Two Partitionen one CS3
On iMAC 7.1 I have set up in one Partition Snow Leopard with CS 3 (all runs perfect)
in the other Partition: Mountain Lion . Here I want to open CS3 which is on the MAC and klickable
But the System wants to set up CS 3 once again.
What happen when I do so? Can I still work with SnowLeopard on CS3 . Do I have after two CS3 Versions on the Mac?
Yes, you need to properly install it. Even if it's on the same physical machine, it counts as another computer when booting into a differnt version of the operating system. If you still have your 2 activations available, this should not be a problem and the software activate on both.
Mylenium
Similar Messages
-
We have two iphones , one imac , and one itunes account. Hope someone can tell me an easy way to synch each iphone so that our contacts stay separate. I would like to share itunes music etc but not synch the same contacts to each phone...major problem... Thanks!
You have a few options which are detailed here:
http://support.apple.com/kb/ht1495 -
Two phones one apple account how do I stop imessage from one going automatically to the other?
two phones one apple account how do I stop imessage from one going automatically to the other?
You need to setup iMessage on one of the two phones using a different AppleID.
-
Two iphones, one iTunes account, two icloud accounts
Hi,
I have two iPhones, one privat, one from my company.
I would like ...
... to have all music, apps, books bought via iTunes to be on both iPhones - use same Apple ID for iTunes account?
... seperate calender, contacts, todos - use different Apple IDs for iCloud?
Is there still a way to have all pictures taken in one common photo stream?I have the same question. My daughter and I share an apple account which is fine, but now I am getting some of her texts and each time I send her one I get a duplicate? I thought I messed this up when we tried to Facetime each other and I have deleted all those options. How do I fix it so I have my own texts and she has her own texts, I don't get duplicate texts but she can still access our I tunes account? Please help
-
Two apple ids, two computers, one phone#-how to sync messages on on both computers
Okay apple world, I'm a bit stumped with this one: I have two macbooks, one for work (a 2009 15" macbook pro) and a personal one (2014 13" macbook air) and two apple ids, one for work and one personal one. I also have a 5S iPhone, which I use for both work and personal use. The iPhone has been set up with my personal apple id and my iMessages sync perfectly with my personal macbook air. Now what I would like to do is sync my iMessages through my phone number with my work macbook pro. But when I try to add an additional account, I am only given the option to add a google account or I am told that my (personal) apple id is already in use. Has anyone encountered this issue and do you have any tips on how to trouble shoot through this?
Sync is about synchronisation to Lightroom Mobile, the iPad/iPhone app, not about synchronising from one computer to another. There isn't really a way to sync two computers automatically, but you can use methods such as File>Export/import as Catalog, Dropbox, or copying through the operating system.
-
i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
-
I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show and open up. How do I prevent this?
Log in to your account, and move all your files to your home folder. No other users should be able to access them there and they won't show up with a Spotlight search.
Make sure your kids' account(s) do not have admin privileges. -
Two MacBooks, Two Users, One MobileMe Family account
My wife and I both have MacBooks (different ones). We have a MobileMe Family account. Each laptop uses are unique MobileMe names, address books, calendars, etc... (i.e. I have an account, she has a MobileMe account). We both also have our own iPhone linked to these accounts respectively.
We also have a 'joint' MobileMe account (email and calendar only). This same joint account is the iTunes account for both of us.
We are still on MobileMe. I see lots of people having problems.
One problem I anticipate we will have is: How will iCloud know how to sync our accounts between hers, mine, and ours? There apparently is only one setting: ON and OFF.
We want our individual MobileMe accounts syncing email and calendars from our MacBooks and iPhones -- but our Joint account (iTunes, email, calendar) syncing to us both.
Is this going to be a mess on iCloud?
Thanks for any tips on how to better prepare for the conversion.Roger,
Thanks for the reply.
I think I understand what you are saying.
