Two part Bidding and cFolder

Hi friends,
We are using SRM 7.0 with PPS. I have configured cFolder for Two Part Bidding. I am facing problems for Opening Technical Bid. Before opening date and time I am able to access files attached by vendor through cFolder. Is there any provision to give Opening date and time in cFolder. Am I missing any configurations?
Please suggest me.
Regards,
Abhijeet

Thanks Saeid Hasani & Dan Guzman for the information.
Dan, to answer your question "Why you need schemabinding here". This function is used in a computed column, I want that computed column to be
PERSISTED, and as far as I know all functions used to compute the value of a computed column have to be deterministic if we want that column to be
PERSISTED, and what I know also is that if we want to convert a function to deterministic we have to add
WITH SCHEMABINDING in
the function definition ...
So is there a way to make this function deterministic without
WITH SCHEMABINDING ?
OR is there a way to make a computed column
PERSISTED without its functions to be deterministic ?

Similar Messages

Situation / Assumptions: Hardware: ASUS K70 Laptop ABseries. OS: Windows 7 Home Premium. Software: Adobe Photoshop Elements 12. Purchased CD version. (Consists of two parts; Organizer and Editor). Installed the end of 20

Ik kan Editor niet meer openen. Elements 12 staat op mijn harddisk vanaf een gekochte CD, heeft ruim een jaar goed gewerkt, maar wil nu niet meer starten. Ook niet nadat ik opnieuw heb geïnstalleerd vanaf de originele CD. Wie kent dit probleem en kan mij helepen de Editor weer werkend te krijgen?

try reseting your preferences -
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

A friend set me up with icloud and in the process he lost some of the book i was listening to. I can't find it in my ipod or on my computer. It is part one and two of a book; interest part three showed up hough.

A friend set me up with icloud on my ipod touch and in the process lost part one and two of the book I had purchased from itunes. I searched for it and it is not in my ipod any longer, although part 3 is there. I tried to download it again from itunes store but they said I already purchased it and I didn't want to be charged again. What can I do? I am not happy at all because all I did with my Ipod was listen to my book and now I can't.

Hi.
If you've bought it from iTunes, you should be able to re-download it for free.
Download directly from iPod by going to the iTunes Store-App and find the "Purchased"-menu. From here you should get a complete list of all your bought items and the ability to re-download.
Download from iTunes on PC/Mac by opening iTunes > Go to iTunes Store > Go to the menubar on the left and choose "Purchased". Now, from the appearing window select the proper categori on top of the screen.
I hope this was helpful.

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads

I would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??, i would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??

i would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??, i would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??

Go to the Project Library View and select your project.
Then FILE/DUPLICATE PROJECT and give the duplicate a name like "your name - part 1".
Then duplicate it again and give the duplicate a name like "your name - part 2"
Now you can open "part 1" as a project and delete everything that is in part 2.
Open "part 2" as a project and delete everything that is in part 1.

How can I make biscuit and then break it to two parts and have some small pieces?

Hello there,
please tell me ..
How can I make biscuit in AE and then break it to two parts and have some small pieces fall down ?
any help would be so much appreciated ..

Strictly inside AE you have two options. Shatter using custom shatter maps and masking + particle effects. Neither would be as conviceing as Dave's solution.
If you have access to a 3D app (blender is free) you can do it there.
Here's a 2 minute project in AE with a stock image:
with a shot of the broken buscuit top animated to fit the split it might be kind of convincing.
Here's the CS6 AEP project file for you to play with. Take a look at all of the elements to see how this worked by selecting all layers and then pressing the u key twice to see everything I changed.

I purchased an audiobook and there are two parts/files to it. I-Tunes is only finding one of the files. How do I get it to find and consolidate the files under one book title?

I purchased an audiobook and it has two parts/files to it. I-Tunes only shows on file under the book title. How do I get i-Tunes to find and associate the two files under one book title?

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

In the case of Bidding, Vendor will submit 1pack bid and 2pack bid.

