Two Photos in Book above each other, not next to

Hi there,
the "Layout" feature allows only to present two photos on a page next to each other, but not one above the other (if they are more "panorama"-kind-of-photos).
Is there any possibiliy to change that?
Thanks for any hints!

All that's offered is what's in the layout menu.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

Booklet with pages one above the other, not next to each other

I have sheets of paper that is 13cm wide and 20cm tall. It is perforated in the middle.
When I go to File | Booklet in InDesign CS4 I setup a booklet which tries to print 2 pages next to each other but of course these it not enough room.
What I need to do is have the two pages be one above the other to fit on the sheet of paper. But I am unable to find a way to do that.
Any hints?
Thanks!

in the print dialog you can change the parameters
for output in the 'setup' section--see screenshot--width, height, orientation, page position
see this linked page:
http://www.thebookdesigner.com/2009/11/creating-a-pdf-for-lightning-source-in-indesign-par t-3/

Have been told if you use the same itunes account with two iphone you will receive each others text messages, is this true

Have been told if you use the same itunes account on two iphones, you will receive each others text messages, is this true?

you can use the same itunes id for purchases and so on, but have separate icloud id's for imessaging and all the icloud stuff. it's not preferable, but it isn't a problem either.
http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US

How do I unsync two I phones from receiving each others text messages?

How do I unsync two I phones from receiving each others text messages?

To fix this you have two choices:
On one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID (you can still share the same ID for purchasing in Settings>iTunes & App Stores); or
On both phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

Can't line up two shapes on top of each other -they repel away with each try. Need help!

I have been using Illustrator since version 88 (1988), and I just recently upgraded from CS4 to CS5.5. I'm on a Mac intel running v10.6.8
I was trying to lock a rectangle over a circle. I'm in preview mode and couldn't see the snap to point action, so I zoomed up to 3200% and turned off preview to view it better. I made the circle first, then I made the rectangle. I selected the complete rectangle with the direct selection tool and grabbed it by the top left point and dragged it to the top control point on the circle. After letting go of the rectangle it jumped away, only a .5 of a pixel but still it wouldn't stay in place. (at the 3200% view it looks like 3/8 of an inch jump)
A slight miss alignment in PostScript can cause a mitre limit problem "down the road" if my design happens to get reduced —and besides I'm just not used to Illustrator being inaccurate.
Being that this is CS5.5, I'm hoping someone else that has experience this and has a fix. Perhaps there is just a menu turn off/on that I'm not aware of for this version...
Any help here would be greatly appreciated.
See reference images below showing the jump distance -— its as if the two shapes have magnetically opposit polarity and they repel each other:
--Rob

Whenever installing a new version, at least review the information about new features.
Turn off the infernal Align To Pixel Grid feature.
JET

Two Macs don't see each other

Just bought a new Macbook and it's on the same subnet as my iMac. I have the firewall running in stealth mode on both machines. Neither one sees the other and Finder sidebar does not show any "shared" computers.
I'm assuming that I need to disable the firewalls for these two machines to see each other.
The question is: Once these two machines have located each other, will turning on the firewall in stealth mode shut down the sharing once more, or will it stay active?

Got it working. Disabled the firewalls, set up the sharing, set up the user accounts (different user names on different machines thanks to the Migration Assistant) and away it went. Re-established the firewalls and everything is cool.
Interesting how working on Macs changes ones thinking. I've become so used to everything just working well that I just slap things together without any advanced thinking -- on occasion that bites back. It didn't help that from a security standpoint, I had tightened down every nut I could find. If these had been Windows machines, I would've planned much more thoroughly and would have expected and anticipated trouble at every step of the way.
Thanks

Two ear file communicating with each other

HI,
I have one doubt,
I Have two ear files (two webservices actually) deployed succesfully in the same application server (Weblogic7.0). Let us say them a.ear and b.ear
In a.ear there are class say A.class and B.class. In B.java file there is a staic HashMap which stores some object based on some id. Also in B.java there is static method which takes the id as a parameter and return the corrospojnding object stored in the static hasmap.
In b.ear file there class say B.class and C.class. Note that this ear file has its own copy of B.class file. In C.java file i create an object (though i dont need create being it a static method) of B.java and calls the static object passing it the id and expecting it that it will return me the object stored in the Hashmap. it returns me null though it has the objects stored for that id.
Is it because both ear files has their own copy of B.class. but i though that that they are running in the same jvm in application server so it should not be a problem. if this is the reason then my problem will be solved if i put them in same ear file.
Can anybody put his insights into his experiences and lemme know what is the cause of problem and solution and for my knowledge why it is happening.
Best Regards,
Akhil Nagpal

