Two Piece Model Where Pieces Ship From Different Factories?

I'm looking to see if there is a way in SAP to set up a model (what a customer would order) that has components that are shipped from two different locations but the customer would only order ONE model. The problem crops up with the commercial invoice where the pricing is all contained in the orderable model but a "Piece" of the orderable model would ship from a different factory. I'm curious to see if there is a way to set up a "Two-piece" model in SAP that has different shipping points for the pieces?
We have an opportunity to save significant money if there is a way to do this in SAP.  I’m just thinking there might be other companies that have a product that due to size or where the factories are in the world, sell a product (model) to a customer where the pieces are shipped from different factories and put together at the customer site.  For example, the huge wind turbines.  The blades ship from one factory and the pole ships from another factory and its assembled on the customer site.  Or huge capital equipment.
Thanks for any guidance.
Greg

Hi! kris,
When u create he CRM order then against the ship to address entered an address number would be genrated so in table BUT020 u can get these ship to number and then from table ADRC u can retrive those two ship to addresses.
Regards
Mayank

Similar Messages

  • Dynamic link confusing two separate AE compositions in PPro from different projects

    I am using CS5 Master Collection for Windows 7 (64 bit) on an HP Pro desktop (Intel core 2 duo, 6Gb RAM). The tower has two hard drives installed (no RAID). CS5 is installed on the original C drive along with the OS, but the working files, footage etc are all on the larger, secondary F drive.
    I am working on a DVD project consisting of several seperate PPro projects. Each project has been colour corrected in AE using dynamic linking. Recently two of my projects suddenly became mixed up, by which I mean the video (not the audio) from one AE composition in one project has taken the place of another in another project. The clip remains the same length, but the link apears to be referencing the wrong clip during playback. Interestingly, there are two clips on the track above the affected clip that fade out and in at either end, during the dissolves between clips, the correct footage plays. It is only when the clip plays by itself that the problem occurs. The next clip also has the same error, though the problem only occurs for half the clip and then suddenly corrects itself. Just to be clear, All clips have been rendered, there are no more than two video tracks on the sequence, and I have tried replacing the composition from the asset menu (in which the clip plays back correctly), but the problem remains in the sequence.
    I hope that descrition is clear enough. My guess is some kind of file path error in the dynamic link, perhaps due to the separate hard drive. But I really wouldn't know. I'm very pressed for time right now and I'd prefer not to go against workflow and re-edit a new composition in AE, I would also like to understand what is going on in case it happens again.
    Any help with ths problem would be appreciated,
    J

    Thanks Colin, I tried what you suggested with both the AE Project that it should be referencing and the AE project it is erroneously referencing but both failed to fix the issue. Its as if a hidden clip were laid over the top of the one I want to play. Frustrating.
    Date: Mon, 24 Oct 2011 19:47:03 -0600
    From: [email protected]
    To: [email protected]
    Subject: Dynamic link confusing two separate AE compositions in PPro from different projects
        Re: Dynamic link confusing two separate AE compositions in PPro from different projects
        created by Colin Brougham in Premiere Pro CS5 & CS5.5 - View the full discussion
    It's not the comps that are the problem; it's the project file names themselves. You can have all the comps in a project named the same thing, and it'll be fine, but naming projects incrementally is an issue. After Effects includes a versioning function (Save and Increment) that will create a new AE project file with a serial number, e.g. AE Project 01, AE Project 02, etc. This is all well and good if you're just working in After Effects, but Dynamic Link gets confused and will usually start looking at the later project file for comps. That will just create a big mess, as you've found. Changing the names of the project files won't help things relink automatically properly, but it can help you fix things. Make all your DL AE comps offline in your Pr projects, and name your AE projects in a manner that is not serial (give them more random names). Select your offline AE comps, and right-click > Link Media, and point to the new AE project. Things should link up correctly then--but if they don't, you'll just have to remove all the AE comps from your Pr project, reimport the comps from the newly-named AE project, and replace them. It's a pain but it'll probably just keep getting worse if you don't.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3988711#3988711
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3988711#3988711. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Item shipped from different location than specified

    I'm not sure if it's worth leaving lower feedback over. Most of the time I leave really positive reviews, but the seller said it'd be shipped from New Jersey and according to the tracking information it's actually coming from Sweden. The item in question is a laptop battery. Shipping was free so it's hard to complain too much, but I prefer having items shipped within North America to minimize risk of damage, had I known it wasn't coming from the states, maybe I would have gone with someone else.
    Opinions? Am I just being a , or is this a legitimate concern?  

