Two new problems with the Quicktime Plug-in

I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
There is just nothing on the spot where the embedded Quicktime player should be.
Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
to the Quicktime Plug-in.
Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
I think these might be the problems with the new Quicktime Plug-in 7.7.1.
Please check about these problems and solve them on the next version of the Quicktime Plug-in.
I will give you a couple of hyperlinks so that you can check about the problems directly.
http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
http://blog.daum.net/wellabc/15434322
↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
p.s: I am sorry that I am Korean.

I recommend that you repeat all this via
http://www.apple.com/feedback/quicktime.html
to make sure that Apple will see it.

Similar Messages

  • Anyone else have a problem with the charging plug catching on the aluminum backplate?

    Relatively new Ipad - after charging the unit, disconnected the charging plug and it caught on the backplate.  Anyone else have this problem?

    This problem arose today.  When I removed the plug, the plug pulled on the Ipad2, specifically the thin aluminum strip between the plug's receptical and the Ipad2's front.  No functional damage...the unit still works and charges, but now that thin aluminum strip is displaced.  The plug itself appears to be the culprit.  Looking at the plug that connects to the Ipad2 (the side with the graphic), there are 2 areas which I presume provides tension when the plug is inserted into the unit.  One of those areas is displaced, and became caught with the thin aluminum strip during the plug's removal.  

  • I always have a problem with the silverlight plug-in crashing when I use Firefox 3.6. What is the solution to this?

    The problem occurs when I try to respond to an email or forward an attachment with an email. I always get a message that "the silverlight plug-in has crashed". I send a crash report or reload the page but it does not solve the problem.

    You can try to disable Out-Of-Process-Plugins for the Silverlight plugin to see if that helps. This may however cause Firefox to crash instead.
    See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

  • I keep having problem with the Adobe plug-in

    Whenever I try to open a PDF file in Firefox, all I get is a black screen, sometimes with the blue bar across the middle. I tried reinstalling Adobe, which worked for one or two files. Then it stopped working correct, again!

    I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
    Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
    Please, somebody, HELP.

  • New problem with the new OS on Curve- ANGRY USER!

    Now on my Curve since downloading the new required O.S. (see my previous post about Sound profiles and the blackberry freezing) it won't connect to a few of my applications!  These include my Opera Browser and my mobile banking. Now even Facebook is messing up.  It just keeps saying it can't connect to the internet or find a connection.
    WHEN WILL THIS ALL STOP BLACKBERRY!  WHERE IS OUR FIX!  THIS IS TERRIBLE AND MAKING ME THINK ABOUT GOING WITH ANOTHER PHONE WHEN I BUY AGAIN!  UNACCEPTABLE!!!!!!  Oh, and I can't contact you directly.  I have to pay.  HORRIBLE CUSTOMER SERVICE!

    MarcMe wrote:
    Now on my Curve since downloading the new required O.S. (see my previous post about Sound profiles
    Have you tried the fix described user "steppish" in the other thread where you posted about the sound issue?
    http://supportforums.blackberry.com/t5/BlackBerry-​Curve-BlackBerry-8500/8520-Sound-profile-problem-a​...
    You never posted your results.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem with the data plug-in ATF

    Hello everybody,
    I am trying to load the attached file with Diadem. Normally, it should open thanks to the plug-in ATFX. However, Diadem manages to load it, but when I go through the channels, they all are empty (NO VALUE). One of my collegue tryed to open it and for him it works... I don't understand what happens. Couls you help me please? Thank you.
    Attachments:
    test03_1_101.ATF.zip ‏58 KB

    Hi ernoult,
    It looks to me like this ATFX file contains the data model and all meta-data (attributes) but references most of the channel (measruement_quantity) values in external files.  My guess is that there are other files on your colleague's computer that start with "test03_1_101" but end with something other than ".atfx".  You need to copy those files to the same folder on your computer that contains the "test03_1_101.atfx" file.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Is anyone having a problem with the power plugs?

    My power plugs are getting shorts to where they will not charge up the laptop any longer. I had this laptop 2 years and been through 3 cords already. Sometimes they get really hot too

    what country are you in?
    youre blowing capacitors on the charger block board.  
    Use the included extension cord that came with your Macbook Air to ground your system better.

  • I have a problem with the QuickTime controles

    Hi,
    When I play the WWDC 09 video, and go to full screen mode it would not give me the video controls. However, when I am in normal mode it will give me the controls. I repaired QuickTime and the same thing happens; also, I even uninstalled from my PC and reinstalled it, same thing happens. What could be the causing this problem?

    One export will not serve all those purposes. You export to QuickTime Movie to take the master file to your DVD authoring application. You use JES Deinterlacer on the exported file for high quality computer playback without interlacing. You need to recompress for the web. There options are enormous and you should research this thoroughly.

  • NEW Problem with the IPHONE 4 Camera

    hello
    i bought my new iphone ..when i record a video ,, there's no sound .. but facetime ..calls..and voice memo works fine ,,,
    the restore didn't solve my problem .. is it a hardware issue ??
    because i google the problem and found that many others had the same problem issue when they record a video..
    see this link :
    (( http://forums.macrumors.com/showthread.php?t=948550 ))
    please tell me if there's a solution for this problem ???
    thanks ...

    if a restore didn't work chances are you have to take your phone into a genius bar and get it looked at you will more then likely get a replacement..

  • HEY GUYS ? New problem with the latest lumia 800 ...

