Two Negative points in ICS

First of all i appreciate Sony for their work on ICS.
But i found two major negative points in ICS.
1) Screenshot is no longer available in this version,
2) When screen is in lock, it does not show the Notifications for Unread messages, Missed calls and others notificationt
I request u to update the version by solving this issue.

As far as I am aware, the last point you made is correct but may be something which included in the future. Once you have received the update for your particular handset, I'd suggest testing these features and providing feedback on the following link
http://talk.sonymobile.com/thread/35431
What do you think about this forum? Let us know by doing this short survey

Similar Messages

Massive Negative Point Balance and Reward Certificates That I Don't Want

I made a purchase near black friday and then returned it January (it was defective). In the meantime I was issued $15 in certificates. After the return I now have a massive negative point balance (-363). I don't like having such a negative points balance and I don't need purchase anything in the time-frame before the certificates expire. I would therefore like to return (or invalidate) the certificates and have those points added back to my account. Also if I remember correctly I only returned a $200 tablet, so I don't understand how I got to -363 points.
Thank you
Solved!
Go to Solution.

Greetings jl2015, and welcome to the Best Buy forum,
I would not want to have a negative point balance either, as it could potentially cause issues with any points that are awarded for purchases you make in the future. I looked over your My Best Buy™ account using the email address you registered with the forum and can see exactly why your point balance went negative. Let me see what I can do to help.
As you mentioned, you recently returned an item that had been purchased back on Black Friday. That return would have resulted in any points you were awarded for the original purchase to be deducted from your account, and since the pre-tax total was about $200 and you used a Best Buy credit card, almost 500 points were deducted from your account. You did not have sufficient points in your account when the return was processed because they had been converted into two certificates.
In most cases, active certificates in a member's account will be voided and the point values added to their balance in-order to help when there is a negative balance. The two certificates that you have in your account could help bring you out of the negative. I will be sending you a private message so that I can go over your My Best Buy™ account with you in additional detail. To check your private messages, you will want to login to the forum and click on the envelope at the top of the page.
Thank you for posting and for being a My Best Buy™ member!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

How can I find out the angle of a straight line between two anchor points?

I would like to extend a line which is at a given angle (not 45,90 degree). Is there a quick and reliable way to do this? or to find out the angle of a segment?
What I'm doing at the moment is just direct selecting an anchor point and using the visual guides to extend it. I don't think this is exact though so was I wondering if anyone had any techniques for doing this?
Thanks!

portfelio,
Smart Guides are your friends.
As a general solution, you may:
1) With the Line Segment Tool ClickDrag between the two Anchor Points (Smart Guides say anchor);
2) With the appropriate Reference Point selected in the Transform palette, increase the W or H value and Ctrl/Cmd+Enter;
3) Lock the new auxiliary line;
4) ClickDrag the relevant Anchor Point of the original line along the extended auxiliary line (Smart Guides say path);
5) Unlock and delete the auxiliary line.
After 1), you may also click the Line Segment Tool to see the angle.
Or, in a case with a straight path (segment), you may use the Scale Tool:
1) (Direct) Select the straight path (segment);
2) Switch to the Scale Tool and Click the Anchor Point that is to stay, then ClickDrag the one to move (Smart Guides say uniform when you are dragging in the right direction).

Color Highlights not working in bar chart with two data points

Iu2019m using Crystal Reports 2011. I have created a bar graph using two data fields in the Chart Expert. I have set the colors for the bars in the Color Highlights tab, but the colors that I have defined have not been applied to the graph.
I have tried changing the colors numerous times and have done it in both design and preview modes. It seems to be somethign with having two data points because I don't have this problem when using just one data point. Please help!

is the colour mode Color by group or color by series

Measuring power at two different point (single phase)

Hi all,
I am new user of LabVIEW 2013 with electrical power suite.
May i know how to measure two different point of single phase system using the same VI such as in DAQ power and energy example?
As I notice that there are several type of wiring available. Is only one voltage and one current availabe during 1 ph voltage and 1 current selection. Thus, when I select 3ph voltage and 2 current, the value I obtain is not seem to be true.
From the figure attached, I want to measure the voltage at current at the solar/PV to obtain the power value. Other than that, I also need to measure the voltage and current at the load such as water heater. This is a single phase configuration network.
(2 voltage and 2 current measurement at single phase)
Hope for guidance.

