Two parents one child table scenario

We have three source tables like this:
Employee
emp_id(PK)
emp_name
Department
dep_id(PK)
dep_name
Emp_Dept
emp_dept_id(PK)
emp_id
dep_id
We want to use a database sequence to populate the PKs in target.
Problem is after we transfer Employee and Department to the target, how do we populate Emp_Dept in the target with the changed emp_id and dep_id.
Is there any way to keep track of the old PK in source and the corresponding PK in target?
Thanks,
Naresh

We want to transfer the three tables as such to three different tables in the target.
Only catch is we need to use a DB sequence in the target to populate the PKs for the tables.
After populating Employee and Department in the target, their PKs will change since we are using a DB sequence in the target.
Now when transferring Emp_Dept, it should have the new PKs of the Employee and Department as they are present in the target.
Eg:
Source:
Employee
emp_id(PK) :100
emp_name :Calvin
Department
dep_id(PK) : 200
dep_name : Fusion
Emp_Dept
emp_dept_id(PK) : 300
emp_id : 100
dep_id : 200
Target:
Employee
emp_id(PK) :500
emp_name :Calvin
Department
dep_id(PK) : 600
dep_name : Fusion
Emp_Dept
emp_dept_id(PK) : 700
emp_id : 500
dep_id : 600

Similar Messages

Insert data Flatfile table to Parent and child tables

Hi All,
I have Flatfile table which is we getting from daily txt files and i want to populate flatfile data to parent as well as child tables. parent table has primary key as ID. This ID is foreign key of child tables.
Here i have mentioned our process.
1. Flatfile duplicates has to remove with condition of daily date.
2. Before Insert parent table have to check duplicate(we have Unique key of 4 columns in parent) if duplicate is there we have to delete duplicate then Insert into parent table unique records(Primary key is ID).(here why we are delete duplicate record meaning
we getting daily files so if any records updated in future that record should be insert to parent and child table so only we delete old records and insert new records).
3.After insert parent we have to populate child tables from Flatfile table as well as we have to insert parent table primary key as foreign key of child tables.
4. if any truncation error occurs that errors should go to error log table.
Right now we are using cursor for this concept and cursor has performance issue. so we are trying to optimize other way to populate parent and child table to increase performance to populate.
Please help us to which way to do this process increase of performance .
Please can any one reply.

Hi RajVasu,
Since this issue is related to Transact-SQL, I will move this thread to Transact-SQL forum. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to update parent and child tables while updating parent table

I have a parent table EMPLOYEE which includes columns (sysid, serviceno,employeename...) sysid is Primary key, serviceno is Unique key and I have child table DEPENDENT includes columns (sysid,employee_sysid,name,dob...) here again SYSID is primary key for DEPENDENTS table, employee_sysid is Foreign key of EMPLOYEE table.
Now I want to change SYSID (using sequence) in EMPLOYEE table which need to be update in DEPENDENTS table as well
Note: I have 10000 records in EMPLOYEE table as well as I have 5 more child tables which need to update new SYSID.
please help me

first disable the FOREIGN KEY Constraints.
you can update Parent as well as Child record also with help of trigger.
here i am giving you one examlpe..it may help u.
create table parent(id number primary key,name varchar2(100))
create table child_1(id number primary key,p_id number,dob date,
CONSTRAINT FK_id FOREIGN KEY (p_id) REFERENCES parent (ID))
create table child_2(id number primary key,p_id2 number,addr varchar2(1000),
CONSTRAINT FK_id2 FOREIGN KEY (p_id2) REFERENCES parent (ID))
insert some test data to parent and child tables.
alter table child_2 disable constraint FK_id2
alter table child_1 disable constraint FK_id2
CREATE OR REPLACE TRIGGER delete_child
BEFORE UPDATE ON parent
FOR EACH ROW
BEGIN
UPDATE CHILD_1
SET P_ID=:NEW.ID
WHERE P_ID=:OLD.ID;
UPDATE CHILD_2
SET P_ID2 =:NEW.ID
WHERE P_ID2=:OLD.ID;
END;
then Upadte parent table primary key col and check the child tables.
then enable the constraints...

