Two Problems with Moto Droid--tips please!!

So, I've had my Motorola Droid for about two months now and I love it! However, two problems have cropped up recently and I'm getting a bit frustrated.
1) Pictures WILL NOT upload to Facebook anymore. It tries and then I get an error message. I have tried turning the phone off and back on, that didn't work. I have not been able to upload pics for several weeks now. I tried to uninstall the Facebook app and reinstall it just now, but it wouldn't even uninstall. Any advice, please?
2) Every once in awhile, it will show the battery as extremely low and be telling me to plug in the charger. Each time I had not used my phone barely at all, so there would be absolutely no reason for the battery to be dying. But when I turn the phone off so it won't completely die and then turn it back on once I connect the charger, the battery is back to being full charge. So now I can fix it every time by powering off and powering back on, but this is still annoying and I'm pretty sure it shouldn't be happening.
Any help would be greatly appreciated! =)

Thanks, but this is a situation where I am NOT running out all the battery--I will have a full charge one minute and the next it will show it as completely depleted. But if I just turn the phone off and then back on, the battery shows up as fully charged even if it's not on the charger. It's not really causing a major problem, it's just really annoying because restarting your phone is not exactly a 5-second process.

Similar Messages

I'm experiencing 2 problems with my Droid X. Please advise.

Now, these issues may be with Verizon. Well, one of them maybe. But the other is with my Droid X. So, I'm determining if I need to send it back and get a new one. Forgive me if they've been answered, I didn't see them when I was searching.
Problem 1 - Whenever I connect a USB cord from my PC to my Droid X, the Droid X automatically reboots. Is this a setting issue, cord issue, or what? I guess I have tried from different cords, and the problem doesn't happen often, if ever. But it does happen. But at work, it happens everytime I connect the cord.
Problem 2 - Whenever the phone does reboot, or I turn it off for the night, the first phone call I place in the morning does not connect on my end. I do not hear it ringing, but I see it has connected. The party I am dialing receives the call, but they only hear dead air.
Can anyone advise if maybe these are problems with firmware 2.3.3.340 or if this is a problem with solely my phone, and what I can do to alleviate these issues?
Thanks in advance,
- Scott.

Download and install Motorola_Mobile_Drivers_4.7.1_MotoConnect_1.1.31.exe from http://www.mediafire.com/?yg3q3xgajgbh6w6http://www.mediafire.com/?yg3q3xgajgbh6w6]Motorola_Mobile_Drivers_4.7.1_MotoConnect_1.1.31.exe[/url],because the new version removed this option...
Once the installation has completed you can go into your Control Panel/Programs and Features area and uninstall JUST the MotoConnect application from the list and leave the drivers installed.
This should install all drivers needed to the system without having the MotoConnect app installed and you should be able to access card without issues and copy any type of file you want to the sd card.
Follow installation process listed above and then follow instruction here.
It appears that the main issue that cause the driver loading issue is a conflicting driver already installed at time the correct driver is loaded but the old driver wasnt being uninstall automatically, if you or any one run into this issue again the trick is to open the Motorola Driver Installer.exe that is in startmenu under Motorola folder and select the "CLEAN AND REINSTALL" option from app and select start and all old drivers will uninstall and the correct drivers will be loaded... I was able to duplicate the driver install issue twice and both times I was able to fix with these instructions..
Hope this resolves user driver and SD Card access installation issue

I am experiencing two problems with iTunes on my iPhone 5s.

I am experiencing two problems with iTunes on my iPhone 5s.
Issue 1: iTunes Match
Some song playback is merging songs. I select “Song A” to be played and midway through the song it begins playing “Song B” however when I look at my phone it indicates that “Song A” is still playing even though the actual music is not “Song A”. I searched the Apple Support Community as well as the internet and this seems to be an ongoing issue back to 2012 that has not been resolved. All of the “fixes” that are provided do not work. For example, update/sync iTunes Match, delete the song from your iPhone and re-download from the cloud or delete the song from your iTunes including the iCloud and re-download. None of which worked. I even tried to complete erase the song from my computer hard drive and restarted my computer and then re-downloaded the song and it was still not working.
Issue 2: iTunes Preview Track
I am unable to preview any music on iTunes through the iTunes app on my phone. I have signed out of my user ID and restarted my phone and then logged back in and it did not fix the problem. My iTunes Match and iTunes radio are allowing me to play music. My software is up-to-date.