    Good point, once it arrives I'll go from there. I understand how big of an impact negative feedback can have on the seller, so unless something is wrong I'll probably leave five stars. 
    After closer inspection their listing does say "We'll find the nearest warehouse to ship from". I just question their math if Sweden was the closest.
    I guess it's just the principle of it. If an American seller offered something for $5 and just out sourced the order to a Chinese distributor it seems like it should be fraudulent. 

  • How can I create a diagram where equal data from different cells will be added to one sector?

    Hi,
    I'm a new Mac user, so I have a lot of problems and questions every day. Moving to Mac from PC is not an easy thing)
    Here is my problem:
    I need to create a few diagrams for my science work, but can't correct one mistake. Every time one data from one cell from the table takes its own place in the diagram. But I need to ceparate equal data to show it is one section.
    An example:
    Sex
    Age
    Female
    18
    Female
    18
    Female
    18
    Female
    25
    Female
    30
    We need to create a diagram to show that we have
    60% - 18 years
    20% - 25 years
    20% - 30 years
    But Numbers doesn't show it that way. Here how it does:
    So please help me. How can I do that?

    Hi ProCauda,
    Some example data of people and their age:
    The COUNTIF function will give the number of people of each age.
    In another table, B2 contains this formula (and Fill Down to the bottom of B)
    =COUNTIF(Table 1::B,"="&A2)
    In this example, 3 people are 18 years old, 0 people are 19 years old, and so on. Use this table to calculate each age as the % of the total, then use that as the data for your diagram (graph, chart).
    Regards,
    Ian.

  • Singles sales order shipping from  multiple plants in different lega entiti

    We are a global Mfg and distributor of scientific instruments. Due to the complexity and delicate nature of these instruments we may need to ship product from as many a three different shipping points / plants that are each owned by a different legal entity.
    Does SCM have any functionality to automate the co-ordination of the multi-plant shipment so that all the product can be shipped to arrive at the customer site at the same time ?

    Hi,
    How do you plan to make the order entries? What is the criteria to ship the product from different plants?
    Please clarify if you're talking about the same product being shipped from different plants or different products shipped from different plants? I can think of two scenarios because of  some ambibuity in your posting.
    1. Same product from different plants: If this is case, How do you plan to decide to split the order quantities  to be shipped from different plants into multiple lines in the sales order?
    2. Different products from different plants based on some criteria: If this is the case, I understand you will enter multiple order lines.
    In both the cases, there is something called 'Delivery groups' in ECC that is attached to Correlation Profiles in SCM GATP (though delivery groups can be used in ECC stand alone) which will make sure that all the items within the same delivery group have the same delivery date, ultimate delivery date will be the latest delivery date of all the items.
    Hope this is what you're looking for. If not, elaborate your requirement to help you better.
    Regards
    Mohan

  • Where do the DVDs ship from???

    Hi guys,
    I bought a movie on bestbuy.com and it shipped friday via Mail Express. I was wondering where it shipped from as tracking is not available yet for my item. Do they ship from MN?
    I am in the Cleveland, OH area and was wondering when should I expect it, as I have to leave for an overseas trip and would like to take my movie with me.
    Thnx in advance

    Well, there are various warehouses all over the country, so really, your DVD could have shipped from any of them. However, from what I've seen, we have one warehouse that typically ships out of Ohio (not 100% sure where, but it is in Ohio). I may be there, it may be coming from California. Without looking at your order, it'd be hard to tell for sure.
    If you're concerned about if it's going to make it to you in time, I'd call 888 BESTBUY, give them your order number, and they'd be able to track your order for you and find out, at the very least, how close it is to getting to you.
    Don't take what I say as being absolute. There's always room for improvement.

  • Cover flow displays the same two pieces of artwork for all videos.

