Two Problems with iPod Nano!

Hi Community!
As I have already written in the topic, I've got two problems with my new iPod Nano:
1) I charged the iPod over USB 2 and my dockingstation already about five hours, but the red sign and the message that I don't have to disconnect my iPod is still there (battery status shows full)
2) With the docked iPod my computer doesn't boot anymore. When I disconnect the iPod it works :-/
THX for helping me!
dynAdZ

Thank you for helping me with my problems, but I still don't know why my iPod gives me this message, altough it is fully charged. And the flashing warning symbol drives me nuts
Mhh I didn't find an image for that symbol... It's a red circle which is crossed. The manual says that there should now be a green symbol, or just the menu...??

Similar Messages

  • Problem with ipod nano when i sync my contacts and calendr

    I have two problem with my ipod nano when i sync my contacts and calendars.
    For the calendars I use the thunderbird Mozilla calendar (that I export in .vcs) but the problem is that the appointment appear in my ipod with a different time: 18:00 on Mozilla become 16:00 in Ipod... Note that both (ipod and Mozilla Calendar) are configured with time zone in Paris.
    For the Contact I have all in Thunderbird contact. The problem is that his software can't export the contact in vcard format (only in csv). Do you know a free software to convert my contact from Thunderbird to vcard format ?
    Thanks in advance.

    On the phone, go to Settings>Mail, Contacts, Calendars select the account you want and scroll down to the settings for Contacts.  You can change display and sort order there.
    Matt

  • Problems with iPod Nano 6th Gen Playback & Updating

    Hi. I have had a look and can't find another post on this - apologies if I have missed it!
    My problems start before I purchased my new Nano 16GB last week.
    When the last update of iTunes came available, I was unable to install it. The task bar would get to about 50% (although it varied) and would then time out. When I had this problem I tried everything from every forum imaginable, from deleting all Temp files, disabling the firewall and all start up applications and clearing the registry – everything. Nothing worked. Eventually I decided that I should uninstall, then install the new version.
    After a week of the same problems trying to install iTunes, I gave up and downloaded on another computer, and saved the .exe file to a USB stick. This worked until two days after I downloaded it, yet another update came out and I had to start all over again (I didn’t – I am running on 10.1.2.17 still).
    I was concerned when I purchased my new Nano that I would have problems connecting it to iTunes as I was not running the new version – but it was okay. Unfortunately, the iPod requires update 1.1 and I am also having the same problem with this – I get time out error 3259 after sometime trying to download it. And yes, I have tried all the same tricks, but nothing seems to work.
    I am running Vista on a Dell PC, and connect to the internet on a pre-pay internet USB dongle. I can download updates for other programmes, and other files successfully – it is only iTunes that I am having an issue with. ITunes is added to my list of accepted programmes on my firewall, but I disable that when I am downloading.
    Meanwhile! My new iPod is fantastic. Unfortunately I am experiencing an odd problem with it, and cannot seem to find other people with the same issue. The memory is not overloaded (it has 1.10GB of free space on it). I have 1857 tracks on it, and 14 podcasts. I play the music files through the ‘Songs’ menu, on Shuffle mode. For some reason, after playing one or two tracks, it doesn’t seem to want to play the next one. The track will be displayed on the screen, but it does not play. When you look at the song progress bar, it shows that it is part way through the song, but it is not moving. I have tried pressing ‘Pause’ followed by ‘Play’ and nothing happens.
    The only way to get it to start playing again is to skip to the next track, but even this has its issues. Sometimes, when you skip forward a track, it plays a completely different track to the one that is displayed. When you look at the progress bar for the song it is showing, it isn’t moving, but music is still coming out!
    Does anyone have any idea what the issue is, and how I can get the machine to play continuously without having to handle it several times? Please?!

