Two Problems with Purchased Songs

I've run into two problems recently. The first is that today my iPod stopped playing purchased music, the second is that my computer died so the only place I have my purchased music is on my computer.
Will iPod's stop playing purchased music after a certain period of time, if they are not reconnected to the appropriate authorized computer?
Also, in the case of a computer crashing, is there another way to recovered purchased music?

I was able to get my music back from help from someone on the forum. THANK YOU
I just need help with syncing phone to itunes.

Similar Messages

  • Itunes states that my computer is not authorized to download an audio book I purchased from itunes.  No problem with purchased songs however.

    Itunes states that my computer is not authorized to download an audio book I purchased from itunes.  No problem with purchased songs however.

    Hello susanserio
    Try Deauthorize your account and then Authorize the account to see if any changes occur. Also there may a resolution in the second article that can be helpful as well.
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/HT1420
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Problems with purchased songs and iTunes 7.0.1

    For some odd reason, I can't transfer purchased songs onto my ipod. They appear to be transferred, but I can't play them nor can I open them within iTunes. Is this an authorization issue? Has anyone had a similar problem?
    TIA
    -Chris

    They appear to be transferred, but I can't play them nor can I open them within iTunes.
    could you walk us through what happens when you try to play the songs in itunes, Chris?

  • Problem with purchased song

    I just purchased a single the other day, and when i purchased it the song listed at a length of 3:17. when i listened to it the song gets cut off at that point and doesn't finish. i thought this was strange, so i checked the single again on iTunes today and now the song available for purchase is 4:12 long. any way to get the full song since i already paid for it, or am i just out of luck?

    Contact the iTunes Music Store customer support department through the form at the bottom of this web page and explain the problem to them. They'll probably either re-authorize the download or issue a credit to your account so you can buy it again.

  • HT1325 Problems with purchased songs and new computers

    I have a new computer; my first mac. I am an apple convert, previously owning a toshiba. Some of the songs from an album I purchased through itunes will not play. What do I do? They have an ! with a circle around it next to them. I do not have a hardcopy or backup to revert back to. I just want to know how to be able to play these songs and listen to them as I have purchased the right to do so.

    Depending upon what country that you are in (music can't be redownloaded in all countries) then you might be able to redownoad it via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage.
    If it shows there but doesn't have the cloud symbol against it then try deleting it from the Music part of your library (where you are getting the exclamation mark) and it should then get the cloud symbol in Purchased for redownloading.
    If music shows there but not that album then is it still in your country's store ? If it is then check to see if it's hidden : http://support.apple.com/kb/HT4919
    If you aren't in a country where music can be redownloaded or if it'sno longer in your country's store then you won't be able to redownload it.
    But you should be keeping and maintaining a backup copy of all of your downloads, an item can be removed from the store at any time - you are only guaranteed one download of each item.

  • HT203167 Problems with purchased songs.

    I purchased music from iTunes recently. Although some of my songs appear to have fully downloaded, many are only able to play parts of the song before they cut off and switch to the next song in the list. The software on my computer, iTunes, and iPod are all up to date and installed correctly. Please help.

    Does the track play correctly in Quicktime Player?  If it does then it is an iTunes issue.  If it doesn't then it is possible the file was not completely downloaded, or is corrupt.  If you believe it is corrupt:
    If you are in a country where re-downloading is possible (iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085), delete the track (and the original file) and download again (Downloading [using iOS or computer] past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519).  See tips on downloading in https://discussions.apple.com/message/19097773, especially unchecking the "Allow Simultaneous Downloads" box in the downloads tab of iTunes.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • I am experiencing two problems with iTunes on my iPhone 5s.

    I am experiencing two problems with iTunes on my iPhone 5s.
    Issue 1: iTunes Match
    Some song playback is merging songs. I select “Song A” to be played and midway through the song it begins playing “Song B” however when I look at my phone it indicates that “Song A” is still playing even though the actual music is not “Song A”. I searched the Apple Support Community as well as the internet and this seems to be an ongoing issue back to 2012 that has not been resolved. All of the “fixes” that are provided do not work. For example, update/sync iTunes Match, delete the song from your iPhone and re-download from the cloud or delete the song from your iTunes including the iCloud and re-download. None of which worked. I even tried to complete erase the song from my computer hard drive and restarted my computer and then re-downloaded the song and it was still not working.
    Issue 2: iTunes Preview Track
    I am unable to preview any music on iTunes through the iTunes app on my phone. I have signed out of my user ID and restarted my phone and then logged back in and it did not fix the problem. My iTunes Match and iTunes radio are allowing me to play music. My software is up-to-date.

