Two problems: hiding key-switch notes and messages to effect-plugins

Hello,
first please apologize my bad (school-) English, which I haven‘t much practiced sind I left school more than 30 yeras ago.
I have got two problems, and I should be grateful, if somebody could give me a hint.
1. I am using sample libraries, which I load in a sampler (Kontakt 2 of Native Instruments) in the instrument slot of Logic. These libraries work with key switches to choose between various articulations of an instrument. Unfortunately these key switching notes appear in the outprints (although the note, good so, does not sound – and isn‘t intended to sound).
Do you know a possibility to set a key switch and let the note hide in the outprint?
(I have also sent a fearture request to apple: creating an additional note line to an instrument, reserved for key switching commands.)
2. I am using Guitar Rig 2 as an effect-plugin in Logic. Guitar Rig is (regarding my puspose) organised in banks which contain various presets (settings of amplifiers, boxes, micros, effects and so on).
Is there in Logic a possibilities to send to effect-plugins commands which choose firstly a bank and secondly a preset in a bank of an effect-plugin in effect-slot?
Thank you for your answer in advance.
Yours sincerely Norbert
iMac Intel, 2GHz   Mac OS X (10.4.8)  

One method:
Let's say you have a flute sound from Kontakt 2...
1. Create a duplicate track for the Kontakt flute instrument in the Arrange window, just below the original track
2. Open your flute region in score or matrix, select the keyswitch notes and CUT them. Then exit the editor
3. Click on the duplicate track in the Arrange window and then use "paste at original position", (not regular CMD-V paste). Now your keyswitch notes are placed on the duplicate track in the exact location they were originally recorded at.
(Note: if this doesn't seem to paste anything (sometimes it happens), hit Undo. Then use the pencil tool to draw a blank region on your duplicate track. With that new region selected, use "paste at original position again" and it will work.)
4. With the new region selected, choose Options > Extended Parameters... a floating window will appear. Look for "Score:" at the bottom of the window. Click to the right of "Score:" so that it now says "Score: Off" for that region. This function works per region. Your keyswitches will still play but they won't be shown in the score. You can even hide this track if you want.
5. Repeat this process for all of your tracks with keyswitch notes in them.

Similar Messages

  • My ipod touch will not switch on and is no longer recognised by itunes.  Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

    My ipod touch will not switch on and is no longer recognized by itunes.  Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
    I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

    For the restore error messages try:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • Problem-Solution: Help! I'm seeing my iCloud account two or more times in Notes and Contacts!

    Problem: Help! I’m seeing my iCloud account two or more times in Notes and Contacts!
    Solution:
    Open [System Preferences] >
    Open [iCloud] >
    Uncheck [Contacts] for each duplicate iCloud you see in Contacts. ex. My iCloud Account is listed three times = uncheck Contacts twice. The checkbox next to Contacts will fill back in again automatically.
    Uncheck [Notes] for each duplicate iCloud account you see in Notes. (same instructions for Contacts; repeat the steps for each duplicate account)
    Why is this happening?
    It has to do with iCloud Keychain. If you set up iCloud keychain on more than one Mac, it appears to duplicate the iCloud account in each respective application once per Mac. (ex. 2 Macs = 1 Duplicate). The good news is that the above fix appears to be permanent and does not reoccur.

    Minor addition:
    I’m setting up a new Mac—how can I avoid this?
    Turn on iCloud in System Preferences (SP)
    When asked if you wish to set up Mail, Contacts, Calendar, Find my Mac, et al., uncheck all boxes, and click Next.
    Check the “Keychain” box first, then check all other boxes except Contacts and Notes.
    Within a few minutes, these boxes will check themselves.

  • From where do we see OSS notes and message errors...

    hi,
    From where do we see OSS notes and message errors details if the error number is provided??
    Thanks & Regards