I am wondering why the iCloud would be device-dependent. For instance, we have in our home two MacBooks, two iPhones, one iPad, one AppleTV. So, somewhat preciently knowing we'd eventually have more Apple devices, our main account (esp for iTunes) is our joint account. Joint email, calendar, and iTunes/iBooks content. Works great.
So, if we had a family with children with their own accounts, would it then not be possible for each person to have their own accounts and iCloud syncing off of, say, one home computer?
I recall in Steve Jobs's presentation that they 'demoted' the computer to just a device served by iCloud (much like the iPhone, iPad, etc... So, if an iPad can have multiple MobileMe accounts, as a MacBook may, why couldn't iCloud sync them all?
Thanks for the instruction -- just trying to figure out how to get things set up when we go to iCloud (we haven't turned it on yet for this reason).
I see in the discussions forums loads of issues from people switching over.
Maybe the right way to do it is each MacBook retains their accounts. Same with the iPhones. But turn off the other, shared accounts. Turn on iCloud...let it see everything, get synced: Computer A with iPhone A with iCloud Account A (email and contacts only). And Computer B with iPhone B with iCloud Account B (email and contacts only). Then add in the shared iCloud Account (email/calendar/iTunes only).
Thoughts?
Chris -
I have two iPhones, one is a 4s and the other is a 3g. I have not used my 3g in some time now. I recently restored it but I cannot use it without a sim card, it says i have to "activate it." I cannot place my iPhone 4s sim card in it (too small), and i do not want to get a new contract or sim card for an iPhone that i do not ues very much.
Thanks for your help, but i cannot borrow a noral sim card now, my family has all up graded to iPhone 4s's, i have done this before, but one of my family had the same type of iphone so i could use theirs. Now i am the only one who still holds on to their old phone... I am not sure about buying an adapter...
-
I'm not sure if I'm in the right forum for this question, but I don't know where else to ask about installing on cross platforms. So, the computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?
Which Adobe product exactly?
Cloud: yes.
Creative Suite: no. -
When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.
I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do. -
I am trying to download the latest version of iTunes to my PC (windows XP) and I keep getting an error message or two. One is that it can't uninstall the previous itunes version, the other is that it can't find itunes.msi. I have tried removing the old version in add/remove programs, but it says the same error. I tried deleting every thing that has itunes in the file/folder/etc and it didn't help.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.
-
I have two computers one IMac 10.5.8 one MacBookPro 10.6.8. Updated the MacBookPro 10.6.8 and now my mail has disappeared on that computer - do I sync account to get all my mail content back onto the MacBookPro?
You can do it. This article from Macworld will be helpful to you:
http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
I recommend the "brute-force" method.
Just make sure you have your data backed up properly! -
- A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one window without having to be in full screen mode? I've managed to go some time like this, but right now it's just really annoying me. HELP!!!
Just drag the small window to the top right below the toolbar, you'll see the area highlighted and when you drop it the file should dock.
Maybe you are looking for
-
Please help! - No Input No Output
I only have the "Soundflower" options in the Audio Midi setup utility! I have no clue what happened. I didn't do anything major that would cause this change. Is there a place I can get the built-in audio drivers?
-
Create row as next row on click of add another row button not on top of it
My af:table is based on a transientVO (all the attributes are transient) This is just for data entry and not for data retrieval So i have placed add another row button on my af:table After i enter data in the first row and click add another row butto
-
When my Ipod is connected and Itunes is running. In "my Ipod" some of the tracks have an exclamation mark next to them. I have noticed that these tracks will not play properly. Is it because there was a problem uploading them to the Ipod? And would t
-
Scroll the document window to a specified graphic object
Hi, anyone knows a way to scroll the document window to a specified graphic object? I've tried with F_ApiScrollToText() function, but it works only with object containing text, and a graphic object ( like a line) doesn't contain text... Thanks in ad
-
Adobe PhotoDeluxe 4.0 and Windows 8
I have a new computer on Windows 8 and have Adobe PhotoDeluxe 4.0. How can I make this compatible?