UDO WITH MORE THAN ONE CHILD TABLE

Hello There.
Can I handle more than one child table for a master table by code?
if I can, how do I create this udo, I have tryed the following code, but it takes the last child table ("jobs7")
If oUserObjectMD.GetByKey("Jbs_UO") = 0 Then
            oUserObjectMD.CanCancel = SAPbobsCOM.BoYesNoEnum.tYES
            oUserObjectMD.CanClose = SAPbobsCOM.BoYesNoEnum.tYES
            oUserObjectMD.CanCreateDefaultForm = SAPbobsCOM.BoYesNoEnum.tNO
            'oUserObjectMD.FormColumns
            oUserObjectMD.CanDelete = SAPbobsCOM.BoYesNoEnum.tYES
            oUserObjectMD.CanFind = SAPbobsCOM.BoYesNoEnum.tYES
            oUserObjectMD.FindColumns.ColumnAlias = "Code"
            oUserObjectMD.FindColumns.Add()
            oUserObjectMD.FindColumns.SetCurrentLine(1)
            oUserObjectMD.FindColumns.ColumnAlias = "Name"
            oUserObjectMD.CanLog = SAPbobsCOM.BoYesNoEnum.tNO
            oUserObjectMD.LogTableName = ""
            oUserObjectMD.CanYearTransfer = SAPbobsCOM.BoYesNoEnum.tNO
            oUserObjectMD.ChildTables.TableName = "JOBS1"
            oUserObjectMD.ChildTables.TableName = "JOBS2"
            oUserObjectMD.ChildTables.TableName = "JOBS3"
            oUserObjectMD.ChildTables.TableName = "JOBS4"
            oUserObjectMD.ChildTables.TableName = "JOBS5"
            oUserObjectMD.ChildTables.TableName = "JOBS6"
            oUserObjectMD.ChildTables.TableName = "JOBS7"
            oUserObjectMD.ExtensionName = ""
            oUserObjectMD.ManageSeries = SAPbobsCOM.BoYesNoEnum.tNO
            oUserObjectMD.Code = "Jbs_UO"
            oUserObjectMD.Name = "Jobs UDO"
            oUserObjectMD.ObjectType = SAPbobsCOM.BoUDOObjType.boud_MasterData
            oUserObjectMD.TableName = "JOBS"
            If oUserObjectMD.Add() <> 0 Then
                Dim ErrMsg As String
                Dim ErrCode As Long
                oCompany.GetLastError(ErrCode, ErrMsg)
                MsgBox("Errorf adding UDO master Data" & vbCrLf & ErrMsg)
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserObjectMD)
                oUserObjectMD = Nothing
                Return False
            End If
        End If

Hi Hagai
after oUserObjectMD.ChildTables.TableName = "JOBS1"
just write
oUserObjectMD.ChildTables.Add
that would be
oUserObjectMD.CanYearTransfer = SAPbobsCOM.BoYesNoEnum.tNO
oUserObjectMD.ChildTables.TableName = "JOBS1"
oUserObjectMD.ChildTables.Add
oUserObjectMD.ChildTables.TableName = "JOBS2"
oUserObjectMD.ChildTables.Add
oUserObjectMD.ChildTables.TableName = "JOBS3"
oUserObjectMD.ChildTables.Add
oUserObjectMD.ChildTables.TableName = "JOBS4"
oUserObjectMD.ChildTables.Add
oUserObjectMD.ChildTables.TableName = "JOBS5"
oUserObjectMD.ChildTables.Add
oUserObjectMD.ChildTables.TableName = "JOBS6"
oUserObjectMD.ChildTables.Add
oUserObjectMD.ChildTables.TableName = "JOBS7"

Update column data to Upper Case in parent and child table

Hi ,
I am facing issue while updating column value to upper case in parent table and child table. How can i do that ?
when updating parent row:
ORA-02292: integrity constraint (XXXXXXXXXXXXXX_FK) violated - child record found
When updatng corresponding child row:
ORA-02291: integrity constraint (XXXXXXXXXXXXXXXX_FK) violated - parent key not found
how can i update on both the places ?
Regards,
AA