    Same problem here, Im running the latest version of iOS 7 on my iphone 5S (ipod 5S) bricked lol. It was working fine and then a mates baby grabbed my phone and dropped it (not very high) then it went off so i turned it on and BAM i got the grey backround with the apple logo on it so, I waited, Then it went to BSOD and got stuck in that loop, I then done a manual reset I was able to turn it off thats all. I tried restore in recovery mode with the latest itunes it come up with Unknown Error, error code (14) (something to do with unreconizable USB) tried many diffrent USB ports but sadly nothing, I then tried DFU mode with itunes still not working. Im really stuck on this one I need some assitance PLEASE! HELP!
    No aftermarket apps on iphone 5s
    Latest iOS 7 on iphone 5s
    Latest itunes 11.1.5.5
    Running Windows 7 (good comp)

  • I've two problems with my 3000C100 laptop.

    I’m having two problems with my Lenovo 3000C100 laptop.
    1- The battery is dropping to 6% from 95% and
    2- The screen is having over contrast. (Therefore the quality of photos is not good)
    I’ve set the brightness to the lowest value. The backlight of the screen flicker sometimes.
    is it possible to resolve?
    clickout.110mb.com

    26-Sep-2008 10:40 AM
    solo2_2 wrote:
    1st sometimes I can even play videos the phone simply reboots.
    2nd When i listening to slow songs theres a pop sound coming out its speaker but when i listen it in headset there is no pop sound.
    U got any solution for it.
    With the latest firmware v8.30
    1. The rebooting problem was fixed, but there is still some problems with it though.
    2. It was already cleaned up, but many questions arise regarding the sound quality coming both from headset and the loudspeaker.

  • Two problems with the newly implemented WF in UWL

    Hi all:
           Finally I could see WF of leave request  in UWL , but there seems to be two problems with it.
           The first is workitems disappear very slowly, for example , when approve it, the workitem would disappear at once at backend, however, workitems would disppear in five minutes.
           the second is for example employee A submits 5 five applications (just for example ), as click one workitem, five applications would appear the  application list .
          could you please kindly give some suggestoins ?

    Hi,
    reduce "Default Cache Validity" value to 1 from Universal Worklist Service Configuration link under System Administration -> System Configuration -> Universal Worklist.
    you can configure deltapullmechanism also.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    Regards,
    Koti Reddy

  • Two Problems with iPod Nano!

    Hi Community!
    As I have already written in the topic, I've got two problems with my new iPod Nano:
    1) I charged the iPod over USB 2 and my dockingstation already about five hours, but the red sign and the message that I don't have to disconnect my iPod is still there (battery status shows full)
    2) With the docked iPod my computer doesn't boot anymore. When I disconnect the iPod it works :-/
    THX for helping me!
    dynAdZ

    Thank you for helping me with my problems, but I still don't know why my iPod gives me this message, altough it is fully charged. And the flashing warning symbol drives me nuts
    Mhh I didn't find an image for that symbol... It's a red circle which is crossed. The manual says that there should now be a green symbol, or just the menu...??

  • Two problems with kernel26-2.6.39.1-1

    hi,
    I just upgraded system, and i found two problems with kernel26-2.6.39.1-1
    first one is that i cannot use "reboot", the screen was black.
    second, i cannot use " openconnect" to connect the vpn. and the error is
    CSTP connected. DPD 30, Keepalive 20
    Error: either "to" is duplicate, or "ipid" is a garbage.
    Connected tun0 as XXX.XXX.XXX.XXX, using SSL
    Continuing in background; pid 1661
    DTLS handshake failed: 2
    after i downgraded the kernel to kernel26-2.6.38.8-1, both problems were solved. so, i think, there should be something wrong with  kernel26-2.6.39.1-1

    thanks for replies.
    " poweroff" was ok. but "reboot" didnt work (kernel26-2.6.39.1-1).
    after i run "reboot",
    the xorg was first killed,
    then some   words showed on the screen line by line,
    finally, as far as i remenber, it stopped at "waiting for XXXXXX" or "XXXXXsignalXXXX".
    im sorry i forget the exact words. but i think they are the last words we can see if we run "reboot"

  • Two problems with audio clips

    Hello,
    I'm having two problems with audio clips:
    1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
    2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
    What am I doing wrong?
    Thanks.

