Two problems with Preview

I received some .pdf images of book pages that needed to be rotated to be readable. After I saved the properly-rotated pages and closed the document I couldn't re-open it unless I quit Preview and opened it again. All I would get was blank pages.
My other problem is that someone scanned in a two-sided page and e-mailed it to me as a .bmp image. Mail said it's a 3.4 MB document so there must be
a lot there, but Preview only shows the front side. He said he did both sides, but only 1 side displays when I display the page thumbnails to the side.
Did he or I do something wrong?

The problem has nor recurred

Similar Messages

  • I am experiencing two problems with iTunes on my iPhone 5s.

    I am experiencing two problems with iTunes on my iPhone 5s.
    Issue 1: iTunes Match
    Some song playback is merging songs. I select “Song A” to be played and midway through the song it begins playing “Song B” however when I look at my phone it indicates that “Song A” is still playing even though the actual music is not “Song A”. I searched the Apple Support Community as well as the internet and this seems to be an ongoing issue back to 2012 that has not been resolved. All of the “fixes” that are provided do not work. For example, update/sync iTunes Match, delete the song from your iPhone and re-download from the cloud or delete the song from your iTunes including the iCloud and re-download. None of which worked. I even tried to complete erase the song from my computer hard drive and restarted my computer and then re-downloaded the song and it was still not working.
    Issue 2: iTunes Preview Track
    I am unable to preview any music on iTunes through the iTunes app on my phone. I have signed out of my user ID and restarted my phone and then logged back in and it did not fix the problem. My iTunes Match and iTunes radio are allowing me to play music. My software is up-to-date.

    Same problem here, Im running the latest version of iOS 7 on my iphone 5S (ipod 5S) bricked lol. It was working fine and then a mates baby grabbed my phone and dropped it (not very high) then it went off so i turned it on and BAM i got the grey backround with the apple logo on it so, I waited, Then it went to BSOD and got stuck in that loop, I then done a manual reset I was able to turn it off thats all. I tried restore in recovery mode with the latest itunes it come up with Unknown Error, error code (14) (something to do with unreconizable USB) tried many diffrent USB ports but sadly nothing, I then tried DFU mode with itunes still not working. Im really stuck on this one I need some assitance PLEASE! HELP!
    No aftermarket apps on iphone 5s
    Latest iOS 7 on iphone 5s
    Latest itunes 11.1.5.5
    Running Windows 7 (good comp)

  • Problem with Preview and PSD files - random gray square

    Hi guys, hope you can help...
    I've got a problem with Preview and PSD files.
    If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
    If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
    I've tried the same psd on my older iMac with leopard...and got no problem at all.
    I suspect it got something to do with my Ati...
    (this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
    Thanks for your help.
    DAve.

    maybe I'm onto something...
    I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
    It seems like the i7 is much faster than the Ati....
    Any more realistic ideas?

  • Problem with preview PDF files on Windows 7 32bit

    Hello,
    in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
    So, can someone help me?
    Config PC:
    Windows 7 32/64bit Pro
    Intel i3, 4GB
    Adobe Reader 11.0.5
    Adobe Flash Player 15 ActiveX
    Adobe Flash Player 15 plugin
    Preview Handler Surrogate Host ver.: 6.1.7601.17514
    Thank you for help.

    I think I figured it out after reading other forums. Thanks!

  • Problem with Preview fonts

    I am having a problem with previewing PDFs. No matter the source of the PDFs, the fonts are not displaying correctly.  They all have jagged edges and some are unreadable.  I've followed a few advices found on postings no no avail. I changed my Macbook Pro to a brandnew one and migrated data using a time-machine restore and the problem (of course) followed me.  If anybody can help I will appreciate. For the time being I am using Adobe reader.

    Yes I'm on a PC and I just tried your advice but I still get the same message.
    The support adviced me to delete the host-file in system32/drivers/etc but that didn't change anything either.

  • Two problems with the newly implemented WF in UWL

    Hi all:
           Finally I could see WF of leave request  in UWL , but there seems to be two problems with it.
           The first is workitems disappear very slowly, for example , when approve it, the workitem would disappear at once at backend, however, workitems would disppear in five minutes.
           the second is for example employee A submits 5 five applications (just for example ), as click one workitem, five applications would appear the  application list .
          could you please kindly give some suggestoins ?

    Hi,
    reduce "Default Cache Validity" value to 1 from Universal Worklist Service Configuration link under System Administration -> System Configuration -> Universal Worklist.
    you can configure deltapullmechanism also.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    Regards,
    Koti Reddy

  • Two Problems with iPod Nano!

    Hi Community!
    As I have already written in the topic, I've got two problems with my new iPod Nano:
    1) I charged the iPod over USB 2 and my dockingstation already about five hours, but the red sign and the message that I don't have to disconnect my iPod is still there (battery status shows full)
    2) With the docked iPod my computer doesn't boot anymore. When I disconnect the iPod it works :-/
    THX for helping me!
    dynAdZ

    Thank you for helping me with my problems, but I still don't know why my iPod gives me this message, altough it is fully charged. And the flashing warning symbol drives me nuts
    Mhh I didn't find an image for that symbol... It's a red circle which is crossed. The manual says that there should now be a green symbol, or just the menu...??