Hi Lewis,
Here attached the file.
Actually I wanted to measure power two different point in a single phase system as shown in the first attachement.
Since, there is example in power quality measurement(DAQ) as shown in the second attachment.
since there is two measuring point in my measurement. May i know how to obtain two measurement voltage at the same time in DAQ?
Hope for guidance.
Attachments:
Two measuremernt point (single phase).png ‏7 KB
power & energy measurement.jpg ‏172 KB

How to dispaly two dicimal points

How to dispaly two dicimal points in java (Example 1) 5.70 Example 2) 561 but it should display as 561.00)
Example1) Here I am able to display 5.7 but it should display as 5.70
Example 2) Here I am able to display 561 but it should display as 561.00
Following is the code I wrote
package oracle.apps.ont.margin.server;
import java.text.NumberFormat;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.server.OAViewRowImpl;
import oracle.jbo.domain.Number;
import oracle.jbo.server.AttributeDefImpl;
public class GetOrderLineDetailsVORowImpl extends OAViewRowImpl
public GetOrderLineDetailsVORowImpl()
mDECIMAL_PLACES = 2;
public Number getHeaderId()
return (Number)getAttributeInternal(0);
public void setHeaderId(Number value)
setAttributeInternal(0, value);
public Number getLineId()
return (Number)getAttributeInternal(1);
public void setLineId(Number value)
setAttributeInternal(1, value);
public Number getLineTypeId()
return (Number)getAttributeInternal(2);
public void setLineTypeId(Number value)
setAttributeInternal(2, value);
public String getLineNumber()
return (String)getAttributeInternal(3);
public void setLineNumber(String value)
setAttributeInternal(3, value);
public String getOrderedItem()
return (String)getAttributeInternal(4);
public void setOrderedItem(String value)
setAttributeInternal(4, value);
public String getOrderQuantityUom()
return (String)getAttributeInternal(5);
public void setOrderQuantityUom(String value)
setAttributeInternal(5, value);
public Number getPricingQuantity()
return (Number)getAttributeInternal(6);
public void setPricingQuantity(Number value)
setAttributeInternal(6, value);
public String getPricingQuantityUom()
return (String)getAttributeInternal(7);
public void setPricingQuantityUom(String value)
setAttributeInternal(7, value);
public Number getOrderedQuantity()
return (Number)getAttributeInternal(8);
public void setOrderedQuantity(Number value)
setAttributeInternal(8, value);
public Number getUnitSellingPrice()
return (Number)getAttributeInternal(9);
public void setUnitSellingPrice(Number value)
setAttributeInternal(9, value);
public Number getUnitListPrice()
return (Number)getAttributeInternal(10);
public void setUnitListPrice(Number value)
setAttributeInternal(10, value);
public String getItemTypeCode()
return (String)getAttributeInternal(11);
public void setItemTypeCode(String value)
setAttributeInternal(11, value);
public String getLineCategoryCode()
return (String)getAttributeInternal(12);
public void setLineCategoryCode(String value)
setAttributeInternal(12, value);
public String getItemIdentifierType()
return (String)getAttributeInternal(13);
public void setItemIdentifierType(String value)
setAttributeInternal(13, value);
public Number getUnitCost()
return (Number)getAttributeInternal(14);
public void setUnitCost(Number value)
setAttributeInternal(14, value);
public Number getRebate()
return (Number)getAttributeInternal(15);
public void setRebate(Number value)
setAttributeInternal(15, value);
public Number getDiscount()
Number vUnitListPrice = getUnitListPrice();
if(vUnitListPrice == null)
vUnitListPrice = new Number(0);
Number vUnitSellingPrice = getUnitSellingPrice();
if(vUnitSellingPrice == null)
vUnitSellingPrice = new Number(0);
Number vRebate = getRebate();
if(vRebate == null)
vRebate = new Number(0);
double discount = (vUnitListPrice.doubleValue() - vUnitSellingPrice.doubleValue()) + vRebate.doubleValue();
if(discount < (double)0)