    1. Drag the little hand on speaker icon to drag from
    the Viewer...
    Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
    2. It means your sequence settings don't match the
    properties of the source audio you're putting in it,
    and you either need to change the settings in the
    sequence, or render the audio.
    Ah, that would explain it. Thanks!

  • Two problems with SB X-Fi

    Hello I have two problems with my music card (Sound Blaster X-Fi usb). I have home theater (Laffayete AV2000) and columns with SB squeak and central column don"t work. I have update all drivers i dont now what i can do
    Mys pc is Asus G73JH A, Windows 7 64bit

    Sorry I don't really quite understand what you are trying to say. But you can try the following method to determine if there is something wrong with the X-Fi Surround 5..
    1. Disconnect your speakers system, then connect a pair of earphones to the front, rear, c/sub ports.You can use a Y-Splitter for the Left & Right RCA connectors so that you can connect the earphones.
    2. Play a music file and listen for any squeaking noise.
    3. Repeat this for the rear and c/sub ports.
    If you think there is anything wrong with the usb sound card, please feel free to write to our customer support.

  • Two problems with iTunes (permissions issue?)

    Hello,
    I have two problems with iTunes. I am not sure if they are related that's why I post them both.
    1) iTunes doesn't delete apps after updating them anymore. This is happening since the (two?) last versions of iTunes and is the same with 10.5. The reason seems to be the permissions of the apps. Nearly all have "everyone = custom". Therefore I have to enter my admin password when I try to delete them manually. And iTunes itself cannot delete them on its own, of course. Why is this happening? Why is iTunes assigning such permissions to downloaded apps?
    2) I can't login to my account from within iTunes anymore. That is also happening since quite a while. I am logged in (my ID is shown in the top right of the store) but cannot access my account details. iTunes asks for my password but after entering it the login mask appears again. It's not the password itself, it is correct.
    Any suggestions?

    Correct answer to find here:
    https://discussions.apple.com/thread/1215039?start=0&tstart=0

  • Two problems with custom kernel

    I get two problems with my custom kernel that is not using initrd and otherwise working fine:
    1) initscripts does not print anything, i.e., I see the kernel messages and after a short while the login prompt. It seems to start the daemons, however, since my network is working. During shutdown the printout is working as usual.
    2) the machine does not power off properly (just hangs/stops after saying that is now powers off).
    I am missing some kernel options? Or do I have to configure something differently for not having an initrd?
    Thanks,  CC

    ccom wrote:I now re-compiled with Arch Linux's default settings (except for SCSI, SATA, and filesystem drivers built in) and noinitrd in GRUB. I get the same two problems. What is initrd doing that I missed?
    how about display drivers? are you compiling them in the kernel or as external modules?

Maybe you are looking for

  • .swf file is fine but keyboard doesn´t work in IE

    I finish a videogame and within Flash 8 Professional everything is working fine, when I test the animation the characters respond to the keyboard interactivity but when I try to test the .swf in Internet Explorer there is no connection between the ke

  • FCS is only deleting my FCP project file and not linked assets. please help.

    When deleting a FCP project from FCS it does not give me the option to delete all linked media. It only deletes the FCP project file leaving me to delete all related media manually. In the user guide it says it should give me the option to delete the

  • IWorks Pages Graphics

    I have just purchased my Macbook Pro...I am used to using Word as my word processing software, but now have iWorks Pages. When creating documents in Word I can insert graphics from files that are included with the software. I cannot find any graphics

  • Gmail, forwarding, address list, and Mail

    Couple of questions: - I forward my school email to my gmail account. My Mail now grabs anything that is left in my gmail inbox. In gmail I can reply/send from either my school or gmail account. How do I do this in Mail without setting up two mailbox

  • ORA-06550 error while executing Dynamic Sql

    EXECUTE IMMEDIATE 'BEGIN :out := ' || lv_formula || '; END;' using out RESULT ; here lv_formula:= ((capcost * rate / 100) + (ob + (ob * interestrate / 100))) lv_formula is varchar2(360); and capcost,rate,ob & interestrate are my column names . Here I