    I've been adding a collection of tv series I have on DVD to iTunes 9.1.1, it all worked fine initially, I opened each video up of a series of tv programs and used the "Set Poster Frame" option to capture a frame of the program to use as the artwork for that program.
    I normally have the programs sorted by what tv program they belong to, so Cover flow only displays the first episode of a series' artwork. I'm not sure why though but something I did yesterday appears to have caused cover flow to blow a fuse.
    If I chose to sort by name before, cover flow would display all the artwork for each episode, and it showed all the different artworks correctly. Now though after some fiddling I did which I cannot seem to recount my steps back to, it only displays the same two pieces of artwork from two particular episodes for all the videos when it is sorted via name:
    http://img257.imageshack.us/img257/3052/tvprogcoverflow.png
    I've tried removing all the artwork, but there doesn't seem to be an option to delete the poster frame and the poster frame artwork doesn't show up under the artwork tab for the individual videos so I can't delete anything from there. If I select all the videos and then right click and get info, then select the artwork check box and click OK it seemingly deletes all the artwork... Then replaces it again with the exact same artwork!
    Although cover flow shows each video has having the same artwork if I Get Info each video it clearly shows it having the correct artwork so why cover flow is messing around like this I don't know.
    I've tried deleting the album artwork cache in the itunes folder, didn't work. I even tried deleting my entire itunes folder which I have separate from my library and the hidden prefs file in my actual library, but that didn't work either.
    Interestingly enough, if I re-add all the videos they automatically get listed as films and go under the film tab. When looking at them under their cover flow correctly shows every episode with the right artwork:
    http://img200.imageshack.us/img200/8234/filmcoverflow.png
    As soon as I change the Get Info options tab from Film to TV program either for one video or all of them, then cover flow screws up again.
    Any idea how to fix this annoyance?

    The weird thing is, it worked before. I encoded all the videos previously and had them all listed and didn't encounter this problem, but I noticed I'd forgotten to decomb/detelecine the videos so I deleted everything and re-encoded it all. AFter filling the tags out and setting poster frames again I was thinking of making life easier by just pasting the same artwork for every episode, so I did, but didn't like the results so I deleted it again (I selected every video, used Get Info and pasted the artwork that way).
    I think it was after this that the problem started to occur. In any case I've been through every episode and made sure the name, series, episode and episode id fields are all filled in with incremental values and they are. I even made sure the Sort Name field was filled in on every video. But this didn't work either.
    So, thinking another restart was needed I deleted every video again. Re-encoded them all, again. Set the tags for every video and poster frame again. Finished it all off nicely, checked cover flow and was highly annoyed to find it was STILL showing the same two pieces of art work for every video as shown in that image I posted.
    Ultimately, I wouldn't care so much that cover flow is screwing up like this as I always intended to sort by program anyway so it would only ever display one piece of artwork for an entire series of videos, however where-as when it was working it picked the artwork for the first episode of a series to display, its instead picking one of the latter episodes. I can't seem to find any way of choosing what artwork I want displayed.

  • Searching a board for two pieces on a diagonal

    Greetings,
    I am trying to write a predicate which checks whether there are two pieces placed on a diagonal on an 8X8 board (coordinates from 0 to 7) modelled as a one dimensional integer array such that the ith element of the array will contain -1 if there is no piece in column i and the row number of the piece if one exists in column i (which means there can't be > 1 piece in the same column). E.G. a board with a piece at the bottom left corner and another at the top right corner would be int[] board = { 0,-1,-1,-1,-1,-1,-1,7 }.
    Now how in the world can I write a predicate that takes such a board as input and returns true if >=2 pieces are on the same row? All I know about diagonals is that the change in the vertical direction has to equal the change in horizontal direction between two board coordinates if these two coordinates are on a diagonal.
    Any help would be much appreciated as this particular method is just one small part of a much bigger problem but the damn thing has had me stumped for the past three days.
    Thanks in anticipation.

      boolean checkDiag(int[] board) {
    for (int i=0; i<board.length; i++) {
    if (board==-1) continue;
    for (int j=i+1; j<board.length; j++) {
    if (board[j]==-1) continue;
    if (Math.abs(board[i]-board[j])==j-i) return
    return true;
    return false;
    Thanks for the swift reply. Quite simple really; silly me.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • InfoCube Modelling-Adding data from different ODS's on to the Infocube

    Hi Experts,
    I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
    In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
    And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
    For Example.
    I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
    there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
    And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
    I will make it clear.
    I have a record in CUBE already containing Fields- : Delivery no, field_a,  field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
    Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
    And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
    Will the value in this info-object get overwritten ?
    OR.. will it combine the data from both the ODS's and show it as ONE record ???
    Please advice ... How will I solve this scenario ?
    Thanking You in Advance
    Shyne Sasimohanan

    Answer for your question and the suggestion.
    the data will look like as given below
    Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
    11233           1           1           1          1            0           0            0            0
    11233          0           0          0             0           1           1           1          1 
    but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
    Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
    11233           1           1           1          1            1           1           1          1 
    Regards,
    Siva A

  • Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi...
    The issue is that your credit or debit card credentials must be associated with the same country where you reside to make purchases.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    Billing policy is the same for both the iTunes as well as Mac App Stores.