discount = 0.0D;
NumberFormat form = NumberFormat.getInstance();
form.setMaximumFractionDigits(mDECIMAL_PLACES);
try
Number number = new Number(form.parse(form.format(discount)));
return number;
catch(Exception e)
throw OAException.wrapperException(e);
public void setDiscount(Number value)
setAttributeInternal(16, value);
public Number getMargin()
Number vUnitSellingPrice = getUnitSellingPrice();
if(vUnitSellingPrice == null)
vUnitSellingPrice = new Number(0);
Number vRebate = getRebate();
if(vRebate == null)
vRebate = new Number(0);
Number vUnitCost = getUnitCost();
if(vUnitCost == null)
vUnitCost = new Number(0);
try
Number vMargin = new Number((vUnitSellingPrice.doubleValue() + vRebate.doubleValue()) - vUnitCost.doubleValue());
NumberFormat form = NumberFormat.getInstance();
form.setMaximumFractionDigits(mDECIMAL_PLACES);
Number number = new Number(form.parse(form.format(vMargin.doubleValue())));
return number;
catch(Exception e)
throw OAException.wrapperException(e);
public void setMargin(Number value)
setAttributeInternal(17, value);
public Number getExtendedListPrice()
if(getUnitListPrice() != null && getPricingQuantity() != null)
return getUnitListPrice().multiply(getPricingQuantity());
else
return new Number(0);
public void setExtendedListPrice(Number value)
setAttributeInternal(18, value);
public Number getExtendedDiscount()
if(getDiscount() != null && getPricingQuantity() != null)
return getDiscount().multiply(getPricingQuantity());
else
return new Number(0);
public void setExtendedDiscount(Number value)
setAttributeInternal(19, value);
public Number getExtendedRebate()
if(getPricingQuantity() != null && getRebate() != null)
return getPricingQuantity().multiply(getRebate());
else
return new Number(0);
public void setExtendedRebate(Number value)
setAttributeInternal(20, value);
public Number getExtendedSellingPrice()
if(getUnitSellingPrice() != null && getPricingQuantity() != null)
return getUnitSellingPrice().multiply(getPricingQuantity());
else
return new Number(0);
public void setExtendedSellingPrice(Number value)
setAttributeInternal(21, value);
public Number getExtendedCost()
if(getUnitCost() != null && getPricingQuantity() != null)
return getUnitCost().multiply(getPricingQuantity());
else
return new Number(0);
public void setExtendedCost(Number value)
setAttributeInternal(22, value);
public Number getExtendedMargin()
if(getPricingQuantity() != null && getTempMargin() != null)
try
Number vMargin = getTempMargin().multiply(getPricingQuantity());
NumberFormat form = NumberFormat.getInstance();
form.setMaximumFractionDigits(mDECIMAL_PLACES);
Number number = new Number(form.parse(form.format(vMargin.doubleValue())));
return number;
catch(Exception e)
throw OAException.wrapperException(e);
else
return new Number(0);
public void setExtendedMargin(Number value)
setAttributeInternal(23, value);
public Number getMarginPercent()
double vMarginAmount = 0.0D;
vMarginAmount = getUnitSellingPrice().doubleValue();
if(vMarginAmount == (double)0)
return new Number(100);
vMarginAmount = (getMargin().doubleValue() * (double)100) / vMarginAmount;
Number marginPercent = null;
try
marginPercent = new Number(vMarginAmount);
catch(Exception e)
e.printStackTrace();
NumberFormat form = NumberFormat.getInstance();
form.setMaximumFractionDigits(mDECIMAL_PLACES);
try
Number number = new Number(form.parse(form.format(marginPercent.doubleValue())));
return number;
catch(Exception e)
throw OAException.wrapperException(e);
public void setMarginPercent(Number value)
setAttributeInternal(24, value);
protected Object getAttrInvokeAccessor(int index, AttributeDefImpl attrDef)
throws Exception
switch(index)
case 0: // '\0'
return getHeaderId();
case 1: // '\001'
return getLineId();
case 2: // '\002'
return getLineTypeId();
case 3: // '\003'
return getLineNumber();
case 4: // '\004'
return getOrderedItem();
case 5: // '\005'
return getOrderQuantityUom();
case 6: // '\006'
return getPricingQuantity();
case 7: // '\007'