    *OSS* are online sap support notes. These notes are available online for solving critical problems in sap system.We may use the already existing notes or may add our own quaries.
    In order to apply any OSS note, you have to be authorized by your company and be assigned an OSS ID and password.
    For any SAP standard program modification, you are required to login to OSS and request for a repair program Access key.
    Access the SAP Support Portal:
    *http://service.sap.com/*
    - Keys and Requests
    -- Request license key
    --- Follow the Steps 1 to 5 of the License keys for SAP Business Suite
    Follow this step to obtain the Program Access key:
    Menu Path: System -> Services -> SAP Service (Transaction code OSS1)
    Login in with your OSS ID and Password
    Click the Registration button
    Click Register Object
    Double click R/3 Value Contract
    Fill in the Object Registration for Installation:
    For e.g.
    PGMID/Object/Name: R3TR FUGR MIGO
    SAP release: 46C
    Finished, click the Register button
    Select the Key number and use the Copy and Paste short key to copy the Access key
    You are now able to modify the SAP standard program.
    Finished the modification, do remember to transport it to the production system after all the necessary testing.
    http://www.sap-img.com/basis/what-are-sap-notes.htm
    http://www.sap-img.com/basis/oss-notes.htm
    http://www.sap-img.com/basis/manually-applying-the-oss-note.htm
    Regards,
    Ashok

  • How do I insure my NOTES and Messages are saved and transfered to my new iPhone 6?

    How do I save NOTES and MESSAGES to my iTunes, then transfer to my new iPhone 6?

    I Could walk you through iTunes but it's easier with iCloud. I just got a new 6 from 5s. I would go to settings icloud(5s) and make sure your logged into icloud(Apple ID). Make sure notes are active as in green(settings-iCloud). When you setup you new phone those notes should carry over when you log into your iCloud account. Messages don't carry over from phone to phone with Icloud. I could be wrong but your carrier might Be able to. Through apple is I dont think so PHONE TO PHONE.  Only way I recover those is through my Mac or iPad. If you have another device hooked to the same iCloud then messages should be on your other device. Notes will carry over through icloud though

  • I have some problems with element Panel Label and Message.

    I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
    BEST REGARDS

    You can simply remove the label attribute for the input text on the page.
    sid

  • Updated to MS wednesday, notes and messages have not synced with my Mini mac, contacts, reminders all fine, Any advice please

    Updated to MS wednesday, notes and messages have not synced with my Mini mac, contacts, reminders all fine, Any advice please

    that's worked, thanks wjosten! for some reason the apps weren't checked to sync. Simple solution really that I should have worked out myself! Thank you.

  • Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

    Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

    Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

  • How can I put two beats of normal 16th notes and two beats of triplet 16th notes in the same measure?

    Hello!
    How can I make a measure that has the first two beats as normal 16th notes, then the last two beats as triplet 16th notes? I'm putting the notes straight into the score. Oh, and I'm in 4/4 time.
    Exactly what I did:
    1. Score>Insert>16th note. Put in 8 notes (2 beats)
    2. Score>Insert>triplet 16th note.
    This is when it changes the first two beats. I don't want it to do that.
    Is it impossible to do this in the score?
    Please don't give me an alternate software recommendation.

    I don't have your GarageBand Version any longer, so I cannot check, but with GB'11 and Mac OS X 10.8 I get random results - sometimes it succeeds to  insert triplets in the second half of the measure, sometimes not.
    What I do as a work-around, is to switch to Piano Roll after entering the notes and manually drag and adjust the timing for the triplets.
    Or you could set the signature of your project to 2/4 while you are entering the notes. This will put the triplets and 16th-notes into different measures. Then switch back to 4/4 when you are done.
    Regards
    Léonie
    P.S: I'd love to see a better solution to this ...
    P.P.S: It will change to display "all triplets" while you edit and insert triplets, but it will switch back to the timing you originally inserted, once you deselect triplets again - this is very buggy - the "all triplets" should only happen, when you are previewing your score with "Snap to Grid" enabled.

  • Form of address key  is not defined - Message AM117-VL02N

    I have defined a COA for the customer when there is a PGI for that customer.
    When I do the PGI i am getting update termination error - Form of address key  is not defined.
    As per the message it says that TSAD3T - TITLE is not maintained. But I see the customer master it is maintained as 'Company'.
    Also when I remove the Title using XD02 also i am getting the same message.
    Please let me know what settings and changes i need to do for PGI to happen.

    Hi,
    check in customizing what form has been assigned and check the form. It sound like somebody created a form (SAPscript, Smartforms, Adobe Forms) for the billing document and there´s no window on it for the address or it has another name.