    Hi dianak22!
    I have an article here that can help you troubleshoot to resolve this issue:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    You can also walk through the steps of troubleshooting using the troubleshooting assistant, which can be found here:
    Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • New Problems with IPod nano - crackle and clicking

    Hi,
    I got the IPod nano (2GB) a view weeks ago. I haven't changed anything - only copied mp3 songs and photos on it.
    Today suddenly during jogging the nano starts to crackle and click - like an old analog tape. This didn't stop any more even after a lot of resets. I have connected my IPod with USB-2 onto my computer and recharged the accu completely. After disconnecting properly the problem is still the same. Also the buttons and the wheel don't work correctly anymore. Has anybody similar experiences? It seems apple has big trouble and problems with this new product. Maybe the IPod nano isn't fully well-engineered jet.
    I am looking forward for your help and suggestions.
    Thanks in advance!
    Your Stephan

    Hi Mike,
    and what did you do finally?
    Did you bring the Ipod back to
    your dealer for an exchange?
    My IPod didn't get wet during
    jogging I have carefully kept an
    eye on it.
    Is this a general problem with the IPod
    or only with some units?
    Thanks
    Stephan

  • Problem with ipod nano updater

    Hi.
    I have the other problem with my ipod nano. I reset my software ipod nano, but ipod updater 2006-01-10 write:"iPod Updater 2006-01-10 cannot continue because there are other applications using iPod. Please close all iPod applications andtry again.". But I don´t using other applications, iTunes is closed. I try my iPod update on other computer, but text is same. Can you help me please?
    iPod is correct only as external disk. Thank you.

    Hi,
    I'm on a Mac so things may not work the same. Have you tried restarting your computer? If you do that maybe nothing will be using it at first.
    I hope someone who knows Windows will come to help you.
    Regards,
    Colin R.

  • Serious Problem With iPod Nano/iTunes...

    Hello all.
    2 Months ago, I upgraded from a Dell Dimension 2800 to a 5100. I was using an iPod Shuffle. Upon connecting the device to my new computer, it would come up with 'iTunes cannot recognize the iPod' and so on. When trying to Restore Factory Settings, the process could not be completed. The Shuffle ended up breaking and was replaced by Apple. It still doesn't work in my computer.
    I now have an iPod Nano, although the same problem occurs. I have reformatted my hard-drive several times, and have tested just the iPod with nothing else on the computer. Still the same problems. My USB Drives work fine, and Mass Storage works fine before installing iTunes and the iPod software. I am guessing that the iPod has corrupted my USB Drivers or something like that. I have followed all the help topics - they do not work. Both the Shuffle and the Nano work on other computers.
    I know several people who have the same problem. I would like to know if anyone else has the same problem, and has any idea how to solve it?

    Hello all.
    2 Months ago, I upgraded from a Dell Dimension 2800 to a 5100. I was using an iPod Shuffle. Upon connecting the device to my new computer, it would come up with 'iTunes cannot recognize the iPod' and so on. When trying to Restore Factory Settings, the process could not be completed. The Shuffle ended up breaking and was replaced by Apple. It still doesn't work in my computer.
    I now have an iPod Nano, although the same problem occurs. I have reformatted my hard-drive several times, and have tested just the iPod with nothing else on the computer. Still the same problems. My USB Drives work fine, and Mass Storage works fine before installing iTunes and the iPod software. I am guessing that the iPod has corrupted my USB Drivers or something like that. I have followed all the help topics - they do not work. Both the Shuffle and the Nano work on other computers.
    I know several people who have the same problem. I would like to know if anyone else has the same problem, and has any idea how to solve it?

  • Problems with iPod Nano 2G after a rainy day

    Yep comrades, sh*t happens.
    Today it was a very rainy day and a friend of mine was cycling to the school comfortably with his iPod Nano.
    <skip>
    After coming to school, his iPod goes on but the display is completely white (background lights going perfectly) and it doesn't play the music.
    Switching the iPod to PC bring the lil' nano not to its life back.
    please help, my friend loves his nano 2g

    I assume you're saying your friend's iPod got wet during his rainy day cycling. Assuming the problem is due to water damage your friend can try letting it "dry" for several days without turning it on then seeing if they have any success. Also try going through the 5 R's. If it is indeed water damage then it's not covered under warranty, in which case your friend would either have to go through 3rd party means to see if it can be repaired or purchase a new iPod.

