Two parameters in the SMTP Conector , EXHCANGE 2007

Hello,
   I installed a Exchange 2007 several weeks ago. I registered a domain of my own just 5 or 6 days ago too.
   In "the public side" all seems to be running okay because nslookup points to my Public IP when I ask for the mx record (=mail.mydomain.eu).
   I can't send any email outside the organization.
   ISA server does not see any traffic to port 25 when I send an email from my internal OWA to hotmail o gmail.
   Which makes me think it is something related to the connector is ISA Server not seeing any traffic to port 25.
   I am not an expert in Exchange 2007, but I saw these two parameters in the SMTP Connector:
   1- Specify the FQDN this connector will provide in response to HELO or EHLO.
         It is empty, but it is empty because as an attempt to solve this problem, I deleted the SMTP Connector and created a new one from a wizard, and then I see now this field empty.
2- Use consult External DNS configuration in the Hub Transport Server.
       I don't understand what is the difference of this being ticked or not.
I restarted both ISA 2006 Server and Exchange 2007, just in case, because I feel stuck about what to do next, and besides, since I don't fully understand those two parameters, well, maybe the problem is there.
Thanks in advance!
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

Thanks a lot DagDougInc!.
FIRST OF ALL: Now I am able to get to gmail and hotmail, I just removed my smtp connector and created a new one from scratch. And all came to the address space not being set at "*/Cost 1" but at "mydomain.eu/Cost 1". Gosh, since
I am a newcomer, I didn't know better sorry.
The problem now is to receive emails.
1. I am able to reach my email public server, at least its ip, through nslookup:
nslookup
server 8.8.4.4
set type=mx
mydomain.eu
...and this shows up: "Non-Authoritativeresponse : mydomain.eu MX preference = 10, mail exchanger = mail.mydomain.eu"
2. I am also able to reach smtp.gmail.com through telnet, but when "AUTH LOGIN", it says "must issue a STARTTLS command first" , but I guess this is not any issue to take into account.
I have to say that in my 2008 server (where I have Exchange 2007 installed) I have no telnet, nor in one of my LAN clients (Windows 7). I suspect both Windows 2008 and Windows 7 got rid of telnet.
I did it therefore in a 2003 Server which is not inside the LAN (it is outside the LAN and outside the ISA Server) , so, I don't know if it was useful for my problem.
Can I test "telnet mail.mydomain.eu 25" from inside my own router?. My guess is that I can't. Someone explained something about a loop, but I have to dig into it.
3- In my router there is a Virtual server forwarding the smtp traffic to my ISA Server which points to Exchange server in my DMZ, whose traffic is allowed in my firewall, through a Exchange rule (I am used to this, I will check it, but I have done this many
times).
EDITION:
4- ISA Server does not see any smtp traffic when I send an email from gmail to my domain, but it sees smtp traffic when I send emails from my exchange server to gmail. I point this out because in my view, the problem may be outside the ISA, since it does
not see any traffic reaching my network, maybe not even my router.
Again: Thanks a lot !
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

Similar Messages

How to get two parameters in the same line of selection screen?

hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?

hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1.

Migrating to "The Cloud" - "The SMTP address has no mailbox associated with it."

We have a front office app that can receive data from Exchange via EWS Push Notifications. Last week, they moved my mailbox to "The Cloud". Now my mail resources all have "office365.com" in their paths. I'm a very early
adopter, trying to understand how to extend the app to work with this architecture before they move everyone else over.
In the past our app was an EWS 1.1 system talking to Exchange 2007 SP1 servers. That's the ExchangeVersion I've always had set in EWS. Nobody has ever talked to me about upgrading any of our Exchange boxes. Impersonation was
not supported in 2007, so we've been using a dedicated service account with full access to specified mailboxes. At the moment, I'd be happy if I could just connect to my own mailbox with my own credentials.
Our old system has 4 CAS servers. You can reach a mailbox through any of them. For the new mailboxes, we've added two new CAS servers. I'm told these particular servers are Exchange 2010 SP3. I'm also told the cloud mailboxes are in an Exchange
2013 environment.
I've upgraded my EWS library to 2.2. I've tried ExchangeVersion values for 2007 and 2010 SP2 (there is no value for SP3). I'm not using autodiscover; I just put the name of one of the new CAS servers into the code for now.
My SMTP address is [email protected]. Our internal domain is usa.bigcompany.net, and I commonly login to resources (including my workstation) as USA\smith_j. I was using that ID
for Exchange, but since my mailbox got moved I now login to my mailbox as
[email protected]. We were previously building credentials for EWS with username (smith_j), domain (USA) and password. Because of the changes, it seems that the right username to pass should
now be [email protected], along with just the password.
The problem is that no matter what I send, the server returns "The SMTP address has no mailbox associated with it." I've tried a lot of permutations, and for hours that's all I've gotten. Trying to reduce this to the most basic level,
what should I be doing in order to reach my own mailbox in office365.com, using my own account? Is there any trick to this?
BTW, if Microsoft is using Exchange 2013 and my CAS server is 2010 SP3 which ExchangeVersion should I be using to do this?