return getPricingQuantityUom();
case 8: // '\b'
return getOrderedQuantity();
case 9: // '\t'
return getUnitSellingPrice();
case 10: // '\n'
return getUnitListPrice();
case 11: // '\013'
return getItemTypeCode();
case 12: // '\f'
return getLineCategoryCode();
case 13: // '\r'
return getItemIdentifierType();
case 14: // '\016'
return getUnitCost();
case 15: // '\017'
return getRebate();
case 16: // '\020'
return getDiscount();
case 17: // '\021'
return getMargin();
case 18: // '\022'
return getExtendedListPrice();
case 19: // '\023'
return getExtendedDiscount();
case 20: // '\024'
return getExtendedRebate();
case 21: // '\025'
return getExtendedSellingPrice();
case 22: // '\026'
return getExtendedCost();
case 23: // '\027'
return getExtendedMargin();
case 24: // '\030'
return getMarginPercent();
case 25: // '\031'
return getExtendedMarginPercent();
case 26: // '\032'
return getTempMargin();
return super.getAttrInvokeAccessor(index, attrDef);
protected void setAttrInvokeAccessor(int index, Object value, AttributeDefImpl attrDef)
throws Exception
switch(index)
case 0: // '\0'
setHeaderId((Number)value);
return;
case 1: // '\001'
setLineId((Number)value);
return;
case 2: // '\002'
setLineTypeId((Number)value);
return;
case 3: // '\003'
setLineNumber((String)value);
return;
case 4: // '\004'
setOrderedItem((String)value);
return;
case 5: // '\005'
setOrderQuantityUom((String)value);
return;
case 6: // '\006'
setPricingQuantity((Number)value);
return;
case 7: // '\007'
setPricingQuantityUom((String)value);
return;
case 8: // '\b'
setOrderedQuantity((Number)value);
return;
case 9: // '\t'
setUnitSellingPrice((Number)value);
return;
case 10: // '\n'
setUnitListPrice((Number)value);
return;
case 11: // '\013'
setItemTypeCode((String)value);
return;
case 12: // '\f'
setLineCategoryCode((String)value);
return;
case 13: // '\r'
setItemIdentifierType((String)value);
return;
case 14: // '\016'
setUnitCost((Number)value);
return;
case 15: // '\017'
setRebate((Number)value);
return;
case 16: // '\020'
setDiscount((Number)value);
return;
case 17: // '\021'
setMargin((Number)value);
return;
case 18: // '\022'
setExtendedListPrice((Number)value);
return;
case 19: // '\023'
setExtendedDiscount((Number)value);
return;
case 20: // '\024'
setExtendedRebate((Number)value);
return;
case 21: // '\025'
setExtendedSellingPrice((Number)value);
return;
case 22: // '\026'
setExtendedCost((Number)value);
return;
case 23: // '\027'
setExtendedMargin((Number)value);
return;
case 24: // '\030'
setMarginPercent((Number)value);
return;
case 25: // '\031'
setExtendedMarginPercent((Number)value);
return;
case 26: // '\032'
setTempMargin((Number)value);
return;
super.setAttrInvokeAccessor(index, value, attrDef);
public Number getExtendedMarginPercent()
double vMarginAmount = 0.0D;
Number vUnitSellingPrice = getUnitSellingPrice();
if(vUnitSellingPrice == null)
vUnitSellingPrice = new Number(0);
Number vRebate = getRebate();
if(vRebate == null)
vRebate = new Number(0);
vMarginAmount = vUnitSellingPrice.doubleValue() + vRebate.doubleValue();
if(vMarginAmount == (double)0)
return new Number(100);
Number vMargin = getMargin();
if(vMargin == null)
vMargin = new Number(0);
vMarginAmount = (vMargin.doubleValue() * (double)100) / vMarginAmount;
Number marginPercent = null;
try
marginPercent = new Number(vMarginAmount);
catch(Exception e)
e.printStackTrace();
NumberFormat form = NumberFormat.getInstance();
form.setMaximumFractionDigits(mDECIMAL_PLACES);
try
Number number = new Number(form.parse(form.format(marginPercent.doubleValue())));
return number;
catch(Exception e)
throw OAException.wrapperException(e);
public void setExtendedMarginPercent(Number value)
setAttributeInternal(25, value);
public Number getTempMargin()
Number vUnitSellingPrice = getUnitSellingPrice();
if(vUnitSellingPrice == null)
vUnitSellingPrice = new Number(0);
Number vRebate = getRebate();
if(vRebate == null)
vRebate = new Number(0);
Number vUnitCost = getUnitCost();
