Two printers need to be maintained for one key combination

Hi Experts,
Requirement:-For one condition record two print out has to be determined on different printers.
As per my understanding we can maintain only one printer for any key combination here as per the requirement if some one has any idea if we can maintain two printers for the same key combination.
Regards,
Dharmesh

Hi,
You cannot assign two printers to one single combination of Condition record.
This functionality is not possible.
regards,
santosh

Similar Messages

Two printers need to be setup for same output type

Dear Experts
How do we create condition records for two different printers in VV61 with same output type and packing material type?
Thanks in advance for your answers.
Regards
Bala

3)
The configuration helps to redetermine the printer.
F1 help for the field:
"Description of print profile
By specifying a print profile, the printers for output processing are redetermined. You can, for example, assign the printers of a specific packing station to a print profile.
Using the parameter "PPT", you can individually define the print profile in the user parameters."
Please note that you also have to maintain the profile for each user.
2)
You have to make yourself familiar with SAP's condition technique.
http://wiki.scn.sap.com/wiki/display/ERPLO/output+determination+using+condition+technique
(You will need a condition table in which one key field is the plant and assign it to the output type through an access sequence)

BEx report -two different calculations for a result for one key figure how?

All,
Maybe someone could help me with the following, we have a requirement to setup for one key figure two calculations for result rows. One result (average) for one level, and on a higher level -grand total have a (sum), as for our business it makes sense to do it this way. We have setup average for this KF, we get correct results (see below values 7,5 & 6,5) however for the grand total (across multiple products) so for one level up we need to have a different calculation. How could we achieve this?
Here is an example:
location     product          inventory
AAAA     11111          5
AAAA     11111          5
AAAA     11111          10
AAAA     11111          10
AAAA     Result          7,5      ---> average
AAAA     22222          5
AAAA     22222          6
AAAA     22222          7
AAAA     22222          8
AAAA     Result          6,5       -
> average
AAAA     Result (across products)          14      ---> here I want to have a sum of averages

This could be achieve only IF you upload a hierarchy for product inventory with different levels, wherein each level show subtotals and finally grand total will be shown at the end of the results.

What are the authorization need to be given for a Key Users in BW?

Can you help me out for this question please.
Thank in advance.
Kay
What are the authorization need to be given for a Key Users in BW?

Hello,
check this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm
you can use the template role to dfine your own roles for Key User: S_RS_RREDE BI Role: Reporting Developer (Development System)
Hope it help
regards

Adobe 9 standard printing two sheets per page but set for one - win7 pro

I have a copy of Adobe 9 Standard on a Windows 7 64 bit OS. Printing from this product results in a "booklet" style output with two pages per sheet. All options are set for one page for sheet both in Adobe products and in the printer prefs. Has anyone seen this before or have any clue as to where I should look for what I am missing?
Thanks.

Are you using the Adobe PDF printer or PDF Maker. The settings for these two methods are set in different places and that may be the issue.

What types of containers need to be used for one-to-many relationships

While looking at toplink examples, I noticed that synchronized containers only are being used for one-to-many relationships even though it's not required by the documentation.
Is it required?
Also how does merge affect it? I'm gettning concurrent modification exceptions from time to time, while using iterators for containers from these relationships.
Does it mean that I have to use enumeration on vectors only and toplink merge isn't atomic? So there is no isolation when toplink merges the data from unit of work into identity maps?
There is nothing about thread-safety and threading aspects of accessing containers for CollectionMapping based relationships. Please advise.

Non synchronized containers can be used but may require some extra code to handle concurrent access. If you are accessing the objects from the shared cache (not cloned in a UnitOfWork) then you will need to isolate your iteration within a synchronized block, synchronized on the collection itself, or handle the ConncurrentModificationException if they happen rarely.
Because these are shared instances of these collections other threads may be writing to them while they are being read from.
--Gordon

How to obtain data for one key recovery

good morning.
sorry for my bad english but, I'm french....
I have a LENOVO G560 since 3 or 4 years.
I have a probleme with "one key recovery" partition.
I had re-size differents partitions, and I could'nt use one key recovery... I had an error message.
so, I had re-installed windows 7, and now, I 'm looking for data to restore the origin instalation...
Can I found CD or DVD with factory configuration ?
thank you ang good day.