    Updated my nokia to the latest os and firmware via zune.
    Now I cant  access my about lumia option to check my os and firmware version
    settings-----> about  ( when i select the about nokia option screen goes black and again the settings screen comes.
    anybody else have this problem? or can anyone help me?
    and also I cant access my wifi option too.. 

    Hi fawaz_ayad,
    Thanks for your post. Did you update through the official path and installed all available updates?
    What you are describing is known to be caused by using an unofficial method of updating using an incomplete update file. 
    If you see this behaviour after the update please contact a Nokia Care Point so they can perform the full update for you.
    Hope this helps,
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • New problem WITH the logic board replacement

    Hi Everyone,
    I sent my computer in recently to get a whirring fan noise repaired, but after receiving my macbook, I have developed the whine.
    They tell me they replaced the logic board, but I didn't even ask for one. Now I have a loud whine coming from the left side of my computer near the adaptor.
    I guess my question is, is it possible to develop the whine after the logic board has been replaced and why Apple replaced a logic board which had no whine.
    Thanks for the help.

    You will not be able to order a logic board from Apple.  You can look at websites such as iFixit.com and Powerbookmedic.com where Apple MBP parts are available.  Costs will be shown there.  In additions there are instructions available if you prepared to install it yourself.
    Ciao.

  • Problems with the Blackberry enhanced Gmail plug-in

    Hi.
    I use my Curve 8900 with a BES email account and added to this today a second Gmail account with support of the Blackberry enhanced Gmail plug-in.
    But this works not fine, I can not see the sent messages in the Gmail conversations, they simply disapeare after they have been sent (and they have been sent really). The same is with the sent message flag - if I filter this flag, I see no messages, but in the reality they are there. If I look in the sent message folder in my Gmail account from the computer, I see all the sent messages.
    Does anybody else have the some experience with the Gmail enhanced plug-in?
    Please, help me.
    Thanks a lot
    Robert

    I have problems with the gmail plug-in as well.  I have a bb 9700 bold and very often my gmail emails don't arrive in the email inbox.  They do arrive in the message box (the one that has everything including phone calls, sms, etc.) but the icon that is just reserved for my gmail emails do not receive them correctly.  Nobody is able to help me to figure out what is causing this; neither blackberry support or my telephone service provider.  Also sometimes once I read a mail, it vanishes from the inbox as well.  very strange...

  • Two display problems with my new MacPro! :/

    I recently bought a new MacPro to replace my PowerPC, and am having some odd video problems I did not have with the old computer (yes, using same display). Here's some quick stats I think are important.
    1. 30 inch Apple HD display (used on both computers.)
    2. Old video card = Radeon X1900 - NEW video card = Geforce 8800 GT (came factory installed)
    3. Old OS = 10.4.11 Tiger New OS = Leopard (with all current updates. Also factory installed)
    4. Quicktime Pro on both systems fully updated
    5. Both Machines had all updates installed at the time of this problem (which is since i got the new machine)
    Here's the two problems...(btw NEITHER of these happen when the display is hooked up to the old computer. only the new MacPro with a different video card and OS)
    1.) When I play back video (sometimes in FCP (all types of files), sometimes in QT (.mov), and sometimes even on youtube and vimeo (so those are .flv files!) only SOMETIMES do I get these odd vertical refresh-looking lines. It makes the video somewhat flicker and you can see them crawl upwards kind of. The odd thing tho, is if I play that art of the video over and over, at times it will happen, and at other times it will not. same file, same part. I also noticed it does NOT stay on the file when exported from FCP and burned to DVD, so I'm thinking it is purely playback.
    2.) Some files when played back in quicktime will get extremely choppy. (Locally played files). I will then click the desktop to make finder the front most selected program...and the files will then play smooth. if I select the QT window again, it will get choppy and flicker again.
    I feel like I have a refresh rate problem, or maybe even a driver problem. The thing is, of course the drivers are not updated outside of auto updates, and I have installed everything available there.
    When I open up my display settings, the refresh rate box is grayed out...so changing the rate isn't possible. Also, with my old computer/video card, I had an ATI control panel...the geforce does not have one...only the build in OSX display control panel.
    Has anyone heard of this? I have posted in a few different places, and have received absolutely no replies. It's really frustrating, and sitting on the phone for hours with apple support to have them say "never heard of that problem" or have me lug the **** thing into a apple store and be without my computer and unable to work doesn't sound fun either.
    it's not stopping me from doing anything..it's just annoying and frustrating cause I can't make it stop. I'm thinking it might be a problem with the leopard drivers that hasn't been addressed yet? I dunno.
    Any suggestions?
    thanks in advance,
    Damion

    UPDATE ::
    In reading an old solution on how to get rid of the dancing pixels I get every once in a long while on this display, I downloaded SwitchResX and am using the demo to test and see if switching the refresh rate to 58khz will help in the line problem...and lo and behold...it kinda does. it is now only noticeable on fast moving action when put into full screen mode.
    The QT flicker problem has NOT gone away...but I'm expecting that the horizontal lines running vertical are a refresh rate problem as I had thought.
    My question, anyone know if apple is aware/working on this?
    Also, why is the refresh rate not changeable with the 20 inch HD display settings in the display control panel??
    I'd much rather use OSX to control my display than a 3rd party application! :/

  • I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message  saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)"   more........ .

    Would someone be able to explain to me the following issue with Iphoto?
    I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
    "Unable to to assemble  calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
    How can  I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
    Thank you for your help.   

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

Maybe you are looking for