  • Have you been having problems with ipod nano 3rd gen?

    Have you been having problems with your ipod nano 3rd gen? got a windows xp computer? is your pc not recognizing it? I think i may have the solution. After 2 2 hour calls to apple tech support they were stumped. we reset it again and again, reinstalled itunes again and again. and they had no solution for me. I went to my device managerand there was a device called (apple Ipod USB driver) with a yellow exclamation point. I tried updating driver but to no avail. I tried uninstalling and reinstalling and nothing. But then I had an epiphany. I went to the device manager right clicked the apple ipod usb device clicked properties then update driver. Hardware wizard went up and I chose not to install automatically. and i chose to install driver manually. and then I installed a generic usb mass storage driver in its place and presto!!! it worked! it was instantly recognized by itunes and it took me to the registration page. I did what the apple support team wasn't able to do for 4 hours. I wonder if they're accepting applications... Anyway i hope this helps anyone out there cause i know i went through a lot of stress.

    the driver is just a regular usb mass storage driver. it's in your computer. it's just a matter of installing it manually where it saya to include the location of the driver click browse and choose c:\windows\system32

  • Problems with ipod nano world clock...

    i bought my ipod nano yesterday... and i cant get the clock working properly... everything is ok... i mean i select the time zone put my local time add a clock from a city in south america (that has 2 hours of difference) i am in miami FL, USA and i select the time zone and all that and put the time and add that city and it works ok the time is right... but when i plug the ipod to the pc the clock completely desconfigurates.... and the time from that city is wrong... is or 3 hours of diference or 1 hours of diference and so on.. it never stays exactly as how i put it... someone can help me??

    dear kiran,
    well i got my nano just a week back and all looks fine.since its paper thin and very delicate you have to take good care of it in handling.the piece looks cute and has a very good sound quality .i have already downloaded songs and around 50 pics.pics show out decent.just one thing to remember dont remove the inner transparent covering on the nano to protect your screen and body.as of now i am pleased with my nano.
    regards
    nath

  • Recording problems with ipod nano - too many voices reading audiobook

    I have tried listening to two audiobookks on my ipod nano (6G) but the reader's voice  is subject to an identical part-second later echo which makes it all but impossible to understand what he is saying - any suggestions as to the cause of this fault and (hopefully) how to remedy it - thanks,        Peter

    "I'm posting this message hoping that an Apple employee will read it."
    Unlikely.
    Use this form.
    iPod Feedback.

  • Using two computers with ipod nano

    My Son has an Ipod nano and received a gift card for Christmas. He has music on his Ipod from our home computer.
    Our home computer has slow internet service so we went to his Dad's work to use the gift card on his computer that has a much faster internet. When my son purchased music from Itunes and put then on his Ipod all the music he had previously on it was gone and he was left with only the new purchase he made. When he got back home he went into Itunes to put his old music on and the new music went away. Is there a way I can get what's on our home computer and what's on his dad's work computer onto his Ipod. Thanks you in advance!!

    The short answer is yes, it's possible.
    Have him start by getting all of the songs from home on his iPod and then with the iPod still connected go into the edit menu and then click on Preferences at the end of the list, it should come up to the music tab for the connected nano. Change the settings so that the music is managed manually. This will stop iTunes from automatically updating the nano as soon as it's connected.
    At this point the home computer should be set, then at the work computer when he attaches the iPod it should come up and show a message box saying something about the fact that the iPod is using a library on another computer and it will ask if you want to transfer to the current computer, say no to that, and then go into the iTunes preferences again and set it to manual just like the home computer.
    Once that's all done he'll be able to drag the purchased songs from the work computer's library onto his nano without having any of his existing music go away.

  • Any one had problems with IPOD Nano getting wet from sweating while exercising. It will kill your Ipod so beware.

    Ipod nano will stop operating if it gets wet from sweating while exercising. Beware, sweat will kill your nano and apple will not cover it under warranty. So don't let it get wet.