if(vUnitCost == null)
vUnitCost = new Number(0);
try
Number vTempMargin = new Number((vUnitSellingPrice.doubleValue() + vRebate.doubleValue()) - vUnitCost.doubleValue());
Number number = vTempMargin;
return number;
catch(Exception e)
throw OAException.wrapperException(e);
public void setTempMargin(Number value)
setAttributeInternal(26, value);
protected static final int HEADERID = 0;
protected static final int LINEID = 1;
protected static final int LINETYPEID = 2;
protected static final int LINENUMBER = 3;
protected static final int ORDEREDITEM = 4;
protected static final int ORDERQUANTITYUOM = 5;
protected static final int PRICINGQUANTITY = 6;
protected static final int PRICINGQUANTITYUOM = 7;
protected static final int ORDEREDQUANTITY = 8;
protected static final int UNITSELLINGPRICE = 9;
protected static final int UNITLISTPRICE = 10;
protected static final int ITEMTYPECODE = 11;
protected static final int LINECATEGORYCODE = 12;
protected static final int ITEMIDENTIFIERTYPE = 13;
protected static final int UNITCOST = 14;
protected static final int REBATE = 15;
protected static final int DISCOUNT = 16;
protected static final int MARGIN = 17;
protected static final int EXTENDEDLISTPRICE = 18;
protected static final int EXTENDEDDISCOUNT = 19;
protected static final int EXTENDEDREBATE = 20;
protected static final int EXTENDEDSELLINGPRICE = 21;
protected static final int EXTENDEDCOST = 22;
protected static final int EXTENDEDMARGIN = 23;
protected static final int MARGINPERCENT = 24;
protected static final int EXTENDEDMARGINPERCENT = 25;
protected static final int TEMPMARGIN = 26;
int mDECIMAL_PLACES;
package oracle.apps.ont.margin.server;
import java.text.NumberFormat;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.jbo.ViewLink;
import oracle.jbo.domain.Number;
import oracle.jbo.server.ApplicationModuleImpl;
import oracle.jbo.server.ViewLinkImpl;
// Referenced classes of package oracle.apps.ont.margin.server:
// GetOrderLineDetailsVOImpl, GetOrderLineDetailsVORowImpl, GetOrderHeadersVOImpl
public class MaintainOrdersAMImpl extends OAApplicationModuleImpl
public MaintainOrdersAMImpl()
mDECIMAL_PLACES = 2;
public String computeMarginPercent()
double dTotalSellPrice = 0.0D;
double dTotalRebate = 0.0D;
double dTotalMargin = 0.0D;
GetOrderLineDetailsVORowImpl orderlineRow = null;
GetOrderLineDetailsVOImpl orderVO = (GetOrderLineDetailsVOImpl)findViewObject("GetOrderLineDetailsVO");
orderVO.reset();
while(orderVO.hasNext())
orderlineRow = (GetOrderLineDetailsVORowImpl)orderVO.next();
dTotalSellPrice += orderlineRow.getExtendedSellingPrice().doubleValue();
dTotalRebate += orderlineRow.getExtendedRebate().doubleValue();
dTotalMargin += orderlineRow.getExtendedMargin().doubleValue();
NumberFormat form = NumberFormat.getInstance();
form.setMaximumFractionDigits(mDECIMAL_PLACES);
return form.format((dTotalMargin * 100D) / dTotalSellPrice);
public void getContextInfo(String pHeaderId)
GetOrderHeadersVOImpl orderVO = (GetOrderHeadersVOImpl)findViewObject("GetOrderHeadersVO");
if(orderVO != null)
try
Number numHeaderId = new Number(pHeaderId);
orderVO.initQuery(numHeaderId);
orderVO.reset();
orderVO.next();
oracle.jbo.Row ro = orderVO.getCurrentRow();
if(ro != null)
GetOrderLineDetailsVOImpl linesVO = (GetOrderLineDetailsVOImpl)findViewLink("HeaderToLinesVL1").getDestination();
if(linesVO != null)
linesVO.first();
catch(Exception exception) { }
public GetOrderHeadersVOImpl getGetOrderHeadersVO()
return (GetOrderHeadersVOImpl)findViewObject("GetOrderHeadersVO");
public GetOrderLineDetailsVOImpl getGetOrderLineDetailsVO()
return (GetOrderLineDetailsVOImpl)findViewObject("GetOrderLineDetailsVO");
public ViewLinkImpl getHeaderToLinesVL1()
return (ViewLinkImpl)findViewLink("HeaderToLinesVL1");
public static void main(String args[])
ApplicationModuleImpl.launchTester("oracle.apps.ont.margin.server", "MaintainOrdersAMLocal");
int mDECIMAL_PLACES;
Please help me in this regard.
Thanks in advance.