  • Two problems with kernel26-2.6.39.1-1

    hi,
    I just upgraded system, and i found two problems with kernel26-2.6.39.1-1
    first one is that i cannot use "reboot", the screen was black.
    second, i cannot use " openconnect" to connect the vpn. and the error is
    CSTP connected. DPD 30, Keepalive 20
    Error: either "to" is duplicate, or "ipid" is a garbage.
    Connected tun0 as XXX.XXX.XXX.XXX, using SSL
    Continuing in background; pid 1661
    DTLS handshake failed: 2
    after i downgraded the kernel to kernel26-2.6.38.8-1, both problems were solved. so, i think, there should be something wrong with  kernel26-2.6.39.1-1

    thanks for replies.
    " poweroff" was ok. but "reboot" didnt work (kernel26-2.6.39.1-1).
    after i run "reboot",
    the xorg was first killed,
    then some   words showed on the screen line by line,
    finally, as far as i remenber, it stopped at "waiting for XXXXXX" or "XXXXXsignalXXXX".
    im sorry i forget the exact words. but i think they are the last words we can see if we run "reboot"

  • Two problems with audio clips

    Hello,
    I'm having two problems with audio clips:
    1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
    2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
    What am I doing wrong?
    Thanks.

    1. Drag the little hand on speaker icon to drag from
    the Viewer...
    Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
    2. It means your sequence settings don't match the
    properties of the source audio you're putting in it,
    and you either need to change the settings in the
    sequence, or render the audio.
    Ah, that would explain it. Thanks!

  • Two problems with SB X-Fi

    Hello I have two problems with my music card (Sound Blaster X-Fi usb). I have home theater (Laffayete AV2000) and columns with SB squeak and central column don"t work. I have update all drivers i dont now what i can do
    Mys pc is Asus G73JH A, Windows 7 64bit

    Sorry I don't really quite understand what you are trying to say. But you can try the following method to determine if there is something wrong with the X-Fi Surround 5..
    1. Disconnect your speakers system, then connect a pair of earphones to the front, rear, c/sub ports.You can use a Y-Splitter for the Left & Right RCA connectors so that you can connect the earphones.
    2. Play a music file and listen for any squeaking noise.
    3. Repeat this for the rear and c/sub ports.
    If you think there is anything wrong with the usb sound card, please feel free to write to our customer support.

  • Two problems with iTunes (permissions issue?)

    Hello,
    I have two problems with iTunes. I am not sure if they are related that's why I post them both.
    1) iTunes doesn't delete apps after updating them anymore. This is happening since the (two?) last versions of iTunes and is the same with 10.5. The reason seems to be the permissions of the apps. Nearly all have "everyone = custom". Therefore I have to enter my admin password when I try to delete them manually. And iTunes itself cannot delete them on its own, of course. Why is this happening? Why is iTunes assigning such permissions to downloaded apps?
    2) I can't login to my account from within iTunes anymore. That is also happening since quite a while. I am logged in (my ID is shown in the top right of the store) but cannot access my account details. iTunes asks for my password but after entering it the login mask appears again. It's not the password itself, it is correct.
    Any suggestions?

    Correct answer to find here:
    https://discussions.apple.com/thread/1215039?start=0&tstart=0

  • Two problems with custom kernel

    I get two problems with my custom kernel that is not using initrd and otherwise working fine:
    1) initscripts does not print anything, i.e., I see the kernel messages and after a short while the login prompt. It seems to start the daemons, however, since my network is working. During shutdown the printout is working as usual.
    2) the machine does not power off properly (just hangs/stops after saying that is now powers off).
    I am missing some kernel options? Or do I have to configure something differently for not having an initrd?
    Thanks,  CC

    ccom wrote:I now re-compiled with Arch Linux's default settings (except for SCSI, SATA, and filesystem drivers built in) and noinitrd in GRUB. I get the same two problems. What is initrd doing that I missed?
    how about display drivers? are you compiling them in the kernel or as external modules?

  • I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup  2. Randomly disconnects from network. Any help will be greatly appreciated.

    I have two problems with my 2012 13” MacBook Pro.
    Gray screen shows at startup
    Randomly disconnects from network.
    Any help will be greatly appreciated.

    First, open Terminal in your Utilities folder and paste this into the prompt line:
    sudo update_dyld_shared_cache
    Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
    Next, boot the computer into Safe Mode.
    Next, do the following:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Problems with preview of illustor CS6

    i have problems with preview of illustor CS6. When i place a illustor in indesign the preview is not correct. same when i save illustrator to pdf

    Hi Heiko
    Did you create a package for enterprise deployment?
    Creative Suite Enterprise Deployment | Adobe Developer Connection
    The Adobe Enterprise packaging tool varies depending on which version of CS or CC you are packaging.
    Also you need to have a license/serial number that supports the use of enterprise deployment tools.  These tools allow you to create an install package that is already serialised and doesn't prompt for AdobeID where you license agreement supports such deployments.
    Also what image deployment system are you using to which client OS.
    The process is pretty simple now with the improved tools from Adobe, still some improvements they can make but it's a lot better than in the past.
    Good luck.

Maybe you are looking for