Two operating systems, one library

I'm using iTunes 7.0.2.16 on Windows XP Pro with no problems. I just installed a dual-boot of Windows Vista RC2 for fun, and installed iTunes within Vista as well (in a separate "Program Files" folder, of course) but I can't access the XP iTunes library from the Vista installation of iTunes. I've tried the Shift-key library selection process while starting iTunes, and the library file opens, but there's nothing in it.
After trying this initially in Vista, I went back and confirmed that I can still access the library just fine in XP. The XP library files are not (yet) being overwritten from Vista.
The XP iTunes settings point to D:\Music for its library which consequently means the library files are in D:\Music\iTunes. I've set the Vista iTunes to the same path (D:\Music), and told it to open the "iTunes Library.itl" file manually, but as before I see a blank library.
I don't want to export/import the library from XP to Vista as I want to keep everything in its original XP location - ideally I'd like to be able to access the same library from either OS no matter which one I've booted into.
Any help would be appreciated! Thanks!
  Windows XP Pro  

This is difficult to do because one, iTunes isn't capable with Vista yet, even if you enable the "Xp Compatibility mode" (it will only work some of the time!), two, your having two different OS's and iTunes editing one file and so even if you get it to work there might be some corruption.
First, I would change the iTunes Folder in settings (on both XP and Vista) to the folder (normally "iTunes Music")(my settings point to "C:\Documents and Settings\mjd\My Documents\My Music\iTunes\iTunes Music") with all of the artist's folders in it. iTunes will automatically recognize the iTunes library files and attempt to import them.
If that doesn't work I would try copying your initial (XP) iTunes folder to a new place and then trying iTunes within Vista. If the files show up then you know that it isn't a compatibility problem.
Then, if it works, delete that copied folder, THEN delete all of the songs in iTunes (on Vista) and then point iTunes to the old folder and then see if it works.
If the copied folder still shows up as blank then try uninstalling iTunes in Vista and then reinstalling it. IF that doesn't fix the problem, then you will have to wait till Apple makes a Vista compatible iTunes.

Similar Messages

  • Two hard drives, two operating systems, one MacBook Pro

    Dear community,
         I have a MacBook Pro (mid-2010) with Mac OS Lion. I plan on having this computer all through the rest of college (another two and a half years, hopefully) so I want to upgrade it just a bit. What I would like to do is take out my optical drive, install a second hard drive mount, and put an SSD in that spot. Now, this would be pretty simple if it were just Mac OS Lion that I wanted on it, but here's the catch - I'd like to put my copy of Windows 7 on that drive as well. I currently use one hard drive for Mac/Windows 7 using boot camp, so I figured it'd be possible to do this with 2 hard drives.
         Basically I'd like to put the OSes and a few programs on the SSD, and the files/remaining programs on my big HDD. Is this even possible? Any suggestions?
         In summary: Mac OS Lion and Windows 7 + a few Mac/Windows apps on the SSD; Mac OS and Windows data files and programs on the HDD. Can it be done?
    Thanks a lot.
    -Grant
    *Note- here is the hard drive caddy I'm looking at: http://www.amazon.com/Drive-Unibody-MacBook-SuperDrive-Replacement/dp/B0058AH2US /ref=wl_it_dp_o_npd?ie=UTF8&coliid=I1MJCRJMNCU4QQ&colid=1LV4HAU48M27X

