Two primary registers in one meter for a secondary meter device

There is this scenario is our context ... which results in having two primary registers against one secondary register, its like
one primary meter ... which is a TOU (peak off-peak) meter ... has a child meter which is not a TOU meter. Now, the consumption of the child meter is to be subtracted from active peak and active off-peak registers in the primary meter proportionally.
Do we need to write a functional module and define a new register relationship for this?

You can treat in rate steps also.
While calculating the meter reading result subtract the child meter reading from the primary meter reading.

Similar Messages

Malignant secondary boot device. When I plug in an external hard drive which has time machine in one partition and a secondary boot device in another, the secondary boot takes over and wipes existing files. How do I turn it off but keep the time machine

Please help new (senior) convert to Mac Pro (OS X). Am following the 'switching to a Mac' portable genius 2nd ed, and as it advised, I bought an external hard drive (a Mac My Word) and partitioned it with one partition for a secondary boot device and another for time machine. Book implied I needed both. Seemed to download OK but now when i plug in the external hard-drive it wants to reboot me fresh all over again. How do I keep the time machine partition going but have the secondary boot device only in case of emergencies? Do I 'eject' that partition- and if so how do I do it from outside the hard drive (I am not game to reattach it currently)

Launch the System Preferences application (under the Apple menu) and select the Startup Disk preference pane. Set your internal drive as the startup disk. Close the window.

Two Primary keys on one table

We are at the end of completing a project and we ran into a last minute bug. We are using two primary keys on a table to form a unique key. The problem we have is the program hangs up and gives us the following error,
ORA-20001: Error in DML: p_rowid=CUA, p_alt_rowid=SIT_ID, p_rowid2=, p_alt_rowid2=. ORA-01422: exact fetch returns more than requested number of rows,
probably meaning we only have one key setup in the DML
processing when our table has two.
we created a process with the Primary key set up in the DML but how does the secondary key column value work and is that what it's used for,because we tryed with no success. Is there a way around this problem without having to change our table by inserting only one primary key.
Thanks in advance.
Garry

I am facing a similar problem , I used the two primary keys for navigating to the form page (forms with reports) so that the form page may display distinct records.
Its not posing any error but its not showing the value of other columns associated with that record.
Only the columns contained in the page item in the form page , that's are used as primary keys or that have been specified in the navigation part of the report page, are being shown ,
Like for example I have got 5 columns
a,b,c,d,e out of which a and b are my primary keys .
I am using these to fetch values in the form page of forms with reports.
We can specify three keys at the most , in my case I am having two , if in place of the third key I specify some column then in the form page it displays the correct record details of the three columns specified( 2 keys and one simple column), and it doesn't displays the value of other columns.
Please help me out of this .

HT1495 Two User Accounts on one PC for two different iTunes accounts

this didnt work....I created a new user account on my computer but iTunes keeps telling me that the apple ID is associated with the computer, not the User Account, so it will not let me download new purchases. Do I need two computers

Hi Elvis Zuo,
Thank you for the suggestion, which is the only solution I could think of.
The problem is that this then means we have two separate copies of the iTunes library on our computer. At 25GB per library this will take up lots of hard drive space. I would prefer to try and use the same library between our two accounts/iTunes installs.
Thanks
Andy

How to use two gtx transceivers in one quad for two aurora ips

hera mgt bank is 113
i am using two aurora ips 64b66b .for one ip GTX_X1Y0, another GTX_X1Y2.while simulating ,results are good.Coming to implementation its showing error in implementaion.that in MAP.
Pack:2811 - Directed packing was unable to obey the user design constraints (LOC=GTXE2_COMMON_X1Y1) which requires the combination of the symbols listed below to be packed into a single GTXE2_COMMON component.
The directed pack was not possible because: The target component type can only contain one fragment.
The symbols involved are:
GTXE2_COMMON symbol "Source2/Aurora_2/src_2_wrapper_i/Src_2_multi_gt_i/gtxe2_common_i" (Output Signal = NULL)
GTXE2_COMMON symbol "Source1/Aurora_1/src_1_wrapper_i/Src_1_multi_gt_i/gtxe2_common_i" (Output Signal = NULL)
What is the solution for it?
find attachments.