hi,
With this code u can show 451 as 451.0
see my it will help u.
import java.util.*;
import java.text.*;
public class DecimalFormatDemo {
static public void customFormat(String pattern, double value ) {
DecimalFormat myFormatter = new DecimalFormat(pattern);
String output = myFormatter.format(value);
System.out.println(value + " " + pattern + " " + output);
static public void main(String[] args) {
customFormat("######.##", 123456);
}

Two mount points for ipod.

Hi there,
When I connect the IPOD there appear two moint points. One with the name of the device (in this case Mike) and one with the name 'Ipod'.
The first works fine so I can sync with banshee without problems. The second throws the following error:
Unable to mount the volume 'Ipod'
Details:
mount: wrong fs type. bad option. bad superblock on dev/sdb1. missing codepage or helper program. or other error in some cases useful info is found in syslog - try dmesg | tail or so
dmesg output:
[miguel@miguel ~]$ dmesg | tail -40
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 68 00 00 08
sd 9:0:0:0: [sdb] Assuming drive cache: write through
usb-storage: device scan complete
sd 9:0:0:0: [sdb] 39075372 2048-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 9:0:0:0: [sdb] Attached SCSI removable disk
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
sdb: detected capacity change from 80026361856 to 0
Clocksource tsc unstable (delta = 4398030963787 ns)
ath5k phy0: unsupported jumbo
usb 1-2: USB disconnect, address 6
usb 1-2: new high speed USB device using ehci_hcd and address 7
usb 1-2: configuration #1 chosen from 2 choices
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 10:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 10:0:0:0: [sdb] 39075372 2048-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 68 00 00 08
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] 39075372 2048-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 10:0:0:0: [sdb] Attached SCSI removable disk
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
[miguel@miguel ~]$
¿Any help or ideas?
Thanks

