Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Similar Messages

Premiere pro cc 2014 problems with audio

I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
Anyone else experience the same problems?

Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

Problems with audio panning.

Am having problems with audio tracks. For example: when capturing a clip where a person is talking, there would be 2 tracks of audio - one a radio mic (Track 1) and another mic (Tack 2)capturing ambient sound. I often delete the ambient track (Track 2) and am left with the the main audio from a radio mic (Track 1).
The problem is when I open up the main audio track (Track 1) and pan the audio track from -1 to 0 or even to +1! It says it has done it but the sound still comes out of the left speaker.
It is a very recent problem that I wonder may be something to do with preferences or settings.
We have had no problems with the speakers at all.
Thanks very much,
Geoff

You have your audio outputs set to 'dual mono', not 'stereo'.... go to:
Sequence>Settings> 'Audio Outputs' tab > then highlight the 'Stereo' button, then click OK...
problem solved...

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I am experiencing two problems with iTunes on my iPhone 5s.

I am experiencing two problems with iTunes on my iPhone 5s.
Issue 1: iTunes Match
Some song playback is merging songs. I select “Song A” to be played and midway through the song it begins playing “Song B” however when I look at my phone it indicates that “Song A” is still playing even though the actual music is not “Song A”. I searched the Apple Support Community as well as the internet and this seems to be an ongoing issue back to 2012 that has not been resolved. All of the “fixes” that are provided do not work. For example, update/sync iTunes Match, delete the song from your iPhone and re-download from the cloud or delete the song from your iTunes including the iCloud and re-download. None of which worked. I even tried to complete erase the song from my computer hard drive and restarted my computer and then re-downloaded the song and it was still not working.
Issue 2: iTunes Preview Track
I am unable to preview any music on iTunes through the iTunes app on my phone. I have signed out of my user ID and restarted my phone and then logged back in and it did not fix the problem. My iTunes Match and iTunes radio are allowing me to play music. My software is up-to-date.

Same problem here, Im running the latest version of iOS 7 on my iphone 5S (ipod 5S) bricked lol. It was working fine and then a mates baby grabbed my phone and dropped it (not very high) then it went off so i turned it on and BAM i got the grey backround with the apple logo on it so, I waited, Then it went to BSOD and got stuck in that loop, I then done a manual reset I was able to turn it off thats all. I tried restore in recovery mode with the latest itunes it come up with Unknown Error, error code (14) (something to do with unreconizable USB) tried many diffrent USB ports but sadly nothing, I then tried DFU mode with itunes still not working. Im really stuck on this one I need some assitance PLEASE! HELP!
No aftermarket apps on iphone 5s
Latest iOS 7 on iphone 5s
Latest itunes 11.1.5.5
Running Windows 7 (good comp)

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Two problems with the newly implemented WF in UWL

Hi all:
       Finally I could see WF of leave request in UWL , but there seems to be two problems with it.
       The first is workitems disappear very slowly, for example , when approve it, the workitem would disappear at once at backend, however, workitems would disppear in five minutes.
       the second is for example employee A submits 5 five applications (just for example ), as click one workitem, five applications would appear the application list .
      could you please kindly give some suggestoins ?

Hi,
reduce "Default Cache Validity" value to 1 from Universal Worklist Service Configuration link under System Administration -> System Configuration -> Universal Worklist.
you can configure deltapullmechanism also.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
Regards,
Koti Reddy

Two Problems with iPod Nano!

Hi Community!
As I have already written in the topic, I've got two problems with my new iPod Nano:
1) I charged the iPod over USB 2 and my dockingstation already about five hours, but the red sign and the message that I don't have to disconnect my iPod is still there (battery status shows full)
2) With the docked iPod my computer doesn't boot anymore. When I disconnect the iPod it works :-/
THX for helping me!
dynAdZ

Thank you for helping me with my problems, but I still don't know why my iPod gives me this message, altough it is fully charged. And the flashing warning symbol drives me nuts
Mhh I didn't find an image for that symbol... It's a red circle which is crossed. The manual says that there should now be a green symbol, or just the menu...??