i got following error while implementing project in vivado.
"[DRC 23-20] Rule violation (REQP-1739) GTx R/TXOUTCLK drives inappropriate load - GTXE2_CHANNEL cell design_1_i/aurora_64b66b_0/inst/design_1_aurora_64b66b_0_0_core_i/design_1_aurora_64b66b_0_0_wrapper_i/design_1_aurora_64b66b_0_0_multi_gt_i/design_1_aurora_64b66b_0_0_gtx_inst/gtxe2_i pin design_1_i/aurora_64b66b_0/inst/design_1_aurora_64b66b_0_0_core_i/design_1_aurora_64b66b_0_0_wrapper_i/design_1_aurora_64b66b_0_0_multi_gt_i/design_1_aurora_64b66b_0_0_gtx_inst/gtxe2_i/TXOUTCLK (net: design_1_i/aurora_64b66b_0/inst/design_1_aurora_64b66b_0_0_core_i/design_1_aurora_64b66b_0_0_wrapper_i/design_1_aurora_64b66b_0_0_multi_gt_i/design_1_aurora_64b66b_0_0_gtx_inst/tx_out_clk) should only drive BUFG, BUFH, BUFMR, MMCM or PLL loads, but drives one or more invalid loads such as FDRE cell CORE_STATUS_channel_up_master_reg. Please insert a BUFHCE (or a BUFMR, if the load is a BUFR) between the GT and its load(s).
[DRC 23-20] Rule violation (REQP-1739) GTx R/TXOUTCLK drives inappropriate load - GTXE2_CHANNEL cell design_1_i/aurora_64b66b_1/inst/design_1_aurora_64b66b_1_0_wrapper_i/design_1_aurora_64b66b_1_0_multi_gt_i/design_1_aurora_64b66b_1_0_gtx_inst/gtxe2_i pin design_1_i/aurora_64b66b_1/inst/design_1_aurora_64b66b_1_0_wrapper_i/design_1_aurora_64b66b_1_0_multi_gt_i/design_1_aurora_64b66b_1_0_gtx_inst/gtxe2_i/TXOUTCLK (net: design_1_i/aurora_64b66b_1/inst/design_1_aurora_64b66b_1_0_wrapper_i/design_1_aurora_64b66b_1_0_multi_gt_i/design_1_aurora_64b66b_1_0_gtx_inst/tx_out_clk) should only drive BUFG, BUFH, BUFMR, MMCM or PLL loads, but drives one or more invalid loads such as FDRE cell CORE_STATUS_1_channel_up_slave_reg. Please insert a BUFHCE (or a BUFMR, if the load is a BUFR) between the GT and its load(s).
[USF-XSim 62] 'compile' step failed with error(s) while executing 'F:/PERSONAL/XilinxVivado2014.2/shared_logic/shared_logic.sim/sim_1/behav/compile.bat' script. Please check that the file has the correct 'read/write/execute' permissions and the Tcl console output for any other possible errors or warnings.
[Vivado_Tcl 4-23] Error(s) found during DRC. Placer not run."
i am attaching topmodule file
need solution
thanks in advance
razz

HT3819 Can I merge two iTunes accounts into one account for home sharing?

I now have two children with iTunes accounts. Unbeknownst to me, we should have set up a home sharing network. I need to merge these two accounts to one account so we have only one home sharing account and do not loose any songs and media. Any ideas on how to accomplish this, or is it not possible?

Sorry to say but these Accounts cannot be merged...
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

Can I (or How can I) chain two Time Capsules on one network for two Macs?

Currently we have one dual-band TC connected to our cable modem. Mac 1 backs up to it. I also have an original TC (one-band) that I would set to 5GHz dedicated for Mac 2.
Would this plan work and provide Backup and Internet to both machines?
Cable Modem --->TC1--->TC2
Mac 1 would connect to TC1 for Time Machine function and Internet Access.
Mac 2 would connect to TC2 for Time Machine function and Internet Access.
(---> = Ethernet cable)

No changes needed on TC1, but you may need to use AirPort Utility - Manual Setup to note a few of the settings on TC1, such as the exact type of security that it is using now since that information will be used to configure TC2.
Connect an ethernet cable from one of the LAN <-> ports on TC1 to the WAN port (circle icon) on TC2*. Open AirPort Utility - Manual Setup and TC2 should appear. If not, you'll need to "hard reset" TC2 by holding in the reset button until the amber light begins to blink more quickly, hold another few seconds when you see this and then release
Click the Time Capsule tab below the icons to name your device, assign a device password and set Time Zone settings
Click the Wireless tab
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as TC1 network**
No check mark needed next to Allow this network to be extended unless you plan to add more wireless device to extend the network
Radio Mode = 802.11n only 5 GHz
Channel = Automatic
Wireless Security = Same setting as TC1
Wireless Password = Same password as TC1
Confirm Password
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and let TC2 restart. Then power down the entire network. Power up the modem first, then TC1, then TC2, then each device one at a time. Allow a moment or two for each device to fully power up before you start the next.
*When the TC is in Bridge Mode, it really makes no difference which port you use to connect, as they all behave the same. I use the WAN port as a habit for connections like this so that I know at a glance where the connection is coming from. But, you could connect to one of the LAN ports on TC2 if you prefer.
**Assign a different name than TC1 if you want to log on separately to the network that TC2 provides
Be sure to setup Mac2 to backup to TC2 for Time Machine and you should be all set.

I am setting up a time machine backup to a external Hard drive. I want to backup by Mac book Pro running OSX 10.8.5. I would like to Partition the disk and use one partition for Time machine backups and the other for my Lightroom backups. How to do this?

I want to create a two partition disk. One partition for time machine, the other for Lightroom backup. Currently Time Machine is using the entire drive and it is doing the intial encryption and is about 29% complete after two days. I've decided that I want to turn encryption off and partition the disk. So I do I start over?