Same problem here, Im running the latest version of iOS 7 on my iphone 5S (ipod 5S) bricked lol. It was working fine and then a mates baby grabbed my phone and dropped it (not very high) then it went off so i turned it on and BAM i got the grey backround with the apple logo on it so, I waited, Then it went to BSOD and got stuck in that loop, I then done a manual reset I was able to turn it off thats all. I tried restore in recovery mode with the latest itunes it come up with Unknown Error, error code (14) (something to do with unreconizable USB) tried many diffrent USB ports but sadly nothing, I then tried DFU mode with itunes still not working. Im really stuck on this one I need some assitance PLEASE! HELP!
No aftermarket apps on iphone 5s
Latest iOS 7 on iphone 5s
Latest itunes 11.1.5.5
Running Windows 7 (good comp)

Two problems with the newly implemented WF in UWL

Hi all:
       Finally I could see WF of leave request in UWL , but there seems to be two problems with it.
       The first is workitems disappear very slowly, for example , when approve it, the workitem would disappear at once at backend, however, workitems would disppear in five minutes.
       the second is for example employee A submits 5 five applications (just for example ), as click one workitem, five applications would appear the application list .
      could you please kindly give some suggestoins ?

Hi,
reduce "Default Cache Validity" value to 1 from Universal Worklist Service Configuration link under System Administration -> System Configuration -> Universal Worklist.
you can configure deltapullmechanism also.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
Regards,
Koti Reddy

Two problems with SB X-Fi

Hello I have two problems with my music card (Sound Blaster X-Fi usb). I have home theater (Laffayete AV2000) and columns with SB squeak and central column don"t work. I have update all drivers i dont now what i can do
Mys pc is Asus G73JH A, Windows 7 64bit

Sorry I don't really quite understand what you are trying to say. But you can try the following method to determine if there is something wrong with the X-Fi Surround 5..
1. Disconnect your speakers system, then connect a pair of earphones to the front, rear, c/sub ports.You can use a Y-Splitter for the Left & Right RCA connectors so that you can connect the earphones.
2. Play a music file and listen for any squeaking noise.
3. Repeat this for the rear and c/sub ports.
If you think there is anything wrong with the usb sound card, please feel free to write to our customer support.

Hi! I have an x-mini headset which im having trouble pairing to my iPhone 5s with bluetooth, any tips please?

Hi! I have an x-mini headset which im having trouble pairing to my iPhone 5s with bluetooth, any tips please?

Cellular calling doesn't yet work reliably.
Make sure you've followed the instructions in this support article. Note that both iCloud and FaceTime on the Mac must be signed in to the same Apple ID; those are two separate steps. Also note that the Mac and the phone must be connected to the same Wi-Fi network. Ethernet won't work. Trying to pair the phone to the Mac as a Bluetooth device won't work either.
If cellular calling still doesn't work, sign out of FaceTime and sign back in. You may have to do the same on the phone. The email address that you use as your Apple ID must be able to receive FaceTime calls.

Can't download anything from app store or itunes. everytime i try to install an app i get "there is abilling problem with a previous purchase. please update ur payment method". i have recently changed my address and visa debit card. please help

can't download anything from app store or itunes. everytime i try to install an app i get this error "there is a billing problem with a previous purchase. please update ur payment method". i have recently changed my visa debit card and home adress and when i make these changes i still get the same error.
will u please help me out?

Are you listing the billing address for the card correctly? The address in the iTunes/MAS account must match the address on your bill exactly.