  • Problem related to debit note and GRN

    Hi People
    I am abhishek working as a SAP consultant in a Garment manufacturing firm
    There was a PO made for some threading cones of different size
    for example
    one cone with 100 meter length and second cone with 200 metre length
    in PO ordered qty was in metres
    100 thread cones of 100 metres = 10000 metres
    10 thread cones of 200 metre length  = 2000 mtrs
    total metres is 12000 mtrs
    price per metre is same for both the cones
    now the guy who made the MIGO considered it as all the cones made are of same type and made the GRN as
    110 cones recived  ie 110 * 100 = 11000
    and we sent the vendor a debit note of 1000 mtrs
    all the payment were carried out and the check has been sent to vendor as well
    now the vendor came back and sai he sent all the order in PO correctly 
    what should be done now?
    i dont want to cancle the debit note and invoices and make a grn of remaining 1000 mtrs
    can any one suggest me wht can be done ?

    you have to pay to the vendor. its the mistake from the data entry point of view. either you have to cancel and recreate the entry or you have to pay. that it.

  • Another problem: fan starts running nonstop and messages says to restart

    I recently had my hard drive crash and with help from this forum, I was able to replace the hard drive myself last week. I upgraded to Leopard and all seemed well. Now this has happened 3 times: the fan starts running nonstop and loudly and the computer displays a message that I need to restart my computer. The first time it happened, I restarted and it was okay for a few minutes, then started up again, so I shut it down for the night. The next morning, I reset SMU and it worked all of yesterday with no problems until about midday today, when I heard the fan going again and the same message displayed. I currently have it shut down and unplugged to reset the SMU yet again, but am wondering if this is a symptom of more serious problems?
    The power supply was replaced a little over a year ago at a local Apple store. Of course, my AppleCare ran out about a month ago. I was really hoping to get another year or two out of this machine with the new hard drive! When I verified the hard drive yesterday, Disk Utility said it was fine. Are there any other troubleshooting things I can do? Thanks for any help with this.

    Thanks (once again) for the help! That's a great web site. So far I have run Apple Hardware Test and it says no problems. I verified the disk and it says it appears to be okay. I repaired disk permissions and it did find a couple that it repaired. There were also several SUID files it said would not be repaired, but I found an article that said these warnings can be ignored. I will keep my fingers crossed that the disk permissions repair will help. Otherwise, I will call Apple and see if they will do anything for me. It doesn't seem like it is the power supply again, I'm having totally different symptoms...but who knows? I don't think I will put any more money into this Mac. I would probably buy a new one, but I sure would like to delay it for a year or two, if possible. When it's working okay, this computer is still more than adequate for everything I do.

  • Mail-to-Mail scenario - Problem with comm. channel not reading message

    Good day,
    I am setting up a Mail-to-Mail scenario, where a received e-mail with an attachment is both processed into a file, as well as a monitoring e-mail needs to be send. The attachment processing is an existing process and is still working properly, but my e-mail isn't send. I am using Java mapping to create the destination e-mail based on the source e-mail. Everything is set up in the Directory as well, and through the Test Configuration feature I have tested my new addition to the existing process, I am seeing the result that I am expecting. I have sent a test message and XI picks it up just fine and processes it which is tested by both SXMB_MONI and the resulting file from the attachment.
    However, the monitoring e-mail is not sent. Using the runtime workbench, there is an error in the receiver communication channel, being the following error from the Audit Log:
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.util.XMLScanException: java.lang.NullPointerException; nested exception caused by: java.io.IOException: Parsing an empty source. Root element expected!
    Looking through the Message Content, I notice there is a SOAP document describing the source message and two payloads. The first payload being the source message in XML format, the second payload is entirely empty. I suspect this empty second payload is causing the NullPointerException, but I am at a loss as to why the payload is empty. The Test Configuration showed me that the message gets through just fine, so what is going wrong?
    Here is a link to the configuration of the communication channel, maybe something is wrong here: [Config of communication channel|http://roald.hoolwerf.net/images/cc-config.png]
    My question is: What can I do to find what is causing the communication channel to receive an empty payload, and how can I solve this?
    Searching for this issue, or the given error on both Google as these forums hasn't given any related posts, if I did miss them in that case I am sorry for posting and please refer to the related topics.
    Thank you in advance for taking time to look at this question.
    Kind regards,
    Roald Hoolwerf
    Edited by: Roald Hoolwerf on Feb 1, 2010 3:57 PM

    Try this.
    Unchecked  the configure use authentication.
    and use mail package (base64)