The post of dlew86 is the good way to do it, but there is some errors in what he wrote:
First, you need to know what is the label of the firmware partition:
$ lshal -u `hal-find-by-property --key block.device --string /dev/sdd1` | grep volume.label
volume.label = 'iPod' (string)
replace '/dev/sdd1' by the device your ipod uses. The default label is 'iPod', but if you installed RockBox, it is probably different.
Now, create a fdi file in /etc/hal/fdi/policy/, e.g. 99-ipod-ignore-firmware.fdi (.fdi, not .rules like owain wrote):
<?xml version="1.0" encoding="UTF-8" ?>
<deviceinfo version="0.2">
<device>
<match key="volume.label" string="iPod">
<merge key="volume.ignore" type="bool">true</merge>
</match>
</device>
</deviceinfo>
Replace "iPod" by the label you got with the lshal command.
If volume.label is empty, you can match against the volume.uuid property instead. But in this case, the rule will apply to your ipod only.
Now, restart hal:
# /etc/rc.d/hal restart
It restart fails, it is probably due to some hald helpers still running. This should solve the problem:
# pkill hald
# /etc/rc.d/hal start
Last edited by vdust (2009-10-05 20:02:13)

Two decimal points

Greetings
What would be the syntax if I want to use use '999G999G990D00' to show only two decimal points for outstanding_receipt_value in the following
((declared_quantity - delivered_qty) * po_unit_price) outstanding_receipt_valueThank you

if i understand your posting correctly and you want only those numbers that are covered by decimal. you might want to give this a try.
substr(to_char(((declared_quantity - delivered_qty) * po_unit_price),'999G999G990D00'),
       instr(to_char(((declared_quantity - delivered_qty) * po_unit_price),'999G999G990D00') ,'.')+1) new_stre.g.
SQL> select str,
2         instr(str,'.') pos,
3         substr(str,instr(str,'.')+1) new_str
4     from (select to_char(123456789.99,'999G999G990D00') str from dual);
STR                    POS NEW_STR
123,456,789.99         13 99

Two Datasources pointing to one connection pool...

Hi All,
I have heard you should not have two datasources pointing to one connection pool that each datasource should have it's own pool. What type problems would occur if you did that in WLS 8.1? I heard in 9.2 and above you are not allowed to do that and I suspect it is because of some issue doing many (datasources) to one (connection pool).
Any comments about this?
Thanks,
-Tony

Hi Hector
Could you refer the SCN & SAP links
SAP WEB Dispatcher and DMZ
Access SAP Webgui and Portal Through Internet Using Web dispatcher
https://help.sap.com/saphelp_nwce10/helpdata/en/48/8fe37933114e6fe10000000a421937/frameset.htm
SAP Web Dispatcher - SAP Library
BR
SS

How to delete a path between two anchor points

hi ,
it's all in the title ,
could you tell me please how to delete a path between two anchor points without using the path eraser tool ?
When I select these two anchor points and press delete everything is gone.
ps : I want to keep the anchor points after the deletion
Thank you

Silkrooster wrote:
With some experimentation, I did find that selecting the path can leave orphan points. So keep that in mind as it may be necessary to use Object>Path>Clean up...
You will not get orphan points if you delete a segment that is not at the end of a path. For segment that is at the end of a path, or is the entire path, select the end point/s and press delete. For the one segment that is entire path you can use the selection tool (black pointer) or hold Alt with the direct selection tool (white pointer) which is useful for objects in a group.

Precision to two decimal points and...

How do I format an output line for two decimal point precision with a double variable?
also...
What is the best way to clear the screen? I am using the sun compiler with Windows 2000.

He's right, using Java to clear the screen is not pretty. Here is a rudementary solution:
public class ClearScreen {
   public static void main(String args[]) {
      //clear the screen
      String[] commands = new String[4];
      commands[0] = "mode.com";
      commands[1] ="con";
      commands[2] = "cols=80";
      commands[3] = "lines=50";
      try {
         Runtime.getRuntime().exec(commands);
      } catch (java.io.IOException ioe) { ioe.printStackTrace(); }
      //print a formatted decimal number (see DecimalFormat API to format the way you want)
      double someNumber = 1234347.657687;
      java.text.DecimalFormat formatter = new java.text.DecimalFormat("#,##0.00;(#,##0.00)");
      System.out.println(formatter.format(someNumber));
}

Two folders pointing to the same document

Hi,
can two KM folders point to the same document?
for e.g.
say I have two users 1) a business person 2) a technical person.
I have two folder structures 1) a technical structure 2) a business structure with each having access to the all the folders structures.
say tech folder structure has a folder called ep and business folder structure has a folder called client1. The technical person uploads a document of client1 project that is related to ep in the ep folder that is part of the technical strucure.
How do I make it possible to access the document in both the folders(ep and client1)? I don't want redundant documents as it can cause the changes not to get reflected.