This is very good. Using the office365.com URL, I have been able to create a subscription. Of course, the office365.com server will not be able to make callbacks through our firewall, but it does clearly show that our CAS server is not getting
the job done. This is progress!
I asked, and was told we're using Exchange 2010 SP 3 on the CAS because we already had licenses for that.
So I'm back to the question of whether this can be done by an on-premises CAS (or a cluster of them), or if we must go through Microsoft's servers to reach the mailboxes.
And again, thank you!

Not able to set the SMTP timeout session on BIPublisherAPI

Any of the below parameters are not taking into effect:
deliveryRequest.addProperty(DeliveryPropertyDefinitions.ASYNC_CHECK_INTERVAL,
"1");
deliveryRequest.addProperty(DeliveryPropertyDefinitions.ASYNC_TIMEOUT,
"1");
deliveryRequest.addProperty(CommonPropertyDefinitions.TIMEOUT,
"1");
Is there any workaround to set the time out on the smtp session using BI publisher java api?

Sorry, what I said was rubbish, because the LSMW and the session run in different external sessions.
I have searched forum for these terms: "company BUK parameter BDC background"
These threads Is it possible to set default company code in SM35? and Release BDC in SM35 in background, How to set defaul company code? seem promising, but I'm not sure they really solve.
In case these threads don't help you, I think you can create your own Z transaction which sets the BUK parameter id and then does a LEAVE TO TRANSACTION 'ABAON'. Then create again the recording on the Z transaction.
If you are using ECC6, then you may also enhance the standard to reset BUK parameter id at the very beginning of ABAON, in case it's run in batch input (sy-binpt = 'X'). Be careful as sometimes SAP does batch input on some transactions, so that could make the standard fail.
Last thing, you can contact SAP support, though it might probably be considered as consulting.

Can I make another website using iWeb,then publish it to a different server through the SMTP panel on iWeb

Can I make another website using iWeb, and then publish it to a different server through the SMTP panel on iWeb, even though I have a website published on mobile me, can I just use the SMTP engine to publish a different site but to a different server, that's the question I'm asking. I'm hoping for a quick reply. Thank you for your time in reading this.

Yes. You can do it one of two ways:
1 - select FTP Server in the Publish To menu (click on the site folder to get to the options) and enter the FTP address, username and password and publish as you would if using MMe.
2 - select Publish to Folder and publish. Use a 3rd party FTP client like Cyberduck to upload the site files to there server using the FTP address, etc.
OT

How to make a common parameter for two subreports in the main report.

Hi,
I have a crystal report which has 2 subreports in it. Both the subreports have the same code and I need to create a parameter for Project Cost in both the subreports for filtering the data.
When i create the same parameter in both the subreports, i see two parameters with same name on my prompt page while refreshing the report. however I just want 1 parameter on my prompt page and data should get filtered in both the reports.
Can anyone please suggest something, How can I do that? is there a way for sharing same parameter between two subreports?
Thanks!
Neha.

hi Neha,
here's how to do this:
1) create a new parameter with the same name on the main report
2) right click on your first subreport and choose Change Subreport Links
3) in the Field to Link To list drag over your new main report parameter
4) open the Subreport Parameter Field to Use select menu and choose your subreport parameter
5) repeat steps for the 2nd subreport
now you'll only get prompted once.
cheers,
jamie

How can i Add two parameters to Account Analysis Report R12?

Please i need to add two parameters Vendor Name & Currency to Account Analysis Report?