  • Two problems : areaChart along with Line and double y-axis in LineChart

    Hi Friends,
    This forum is very useful as we are getting lots of help from people who are trying out this new technology and giving/using help to/from others.I am developing a real time application in JavaFx in which I need to implement Charts using dynamic data coming from a server.
    Now I am facing two types of problem which may be interrelated in some way.
    Problem 1 :
    I need to combine an areachart along with a line Chart.There is nothing in JavaFx like area-line Chart so should i go with all area charts and make the fill-color of area series transparent(is it possible to have transparent fill in area-chart ? by css ?) OR i should stack two charts one area and one line on top of one another making the background of either transparent(once again is it possible to have transparent background for a chart so that background chart/series is visible ?) OR any other suggestion ? Anyways I tried stacking using stackPane and it turned out to be ugly combination of misaligned charts :-(
    Problem 2 :
    I need to put two y-axis(i.e secondary axis) on the same chart but i am unable to find such feature with my best efforts.I know I can set the side of Axis using setSide method of Axis class but how can i put it both side simultaneously.Also is there a way to put different scales on these axis ? I mean is it possible to have two different series with drastic difference in bounds(data range) to be put on same chart by attaching them to different Y-axis on the same chart ?

    I don't think there is anything in the JavaFX library which matches exactly what you need.
    You might be able to use some tips from the 3d pie chart I created at: https://gist.github.com/1485144. This demonstrates stacking multiple charts on top of each other, whilst removing rendundant details so it doesn't end up a jumbled mess and looking up items by their css tags and modifying them.
    There is now excellent documentation on chart css at http://docs.oracle.com/javafx/2.0/charts/css-styles.htm#CIHGIAGE. If this doesn't get you all of the css hooks you need to dig out the details required from the chart, then you can unpack jfxrt.jar and search for caspian.css or you can recursively print the nodes in the chart which will tell you the type and style of each node. Armed with this information you could should then be able to stack the two charts you created on top of each other, align them correctly and strip away the info you don't need. To get the second y axis to the other side of the chart you could look it up by css in code, then do a translateX on it to so that it is translated by a bind to the width of the x axis. Seems doable, if a little fiddly.
    You might be tempted to directly create an Axis yourself by creating an instance of http://docs.oracle.com/javafx/2.0/api/javafx/scene/chart/NumberAxis.html and laying it over your chart, but I was unable to get that to work (http://javafx-jira.kenai.com/browse/RT-18270) - even if you did so, you would have to manually set up the ranges and ticks as the chart library wouldn't handle that for you. Another way to create a Axis like thing is by creating a http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Slider.html, disabling user input on it and removing it's thumb via css.
    My efforts at answering chart questions in the past sometimes ended up as "That's not what I need": Re: How to create PieChart like this?
    Questions about charts are hard to answer without a link to an exact image of what the required chart is expected to look like.

  • I have two problems. One with LTE and another with iCloud terms and conditions.

    I haven't had some of the bigger problems with the 6 as some. But I am having two issues that are getting annoying. One is a pop up every 5-10 minutes that says I cannot use icloud without accepting terms and conditions. However it won't let me accept any. The other is lte is not working on my phone, but is fine with my husbands. Any ideas? Thanks!

    klawson88 wrote:
    I have 3 classes fully defined: GameWindow(extends JFrame...parameter: FileLoader f) NumberOfPlayersDialog (extends JDialog and implements ActionListener...parameter: GameWindow g), PlayerRollDialog(extends JDialog and implements ActionListener...parameters: GameWindow g and NumberOfPlayersDialog n).Word of advice: avoid having your GUI classes implement Listener interfaces as this makes for the creation of [low cohesion classes,|http://en.wikipedia.org/wiki/Cohesion_%28computer_science%29] and this is a "Bad Thing".
    PlayerRollDialog has one button that has an action listener. The user rolls dice for several player objects by pressing the button and the result (which player object has the highest roll) is displayed on the screen. At that point, the button text changes to "Start Game!". What I WANT to do is have a subsequent click on the button close the dialog (to reveal the gameWin underneath). Is it possible to do this? Wouldn't this require two actionPerformed for one event? No, you could do this with a single ActionListener. You will change the button's text and possibly its actionCommand String. Simply query the button for its text and perform the appropriate action based on this.
    How can I implement a second actionPerformed for the same event?Again, you don't need to do this.
    My second problem is that I want to be able to close the entire program if the user exits out of either dialog without performing an action (clicking on the X button). I try specifying EXIT_ON_CLOSE as their default close operations, but it can't compile. It gives me:Yeah, you can't do that. You can give the classes that hold the dialog a state, say exitOK, and initialize it to false. If the proper buttons were pressed you would change exitOK to true. Then after the dialogs have closed you could then use a public getter, isExitOK(), to check this state and then have your GUI behave accordingly. These dialogs are model, correct?

Maybe you are looking for