because this configuration is different for every browser, let's create two different behaviors:
* First Behavior: When a link is clicked, the browser downloads and �opens� the file, either displaying the file itself, or choosing an appropriate program: zip file program, pdf program, etc.
* Second Behavior: The browser always offers to save the file, no matter what.
At the most basic level, we want to cause this chain of events:
1. Cause browser to send a request to the server.
2. Have the server create a response that sends the file to the client.
For my purposes, the browser should not navigate to a new page for this behavior.
A mockup might look like this:
Files you can download:
Secrets of the Universe.txt
Open it!
Save it!
Perfect love and happiness.pdf
Open it!
Save it!
Make a million dollars now.swf
Open it!
Save it!
To accomplish this, we will execute this code on the server:
// Find the HttpServletResponse object for this request.
// With this object, we can create a response that sends the file.
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse) faces.getExternalContext().getResponse();
// We can also get information about what the browser requested.
// This could tell us what data to send
HttpServletRequest request = (HttpServletRequest) faces.getExternalContext().getRequest();
// Your data can be stored in a database, generated at runtime, or whatever you choose.
// We getSomeData() from an arbitrary location. This depends on your application.
byte[] data = getSomeData(request);
// In the response, we will specify a file name to present to the user.
String filename = "myFile.txt";
// Now we have the data to send, and the response object to send it with.
// Next we give the browser some hints on what to do with the file.
// Note that different browsers will behave differently and you have no control over this.
// We'll use different mime types to implement the different "Open" and "Save" behaviors.
// "application/x-unknown" will be the MIME type used for the "Save" behavior.
response.setContentType(mimeType);
// We tell the browser how much data to expect.
response.setContentLength(data.length);
// Cross-browser hack for Firefox 1.0.7 and IE 6 compatibility.
// IE 6 ignores the MIME type and decides based on the "attachment" or "inline"
if (mimeType.equals("application/x-unknown")) {
// Show the "Save As..." dialog
response.setHeader( "Content-disposition", "attachment; filename=\"" + filename + "\"");
} else {
// attempt to "open" the file
response.setHeader( "Content-disposition", "inline; filename=\"" + filename + "\"");
// Now we start sending data with the response object.
// You might consider using a buffer if your data comes from a large file
// or a database.
try {
ServletOutputStream out;
out = response.getOutputStream();
out.write(data);
} catch (IOException e) {
e.printStackTrace();
// Lastly and very importantly, we tell Java Server Faces that
// the request has been handled and not to process it any more.
faces.responseComplete();
Now all we have to do is put this code somewhere.
Step 1: Build the page UI.
* Create a new page in Java Studio Creator. Let's call it �download.jsp�
* Make it the start page (right-click)
* Add a hyperlink component and call it �Open!�
* If you like, add a static text that describes your file.
Step 2: Tell Java Server Faces what to do when the hyperlink is clicked.
* Doubleclick the hyperlink and add this code to it's action:
public String hyperlink1_action() {
// TODO: Replace with your code
DownloadBean d = new DownloadBean();
d.sendFile("text/plain");
return null;
* Compile the download.java and get a �cannot find symbol for class DownloadBean�. Now we have a place to put our code to send the file!
Step 3: Build the DownloadBean that will serve the file.
* Go to your "Source Packages" folder and create a new Java class in the project's package. Call this class �DownloadBean�.
* Copy this code into the class:
public void sendFile(String mimeType) {
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse) faces.getExternalContext().getResponse();
HttpServletRequest request = (HttpServletRequest) faces.getExternalContext().getRequest();
byte[] data = getSomeData(request);
String filename = "myFile.txt";
// Note that different browsers will behave differently and you have no control over this.
// We'll use different mime types to implement the different "Open" and "Save" behaviors.
// "application/x-unknown" will be the MIME type used for the "Save" behavior.
response.setContentType(mimeType);
response.setContentLength(data.length);
// Cross-browser hack for Firefox 1.0.7 and IE 6 compatibility.