I am facing issue while updating column value to upper case in parent table and child table. How can i do that ?
Why do you need to do that?
That is just ONE of several questions you should answer before you start modifying your data.
1. What is your 4 digit Oracle version? (result of SELECT * FROM V$VERSION)
2. If both values are the same case what difference does it make what that case is?hen you don't need to alter your original data.
3. What is the source of the column values you are using now? If you change your data to upper case it will no longer be identical to the source data.
4. What is your plan for enforcing future values to be stored in UPPER case? Are you going to use a trigger? Have you written and tested such a trigger to see if it will even work the way you expect?
5. Why aren't you using a surrogate key instead of a 'business' data item? You have just demonstrated one reason why surrogate keys can be useful: their actual value is NOT important.
You should reexamine your problem and architecture and consider other alternatives.
One alternative is to add a new 'surrogate key' column to use as the primary key. Just create a new sequence and use a trigger to populate the new column. Your current plans will require a trigger to perform the case conversion so instead of the just use the trigger to provide the value.
If the change is being done to facilitate searching you could just add a VIRTUAL column UPPER_MY_COLUMN and index that instead. Then you could search on that new virtual column and the data values would still be identical to the original data source.

DB Adapter wizard – WHERE clause on parent and child tables not working.

I have two tables, SECURITY and SECURITY_POSITIONS, where SECURITY has a 1:M relationship with SECURITY_POSITIONS. I used the DB-adapter wizard to create the relationship and the following WHERE clause expression which is looking at both the parent and the child tables;
The expression builder looks like this:
AND
|--- 1. partitionKey EQUAL p_SearchKey
|--- 2. securityType EQUAL “DBT”
|--- 3. securityPositionsCollection.dealReference EQUAL “NA”
The primary key on SECURITY = PARTITION_KEY and SECURITY_REFERENCE
The foreign key from SECURITY_POSITIONS to SECURITY = PARTITION_KEY and SECURITY_REFERENCE
securityType is on SECURITY table (master)
securityPositionsCollection.dealReference is on SECURITY_POSITIONS table (child)
The invoke on the database adapter is selecting a row in securityPositionsCollection for each child row, rather than just those with dealReference = “NA”!
I turned on DEBUG logging in the BPEL console and I can see that there are 2 SELECT queries run (guess this is how Toplink does it!), where the 1st query appears to select the parent rows and the 2nd query selects the child rows.
However the 2nd query is not working because it is failing to select only those child rows where dealReference = “NA”. Also, don’t know why the 2nd SELECT query needs to specify the child SECURITY_POSITIONS table twice in the FROM clause, because that seems to be causing the problem.
1st query executed is as follows;
SELECT DISTINCT t0.PARTITION_KEY, t0.SECURITY_REFERENCE, t0.SECURITY_TYPE
FROM CENTRAL.SECURITY t0, CENTRAL.SECURITY_POSITIONS t1
WHERE ((((t0.PARTITION_KEY = ?) AND (t0.SECURITY_TYPE = ?)) AND (t1.DEAL_REFERENCE = ?)) AND ((t1.SECURITY_REFERENCE = t0.SECURITY_REFERENCE) AND (t1.PARTIT
ION_KEY = t0.PARTITION_KEY)))
bind => [200706200000, DBT, NA]
2nd query executed is as follows, where child table appears twice! ;
SELECT DISTINCT t0.DEAL_REFERENCE, t0.PARTITION_KEY, t0.SECURITY_REFERENCE
FROM CENTRAL.SECURITY_POSITIONS t0,
CENTRAL.SECURITY_POSITIONS t2,
CENTRAL.SECURITY t1
WHERE ((((t0.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND (t0.PARTITION_KEY = t1.PARTITION_KEY)) AND
(((t1.PARTITION_KEY = ?) AND (t1.SECURITY_TYPE = ?)) AND
(t2.DEAL_REFERENCE = ?))) AND
((t2.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND
(t2.PARTITION_KEY = t1.PARTITION_KEY)))
bind => [200706200000, DBT, NA]
Anyone experienced the same problem e.g. why is toplink making the query more complicated that it needs to be, because the query only needs to reference the SECURITY_POSITIONS table once, as follows;
SELECT DISTINCT t0.DEAL_REFERENCE, t0.PARTITION_KEY, t0.SECURITY_REFERENCE
FROM CENTRAL.SECURITY_POSITIONS t0,
CENTRAL.SECURITY t1
WHERE ((((t0.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND (t0.PARTITION_KEY = t1.PARTITION_KEY)) AND
(((t1.PARTITION_KEY = '200706200000') AND (t1.SECURITY_TYPE = 'DBT')) AND
(t0.DEAL_REFERENCE = 'NA'))) AND
((t0.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND
(t0.PARTITION_KEY = t1.PARTITION_KEY)))