Dear Helios
1- I added the two parameters through navigating to concurrent ->Program - > Define
2 - Modifiy XLAAARPT.xml (Adding paramters and modify the query)
is this correct?
Regards,
Edited by: user565050 on Sep 6, 2012 1:17 AM

Passing two variables in the body of the URL using the go to detail page SB in ASP

Hi all,
Would appreciate your assistance with the following, I'm
trying to set up a go to detail page sb that passes two variable in
the body of the URL rather than the standard one.
The code i've tried is -
<td><A HREF="gggggggtest.asp?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"PCL2ID=" + othermenutwo.Fields.Item("PCL2ID").Value
%>&"PCL1ID=" +
othermenutwo.Fields.Item("PCL2PC1ID").Value
%><%=(othermenutwo.Fields.Item("PCL2Description").Value)%></A></td>
Where the PCL1ID and the PCL2ID are the variables
The normal code generated by the go to detail page sb with
one variable is -
<td><a href="ggggggtest.asp?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"PCL2ID=" + othermenutwo.Fields.Item("PCL2ID").Value
%>"><%=(othermenutwo.Fields.Item("PCL2Description").Value)%></a></td>
Unfortunatley my code tweaking isn't working as the second
variable isn't being sent, any help would be gratefully appreciated
Thanks

Instead of using DW's 'go to detail page' option, simply set
up the link the manual way in DW using the Link browser. Select the
file you want to link to and then use the parameters button at the
bottom of the 'Select File' dialogue to set the parameters to be
passed with the link. You can then manually set the name of the
parameter to be passed and then select its value from a recordset.
The key thing is that you can set as many parameters as you like,
so you can set both the parameters you want.
On the detail page you then filter by the parameter name you
chose (or both).
Personally I always code links this way rather than using the
go to detail page option as you get much better control of what is
going on.

0PA_C01 different results from two queries on the same cube ....

HI
Can you please help with this problems ...
i am running a two queries with the same restrictions e.g
Sep 08 for employee 22345 ,
In one report it shows the Pay Scale level as A1 , then in the other report it shows Pay scale Scale level as A2 ,
looking at the master data in 0employee , the first report is right ... this is how the data looks like in 0employee
Employee Valid from      To                Pay scale Level
222345       2007-11-03   2008-09-30     A1
222345       2008-10-01   9999-12-31     A2
Can someone please shed some light on this , im thinking it has something to do with update rule but even that is supposed to use last date of the month , not 1st day of the following month. The Cube is a stndard cube 0PA_C01 and the update rule aswell .....

Hi,
Please check in the cube whether the data for the Employee is getting with two values like shown in your question:
Employee Valid from To Pay scale Level
222345 2007-11-03 2008-09-30 A1
222345 2008-10-01 9999-12-31 A2
and also check whether when the data loaded to the cube.
There may be some change in the report structure where the difference is getting may in the column wise or row wise restriction may present.
Please check on the structure of the report also.
With Regards,
Ravi Kanth

How to pass two parameters in one url?

the tutorial teaches me to use
/faces/Details.jsp?personId=#{currentRow.value['PERSON.PERSONID']}
to pass one parameter.
How can i pass two parameters in one url?
/faces/Details.jsp?personId=#{currentRow.value['PERSON.PERSONID']}&personName=#{currentRow.value['PERSON.PERSONNAME']}
is not right.

The '&' character needs to be escaped, lest it be interpreted by the application server as a separator character in the HTTP query string. Instead of '&', try '%26'.
// Gregory

Is it possible to compare two parameters type dateTime in switch- component

Hello,
i have a synchronouse prozess with one switch component. In the switch component i want to compare to parameters type dateTime. While execute the prozess alwayse the <otherwise>- sector is executed, but never the sector with the condition. But the condition is fulfilled.
Can it be, that a comparison in a switch-component doesn't work while using two parameters with type dateTime?
If it is so, has anybody an idea, how to compare two dateTimes without using the character dateTime?
I'll be very happy about a helpfull advice.
Thanks and regards,
rala