  • Is there a simple way to put two pieces of music together seamlessly? I just want a single, longer track.

    The music is 3:14 long.  I want to repeat it...seamlessly...withount a second or so hole between them. It's for  slide show background.
    I am definitely not a musician. But I figure I can do this in GarageBand.
    Thanks!

    OK... if it's the top right corner of the work space (the place where the track lies) where do I drag it to? Forgive me, but I'm not a musician, I'm a writer. To me, it's the "top right corner" there's no place for me to drag it to... except down or to the left.
    FYI:  The music is a very simple acoustic guitar solo.  The medium beat is clear and the point at which I'd put the two pieces together is equally clear. It's a pleasant piece.  Now you know as much as I do about the music.
    Thanks.
    1deu

  • I have 160gb of music on my Classic, 6th Gen (I think) I've just bought it. Is it possible for it to play my songs in a random order, one or two from different albums?

    I have 160gb of music on my Classic, 6th Gen (I think) I've just bought it. Is it possible for it to play my songs in a random order, one or two from different albums?

    To add to what Stonerock has mentioned, you can either create Playlists in your iTunes Library, containing exactly what you want, and then Sync them to your iPod, or you can use the iPod Classic's On-The-Go feature.
    Reading between the lines, I'm going to assume for now that you want to be able to create your preferred listening list while "out and about" - so not near your iTunes library. (You have posted in iPod Classic, after all.) You can do this with the On-The-Go Playlist.
    Look in the Playlists menu on the iPod. It probably contains the Recently Added, Recently Played and other pre-made Playlists that you see in your iTunes Library. At the bottom of the Playlists list, is the On-The-Go showing 0 Songs. Scroll down to it and press the Select (centre) button. The screen will give you instruction on adding songs to the On-The-Go Playlist.
    Basically, if you press-and-hold the Select (centre) button, while highlighting a song, the song title will blink as it is added to the On-The-Go Playlist. Try it, then go back to Playlists/On-The-Go and notice that it will now say 1 Song. (Note, you cannot add a "now playing" song to the On-The-Go Playlist.) Repeat this for every song you want to have in the list. You can also look in the Albums menu, highlight the album title and press-and-hold that to add the complete album to your On-The-Go Playlists with one press. So if you add the two albums to your On-The-Go Playlist, you can then listen to just those two albums.
    To shuffle the songs, turn on Shuffle on your iPod. Either, go into Settings/Shuffle and press the Select button to toggle between Off/Songs/Albums, or on the Now Playing screen, press the Select button three times to reach the Shuffle option, where you use the scroll wheel to move between Off/Songs/Albums, press the Select button to activate it.
    Having added songs to the On-The-Go Playlist, go into it and notice the list of songs and options to Save Playlist (New Playlist 1) or Clear Playlist. If you use Sync to manage your iPod (and that really is the best way by the way), the next Sync will transfer any unsaved On-The-Go and any New Playlist Xs that you have, back to your iTunes Library. You can even remove any song from the current On-The-Go Playlist by highlighting it (in the On-The-Go, obviously) and press-and-holding the Select button.
    If you need assistance in creating a Playlist in your iTunes Library, please ask.