Hello,
It looks like you have configured your 1:M relationship to use batch reading. This causes the query to bring in the Security_Position table's objects to use the same selection criteria as was used on the initial query, with a join statement. This is more efficient in most cases as it ensures only the Security_positions needed for the Security objects to be fully built are read, in a single query.
The selection criteria added is only used to filter out the Security objects. All referenced Security_Positions must be read in for the returned Security objects so that the data matches what is in the database. If you do not want the Security_Positions, you might try using indirection on the mapping which will delay the second query until you need the Security_Positions. Or, if you want only the Security_Positions with dealReference EQUAL “NA", you could do a query specifically to filter on them.
Best Regards,
Chris

Update key in parent and child tables

Situation:
Parent table (p) has a PK, p.parent_id. Child table (c) has a FK c.parent_id which, of course, points back to PK, p.parent_id.
I need to UPDATE the key in both tables but I am concerned about throwing a FK constraint violation. How does one get around this? Does one update the child first then the parent or vice versa? Seems either way a FK violation will occur...
thank u.

1) If you ever anticipate wanting to update a key, that key should not be the primary key of a table. Primary keys should be immutable. If this is going to happen with any regularity, you need to re-examine the underlying data model.
2) If the constraints were declared to be deferrable, you would simply mark them as deferred, update both tables, and commit (at which point the constraint would be validated). If the constraints were not declared to be deferrable, you will probably need to end up dropping and re-creating one or the other (presumably as a deferrable constraint this time).
Justin

Delete entries over 1 month old in parent and child tables

Hi guys,
Im new to oracle (2days old) and im struggling to find out how to delete all entries over 1 month old in a database but also delete entries from the child table. I have read about delete cascading etc but im really strugging at the moment. Any tip or ideas? thank you

You just need to delete data in parent table using the right WHERE clause that requires some timestamp column that stores data age. If the foreign key constraint is created with ON DELETE CASCADE child rows are automatically deleted.
Assuming P is the parent table and C the child table and the timestamp column is stored in the parent table here is an example.
SQL> create table p(px int primary key, d date);
Table created.
SQL> create table c(cx int, cy int references p on delete cascade);
Table created.
SQL>
SQL> insert into p values(1, '01/01/2011');
1 row created.
SQL> insert into p values(2, '15/01/2011');
1 row created.
SQL> insert into p values(3, '31/01/2011');
1 row created.
SQL> insert into c values(10,1);
1 row created.
SQL> insert into c values(20,2);
1 row created.
SQL> insert into c values(30,3);
1 row created.
SQL> commit;
Commit complete.
SQL>
SQL> delete p where months_between(sysdate, d) >= 1;
2 rows deleted.
SQL>
SQL> select * from p;
        PX D
         3 31-01-2011
SQL> select * from c;
        CX         CY
        30          3
SQL>Edited by: P. Forstmann on 15 févr. 2011 13:45

How to filter parent and child tables data in impdp?