    grantmcconnaughey wrote:
    Dear community,
         I have a MacBook Pro (mid-2010) with Mac OS Lion. I plan on having this computer all through the rest of college (another two and a half years, hopefully) so I want to upgrade it just a bit. What I would like to do is take out my optical drive, install a second hard drive mount, and put an SSD in that spot. Now, this would be pretty simple if it were just Mac OS Lion that I wanted on it, but here's the catch - I'd like to put my copy of Windows 7 on that drive as well. I currently use one hard drive for Mac/Windows 7 using boot camp, so I figured it'd be possible to do this with 2 hard drives.
         Basically I'd like to put the OSes and a few programs on the SSD, and the files/remaining programs on my big HDD. Is this even possible? Any suggestions?
    The SSD should be the boot drive in the present hard drive spot for these reasons.
    1: You want the SSD as the boot volume for speed of OS X, Windows and applications (must be on boot drive along with one bare bones user, each OS)
    2: You want to inflict as little change to the SSD as possible to make it last longer as they can wear out with a lot of use, thus a boot/app drive is ideal for this.
    3: Present hard drive becomes the exFAT formatted drive to use for Windows or Mac file storage use in the optical bay caddy.
    Problems:
    You can't install Windows from a external optical drive, only the internal one.
    You also won't be able to boot off a 10.6 install disk just the same.
    However you can option boot off 10.6/10.7 previously installed, or cloned (Carbon Copy Cloner), on a external drive.
    Windows in Bootcamp is subject to the same problems requiring reinstall like it is on PC's, which to reinstall would require you to install your internal optical drive each time.
    You can't make a bootable clone of Windows on a external drive and use it (because of validation issues with the drive Windows is installed on) or use it to restore Bootcamp (there used to be software that did this for Snow Leopard, but it hasn't been updated anymore)
    Also if your 2010 MBP doesn't have SATA 6, your going to be using SATA 3 and not the full speed capability of the SSD.
    What you might consider doing instead is getting a 1TB 7,200 RPM boot drive, you get storage size to partition and decent speed, without excessive speed which you might not be able to use it all with your hardware.
    Another option, if your using Windows for non-hardware presisng issues (3D games, heavy CPU loads) is to use virtual machine software (VMFusion, Parrallels Desktop etc) and run Windows in a window on OS X.  This gives the advantage of Windows running as a file, and you can have earlier "snapshots" in case Windows gets hosed like it does sometimes.
    Also Bootcamp restricts you to Windows 7, with virtual machine software you can run any Windows version, even cool Linux distros too (install older versions first then upgrade) Plus you don't have to dual boot or worry about file formatting issues, which both is a pain in the butt.
    Lion is a pain to reinstall on a new hard drive directly with older hardware (two steps involved), luckily you've got a older machine and can install 10.6.8 first, then upgrade by holding option key and clicking on Purchases, then apps, then files, then bootcamp or virtual machine software, then Windows.
    Should make a copy of that 10.6 disk
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    So anyway, that's a loadful to think about.
    What you should do is join the MacOwnersSupportGroup and ask Bmer how best to go about installing the optical drive kit. I've send all these sort of hardware hacks his way as he has done it himself so he knows.
    Apple obviously doesn't support such a thing and nearly none here can offer any support in such a thing.
    OtherWorld Computing has a kit as well, gives a enclosure for the Superdrive to use as a external optical drive as well. (just can't boot or install Windows with it.)
    As always this is all I know and subjective to change, so ask around further and perhaps you'll find more answers, but likely not here.
    See this for fast SSD choices
    http://www.harddrivebenchmark.net/high_end_drives.html
    Good Luck and hope that helps.

  • Two operating systems in one computer - Running a program

    Hi.
    I have just installed two operating systems in my Thinkpad: windows 8 and windows 7. Is that possible to run a program, say Photoshop, MS Office, installed in windows 8 OS while I am running windows 7? I do not want to reinstall all the programs in windows 8 when using windows 7 because they are still in the same computer.
    I tried to clicked on a program (from W8 Program x86). It asks for serial keys. I entered but it said that i do not have sufficient priviledge???
    One more question:
    I have an external hard drive. Is that possible when I install a program on that external hard drive, instead of internal hard drive, and run from that external hard drive? I mean: I install a program on external hard drive, then run that program in external HD from other computer?
    I hope to have your insight solutions for this problem.
    Thank you
    Solved!
    Go to Solution.

    Basically all more advanced programs cannot be run this way. They utilize registry entries, app data, environment variables etc. hence are tied to the OS they are installed on. 
    Some simple applications, which don't require to be installed or have a portable version will work. This list does not include Office or Photoshop.
    The answer for the external hard drive is the same. You'll need a "portable" application, which doesn't store any OS or user specific information.
    You can look here http://portableapps.com/ for applications that are not tied to an OS.

  • Having Two Operating Systems on the same computer.

    Is it possible to have two operating system on one computer?
    I would like to have both Mac OSX 10.411 and Mac OSX 10.5 on my Power Mac G4.
    I would like to be able to access each system independently. So that I may use my
    editing software which is 10.411 compatible but not compatible with 10.5. Is this possible?
    Thanks!

    Welcome To  Discussions stevevideo1!
    Yes if you Partition The Hard Drive.
    ali b

  • Two operating systems on X61s

    Can I install WinXP on a pre-installed Vsta Basic X61s? Any experience in having two operating systems on X61s?
    Please give me some thoughts on this, thanks.

    Here's the link to Apple's free Boot Camp, if you want to download and try that out:
    http://www.apple.com/macosx/bootcamp/
    You'll then need a copy of MS Windows to install.
    Hope that helps

  • Two operating systems with mountain lion

    Is it possible to install two operating systems on a mac running OS X Mountain Lion?
    I would like to setup Snow Leopard and keep Mountain Lion on seperate partitions.
    Can this work?