You're right that the two have different copies of the class. This is because the EJB container uses a different classloader for different applications, to prevent statics clashing with each other and other related security reasons.
Usually if you want to communicate from one to the other, you would use the EJB mechanism itself. The JNDI names should be global (from simple tests I did in the past, this seems to be the case) so that one application can look up an EJB from the other.

How do I get my two iPads to FaceTime between each other?

After I bought my second iPad I 'registered' it under my existing ID. I can't seem to get FaceTime to work between the two iPads. I can't get FactTime set-up on the second iPad because it wants to change my ID. Do I need to change my ID and if so, how do it do this on one iPad only without changing the ID on the other?

If you want to Cascade this both the routers to each other then you can follow this link and it will help you in cascading this both the routers.

Isolating guest VMs from each other (not just the host)

Hello Everyone,
I've been playing around with visualization for a long time, but largely for testing and educational purposes.
For the first time I'm thinking of actually running some production systems in virtual machines instead of on physical hardware which which raises some new concerns for me that weren't really relevant previously, namely, security. In particular, I've been thinking about how to isolate the guest VM processes from each other.
It's decades-old best practice to isolate different server services to different machines to help prevent, say, security problems with your web server also comprising your mysql server. When you start virtualizing your infrastructure, you lose this benefit to a degree, if someone manages to compromise one of your VM servers and manages to exploit a vulnerability in your hypervisor to gain access to the host, it's no big leap to assume that they may be able to get access to your other virtual machines running on that host.
It seems to me, that if you want to improve your resilience to this kind-of exploit that you want to increase the isolation of your VM processes from each other. You could, say, run them as different users. If you're careful about permissions, then you gain back some of the security of running your servers on seperate physical hardware. An attacker could still exploit a local privilege escalation bug, but it at least provides another line of defense.
This sort of thing seems to be possible with qemu virtual machines, though it does require some work to get anything besides user mode networking working.
On the other hand, this sort of thing seems to be largely impossible with libvirt. It's possible to run as qemu vms as different users using 'qemu://session' but the documentation seems to suggest that this limits you to using the qemu user mode networking, which isn't practical for running publicly accessible servers. Since, as far as I can tell, all of the visualization management products around are based off of libvirt, this surprises me. It seems to me that someone would have wanted to try and do something like this before, but nobody has (as far as I can tell).
Indeed, there seems to be very little documentation out there about using qemu with tun/tap networking when running as non-root user. There is some documentation out there about using VDE (mostly via the deprecated vdeq wrapper), but alot of qemu write-ups skip over it. There's enough out there to suggest it's possible, it just doesn't seem to be written up anywhere (yet, maybe I'll write it up myself someday).
So, this makes me wonder, 'why not?'. Are there other things people are doing to isolate guest VMs from each other?
What are people running production services in VMs doing?

I suppose this is also something to think about, but I don't think I'd be that worried about it for my use-case. The majority of systems I plan to run could run completely headless and the physical security for the host computers should be pretty good. I'm more concerned remote code exploits in one particular VM allowing an attacker to execute on the host or in other guest VMs.

Plotting 2 Columns of Data Against Each Other, Not With Time

I have several data columns, one with current, one with voltage, one with time. I am trying to make and IV curve, plotting the current and voltage against each other, preferably with the voltage as the Y axis and current as the X axis. However, every time
I try to select the two columns and scatterplot them, excel automatically makes it either a stacked graph of current with time and voltage with time, or just gives me voltage with time. How do I get excel to simply graph the two columns that I select?