Hi Friends,
i hope everyone doing good..
I have two tables in my schema like below.
STUDENT_DTLS:-
SID Sname CID
1     venkat     001
2     uppy     002
3     deepu     003
4     trinath     003
5     naveen     004
6     ramesh     005
COURSE_DTLS:-
CID CNAME Fee
001     Oracle     2000
002     java     6000
003     sieble     4000
004     informatica     3000
005     obiee 4000
if I load only few Student details say sid=1,2,3 into another environment using impdp,corresponding to those students course details from COURSE_DTLS table only need to be loaded.Not all course details.
Iam Expecting Result in new schema as below:-
SID Sname CID
1     venkat     001
2     uppy     002
3     deepu     003
CID CNAME Fee
001     Oracle     2000
002     java     6000
003     sieble     4000
But when i am using the below import scrit,The COURSE_DTLS is loading first and its query option(select cid from STUDENT_DTLS) is returning no rows.Because at that time no data is insertred into STUDENT_DTLS yet.
secondly it is importing data into STUDENT_DTLS with query option where sid=in (1,2,3) which is loaded propelry.
Thirdly it is trying to enable primary key and Foreign key constraints which is also failing because of no data in COURSE_DTLS table.
i have changed the order of tables in TABLES clause like tables=COURSE_DTLS ,STUDENT_DTLS.But still COURSE_DTLS table is loading first.
impdp pa_data_sub/******* NETWORK_LINK=qdssih30 tables=STUDENT_DTLS,COURSE_DTLS query='STUDENT_DTLS:"where SID IN(1,2,3)"','COURSE_DTLS:"where cid in(select cid from STUDENT_DTLS)"', CONTENT=all table_exists_action=replace directory=DATA_PUMP_DIR logfile=exp_join.log
output:
Total estimation using BLOCKS method: 128 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
. . imported "PA_DATA_SUB"."COURSE_DTLS" 0 rows
. . imported "PA_DATA_SUB"."STUDENT_DTLS" 3 rows
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-02298: cannot validate (PA_DATA_SUB.SYS_C0040905) - parent keys not found
Failing sql is:
ALTER TABLE "PA_DATA_SUB"."STUDENT_DTLS" ADD FOREIGN KEY ("CID") REFERENCES "PA_DATA_SUB"."COURSE_DTLS" ("CID") ENABLE
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Job "PA_DATA_SUB"."SYS_IMPORT_TABLE_01" completed with 1 error(s) at 17:28:13
Please suggest me how to achieve this task in a single import command?
Is there any option in impdp to prioritize the table to be loaded first?
Thanks,
Venkat Vadlamudi

You can't be guaranteed which order the data will be loaded in, so using a query that examines a table that is being imported is not going to always work the way you want it. The failing constraints makes sense because there is no data.
So, in your case, course_dtls gets imported first and the table student-dtls exists, but it not populated yet, so the select cid from student_dtls comes back with 0 rows. The second query works fine.
You might be able to change the query to be:
'COURSE_DTLS:"where cid in(select cid from STUDENT_DTLS@qdssih30 where SID IN(1,2,3)"'
This way, you query the source table pointed to by the network link and you use the same subquery from the first table.
This should work for you... I think anyway.
Dean

Join a Parent Table with 2 Child table based on a value

Dear Guru's
We have a Parent Table and 2 Child table . The Parent Table has a column like seqtype with only 2 possible values C and S . If the Value is C , then the details are available in Child 1 table and if the Value is S then the Details are in Child 2 table
How can we query the Data from this type of arrangement ? I am little bit confused and hit a road block
Will the following query will work ?
Select
from Parent P , Child C1, Child C2
where P.seqtype = C1.Seqtype
and P.seqtype = C2.Seqtype
With Warm Regards
ssr

You didn't mention the column names in two child tables. Whether the columns are same in 2 tables of these are different.
If the columns are same better to go and change your design to have only one child table. However if stiil business stops you having one table you can use UNION ALL (Assuming you want to fetch same column information from two child tables) like below:
SELECT p.col1
      ,c1.col2
      ,c1.col3
      ,c1.col4
FROM parent     p
      ,child      c1
WHERE p.seqtype = c1.seqtype
UNION ALL
SELECT p.col1
      ,c2.col2
      ,c2.col3
      ,c2.col4
FROM parent     p
      ,child      c2
WHERE p.seqtype = c2.seqtype Regards
Arun

Sql server partition parent table and reference not partition child table

Hi,
I have two tables in SQL Server 2008 R2, Parent and Child Table.
Parent has date time, and it is partitioned monthly, there is a Child table which just refer the Parent table using Foreign key relation.
is there any problem the non-partitioned child table referring to a partitioned parent table?
Thanks,
Areef