  • Compare Merge Model problems with models from different connections

    Hi all,
    I've experienced a problem while using the compare/merge model funcion under tools.
    Just to put in place:
    I've 4 model, one for each enviroment that I have: DEV, INT, TEST, PROD(*each model imported from different connections*). Because I haven't found any reliable way to keep them sincronyzed, using DLL deltas. Is there a way to do that?
    Anyway, regarding the main subject problem. Whem I try to sync for example, from PROD, to TEST, using compare/merge model function under tools, the process find the differences. When I selecte those that I want, and click on merge, the destination model TEST, get the selected objects merged into.
    But now, the model Schema, when I select sincronyze model with data dictionary to get de DLL delta, things get crazy, and the merged objects doesn't get detected to be created.
    If it's help, I think that the is with the associated import connection than the merged objects have. They have the PROD connection name, instead of the TEST connection name. Also when I try to syncronize the relational model againts de data dictionary(database), datamodeler ask me wich connection to use, PROD or TEST. When, before, merging, model, data modeler did not ask me anything.
    Why is data modeler doing this?
    What I have seen is when you import in a model things from different connections/models, when you try to sincronyze agains a connection, all objects that are not from the selected connection doesn't get compared.
    Is there a bug or a problem?
    How can I can keep a schema in different enviroments, sync? What are the step that I shoulf follow?
    Thanks in advance.
    Edited by: morfeo8marc on 14-mar-2012 11:17

    I shall try to explain what is happening here.
    When you import objects from TEST data dictionary, their source information (see Summary info in Properties dialog) will refer to TEST.
    The relational model for TEST will contain source information (see Summary info in Properties dialog) for the connection to TEST.
    Similarly, imported objects from PROD will refer to the PROD data dictionary, and the PROD relational model will hold connection details for PROD.
    If you merge PROD objects into the TEST model, they will retain their source information (i.e. referring to PROD).
    The TEST model will be updated to include connection details to PROD.
    When you synchronize a model, if it only has one source connection, it uses that.
    If it has more than one, it will prompt you to decide to which data dictionary it should synchronize.
    In your case, for the TEST data dictionary, it will synchronize all objects that have source information for TEST (i.e. those imported from TEST).
    It will also compare any new objects (i.e. those not imported from a data dictionary).
    It will not compare objects that were imported from a different data dictionary (e.g. PROD).
    This supports the scenario where a model consists of objects imported from more than one data dictionary, and where the data dictionaries are maintained separately.
    We may need to review the above strategy in light of your experience and development process.
    In the meantime, may I suggest that from your updated TEST model, you Import from Data Dictionary using the TEST connection.
    The resulting Compare Models dialog should show all objects (i.e. those from TEST and PROD).
    You may need to set the Swap Models option to generate DDL with which to update your TEST data dictionary.
    Thank you for raising this matter.
    Regards,
    Tony Rose

  • Has anyone's shipped yet? Where shipping from?

    I was curious if anyone has had his or her Hi-Fi ship yet. If so, is it coming from Asia, or the United States?
    I really want to order one, but I don't exactly have a lot of funds after buying my Core Duo iMac. I think this will be a sweet solution. People love to make fun of this device, but I imagine it sounds great. It is not some tiny little speaker. This was made to be enjoyed. It may not be world's great sound, but I think it will be impressive, for the price.
    I'm going to put this on top of television center. Plug TV audio out into the mini input on the back of the Hi-Fi unit and put iPod on top. Then I can watch television with audio from Hi-Fi, but have iPod music a button away too. Nice.

    I actually ordered the Hi-Fi online and just received the unit and tested. Not being an expert audiophile, i did appreciate the robust feel of the unit with the sound feeling just as solid. It is well built and complies with Apple's philosophy of simplicity.
    I am extremely disappointed with a couple of issues:
    1. The remote control is just to basic. Does not allow you to access your menu on the iPod even though the remote control does have a menu button. After reading the manual, i discovered that the menu button only toggles between inputs from different devices. For eg., if you had the Hi-Fi connected to Airport Express and an iPod on the dock, the menu button (on remote) only allows you to toggle between the two. You would think that an Apple designed and built product would give you full functionality of the iPod's menu through the remote. Sad this is not the case.
    2. For those of you who own the iPod Video, there is no Video Out capability. Again, i can't understand the logic behind this.
    Overall, i would give Apple's first attempt a 3.5 star rating out of 5. They can do better than this!

  • Updated to Yosemite, no problem.  now iPhoto and iMovie won't open.  Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software.  User ID and PW works everywhere else.

    Updated to Yosemite, no problem.  now iPhoto and iMovie won't open.  Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software.  User ID and PW works everywhere else.

    I am having the same problem.  I even changed my password and updated all of my security information.  Now it just gives me an error and retry message, which of course also does not work.  Went to support and was going to open a chat (seemed the simpler option) and received a message that my support has expired for this serial number unless I want to pay $29.00.  So I chose the option to call later, which was the exact time suck I was trying to avoid.  Why wouldn't the new operating system also update the apps that were already part of my old platform?

Maybe you are looking for