    As long as your Mac shipped with SL or less you can do it. You'll need to put SL on another drive or partition your existing hard drive. I prefer a seperate drive. Then when you need SL just boot from your SL drive.

  • Two Operating Systems on One Mac

    The Avid software is really finicky (more so than fcp) about what OS you're running with it. We have the opportunity to get the avid media composer software version for real cheap (relatively), but I hesitate because it will mean that I can't upgrade my OS when I want to, without running the risk of breaking Avid or having to shell out more cash to get Avid running again.
    So, is it possible to have 2 different operating systems on one mac? So, for the Avid system, I'll just have the perfect OS for that version of Avid (currently OS 10.4.9), and basically nothing else except necessary software for editing. And for the 2nd system, I'd have FCP and whatever OS works best for that? Would I need 2 physical internal hard drives for that work, and then just set my startup disk as needed, depending on which editing software I want to use?
    massachi

    Here's the link to Apple's free Boot Camp, if you want to download and try that out:
    http://www.apple.com/macosx/bootcamp/
    You'll then need a copy of MS Windows to install.
    Hope that helps

  • Install SSD, running macbook pro with two operating system and two hardrive

    I am currently running bootcamp with Window 8 and Mountain Lion. I am about to install a 256gb SSD, replacing the optical drive. The partition on my current setup is 125 gb for window 8 and 125 gb for OSX.  Since this is the first time I am running a computer with two hardrive and two different operating systems, how should I go by installing (software) my SSD. Should I just make one hardrive run window and the other one run OSX. Is it possible to move the OSX partition to the SSD. Should I just install both window and OSX again on the SSD? What are some other options?

    It is possible, use Target Disk Mode How to use and troubleshoot FireWire target disk mode - Apple Support

  • Two BW systems - one partition/server. How do you divide the resources?

    Hi.
    We installed a BW DEV system onto a partition of an IBM p570. Roughly 22 GB RAM allocated and plenty disk. Everything was running smoothely until we decided to install a BW QA system on the same partition. Ever since then, the DEV system has become very unstable and hangs and then crashes on a frequent basis. On inspecting the trace/log files, we can see obvious messages about the system running out of SWAP space and then halting sessions/processes. My understanding of the situation is that, when DEV was installed, it obviously "believed" that the 22 GB of memory was exclusively available to it and, now that QA is trying to run and grab resource, the DEV is somehow complaining that it doesn't have the resource that it believes it SHOULD have (in layman's terms).
    My question is, in order to get BOTH the systems running optimally (i.e. DEV and QA), what parameters do I need to change/force in order for each of the systems to believe that it now only has 11 GB of memory available? I can only think of checking memory-related parms in the config tool (heap memory, etc.), the PHYS_MEM_SIZE and j2ee/phy_mem_size in the instance profile and then one or two Oracle specific parameters around DB_CACHE_SIZE and SHARED_POOL_SIZE. There are, however, lots of other parameters, e.g. em* parameters, that I can see in the active list (TU02) that appear to be memory related, but I don't know if it is necessary to change these values, or whether they are dynamic.
    The two BW systems are ABAP/JAVA combinations (NW2004s) on AIX 5.3 / Oracle 10.2.0.2.
    Thanks in advance!
    Des.

    read SAP note 88416.
    I would leave 1GB for OS and provide 21GB for each instance (including Oracle instances)
    so basicalyl, size each instance as if you would have about 10GB only available.

  • How can I put photos from two iphones in one library?

    I want to use one family Macbook pro for downloading photos from two iphones with separate apple IDs.  In other words, we'd like to have all our photos stored in one library on the Macbook.  Possible, and if so how does one set it up?

    If you use iPhoto on the Macbook you can merge the photos from multiple cameras (iPhones) into one library. The Apple Id is irrelevant for this.

  • T61p Client Security Solutions + Password Manager + Two Operating Systems

    Greetings.
        I am running both XP and VISTA on my T61p.  I use the client security solutions password manager feature for websites and network shares.  Since my model has the biometric scanner instead of entering the user ID and password I just swipe my finger.  The issue is that when I first setup client security solutions it creates some system key that I assume is tied to the security chip hardware.  Once I have it setup and working under one operating system it fails to authenticate me under the other operating system.  It brings up a windows that says, "Verify Identity" / "reason for authentication:  system key recovery"  Why am I not able to use this feature under both operating systems?
    Thanks for your time.
     XSYLUS

    Thanks for the reply.
    I was using an older version of RnR, however, after the attempt to re-install, I upgraded to the latest version.  It still errors out.
    As to your second guess, I was hopefull this was the fix, I had forgotten to go through the registry.  I deleted an empty CSS folder in the Common Files folder.  And found several registry entries which have now been deleted.  I don't believe I missed any.  But unfortunately no luck.  I cleared the chip again as well.
    If it adds any clues, the system update was not working either.  But the language fix posted on the forums resolved it.  If I remember correctly the first time I tried to reinstall CSS it did ask a question/comment about language not matching.  I could be wrong, however, there have been alot of attempts.
    I spoke with tech support on the phone with the only suggestion being a clean restore of the laptop which I would like to avoid.
    Thanks again.