The tables will need to be offline for the operation. "Offline" here, means that you wrap the entire operation in a transaction. Ideally, this transaction would:
1) Drop the foreign key.
2) Use ALTER TABLE SWITCH to drop the old data.
3) Use ALTER PARTITION FUNCTION to drop the old empty partition.
4) Use ALTER PARTITION FUNCTION to add a new empty partition.
5) Reapply the foreign keys WITH CHECK.
All but the last operation are metadata-only operation (provided that you do them right). To perform the last operation, SQL Server must scan the child tbale and verify that all keys are present in the parent table. This can take some time for larger tables.
During the transaction, SQL Server holds Sch-M locks on the table, which means that are entirely inaccessible, even for queries running with NOLOCK.
You avoid this the scan by applying the fkey constraint WITH NOCHECK, but this can have impact on query plans, as SQL Server will not consider the constraint as trusted.
An alternative which should not be entirely dismissed is to use partitioned
views instead. With partitioned views, the foreign keys are not an issue, because each partition is a pair of tables, with its own local fkey.
As for the second question: it appears to be completely pointless to partition the parent, but not the child table. Or does the child table only have rows for a smaller set of the rows in the parent?
Erland Sommarskog, SQL Server MVP, [email protected]

Parent values should be enter into child table in 11g adf

HI ALL,
i' m using oracle 9i with 11g adf jdeveloper.
I have one parent table and child table respectively . I'm display both the parent and child table in one jsf page.Some fields/records in child table have same as in parent table.so when we enter values in parent fields the child table value should be placed.
Ex:
PARENT TABLE
ID
NAME
LOC
SAL
DEPART
COMP
CHILD TABLE
CID
PID
CNAME
LOC
SAL
DEPART
CNO
CPNR
LOC,SAL and DEPART are common fields in both tables
I display all the feilds in parent table , but i won't display LOC,SAL and DEPART field from Child table . Now i when i fill value in fields and fire submit . the values of LOC,SAL and DEPART parent table values should be enter in child table fields
Thanks in advance.

Create a custom Application Module method and expose it to the AM client interface. In it set the child VO attributes from the parent VO and submit. Bind this custom method to your Submit in the ViewController and call it from a backing bean.
Regards,
Nick

How to delete the duplicate rows present in the parent table & insert the latest duplicate record into the parent table linked with the child table.

I have a master table and i need to import the rows into the parent and child table.
Master table name is Flatfile_Inventory
Parent Table name is INVENTORY
Child Tables name are INVENTORY_AMOUNT,INVENTORY_DETAILS,INVENTORY_VEHICLE,
Error details will be goes to LOG_INVENTORY_ERROR
I have 4 duplicate rows in the Flatfile_Inventory which i have already inserted in the Parent and child table.
Again when i run the query using stored procedure,
its tells that all the 4 rows are duplicate and will move to the Log_Inventory_Error.
I need is if i have the duplicate rows in the flatfile_Inventory when i start inserting into the parent and child table the already inserted row have the unique ID i
must identify it and delete that row in the both parent and chlid table.And latest row must get inserted into the Parent and child table from Flatfile_Inventory.
Please help me to write the query i have attached the Full stored procedure Script..
Arunraj Kumar

