Two new superdrive and the doors hitting interior and not opening!
hello all. i just installed two seperate superdrives (dvr 111 & nec 3550) and the doors will not open because they are hitting the interior of the g4. why? i have put all items back and all screws lined up. any help would be appreciated. thanks. also, since having a new additional drive. how does the one eject key on keyboard work for both?
You have to take off the drive tray's attached front bezel on both your Superdrives for the tray to fully open and pop through the doors of your PowerMac G4.
To open your main drive (which is your top drive Press the "eject"key
To open your second drive (which is your bottom drive, press "eject" key and the "option" key simultaneously.
Or you could add an eject icon on the menubar by going into System prefs and "keyboard & mouse" in the keyboard section and check the box for the eject menubar item.
Similar Messages
-
For the last 10 days I have been unable to open the Mail account on my eMac (MacOS10.4.11). When I click on the icon in the Dock the only option I get is "Force quit" and the main Mail bar will not open any choice. Any ideas?
You can setup Mail for iCloud on the eMac.
Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password -
Trying to set up new software.. get to the terms and conditons screen , hit agree and not happens
Do you have your Apple ID in Settings > iTunes & App Store > Apple ID: ?
-
I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....not really sure what happened, but i didnt do anything different from my daily stuff
just an update....when i hit the right command key it respond normal (cmd v cmd c...etc) but when i hit the left command key it shows the x and two commands pressed as well as it delete what i'm working on i.e like backspace but takes out everything at once
thank youHi Moe,
Sounds mostly likje a bad KB, do you have another to test with?
Or...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again.
This computer was brand new in June. Is it the humidity??? What can I do. Please help!!!!No guarantess but try smc and pram resets,
-
Two new problems with the Quicktime Plug-in
I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
There is just nothing on the spot where the embedded Quicktime player should be.
Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
to the Quicktime Plug-in.
Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
I think these might be the problems with the new Quicktime Plug-in 7.7.1.
Please check about these problems and solve them on the next version of the Quicktime Plug-in.
I will give you a couple of hyperlinks so that you can check about the problems directly.
http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
http://blog.daum.net/wellabc/15434322
↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
p.s: I am sorry that I am Korean.I recommend that you repeat all this via
http://www.apple.com/feedback/quicktime.html
to make sure that Apple will see it. -
have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?
Because ratings don't travel with the files or the playlist.
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2 -
Whats better for my mbp 2013 retina in the long run? Keep it plugged in as much as possible or letting the battery hit 10% and then recharge it?
Odd you ask that, since both are HORRIBLE, ... especially often draining your battery low.
General consideration of your MacBook battery
Contrary to popular myths about notebook batteries, there is protection circuitry in your Macbook and therefore you cannot ‘overcharge’ your notebook when plugged in and already fully charged.
However if you do not plan on using your notebook for several hours, turn it off (plugged in or otherwise), since you do not want your Macbook ‘both always plugged in and in sleep mode’.
A lot of battery experts call the use of Lithium-Ion cells the "80% Rule", meaning use 80% of the full charge or so, then recharge them for longer overall life. The only quantified damage done in the use of Lithium Ion batteries are instances where the internal notebook battery is “often drained very low”, this is bad general use of your notebook battery.
A person who has, for example, 300 charge cycles on their battery and is recharging at say 40% remaining of a 100% charge has a better battery condition state than, say, another person who has 300 charge cycles on their battery and is recharging at say 10-15% remaining on a 100% charge. DoD (depth of discharge) is much more important on the wear and tear on your Macbook’s battery than the count of charge cycles. There is no set “mile” or wear from a charge cycle in specific. Frequent high depth of discharge rates (draining the battery very low) on a Lithium battery will hasten the lowering of maximum battery capacity.
All batteries in any device are a consumable meant to be replaced eventually after much time, even under perfect use conditions.
If the massive amount of data that exists on lithium batteries were to be condensed into a simplex, helpful, and memorable bit of information it would be:
1. While realistically a bit impractical during normal everyday use, a lithium battery's longevity and its chemistry's health is most happy swinging back and forth between 20% and 85% charge roughly.
2. Do not purposefully drain your battery very low (10% and less), and do not keep them charged often or always high (100%).
3. Lithium batteries do not like the following:
A: Deep discharges, as meaning roughly 10% or less on a frequent basis.
B: Rapid discharges as referring to energy intensive gaming on battery on a frequent basis (in which case while gaming, if possible, do same on power rather than battery). This is a minor consideration.
C: Constant inflation, as meaning always or most often on charge, and certainly not both in sleep mode and on charge always or often.
From Apple on batteries:
http://www.apple.com/batteries/notebooks.html
http://support.apple.com/kb/HT1446
"Apple does not recommend leaving your portable plugged in all the time."
Keep it plugged in when near a socket so you keep the charging cycles down on your LiPo (lithium polymer) cells / battery, but not plugged in all the time. When not being used for several hours, turn it off.
DoD (depth of discharge) is far more important on the wear and tear on your Macbook battery than any mere charge cycle count. *There is no set “mile” or wear from a charge cycle in general OR in specific. As such, contrary to popular conception, counting cycles is not conclusive whatsoever, rather the amount of deep DoD on an averaged scale of its use and charging conditions.
(as a very rough analogy would be 20,000 hard miles put on a car vs. 80,000 good miles being something similar)
*Contrary to some myths out there, there is protection circuitry in your Macbook and therefore you cannot overcharge it when plugged in and already fully charged
*However if you don’t plan on using it for a few hours, turn it OFF (plugged in or otherwise) ..*You don’t want your Macbook both always plugged in AND in sleep mode (When portable devices are charging and in the on or sleep position, the current that is drawn through the device is called the parasitic load and will alter the dynamics of charge cycle. Battery manufacturers advise against parasitic loading because it induces mini-cycles.)