  • Using Acrobat on two operating systems

    I upgraded to Adobe Acrobat XI Pro in April 2013, for my Mac. I have recently installed Windows on my Mac as a second operating system and would like to use Acrobat from Windows as well. Can I re-download, or do I need to do another upgrade? FYI, on Windows I only need to convert Word docs to PDFs.

    if you have creative cloud, you can use use the windows download to install on your windows os.  that will count as your 2nd (of two) installs/activations.

  • Can I use two operative systems running in  my iMac G5?

    A few weeks ago I bought a digital videocamera, Canon MV830i, it's an easy and a cheap cam.
    Well, now I've filmed some stuffs and I want it over to my iMac. I put in the DV-cable, with firewire, into the cam and the computer. Nothing is happening. I try to open up iMovie but it says ther is no videocamera connected. And then I read on the box, which the videocamera were delivered in, and it says that I need to have an earlier operative system than Mac OS X Tiger, 10.4.3, that I have.
    So that i wonder is if I can download or buy an earlier operative system, ex. Panther 10.3, and still have my Tiger operative system in the computer.
    Do you knoe what I'm going to do? Please help me!
    Thank You Max Landegren, Stockholm, Sweden

    And then I read on the box,
    which the videocamera were delivered in, and it says
    that I need to have an earlier operative system than
    Mac OS X Tiger, 10.4.3, that I have.
    Max, it's unlikely the camera requires Panther. The box was probably printed before Tiger was available. If the camera ran in Panther, mostly likely it will run in Tiger too. That's how these things usually work.
    Before going to all the trouble to locate and install Panther, I suggest you try to get your camera to work in Tiger. iMovie Help has some tips about troubleshooting FireWire, as well as Apple's online information for iMovie. Both are available in iMovie's Help menu.
    Karl

  • Is it possible to have two operating systems?

    Can I install Snow Leopard while still having Lion on my Macbook Pro?
    I have some software that will only run on Snow Leopard but my mac came with Lion.  I have a Snow Leopard install disc so was wondering if I could run both operating systems...

    captfred wrote:
    No.  Your MBpro late 2011 was delivered with Lion 10.7.2 (11C74) .
    It won't run Snow Leopard.
    Sorry, I must have spaced that out. It is entirely correct.
    It is best to ensure that all software that you require will run on your new machine before puchasing it. If you depend on software that was abandonned by its authors in 2006 or earlier, then you can't upgrade - ever. I suggest finding a replacement for that software.

  • Two users on one library?

    I want to put my iPhoto library on my Time Capsule, and I want my fiancee and I both to be able to use it. Will this create any problems? What if we both have it open at the same time?

    What do you mean by 'use'?
    As Larry says, iPhoto runs very slowly on a wireless connection.
    There are two ways to share, depending on what you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and move to the other machine. There, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Remember iPhoto must be running on both machines for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
    Quit iPhoto in both accounts
    Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a dmg. Some folks have tried this on a Time Capsule with no luck.
    On each machine in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Regards
    TD

Maybe you are looking for

  • Firefox/Safari were constantly crashing- now have to force-quit all other apps on MBP..

    I really hope someone can help me. I've been having an issue with apps on my MBP crashing for like 9 months and it's getting worse and I'm losing my mind! It started with Firefox. Everything will be going along fine, and then suddenly I'll try to scr

  • Po prices is not updateing from inforecord

    Guru In Po when enter the Material & QTy & Price for that material is appering from info earlear now  the problem is that Price is not picking from the last Po or Inforecord what must be problem. can u help me Thanks Sudhir

  • Small picture inset in the big picture

    Why would the printer print a picture that has part of the picture set in the big picture?  On the page preview it doesn't show up but.  It has happened when printing a PDF and also when printing a bmp. file.  Any ideas? Thanks. Bert

  • Pricing procedure in PR

    Can i call the pricing procedure in Purchase req for the purpose of tax calculation regds shailesh

  • Unable to update DL membership in Exchange 2010

    Hi, We have  multi forest enviroment , User mailbox and DL are created in one Forest A and user logs into  Desktop into Forest B and configure the outlook using forest A username and password. User is the owner of few DL's and able to update the grou