Hi Santhosh,
This is my Script.
-- =============================================
-- Stored Procedure for FLATFILE_INVENTORY
-- =============================================
-- Drop stored procedure if it already exists
DROP PROCEDURE SP_Flatfile_Inventory
GO
CREATE PROCEDURE SP_Flatfile_Inventory
AS
--USE IconicMarketing
GO
DECLARE
@FileType varchar(50) ,
@ACDealerID varchar(50) ,
@ClientDealerID varchar(50) ,
@DMSType varchar(50) ,
@StockNumber varchar(50) ,
@InventoryDate datetime ,
@StockType varchar(100) ,
@DMSStatus varchar(50) ,
@InvoicePrice numeric(18, 2) ,
@CostPack varchar(50) ,
@SalesCost numeric(18, 2) ,
@HoldbackAmount numeric(18, 2) ,
@ListPrice numeric(18, 2) ,
@MSRP varchar(max) ,
@LotLocation varchar(50) ,
@TagLine varchar(max) ,
@Certification varchar(max) ,
@CertificationNumber varchar(max) ,
@VehicleVIN varchar(50) ,
@VehicleYear bigint ,
@VehicleMake varchar(50) ,
@VehicleModel varchar(50) ,
@VehicleModelCode varchar(50) ,
@VehicleTrim varchar(50) ,
@VehicleSubTrimLevel varchar(max) ,
@Classification varchar(max) ,
@TypeCode varchar(100) ,
@VehicleMileage bigint ,
@EngineCylinderCount bigint ,
@TransmissionType varchar(50) ,
@VehicleExteriorColor varchar(50) ,
@VehicleInteriorColor varchar(50) ,
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max) ,
@InteriorColorCode varchar(50) ,
@ExteriorColorCode varchar(50) ,
@PackageCode varchar(50) ,
@CodedCost varchar(50) ,
@Air varchar(100) ,
@OrderType varchar(max) ,
@AgeDays bigint ,
@OutstandingRO varchar(50) ,
@DlrAccessoryRetail varchar(50) ,
@DlrAccessoryCost varchar(max) ,
@DlrAccessoryDesc varchar(max) ,
@ModelDesc varchar(50) ,
@Memo1 varchar(1000) ,
@Memo2 varchar(max) ,
@Weight varchar(max) ,
@FloorPlan numeric(18, 2) ,
@Purchaser varchar(max) ,
@PurchasedFrom varchar(max) ,
@InternetPrice varchar(50) ,
@InventoryAcctDollar numeric(18, 2) ,
@VehicleType varchar(50) ,
@DealerAccessoryCode varchar(50) ,
@AllInventoryAcctDollar numeric(18, 2) ,
@BestPrice varchar(50) ,
@InStock bigint ,
@AccountingMake varchar(50) ,
@GasDiesel varchar(max) ,
@BookValue varchar(10) ,
@FactoryAccessoryDescription varchar(max) ,
@TotalReturn varchar(10) ,
@TotalCost varchar(10) ,
@SS varchar(max) ,
@VehicleBody varchar(max) ,
@StandardEquipment varchar(max) ,
@Account varchar(max) ,
@CalculatedPrice varchar(10) ,
@OriginalCost varchar(10) ,
@AccessoryCore varchar(10) ,
@OtherDollar varchar(10) ,
@PrimaryBookValue varchar(10) ,
@AmountDue varchar(10) ,
@LicenseFee varchar(10) ,
@ICompany varchar(max) ,
@InvenAcct varchar(max) ,
@Field23 varchar(max) ,
@Field24 varchar(max) ,
@SalesCode varchar(max) ,
@BaseRetail varchar(10) ,
@BaseInvAmt varchar(10) ,
@CommPrice varchar(10) ,
@Price1 varchar(10) ,
@Price2 varchar(10) ,
@StickerPrice varchar(10) ,
@TotInvAmt varchar(10) ,
@OptRetail varchar(max) ,
@OptInvAmt varchar(10) ,
@OptCost varchar(10) ,
@Options varchar(max) ,
@Category varchar(max) ,
@Description varchar(max) ,
@Engine varchar(max) ,
@ModelType varchar(max) ,
@FTCode varchar(max) ,
@Wholesale varchar(max) ,
@Retail varchar(max) ,
@Draft varchar(max) ,
@Inventoryid int;
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY];
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ;
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT @VehicleVIN ;
-- ****************** insert into Inventory Table ***********
INSERT INTO INVENTORY
IconicDealerID,
StockNumber,
DMSType,
InventoryDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate);
set @Inventoryid = scope_identity();
PRINT @Inventoryid;
--Insert into Inventory_Details Table
INSERT INTO [INVENTORY_DETAILS]
InventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode
--Insert into Inventory_Amount Table
INSERT INTO [dbo].[INVENTORY_AMOUNT]
InventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail
--Insert into Inventory_Vehicle Table
INSERT INTO [dbo].[INVENTORY_VEHICLE]
InventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage
-- Move cursor to Next record
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
GO
SET ANSI_PADDING OFF
GO
Arunraj Kumar

Selecting Lists/Grids From a Child Table

If I have a parent table "Patient" it has two product tables (Parent Table related 1 <--to--> Many Child Tables) and I make a screen for One Child Table so that it gives me a selection box for the parent table. I can already then
show on the screen properties of the patient from the table I selected. Can I also bring up a List or Grid of the Other Child Table based on the patient I selected?