Hi SRM GURUu2019S,
We are implementing SRM 5.5, SUS, cFolder, and LAC.
Scenario : In the case of Bidding, Vendor will submit 1pack bid and 2pack bid. If vendor submitted 2pack bid, We want evaluate Techno-commercial bid, If he qualifies then we will accept him to Price bid, In Live Auction or In the Bidding Engine. If the vendor not qualified we have to send me a letter.
Question : 1. How to evaluate weather is it 1Pack bid and 2 Pack bid?.
                   2. How to evaluate 2 pack bid Techno-commercial?.
                   3. How to send a letter to rejected vendors?.
Greatly appreciate, If any help me to find solution.
Thanks & Regards,
John.

Hi,
I appreciate that you are implementing SRM 5.5, SUS, cFolder, and LAC.
You are implementing the Sourcing scenario.
Instead of implementing in SRM 5.5 better go for SRM 7.0 with Procurement for public sector (PPS) fucntionality
The following advantages are the.
1. 1 pack bid (single Cover system)
2. 2 pack bid (Double cover system)
is a standard functionality in SRM 7.0 /pps in addition you can enter the Tender Fees,EMD Fees ,
also. While creating the bid itself you can select 1 pack bid (or) two pack bid
Question : 1. How to evaluate weather is it 1Pack bid and 2 Pack bid?.
if it is 1 pack bid you have to enter the opening date and time only once where the technical bid and price bid will be there.
if it is 2 pack bid the technical bid opening date and time is say 11.08.2009 the price bid opening date 25.08.2009 can be set and the bids are published
2. How to evaluate 2 pack bid Techno-commercial?.
There is a comparison button in SRM 5.5 and in SRM 7.0 also the same functionality.Out of the bids that wer submitted it will choose the least.. but for practical purpose each client has to decide on other factors .so better price comparison should be done manually even though system propose the least price
3. How to send a letter to rejected vendors?.
you have sent a mail or letter out of SAP .(or) most probably during the bid itself all the bidders will be participating there you can announce and sent the mail perosonally (or) Z program can be written
In SRM 5.5 you have to do some developments for the 2 pack system
IT IS STANDARD IN SRM 7.0 WITH PPS AND IT IS AVAILABLE IN THE MARKET..
Better convince the client to go for SRM 7.0 which is released in APRIL 2009 ..
SRM 7.0 is supported by WEBDYNPRO BASED and WORKFLOW for approval is new called
BUSINESS RULE FRAMEWORK (BRF)
Hope you are clear
Regards
Ganesh

Two envelope bidding error

Hello ,
We are on SRM 7 EHP1 .
Netweaver Portal Version 7.3
We are trying to implement Two envelope bidding
I have a purchaser role and when i try to create a two envelope Rfx, I am able to open.
After the Rfx gets opened , when i click on Technical Rfx , i was getting an error like No Iview available for system SAP_SRM object "TechResp".
I consulted my portal consultant and he replaced my SRM 7 Strategic Purchaser with SRM 7 Ehp1 Strategic purchaser
Now when i click on Technical Rfx , the error is not repeating but a blank screen appears.
I have followed all the configuration given in the below
http://help.sap.com/saphelp_srm701/helpdata/en/a7/ea98848f574388ab21778ddb306c4b/frameset.htm
Thanks
Aditya