Try the following:
If you have a chart with 2 series V and I both plotted on the Y axis, against 1, 2, 3, ...:
Select the chart.
On the Design tab of the ribbon, click Select Data.
Select one of the two series (it doesn't matter which).
Click Edit.
Select the text displayed in the 'Series Y values' box, and copy it (Ctrl+C).
Click Cancel.
With the same series still selected, click Remove.
Select the remaining series, then click Edit.
Click in the 'Series X values' box, then paste (Ctrl+V).
Click OK, then OK again.
If you have a chart with only one series (either V or I) plotted against 1, 2, 3, ...:
Select the chart.
On the Design tab of the ribbon, click Select Data.
Select the series.
Click Edit.
If there is anything in the 'Series X values' box, clear it.
With this box still selected, use the mouse to select the data range of cells for the other quantity you want to plot.
Click OK, then OK again.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

I need a flash project that has two video's overlaid on each other with masks on each at 50%

I'm pretty new to Flash and need to have two video's layered on top of each other with masks that mask off 50% of each side so I have a Side-By-
Side comparison of the two video streams. I have encoded two videos with different settings and want to show a side-by-side comparison. Does anyone have a sample project or code that does this? I need a kick start.
Thanks in advance.

Connecting iPod to your home or car stereo

Two docking containers interact with each other

Hello everyone!
I have almost the same problem like here: [ALV tree & Docking container ???;
I need to have ALV tree on the left, and on the right need to display ALV grid filtred with the tree nodes.
but i need more specific help...
I really need an working example program with two docking containers, where clicking on some object inside one, changeing something in another one.
in se83 and dwdm there's no such thing.
RSDEMO_DOCKING_CONTROL only shows two docing containers, no interaction
SAPSIMPLE_TREE_CONTROL_DEMO does not use docking containers.
Do you know any simple example where two docking cointaners doing somethig like that?
Thanks & Regards
Przemek

Hi hamsterman,
You can use this code source after some modification. I hope it helps you.
http://wiki.sdn.sap.com/wiki/display/Snippets/Dispaly%20ALV%20report%20output%20in%20the%20SAME%20Selection%20Screen
http://help-abap.blogspot.com/2008/10/dispaly-alv-report-output-in-same.html
Regards,
Orhan

HT4889 The migration using Thunderbolt doesn't seem to work. I have two Mac's here, both about 2 months new, one is an AIR and the other an iMac27", both have Thunderbolt ports. I'm using a Thundebolt cable between the two. They never see each other.

I start the AIR in Target Disc mode, then start the iMac and run the Migration Assistant and follow the instructions as outlined here. The iMac just churns and never does come up with the AIR's hard drive.
Both machines are running Mountain Lion and all software is up to date.
Ideas?

Which are you migrating FROM and which TO? The FROM computer should be booted into TDM.
Mac OS X 10.7 Help- Transferring files between two computers using target disk mode

How to display different windows beside each other not on top of each other at bottom task bar

When I open a new Firefox window, it stacks it on top of all the others in the task bar at the bottom. I would like them to be BESIDE each other. It used to do that. Now I have to hover over the ONLY Firefox item on the bottom task bar and read the list to find the one I want to go to. This is a waste of time and tedious.
How can I change this?

I think this is governed by your general Taskbar setting. Please see the attached screen shot. To get that dialog, right-click a blank area of the Taskbar and choose Properties.

Is it possible for two admin setups to control each other?

Hi,
I have the admin portion installed on mac pro that is specifically managing 3 workstations on a private subnet. I have installed the same ARD 3.2 I guess admin version on my Mac Pro. I want to be able to use ARD to connect to the admin console that is on my subnet and in turn be able to control the 3 clients.
I can see the admin console but it won't connect to it. And when I go over to that admin console and try to connect to my Mac, it won't.
Is there an issue with two admin console trying to connect? Does it have to be a admin/client relationship only?
Thanks
Greg

o I installed from our 10 server license pack.
Note that it's actually a 10 client license, not a 10 server license. As Templeton said, for each system on which you want to install the ARD administration application, you need to purchase a separate copy of ARD.
How do I get different serial numbers on each machine from the same license pack?
You don't. If you want to have the administrator application installed on two systems, you will need to purchase a second 10-client copy of ARD.
Message was edited by: Dave Sawyer

Two Photos in Book above each other, not next to

Similar Messages

Maybe you are looking for