With the external drive attached, open Finder>Applications>Utilities>Disk Utility. Select the external drive from the list in the left side panel of the DU window. In the main window panel, click Partition in the buttons top center of that panel.
Select the number of partitions you want and adjust their sizes.
For the first partition, click to highlight the partition, then select the format, Mac OS Extended (Journaled) and then the partition table as GUID [both of those are the defaults]. Click Apply and it will ask to confirm and erase and format that partion...oh, give the partition a name, like Backup.
Then repeat those steps for the second partition..and remember to name it...something like Lightroom.
Close Disk Utilitty and you are ready to send TM to the one partition, and do your backup of Lightroom to the second partition.

Backing up an external hard drive, one half for PC (FAT32), other for MAC?

Hey people, I've just bought a Lacie 1tb eternal hard drive which I would like to partition into two halves - in theory one half for the PC and the other half for the MAC, backing up all data held on the mac using Time Machine.
Is this possible?
If so, what is the best way to do it?
Would it be best to partition the PC half as FAT32 (MS DOS), and the other as MAC OS Extended (Journaled), on Disk Utility?
Many thanks for your help,
Tom

Yes, you can do as you describe.
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu to two. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Select the first partition from DU's left side list, select MS-DOS from the Format drop down menu, click on the Erase button.

Two small drive or one large drive

Hi All, this is closely related to the previous question but there were some subtleties I wanted to bring up. i was wondering if i could get your take on whether I should get one large drive or two smaller ones. I'm looking to use the external drive as my startup volume. is it true that using a larger drive can actually lower the performance of your computer? I the G3 500 only has one firewire 400 port but it's about time for me to upgrade anyway. the iomega triple interface (black) drives get pretty good reviews so I'm either gonna go for two 250 GB or one 400GB. for safety reasons, i thought that two drives would be better but it turns out that the 400GB has a 8mb cache while the 250GB has only 2mb of cache. is this going to make much difference to the performance of my computer?
Cheers.

Hi, K.L.T.
• A FireWire drive as a startup disk on a FW 400 port is going to perform slower than your internal hard drive, regardless of the size of the drive. However, you may not notice that much of a difference, other than a slower boot. Cache size will make a bit of difference, but so will rotational speed. You want fast drives (7200 RPM+) and lots of cache (8 MB is nice) for best performance.
• One can find 250 GB FireWire drives with 8 MB cache. I buy all my FireWire drives from Other World Computing (OWC). I've been very happy with the drives and their service. I'd recommend them over Iomega any day of the week.
• One drive vs. two: One drive = all your eggs in one basket. Two FireWire drives gives you the option of having redundant backups on each. Something to consider.
• See also my post here.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Two apple id's, one in settings other in app store. how to change the one in app store

I have two apple id's, one just for me and one for my family. Mine is showing in Settings on my ipad, but when i use the app store it asks for the password for the family one. How can i get it to use my id without deleting the family one?

Hello charlon06
It all depends on how you use your Apple ID’s You can use your Apple ID for iCloud and have you data synced that way and then the family account for just purchases. Check out the articles below on how to either manage having multiple Apple ID’s and associating them to devices.
Using your Apple ID for Apple services
http://support.apple.com/kb/PH14958
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Regards,
-Norm G.

I have two iTunes accounts. One was set up for my iPhone; the second was created for my iPad. I just updated my iPhone and it linked my to my second iTunes account instead of y primary. How can I change it back to my primary account?

I have two iTunes accounts. One was set up for my iPhone; the second was created for my iPad. I just updated my iPhone and it linked my to my second iTunes account instead of my primary account. How can I change it back to my primary account?

Hey bjboles,
Welcome to Apple Support Communities.
The article linked below describes what to do after changing your Apple ID, but you can use it as a guide to resolve the incorrect Apple ID account information entered issue that you described.
Apple ID: What to do after you change your Apple ID - Apple Support
Ciao,
-Jason

Tecra S11 - What are the two primary partitions for?

Hello everybody
I just got myself a new Tecra S11 with Win7 64 and there's one thing that wonders me a littlebit.
There are four partitions in total, for sure there's the Recovery one (1.46 GB) and the System one (256.38 GB), but then there are also two primary partitions (8.86 and 31.38 GB) without any displayed use or file system. There's no non-allocated space.
Can somebody tell me what these two partitions are for ? Because I want to split the system partition up to store my data on a separated one, if possible I also want to use that "unknown" space then ;)
Besides that: Don't worry, I already made recovery DVDs.
Greetings
Nico

This is funny: I just recreated the entire Harddrive using the recovery DVDs, now the two primary partitions are gone and the space is integrated into the system one, lovely :)
Is this maybe a faulty pre installation ?

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Ok, I have two itunes library account one for the PC and one for my Mac, I have my first iphone on my PC, but i just upgrade and I would like to use my new iphone on my Mac but all of my apps and other stuff is in the first library.. How do I put my apps

ok, I have two itunes librarys account, one for my PC and one for my Mac, I use the PC for my iphone, but I upgrade my iphone and all my apps and
stuff is on the first itunes library. How do I put the apps from one iphone to the otherusing two dirffernt itunes library? please help..

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

Two primary registers in one meter for a secondary meter device

Similar Messages

Maybe you are looking for