I don't want to display something in the grid. I want to show all of the entries in that grid for a certain person. I want to grab the grid as a control showing all of the properties in a grid not showing them as individual labels or text etc....
I am not on that entity I am on the orders entity it is already related to the customer to do that to get customer data. The Customer entity/table is related to the allergies entity which is related to Medications to pull up the names of drugs the customer
is allergic too. I want to pull up the whole grid of allergies as a grid I solved this for now by making a single property on the patient table and grabbing all of the rows for a particular patient. then making them one field. I cannot however grab them as
a table and have the advantage of the UI of the grid or list functions.

How to create ddl for partitioning for a child table?

Hi folks,
I am new to the partitioning topic. I red some manuals and tutorials but I did not found exactly what I need. So I would ask for your help.
I have two tables.
The partitioning of the master table is clear:
create TABLE ASP_PARTITION_TABLE_MASTER
MASTER_ID VARCHAR2(20) NOT NULL
, TIMESTAMP DATE
, DATA VARCHAR2(20)
, CONSTRAINT ASP_PARTITION_TABLE_MASTE_PK PRIMARY KEY
MASTER_ID
USING INDEX
ENABLE
PARTITION BY RANGE (TIMESTAMP)
PARTITION PARTITION1 VALUES LESS THAN (TO_DATE('20090101','YYYYMMDD')) NOCOMPRESS
, PARTITION PARTITION2 VALUES LESS THAN (TO_DATE('20100101','YYYYMMDD')) NOCOMPRESS
, PARTITION PARTITION3 VALUES LESS THAN (TO_DATE('20110101','YYYYMMDD')) NOCOMPRESS
This table should be partitioned by a timestamp.
Now comes the difficulty:
I have a child table which has the master_id as foreign key. The slave table should also be partitioned by the timestamp - but this one occurs only in the master table.
CREATE TABLE ASP_PARTITION_TABLE_SLAVE
SLAVE_ID VARCHAR2(20) NOT NULL
, FK_MASTER_ID NUMBER(10)
, DATA1 VARCHAR2(20)
, DATA2 VARCHAR2(20)
, COLUMN1 VARCHAR2(20)
, CONSTRAINT ASP_PK_SLAVE PRIMARY KEY
SLAVE_ID
ENABLE
ALTER TABLE ASP_PARTITION_TABLE_SLAVE
ADD CONSTRAINT ASP_FK_MASTER_IS FOREIGN KEY
SLAVE_ID
REFERENCES ASP_PARTITION_TABLE_MASTER
MASTER_ID
ON DELETE CASCADE ENABLE;
How can I create such a range partition for the slave table?
PS: Currently we are using oracle 10.2 but we will upgrade to oracle 11g in near future.
Thanks in advance,
Andreas

@sb92075:
seems if I should give more details:
the parent table is holding the master_id, the timestamp and plenty of general information which is valid for all children.
Each parent has between 5 and 50 children which contain different data items. So our child table is much bigger than the parent table.
Our selects are joining parent and child table filtered by the timestamp and some other indexed rows, so we are not saving the same timestamp redundantly.
@bluefrog
With the partitioning we would like to reach the following goals:
1. gain more performance (quicker response time)
2. get the ability to archive and drop partitions which are older than a specific timestamp. (We only need to keep the data of the last 1.5 years so we would like to drop the complete partition / tablespace instead of using a delete-statement which generates much load (transaction, archive, logging)).
Thank you for your links. I will have a look on it.
But due to the archiving issue we would also like split up the child table by the timestamp of the parent table.
Regards, Andreas

Two parents one child table scenario

Similar Messages

Maybe you are looking for