My iphone says "theres a billing problem with a previous purchase please go to purchase history to correct the problem" but when i go to it nothing happens and is not telling me nothing Now i cant download no apps

My iphone says "theres a billing problem with a previous purchase please go to purchase history to correct the problem" but when i go to it nothing happens and is not telling me nothing Now i cant download no apps

You can contact the iTunes Store Customer Service department at no charge using the form on their Support page (select the category and subcategory closest to the issue you're reporting and you'll find an "Email Us" button) and explain your problem to them.
Copied from Varjak Paw in :https://discussions.apple.com/thread/2598671

There is a problem with adobe acrobat reader please exit adobe acrobat reader and try again 101:101

I'm trying to access some web PDF files via SharePoint Application but i got this error message "there is a problem with adobe acrobat reader please exit adobe acrobat reader and try again 101:101"
my operating system is Win 7 and I'm using Adobe Acrobat Pro 11.0

I'm having the same problem. Only I have Windows XP and at the end of the error message it shows 103.103. Please let me know if and when you get an answer or remedy to this problem. Thanks!

Two Problems with iPod Nano!

Hi Community!
As I have already written in the topic, I've got two problems with my new iPod Nano:
1) I charged the iPod over USB 2 and my dockingstation already about five hours, but the red sign and the message that I don't have to disconnect my iPod is still there (battery status shows full)
2) With the docked iPod my computer doesn't boot anymore. When I disconnect the iPod it works :-/
THX for helping me!
dynAdZ

Thank you for helping me with my problems, but I still don't know why my iPod gives me this message, altough it is fully charged. And the flashing warning symbol drives me nuts
Mhh I didn't find an image for that symbol... It's a red circle which is crossed. The manual says that there should now be a green symbol, or just the menu...??

Two problems with kernel26-2.6.39.1-1

hi,
I just upgraded system, and i found two problems with kernel26-2.6.39.1-1
first one is that i cannot use "reboot", the screen was black.
second, i cannot use " openconnect" to connect the vpn. and the error is
CSTP connected. DPD 30, Keepalive 20
Error: either "to" is duplicate, or "ipid" is a garbage.
Connected tun0 as XXX.XXX.XXX.XXX, using SSL
Continuing in background; pid 1661
DTLS handshake failed: 2
after i downgraded the kernel to kernel26-2.6.38.8-1, both problems were solved. so, i think, there should be something wrong with kernel26-2.6.39.1-1

thanks for replies.
" poweroff" was ok. but "reboot" didnt work (kernel26-2.6.39.1-1).
after i run "reboot",
the xorg was first killed,
then some words showed on the screen line by line,
finally, as far as i remenber, it stopped at "waiting for XXXXXX" or "XXXXXsignalXXXX".
im sorry i forget the exact words. but i think they are the last words we can see if we run "reboot"

Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Two problems with iTunes (permissions issue?)

Hello,
I have two problems with iTunes. I am not sure if they are related that's why I post them both.
1) iTunes doesn't delete apps after updating them anymore. This is happening since the (two?) last versions of iTunes and is the same with 10.5. The reason seems to be the permissions of the apps. Nearly all have "everyone = custom". Therefore I have to enter my admin password when I try to delete them manually. And iTunes itself cannot delete them on its own, of course. Why is this happening? Why is iTunes assigning such permissions to downloaded apps?
2) I can't login to my account from within iTunes anymore. That is also happening since quite a while. I am logged in (my ID is shown in the top right of the store) but cannot access my account details. iTunes asks for my password but after entering it the login mask appears again. It's not the password itself, it is correct.
Any suggestions?

Correct answer to find here:
https://discussions.apple.com/thread/1215039?start=0&tstart=0

Two problems with custom kernel

I get two problems with my custom kernel that is not using initrd and otherwise working fine:
1) initscripts does not print anything, i.e., I see the kernel messages and after a short while the login prompt. It seems to start the daemons, however, since my network is working. During shutdown the printout is working as usual.
2) the machine does not power off properly (just hangs/stops after saying that is now powers off).
I am missing some kernel options? Or do I have to configure something differently for not having an initrd?
Thanks, CC

ccom wrote:I now re-compiled with Arch Linux's default settings (except for SCSI, SATA, and filesystem drivers built in) and noinitrd in GRUB. I get the same two problems. What is initrd doing that I missed?
how about display drivers? are you compiling them in the kernel or as external modules?

TS2446 Error:there is a billing problem with your previous purchase please check your billing information.i have checked all my information and all the things are wright

Error::There is a billing problem with your previous purchase please check your billing information

Ask for assistance:
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action

Two Problems with Moto Droid--tips please!!

Similar Messages

Maybe you are looking for