Hi
Welcome to the forums
Since you have resized the partition, one key recovery wont work. You can take a look here but i cannot guarantee that it will work
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/How-to-use-one-key-recovery-after-it-stops-...
If this does not work for you, you will have to order them from lenovo.
Regards
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Help need to generate table table maintainance for one table

Dear SAP Gurus,
Am not a ABAP consultant, currently we have some requirement to maintain some values for custmized table "ZXXXtable", when i checked in SM30 this table is not supporting to maintain.
Now We are trying to gerenate for table maintaince using in SE11 --> Utilties --> Table maintainace Generatore and
but in this screen it is asking function group and packge.
What is this function group and packge,
How to maintain this gunction group and package (or) how can I check for this table function group and package is maintained.
(or) shall we use other function group and package which is already existing in the system.
Please help me to solve this isse.
Thanks & Regards,
MK

Hi PXG,
this is production system we cannot able to create, shall we use the existing one which is already available under same package, I have checked 4 function groups are available in the same packing , but that function groups belongs to some other table or i don't know some other purpose.
Please help to how can i maintain the table with out creating new function group.
First could please explaing what is the use of function group?
Thanks & Regards,
MK

Two sales area data to be maintained for one BP

Hi friends,
We have a scenario where the Prospect can become a sold to party for two different companies having different sales area.
Please suggest how this can be achieved.
We know that this is possible in the SD module in ECC where we can extend the customer to other sales area.
Thanks
AJ

You can proceed in the same manner as in SD. There is an assignement block Sales Area in business partner window.

Two receiver file adapters : Introduce delay for one specific channel

Hi All,
I have two receiver file communication channels and I want to achive the below :
CC1
CC2 are the two comm channels.
They write some data to the target system for which the sequence of writing it may become important and hence i want to ensure that
CC1 creates the file first.
and then CC2 creates the second file.
Is this possible without BPM?
Regards,
Amol

Amol,
Not sure of the exact flow, but if you have multiple Inbound Interfaces in the Interface Determination [One for each file , etc ] and you have selected the Option Maintain Interface Order at Runtime , the Files will be written to the target sequentially.
I have tried this and every time the Time stamp of the file at the OS level was always different and the first file was written after the next one. Ofcourse the amount of seconds of delay is not under our control but if all you need to ensure is the files are created sequentially then this should do the trick.
Regards
Bhavesh

Two profit centers in same plant for one material

Dear All
We have this request from a customer.
There is a material in 1 plant but need to track that same materials in 2 different cost elements depending on where these are used (e.g. for sales will be booked to profit center 1 and demo will be booked to profit center 2)
Now we can partially achieve this by splitting them into 2 storage locations however this will only give a report on quantity and not separate valuation since 1 material can only have 1 profit center per plant. So we can know there are for example 4 sales item in sales storage location and 2 item in demo storage location but we will not know their price valuation as it will show 1 combined value for all 6, and we cannot assume valuation per item to be total divided by 6 because the value for the sales item and demo item need to be different.
Is there a way to achieve this?
We could copy the material to another material with different material number but this is not ideal since it will create problems at the backend when updating material data and also causes duplication which we want to avoid.
Any suggestions on how this can be achieved -- e.g. I am sure most companies have demo units which are separate from delivery units how is this scenario managed in those companies?
Regards
Anant

Hi
Use split valuation. Using Split valuation one material can have multiple valuation prices. In your case you can create two Valuation types (Demo and Sale item) for valuation category say XYZ. Then you can manage different price for Demo and Sale item even if the material is same.
Read below example: If you have same material grade A and grade B. Grade A is $100/Kg and Grade B is $80/Kg. This kind of scenario is possible by using Split Valuation.
Regards,
J.Sankar

Does white need to be transparent for one color t-shirt printing?

Hi,
I made one color (black and white) graphic as an Illustrator file for a guy who is printing it with one color on t-shirts. Some of the white areas are formed from white objects on top of black objects and some are transparent areas like the background that shows when the Show Transparency Grid is selected from the View menu .
The guy told me his printer said that there are white objects in the graphic that need to be transparent.
I don’t have any other information. I don’t know what kind of printing, printer, and t-shirts are used. Initially the guy told me not to worry about that, he will prepare the graphic for print but now he is asking me to turn the whites to transparent. Given the situation, I’m suspecting if this is the right approach.
I would like to learn the right way of doing this and I will greatly appreciate any advice, and input.