Hi Rala,
this example works perfectly for me.
IMHO doesn't matter how to assign values to dateTime variables.
<scope name="Scope_timeDate">
<variables>
<variable name="aktCas" type="xsd:dateTime"/>
<variable name="casDuration" type="xsd:dateTime"/>
</variables>
<sequence name="Sequence_1">
<assign name="Assign_datesTimes">
<copy>
<from expression="xp20:current-dateTime()"/>
<to variable="aktCas"/>
</copy>
<copy>
<from expression='"2002-05-30T09:00:00"'/>
<to variable="casDuration"/>
</copy>
<copy>
<from expression="'before'"/>
<to variable="rtn"/>
</copy>
</assign>
<switch name="Switch_1">
<case condition="bpws:getVariableData('aktCas') > bpws:getVariableData('casDuration')">
<assign name="Assign_ok">
<copy>
<from expression='"IF"'/>
<to variable="rtn"/>
</copy>
</assign>
</case>
<otherwise>
<assign name="Assign_otherwise">
<copy>
<from expression='"otherwise"'/>
<to variable="rtn"/>
</copy>
</assign>
</otherwise>
</switch>
</sequence>
</scope>
Regards,
Ivan

How to adjust mouse or trackpad parameters for the user selection screen?

This is not critical, but annoying. I can change the mouse or trackpad parameters by user, so anyone can use their own mouse or trackpad adjustment. However I can not locate how to change this parameters for the welcome or user selection screen. In my case I have two users, both of us use the trackpad with the one touch for click function, so no one press physically the trackpad for a click. However, as the default parameter is the touch function deactivated we have to actually click the trackpad in that exclusive screen.
Another example with mouse, normally we use the mouse with almost double of the default acceleration, but when in the user selection screen the mouse assumes default configuration and feels super SLOWWWWWWW.
Again, this is not critical, but would be very nice to be able to modify this parameters in the welcome screen.
Tyrone Carrion

For the login screen, you are not associated with a normal user, but the system defaults...try logging in to the Admn account and change the behavior there...those settings should then apply to the login screen.

Filter Information for two parameters in Query Designer

Hi Gurus !!
I have a problem for filter information for two parameters in Query Designer,
the first parameter correspond a Ejercise-Period, the second parameter correspond
a Compensation Date of document, both parmeters must have date less than or equal to
to the parameter date input for screen (mm.aaaa).
Internally the Report must filter countable information for Countable Date <= Parameter Input and
Compensation Date of document <= Parameter Input.
If i assign two filter parameter in Query Designer, not could realise this.
Exist any simple form to realise this ??
Wait for yours responses.
Thank You.

Hi shanthi bhaskar,
Thanks a lot for your answer.
I have one doubt about it: with this solution that you propoused the user will be able to select the values for plant?.
I mean, the user make the selection of the value for Zone, then he wants to see the in plan´s variable the values that corresponds with this Zone for make a new selection of plan.
What happens if I need this dependency also in another variable like time variable?
Thanks a lot

Passing a portlet parameters on the Query String

Hello,
We have a portal page with a portlet on it and would like to be able to make this portlet dynamic by using additional parameters on the portal url query string.
Back in version 5, I was told that this couldn't be done. Perhaps someone knows whether the G6 portal supports this?

Yes, you can pass portal url into porlet in G6.
1. You have to check box "HostPageURI" (don't remember exactly, but close to this one) on User Information page for Web Service.
2.Use getHostPageURLQueryString() method (for IPortletRequest) to retrive QueryString value;
3. Parse url value manualy to access parameters and values.
But think twice before do this. This is because there are more effective ways to pass data and "make portlet dynamic":
1) Portlet Settings (classic way, total page refresh);
2) Adaptive portlets techology (inline refresh, passing data to other portlets on the same page);
3) Portal Session object (for G6). Way to pass data to portlets placed on different page.
Edited by Bryazgin at 01/18/2007 7:11 PM

What is the best way to run a powershell script with parameters in the Task Scheduler?

Hello,
Want to run the following from a scheduled task in the Task Scheduler on a server. What is the best approach?
.\pscript.ps1 -csvfile "\\Srv1\Share\File.txt"
Thanks for your help! SdeDot

Hi,
To run a powershell script with parameters in the Task Scheduler:
Program: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Add argument (optional): -Command "& c:\scripts\test.ps1 -par1 2 -par2 3"
Hope the below two articles be helpful for you:
Schedule PowerShell Scripts that Require Input Values
https://blogs.technet.com/b/heyscriptingguy/archive/2011/01/12/schedule-powershell-scripts-that-require-input-values.aspx
How to Schedule a PowerShell Script
http://dmitrysotnikov.wordpress.com/2011/02/03/how-to-schedule-a-powershell-script/
Regards,
Yan Li
Regards, Yan Li

Two parameters in the SMTP Conector , EXHCANGE 2007

Similar Messages

Maybe you are looking for