Thanks Sam for your inputs but i have already made all the settings mentioned in the cfolder settings link that you shared.
I wanted to check if there are any more cfolder settings which needs to be taken care apart from what is mentioned in the link.
Just to give you more information , our cfolders is defined in the SRM system itself. So i have created an RFC which points to SRM itself and leaving the user name and pwd blank in the Logon data tab of RFC connection but for point no. 3 where it is mentioned that RFC user must be given the SAP_CFX_USER role , since i have no RFC user , I couldnt assign any roles.
Is this correct ?
And in the config step , Basic data for Technical RFX Response folders , where the default five folders related to two envelope bidding are listed, these should get created as soon as the Purchaser clicks on Technical rfx as per the help.sap documentation but in my case , it is not redirecting to the Cfolder collaboration room.
Want to also check that in Portal, are there any Cfolder roles or any other role which needs to be given to the Purchaser ?
To summarize the steps i have done till now.
1. Have performed the two envelope bidding config steps mentioned below.
http://help.sap.com/saphelp_srm701/helpdata/en/a7/ea98848f574388ab21778ddb306c4b/frameset.htm
2. Have performed the Cfolder settings mentioned in the below link
http://help.sap.com/saphelp_srm70/helpdata/en/43/143d2e25fc2be8e10000000a1553f7/content.htm
3. In SRM GUI,
Have assigned Purchaser with
a.Strategic Purchaser EHP1 role
b. SAP_CFX_USER
c. SAP_CFX_ADMINSTRATOR
In Portal , have assigned Purchaser with
a. Strategic Purchaser EHP1 role
And Hi Lalit, Good to hear from you. Thanks for your inputs . Your points 1 and 3 have already been taken care.
I tried adding the Cfolder link to the ITS_DEST but it didnt help. Can you help me with any more pointers.
Thanks
Aditya

Write a progarm to test two parts at the same time

Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012

From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments

Report to find a material by a mfr part number and old material number

Hi,
Is there any standard report to find a material by a mfr part number and old material number ?
For the moment, we are using MM03 to search articles by these selection criterion.
Thanks,
Julien Girard

Hi
As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
Use Txn SQVI, enter the Quick view field say- ZMNFR and click the create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter MARA for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only. Click the tick mark , you will go to the next screen,
You will notice Quick viewer Intial screen
Open the node general material data
Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
Please ensure that you are maintaining both the details in material master basic data1 and purchasing view if you wish to get out output
Best regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:52 AM

I get Singed out of eBay when I bid and when I go to a other item.. I can be on "my eBay" and just click on any other item and boom I'm on a page that says I need to sing in.

I get Singed out of eBay.com when I bid and when I go to a other item.. I can be on "my eBay" and just click on any other item and boom I'm on a page that says I need to sing in..if I click back it brings me back to "my eBay" and I am still singed in but if I was not to click back and I click on sing in I have a page saying I singed out.. sooo I do the obvious and clean out the cache and so on, disable all and then just some addons and try again and just to be sure I opened IE9 for the first time ever on this year old pc and it works fine so I know the problem is with FF4 but I'm out of ideas so what are my options? I dont wanna have to use IE9 but I need basic stability!!
I give a A- on the rest of FF4 & that makes this even more annoying because I want to use FF4!! I make my butta on eBay.com so I'm on all day buying & selling so I really need a quick fix or I'll have to make a quick move to Opera or IE9..PLEASE DON'T LET THAT HAPPEN...LOL!!
Please help me on this one & Thank you in advance to anyone who helps me I appreciate it allot!

The Get Info. fields show up gray if the files is locked and iTunes knows it can't edit the file. Make sure the files are not marked as read only and, if necessary grant both your account and system full access to all files and subfolders of your media folder.
You can set Part of a Compilation for multiple tracks from the Options tab of Get Info.
See Grouping tracks into albums for tips on getting iTunes organized.
tt2

HT201412 My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work, As long as I have this situation I can do nothing on

My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!

I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off?

Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

Generally setting a common Album title and Album Artist will fix things.
For compilations that aren't, select all tracks, Get Info, and on the option tab set Part of a Compilation to No. If it already says No tick the box alongside, then click OK.
For deeper problems see Grouping tracks into albums.
tt2

How to split a text in two parts?

Hello everyone,
I'm trying to make a text appearance, with a smilar effect as the one in this video (1 mn 43) :
After Effects Template : 65 Title Animations - YouTube
My problem is, I'd like to split my text in two parts, at the middle of a letter, so I can separate the text in two parts then gather it up at the end of the animation.
I've tried to take a look at the text's animation tool, where you can make it spin, or rotate and this kind of stuff, but I can't find out how to make a letter really split at its middle.
Thank you in advance and sorry for my english.

Duplicate your text layer and mask.

Two part Bidding and cFolder

Similar Messages

Maybe you are looking for