If you make a compound path...the artwork will be OK.
That cannot be assumed as true without actually seeing how the artwork is built. In any of these situations, a normal even-odd winding will cause unwanted black reversals:
Difference regions between any white and black fills (for example a white path only partially overlapping a black path).
Intersection regions between two or more white fills.
Intersection regions between two or more black fills.
Without knowing the artwork stack, the most likely "one-size-fits-all" solution would be the Merge Pathfinder. But even that assumes that all paths are filled, unstroked paths; no Brushes, etc.
But as has already been stated, when printing separations or composite, white means "no ink" unless the white is a spot color Swatch. The strange-sounding request from the printer may also be due to white objects being accidently set to overprint.
The surest thing for a beginner not understanding any of the above would be to just rasterize the whole thing to 1-bit at a moderate resolution, assuming it is all line art and is drawn at 100%.
JET

Two Purchase Requisitions created on MRP for one Sales Order

Hi,
A Sales Order has been created with one schedule line and one delivery date. When MRP is run it creates 2 Purchase Requisitions. The material in the Sales Order is a Prepack Material and has a component attached in the BOM. Please advice as to why the order is splitting when MRP is run and also why 2 PR's are created.
Thank you for your help.

Please check in OVZG................assembly type........if u maintained .3 or 4. It may be the reason
Dynamic assembly order ---SAP HELP DOCUMENT
If you create a sales order for a material with the 'assembly processing' technique, the system carries out an availability check for the components needed for the assembly. Depending on the results of the availability check, either one or several procurement elements are created. The quantity for a one-time delivery and/or the next possible deadline for a full delivery and/or a delivery proposal with then ext possible deadline are displayed on the availabililty control screen.

Two entries found in TFS DB for one user, how do I know which one to remvoe?

We had issue with an account that TFS reported to there are multiple users with the same display name. I searched the database and found two entries with the same 'displayname'.
First weird thing is that the account names are only different in some letters with or without capital (exactly "SIvakhno" and "sivakhno"), I thought TFS (and Microsoft) is not capital sensitive, right? Why does it consider the two accounts
are different?
My next question is, if I want to remove one to solve the 'multiple user' issue, which entry should I remove from the database? They have different 'Sid', 'Id', 'AccountName' (as above), 'UniqueUserId' (1 and 0, respectively), 'LastSync', 'SequenceId', all
the other fileds are the same in the table.
Thanks

Hi Peter,
Thanks for your reply.
There’s two users existing in your TFS Server databases, one is Slvakhno and another one is sivakhno, and they have different SID and Login name in your TFS database, right?
What’s the login names of these two users, which one’s Login name is D_Name\sivakhno2, and which one’s Login name is D_Name\sivakhno?
TFS recognize the user using SID value, every user has the unique SID value in AD although they may have the same display name. If the Slvakhno and slvakhno users have different SID value in TFS database, TFS will think they two different users. But you
received the same SID value for the Slvakhno and slvakhno users after executed the tfssecurity /imx command line, that’s an issue in this scenario, please use these two users’ login name value in the tfssecurity /imx command line, then check the SID result
again.
You said it shows the same display name for D_Name\sivakhno2 and D_Name\sivakhno users after execute the tfssecurity /imx command line, which same display name shows in result?
According the D_Name\sivakhno2 False False result, TFS Server think this D_Name\sivakhno2 is not available, please check this D_Name\sivakhno2 user in your AD, ensure it’s available and check its SID value, compare it with value
in database.
For the change user’s display name will affect other AD groups issue, please contact AD experts for the better response.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Two 23" needed - What to look for, what to avoid ?

Hi,
I'm planning to replace my two noname 17" with two ACD 23". They would be powered by a Dual 2,5 which has the Ati Radeon 9600 XT (128 MB VRAM) on board. The main use will be music production with logic, but there is some score, soundtrack and also music dvd authoring work in the pipeline as well.
I've sifted through these forums and am somewhat distracted by all those very diverse experiences.
Some owners seem to be happy, others aren't - but I haven't found a pattern yet ... if there is one. Are there some serial nos to avoid, are there some that seem to be a safe bet ? Did some of you pro display guys figure out some sort of helpful guidelines for getting new 23" in september '05 ? Any hint or help appreciated !
Thanks, uni

Thanks a lot, David. From what I've gathered in here, I should check the production lot there : http://www.chipmunk.nl/klantenservice/applemodel.html . Also read about your spyder thing - that's what you mean, right ? Would a software like supercal from http://www.bergdesign.com/supercal also be sufficient in your eyes (no pun intended) ?

Two printers need to be maintained for one key combination

Similar Messages

Maybe you are looking for