// IE 6 ignores the MIME type and decides based on the "attachment" or "inline"
if (mimeType.equals("application/x-unknown")) {
// Show the "Save As..." dialog
response.setHeader( "Content-disposition", "attachment; filename=\"" + filename + "\"");
} else {
// attempt to "open" the file
response.setHeader( "Content-disposition", "inline; filename=\"" + filename + "\"");
// Now we start sending data with the response object.
try {
ServletOutputStream out;
out = response.getOutputStream();
out.write(data);
} catch (IOException e) {
e.printStackTrace();
faces.responseComplete();
* Hit Ctrl-Shift-F to make the code pretty.
* Try and compile DownloadBean.java. Build->Compile
* As expected, you will get a variety of �cannot find symbol� errors.
* Hit Ctrl-Alt-F to clean these up, by automatically adding the proper imports.
* Try and compile again and you will get a �cannot find symbol� error for the getSomeData() function. That's ok cause we didn't write it yet.
* Copy this code into the DownloadBean class:
public byte[] getSomeData(Object o) {
// ignore the HttpServletRequest object and return some data.
return "Hello World!".getBytes();
* Compile the file one last time to get a clean compile.
Why didn't we put this code directly in the hyperlink1_action() function? Because we are separating the �model� from the "view" and "controller". DownloadBean can be reused in any page of your application now.
Step 4: Test
1. Run the project and open the page in the Firefox web browser.
2. Click the �Open It!� hyperlink
3. A text file should appear in Firefox that says �Hello World!�
Great! We sent the file, Firefox interpreted the �text/plain� MIME type, and presented the text as a browser page. This covers our �Open It!� functionality.
To serve other kinds of files, pass a different MIME type in the sendFile() function.
For a list of MIME types, check out http://www.webmaster-toolkit.com/mime-types.shtml
Step 5: Save It! Functionality.
What if we always want the file to be saved, no matter what foolishness the browser wants to do with the file?
* Go back to the Design of download.jsp.
* Add another hyperlink to the page, label it �Save It!�
* Double click the hyperlink and JSC2 will take you to its action function.
* Add this code to the function
public String hyperlink2_action() {
// TODO: Replace with your code
DownloadBean d = new DownloadBean();
d.sendFile("application/x-unknown");
return null;
Notice the difference in the MIME type? We changed �text/plain� to �application/x-unknown�. Notice also in the sendFile() function the cross-browser hack to get IE 6.0 to save or open the file.
* Run the project one last time.
* Test with Firefox
* Test with Internet Explorer
Done! -
Multiple Edits in Photoshop not saving into Lightroom?
In Lightroom 3 I was able to edit in Photoshop, save the file, then make another edit in photoshop and save it under a different name, and that file would also show up in Lightroom.
For example;
in Lightroom I select "Image 1" and select edit in photoshop,
I edit this in photoshop and save.
Lightroom shows "Image 1-edit"
I make another edit and select "Save As" and save it as "Image 1 Alternate".
"Image 1 Alternate" shows up in Lightroom next to "Image 1-edit"
This does not appear to be happening with Lightroom 4. Is there a setting I'm missing somewhere?
Thanks for your repliesMedic1542 wrote:
Additional "save as" edits are saved into Lightroom 3. It does not "break the link".
I'm assuming here that you are using Photoshop CS5.x and the current version of Camera Raw? If so, this is as expected...LR4 is using a pipeline that will match up to ACR 7 when it's released.
As it is now, LR4 must actually do the processing prior tp sending it to Photoshop. LR4 also has to save the file on disk prior to sending it to Photoshop.
If you were using ACR 7 in CS6 then ACR would actually be doing the processing and the behavior of this way of opening in Photoshop does NOT have to save the file prior to sending it to Photoshop. When ACR does the opening, you can do a Save or a Save As and Lightroom will know about those saves. Pretty LR4 doesn't know where the Save As file goes to and that's why it isn't showing up.