Keeping batteries connected to a charger ensures that periodic "top-ups" do very minor but continuous damage to individual cells, hence Apples recommendation above: “Apple does not recommend leaving your portable plugged in all the time”, …this is because “Li-ion degrades fastest at high state-of-charge”.
This is also the same reason new Apple notebooks are packaged with 50% charges and not 100%.
Contrary to what some might say, Lithium batteries have an "ideal" break in period. First ten cycles or so, don't discharge down past 40% of the battery's capacity. Same way you don’t take a new car out and speed and rev the engine hard first 100 or so miles.
Proper treatment is still important. Just because LiPo batteries don’t need conditioning in general, does NOT mean they dont have an ideal use / recharge environment. Anything can be abused even if it doesn’t need conditioning.
Storing your MacBook
If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
Considerations:
Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
Ultimately counting charge cycles is of little importance. Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery.
Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
In a lithium battery, deep discharges alter the chemistry of the anode to take up lithium ions and slowly damages the batteries capacity for the cathode to transport lithium ions to the anode when charging, thereby reducing max charge levels in mAh. In short, radical swings of power to lithium cells disrupts the chemical ecosystem of the battery to hold charges correctly which likewise impedes the perfect transfer of lithium ions both in charging and discharging. In charging your lithium battery, lithium ions are “pushed uphill” (hard) to the anode, and discharged “downhill” (easy) to the cathode when on battery power. Deep discharges, damages this “upward” electrolyte chemistry for the battery to maintain a healthy charge and discharge balance relative to its age and cycles.
Optimally, in terms of a healthy lithium battery and its condition, it is most happy at 50% between extremes, which is why low-power-drain processors such as the Haswell are ideal on lithium battery health since a partially charged battery with a low-drain processor has, in general, much more usage in hours
Battery calibration, battery memory, battery overcharging, battery training, …all these concepts are mostly holdovers from much older battery technology, and on older Apple portable Macbooks ranging from early nicads, NiMh and otherwise; and these practices do not apply to your lithium battery and its smart controllers.
Calibrating the battery on older Apple portable Macbooks with removable batteries.
http://support.apple.com/kb/PH14087
There is no calibration of current Apple portable Macbooks with built-in batteries.
http://support.apple.com/kb/ht1490
There is no battery calibration with current Apple portable Macbooks with built-in batteries. Lithium batteries have essentially a 0-‘memory’, and all such calibration involve the estimations fed to the system controller on the SOC (state of charge) of the battery over long periods of time as the battery degrades. The software based battery controller knows the battery's characteristics, or SOC and adjusts itself. This is why there is both no need and purpose to periodically deeply drain your macbook battery, since it doesn’t affect the characteristics of the battery, and further still deep discharges are something you should not do on purpose to any lithium battery.
From BASF: How Lithium Batteries work
https://www.youtube.com/watch?v=2PjyJhe7Q1g
Peace -
In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
ThanksHi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad. Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. Now we have two identical iPads looking like mine. Everything on her ipad seems gone and replaced with mine, all her recent holiday photos, emails, settings, etc etc seem gone.
I'm toast!
Help!!
LJHow to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
Cheers, Tom -
i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?
It is not possible to merge Apple IDs.
-
I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?
Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.
-
How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?
Thanks xYou can upgrade to iPhoto '11 with OS X 10.8.5 by purchasing an iPhoto '11 DVD from Amazon, eBay or other source - or you can upgrade your OS to Mavericks for free if your system meets the requirements and then purchase the upgrade to iPhoto '11 version 9.5.x from the App store - in either case backup first in case of problems
LN -
How do I transfer all photos and music from my old iphone 3gs to new iphone 4s? I have a new laptop because the old one broke and so do not have non camera roll photos or music stored anywhere apart from the iphone 3gs and cannot update io5 on the iphone 3gs without erasibng everything. i need help!!!
Syncing to a new iTunes library or computer will erase your phone. Only if you back up manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved:iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device -
I tried to ru nthe new update on my phone and the screen is blank and wont reset the only thing that comes up is the itunes logo and a picture of the charger beneath that how do i fix this so my phone will turn on, this has happened twice before
Hello, djernigan.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeledGet more help in the second article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
Cheers,
Jason H.
Maybe you are looking for
-
I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you
-
Administrator unlock for officejet 6700
I cannot setup wireless printing as the features are locked. I tried a fix I saw on this forum and it failed. When I scrolled to the restore network defaults it was locked. Is there a different fix for this?
-
CN43N: No objects were selected using the criteria
Hi; recently i have loaded WBS into system through a BDC programme. When i check those WBS in Project Builder i can see them, on other hand when i execute CN43N it does not show me any record. Your valuable input is required. Thank you.
-
SQL 2012 Enterprise SP1 installation for SCCM 2012 R2
I am just starting to install SQL 2012 with SP1 Enterprise for SCCM 2012 R2. Does anyone have a step by step guide for this install please I am planning to install SQL 2012 with SP1 Enterprise as a physical install which I intend to geo cluster later
-
Garageband POP and LOSS OF SOUND when scrolling through synth sounds fast
Hey All Ive been getting into Garageband 09 recently, but when I'm playing a track Ive written and scrolling through different synth sounds quickly (to select a new sound on the fly)the speakers sometimes make a POP sound, and then no sound comes out