    Sweat bands works!

  • Massive problems with ipod nano

    well ive had my ipod nano for about one month and just last night i tried to tunr it off and it wouldnt so i tried turning it off over and over again and at about 11:30 pm which was my last attempt before i went to bed it the screed just like cracked and i am very confused in what im sopused to do do i try to redem the warranty or do i ago for service or do i buy another ipod because i need my ipod for tomorow or better do i buy another mp3? plz help

    Since you cracked the screen, it's probably history.
    Time to buy a new one.

  • Assorted Problems with iPod Nano 4th gen and iTunes

    So i am currently experiencing several problems. Let me break it down so that it might help you understand what's going on.
    #1 When dragging music files to my ipod in itunes, an error message popped up stating some sort of file reading/writing error, i forgot exactly what it said.
    #2 iPod starts randomly reseting itself when it changes to a new song. sometimes reseting itself right after the main menu comes back up. It also does this while connected to my JVC KD-AVX44 stereo in my car via USB and while listening normally by headphones.
    #3 I tried restoring it in itunes, after the restore software was downloaded, an error message appeared stating that the ipod could not be restored.
    #4 itunes begins to not recognize iPod
    #5 itunes freezed when brought up, still not recognizing the ipod.
    #6 itunes crashes? It came up with a window asking for an itunes library to continue, selected just "my music" instead, no files labeled .itl in that. clicked cancel, itunes dosn't come back up.
    I'm hoping there's something simple that i'm missing here, can anyone help?

    I think i'll try reinstalling itunes tonight, i tried using some of the tips in these articles to reinstall my usb drivers etc, as i still can't get my ipod to restore. apple store will be the next step.
    http://support.apple.com/kb/TS1372
    http://support.apple.com/kb/TS1539
    http://support.apple.com/kb/TS1538
    Also, (common question) what's the easiest way to get music into your itunes library automatically if downloading from another source. i just dragged all my previous music from "my music" when i got the nano, i'd just been using WMP before. and i can't seem to find a way to automatically have itunes pick up this stuff. kind of a pain in the behind to drag it all.

  • Problems with ipod nano 6

    I haven't used my ipod for a long time( maybe  half a year),
    when i tried to start it again, it shows "connect to Itunes" on the screen,
    once i connected to the Itunes, it started to ask me to recover it with a backup, i couldn't find where is my backup for ipod.
    And then i tried to restore it, however, it can't even be restore to the factory settings and it shows something like" one of your ipod program is being used" etc.
    Plz HELP ME HERE.
    Thank you very much!

    sorry, i haven came across this type of problem,cant help

Maybe you are looking for

  • Upload Purchase order text  using BDC  while updating Material Master MM02

    Hi All, Please help me out with sample code upload PO Txt ( long text...which is more than 72 chars)using MM02. Its very urgent I am not able to pass data into following fields seen in recording, RSTXT-TXLINE(02), RSTXT-TXLINE(03), RSTXT-TXLINE(04),

  • Oracle XE license trade mark

    Hi guys, I read a lot of threads regarding the XE (+apex + listener) license and I think/hope I understood it correctly. Seems like XE has a license that is free and you are able to use the DB for production products. In that license you have apex an

  • Interest for a lessons learned information page?

    Hi all. I just want to know if there is any interest in a lessons learned information in the wiki pages. Idea is to enlighten security minded persons of some of the security holes there are in the system. However, there is a backside to it and that i

  • HsvWebSessionWSP.dll possible dependencies for regsrv32 sucess

    I am trying to register the dll in regsrv32 regsvr32 command E: \ Oracle \ Middleware \ EPMSystem11R1 \ products \ FinancialManagement \ WebServices \ HsvWebSessionWSP.dll the resulto is an error: The module E: \ Oracle \ Middleware \ EPMSystem11R1 \

  • Photoshop CS6 healing brush tool wont work

    So neither the healing brush tool, nor the spot healing brush tool wont work properly. It looks good, until you let it go. Then all it does is smudge (photos attached)