Hi,
You can do that using taxonomies. You upload the document, assign metadata and then by mean TREX index is classified.
You create KM Navigation Iviews to point these taxonomies folders.
You can read about taxonomies: http://help.sap.com/saphelp_nw04s/helpdata/en/6c/5145b1d1de11d6b2cc00508b6b8b11/frameset.htm
Patricio.

Two 9IAS pointing to the same orgin database !!

Hello Guys,
I need to setup such way that
two 9IAS machines will be pointing to
the same origin machine (i.e third m/c) !!!
By doubt is what are products we need to install in the second machine !!!
Let us say in the first machine, I install the following products
Oracle9ias database cache
oracle 9ias forms and reports services
oracle http server in non-ssl mode
oracle 9ias web cache
oracle 9ias portal
oracle 9ias discoverer
oracle management server
Let me guess, what should be install in second machine
Oracle9ias database cache - yes
oracle 9ias forms and reports services - yes
oracle http server in non-ssl mode - yes
oracle 9ias web cache - yes
oracle 9ias portal - no
oracle 9ias discoverer - yes
oracle management server - yes
Please let me know whether my jugement is right or not !!!
I am only scared whether the original products(i.e first machine) will
get updated !!!
Thanks for your time !!!
A.Kishore
null

kishore, I don't see any problem installing iAS on two different machines, if that's what you mean. Whatever you install on the 'second' machine will not affect the first. Since they have the different oraInventory location.

Reading two data points at a time in Excel

I would like some help on a programming issue:
I know how to read whole excel data sets but how do you read two points at a time? I would like to extract a number from row 1 column 1 and row 1 column 2. I will use these numbers simultaneously as for loop counters. Then the program should read row 2 column 1 and row 2 column 2. This pattern should continue (number of times unknown) until the two numbers both equal 0.
Please help me with any suggestions you have.
Thanks ahead of time!

Hi mtcellar65
1. you know how to read the whole excel data - just read the 2D Array (whole information)
2. extract the single elements using 'Index Array' Function.
the index for row and column can be kept in a shift register.
3. increment the indices and repeat step 2 again
hope this helps
Renn
Kudos always welcome for helpful posts

Straight line between two polar points

Hi all,
I've created a VI which would be plotting a polar curve depending on the time-distance formula. The VI has Present Mag. and Target Mag. each having its own angle (Polar form i.e. (r,theta)). I want to plot a straight line between the Present point and the Target point. I used the time-distance formula to plot the magnitude, and used the same slope for plotting angle. However, I get a curved plot as shown in the attachment.
Could anyone tell me what formula can be used to plot a straight line between the Present point and the Target point?
Thanks.
-FraggerFox!
Certified LabVIEW Architect, Certified TestStand Developer
"What you think today is what you live tomorrow"
Solved!
Go to Solution.
Attachments:
Temp.JPG ‏38 KB

@altenbach....
how can we do that?
To say in short,
I have two points A(magnitude1,phase1[deg]) and B(magnitude2,phase2[deg]) on the input side. Also, I have the Time input to travel from pt.A to pt.B
I have one polar plot as indicator output.
I need to show on the polar plot a line which is gradually increasing from pt.A to pt.B in a straight line on the polar plot.
You may refer the picture attached in the first post above to get an idea of what I am trying to do.
Thanks!
Message Edited by Fragger Fox on 01-13-2010 11:01 AM
-FraggerFox!
Certified LabVIEW Architect, Certified TestStand Developer
"What you think today is what you live tomorrow"

Two Negative points in ICS

Similar Messages

Maybe you are looking for