The two basic behaviors; LR synced with ACR and LR not synced with ACR goes back to version 2 (I think). It's a limitation in LR when LR and ACR aren't in sync. -
I can't understand... I used the black template and I had two different behaviors:
in the "about me" page the text box on the left after the publishing has been exported as image (keeping the hyperlinks) while all other pages every text box has been published as a TEXT BOX!! How can I set Iweb to export EVERY TEXT BOX as image???
Please, it's driving me crazy!!
thanksThere's a simple workaround to this problem which also drove me nuts. On version 1.1.1 at least the problem is with the templates. Don't put your main text into the boxes provided - use this as a title box or leave it blank (it seems to need to have something in it as you can't get rid of the box itself although you can shrink it down). Create a new text box and paste your text into it and it should render as text- it did on mine. Don't forget to use a single, web friendly, simple font as other contributers have suggested.
Check the pages in the personal development section of my site -
www.thecontinuum.org.uk
Strangely the first page just wouldn't do the same thing without goofing up the rest of the page- putting hyperlinks in thwrong place etc. I left it as image in the end- if anyone knows what's going on there then let us know. -
Automatic insertion of spaces in telephone numbers in iPhone OS 3.0.1
Hello!
I think there are two annoying behaviors in iPhone OS 3.0.1:
• if you go to contacts, create a new contact and enter a telephone number there will be inserted automatically spaces into the telephone number. One the one hand this behavior can be very practical (for example if iPhone 3.0.1 identify thereby already used formats of telephone numbers), on the other hand this behavior can be very annoying (for example if you want to create a special format for one telephone number). If you synchronize telephone numbers from your iMac to your iPhone, iPhone OS 3.0.1 put also automatically spaces into synchronized numbers.
• there is also missing a hyphen in the number keyboard to insert into the telephone number in iPhone OS 3.0.1.
First I think it would be a very good if there would be a function in iPhone OS 3.1 which deactivates the automatic insertion of spaces, secondly I think there should be a a hyphen in the number keyboard to insert into the telephone number in iPhone OS 3.0.1.
How do you think about my suggestions?
Message was edited by: Roman Patrice Gegook after all summer have this toy (BETA )iphone upgrade to 3.0.1 still drop calls so i send it for repair or replace i can write full pages regarding that beta product i need to find tonight to send mail to EU as a customer i need to find my right i pay 600 euro in 10/06/09 and still is not working properly as it must be A PHONE i am professional and i need my phone to work as a tool i wll reply too all that will ask me my phone number exept my e-mail are
[email protected]
0035799845222
Maybe you are looking for
-
How can I delete files from My Mac Book Pro safely to create more space?
Hi, I need to delete files from my Mac Book Pro and I am not sure how to do it safely without affecting my computers drivers or operations. In my Finder - All Files Section there are certain files in the Preview, marked as "PNG Image", Window Image,
-
- I created a panel with a titled border. - I have a background image. - There is a gray rectangle around the title in the border that I don't want to have because I want to see the background image. How can I handle this?? With panel I used setOpaqu
-
Installer could not validate...
I was using software update to get 10.5.8 and the garageband update but when the files were downloaded and about to be installed, I received the error message: "installer could not validate contents of the (garageband/10.5.8) package". I have looked
-
Installing Flash Player on More Than One Browser
I have installed the latest Adobe Flash Player. It apparently is "on" Google Chrome but I also want it on Safari. I know it's not yet on there because the videos and LiveStream and such are no longer working (as of today). I have tried to put it on S
-
Need help with File Sharing and iPHOTO Library sharing........
I recently upgraded my imac and my macbook pro to Mavericks. I have some problems now. Previously using iPHOTO when running I was able to see the other computers iphoto library on the left side bar. I was able then to access the other computers ipho