Two problems with kernel26-2.6.39.1-1

hi,
I just upgraded system, and i found two problems with kernel26-2.6.39.1-1
first one is that i cannot use "reboot", the screen was black.
second, i cannot use " openconnect" to connect the vpn. and the error is
CSTP connected. DPD 30, Keepalive 20
Error: either "to" is duplicate, or "ipid" is a garbage.
Connected tun0 as XXX.XXX.XXX.XXX, using SSL
Continuing in background; pid 1661
DTLS handshake failed: 2
after i downgraded the kernel to kernel26-2.6.38.8-1, both problems were solved. so, i think, there should be something wrong with kernel26-2.6.39.1-1

thanks for replies.
" poweroff" was ok. but "reboot" didnt work (kernel26-2.6.39.1-1).
after i run "reboot",
the xorg was first killed,
then some words showed on the screen line by line,
finally, as far as i remenber, it stopped at "waiting for XXXXXX" or "XXXXXsignalXXXX".
im sorry i forget the exact words. but i think they are the last words we can see if we run "reboot"

Two problems with SB X-Fi

Hello I have two problems with my music card (Sound Blaster X-Fi usb). I have home theater (Laffayete AV2000) and columns with SB squeak and central column don"t work. I have update all drivers i dont now what i can do
Mys pc is Asus G73JH A, Windows 7 64bit

Sorry I don't really quite understand what you are trying to say. But you can try the following method to determine if there is something wrong with the X-Fi Surround 5..
1. Disconnect your speakers system, then connect a pair of earphones to the front, rear, c/sub ports.You can use a Y-Splitter for the Left & Right RCA connectors so that you can connect the earphones.
2. Play a music file and listen for any squeaking noise.
3. Repeat this for the rear and c/sub ports.
If you think there is anything wrong with the usb sound card, please feel free to write to our customer support.

Two problems with iTunes (permissions issue?)

Hello,
I have two problems with iTunes. I am not sure if they are related that's why I post them both.
1) iTunes doesn't delete apps after updating them anymore. This is happening since the (two?) last versions of iTunes and is the same with 10.5. The reason seems to be the permissions of the apps. Nearly all have "everyone = custom". Therefore I have to enter my admin password when I try to delete them manually. And iTunes itself cannot delete them on its own, of course. Why is this happening? Why is iTunes assigning such permissions to downloaded apps?
2) I can't login to my account from within iTunes anymore. That is also happening since quite a while. I am logged in (my ID is shown in the top right of the store) but cannot access my account details. iTunes asks for my password but after entering it the login mask appears again. It's not the password itself, it is correct.
Any suggestions?

Correct answer to find here:
https://discussions.apple.com/thread/1215039?start=0&tstart=0

Two problems with custom kernel

I get two problems with my custom kernel that is not using initrd and otherwise working fine:
1) initscripts does not print anything, i.e., I see the kernel messages and after a short while the login prompt. It seems to start the daemons, however, since my network is working. During shutdown the printout is working as usual.
2) the machine does not power off properly (just hangs/stops after saying that is now powers off).
I am missing some kernel options? Or do I have to configure something differently for not having an initrd?
Thanks, CC

ccom wrote:I now re-compiled with Arch Linux's default settings (except for SCSI, SATA, and filesystem drivers built in) and noinitrd in GRUB. I get the same two problems. What is initrd doing that I missed?
how about display drivers? are you compiling them in the kernel or as external modules?

I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup 2. Randomly disconnects from network. Any help will be greatly appreciated.

I have two problems with my 2012 13” MacBook Pro.
Gray screen shows at startup
Randomly disconnects from network.
Any help will be greatly appreciated.

First, open Terminal in your Utilities folder and paste this into the prompt line:
sudo update_dyld_shared_cache
Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
Next, boot the computer into Safe Mode.
Next, do the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I've two problems with my 3000C100 laptop.

I’m having two problems with my Lenovo 3000C100 laptop.
1- The battery is dropping to 6% from 95% and
2- The screen is having over contrast. (Therefore the quality of photos is not good)
I’ve set the brightness to the lowest value. The backlight of the screen flicker sometimes.
is it possible to resolve?
clickout.110mb.com

26-Sep-2008 10:40 AM
solo2_2 wrote:
1st sometimes I can even play videos the phone simply reboots.
2nd When i listening to slow songs theres a pop sound coming out its speaker but when i listen it in headset there is no pop sound.
U got any solution for it.
With the latest firmware v8.30
1. The rebooting problem was fixed, but there is still some problems with it though.
2. It was already cleaned up, but many questions arise regarding the sound quality coming both from headset and the loudspeaker.

Two problems with audio clips

Similar Messages

Maybe you are looking for