Two problems with setting up arch. Keyboard layout and wifi card.

Hi guys.
I have installed arch on my old laptop (LG le express) and I have two problems.
1. I wasn't able to create a Hebrew keyboard layout.
2. I don't know how to install my wifi card. (Ralink 2500).
as for one, I changed my xorg.conf to this:
section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "Xkbmodel" "pc105"
Option "XkbLayout" "us,il"
Option "KkbOption" "grep:switch,grp:alt_shift_toggel,grp_led:caps"
EndSection
but it didn't work.
As for 2, I have found this:
https://wiki.archlinux.org/index.php/Us … eta_driver
But I can't find how to install rt2x00
Thanks

If you edit the first post you can change the title, prepend it with [solved] (once all issues are actually solved). Also if you can post your working solution then it will be useful for others having similar difficulties. Please read the following links.
Mark threads as [solved]
Forum etiquette
As for your wireless issue, which tool are you using? A quick google around seems to suggest that netcfg in combination with wpa supplicant can connect to LEAP encrypted networks, eg this thread. Are you also aware that there are graphical tools to do this for you that you may find easier, such as wicd?
Last edited by quigybo (2010-11-12 01:56:01)

Similar Messages

Problem with set up airport time capsule and ATT net gear 7550 router

how to set-up airport time capule to work with AT&T Netgear 7550 router. i keep getting an error

Since this is a full router.. simply set the TC to bridge mode..
Plug WAN TC into the LAN of the Netgear.
Highly recommend using ethernet to do setup as well.
Go to airport utility.. and select the TC. If it doesn't appear in the airport utility tell us.
When you click it a summary page will come up.. click edit on the summary.
Go to the network tab and select bridge mode..
Then go to the wireless tab.. you can choose here from a few options.. I recommend create a wireless network. And use a different name to the existing wireless of the Netgear.. use wireless names that are short, no spaces and pure alphanumeric.. they just work better. Use it for whatever device is going to use the TC to backup.. for internet it doesn't matter if you connect to the netgear or the TC .. whichever is better connection.

Problem with set-up: Blackberry ID- country and language

Hello, I am setting up my Playbook tablet for the first time and have hit a snag on the third or fourth screen. I am supposed to enter my country and language for Blackberry ID, but I see only 'No country indicated' and I find no way to enter a country and language, as prompted. According to the tutorial, this screen should show a language option immediately. I went to get a Blackberry ID, through my e-mail address but it is obviously not 'connected' in any way (yet) to my Playbook tablet.
I hope someone might help me with this and I will certainly appreciate said help! Must say the obvious, I am new to this forum, but I am sure I am posting my question in the right forum.
Thanks a lot!
Solved!
Go to Solution.

No worries, It could have been that you lost connection. Doing this will make sure that you are connected. Sometimes you may need to delete the connection and try setting up again and then going further will display what you are looking for.
Regards,
Nick
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Problem with OS 10.2.0.424 and Media Card Encryption

Several weeks ago I upgraded to OS 10.2.0.424. Everything went fine, no problems. My phone worked perfectly.
Then over one week later I turned my phone on in the morning and after it had booted it said "your media card was encrypted on a different device. You will need to reformat your media card on this device before you can use it".
Now, the following should be noted very carefully: THE MEDIA CARD WAS BOUGHT SPECIFICALLY FOR MY Z10, IT WAS FORMATTED IN THE SAME HANDSET, ENCRYPTED IN THE SAME HANDSET AND HAS ***NEVER*** BEEN OUT OF THE HANDSET.
As far as I am concerned, this is a fault with the upgrade. Having looked on Crackberry.com I see many other users having a similar problem. I am fortunate in that I do weekly backups of my handset including the media card. However I am reluctant to use my media card again in case this problem recurs.
I tried contacting Blackberry help on Twitter however I can only assume that the Blackberry Twitter team are sub-contractors who don't work for BT as their advice was along the lines of "have you tried rebooting? You have? Oh well, you'll need to speak to your mobile provider as there's nothing we can do."
Please, Blackberry, can you acknowledge this fault and advise what your timescale is for resolution?
A dissatisfied loyal Blackberry customer.

If the user removes the media card from the BlackBerry device and places it in a new BlackBerry device, the new BlackBerry device cannot decrypt any files that the first BlackBerry device encrypted on the media card using a randomly generated device key. If the first BlackBerry device encrypted the files on the media card using the BlackBerry device password, when the user removes the media card from the BlackBerry device and places it in a new BlackBerry device, the new BlackBerry device prompts the user for the password used on the first BlackBerry device to access the files on the new device.
The above is from BlackBerry:
I can only assume that Upgrading is like changing Devices, so before Upgrading save all data.
Someone else with more knowledge about encryption and seeing this post may respond.

Button in Bex Analyser 7.0 - problem with setting up Static Parameters

Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name                          Index          Value
DATA_PROVIDER        0               DP_1
CMD                             0               PROCESS_VARIABLES
SUBCMD                      0               VAR_SUBMIT
VAR_NAME                 0               0RMA_FIP
VAR_VALUE               0               004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
AL

I managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered".

Two problems with custom kernel

I get two problems with my custom kernel that is not using initrd and otherwise working fine:
1) initscripts does not print anything, i.e., I see the kernel messages and after a short while the login prompt. It seems to start the daemons, however, since my network is working. During shutdown the printout is working as usual.
2) the machine does not power off properly (just hangs/stops after saying that is now powers off).
I am missing some kernel options? Or do I have to configure something differently for not having an initrd?
Thanks, CC

ccom wrote:I now re-compiled with Arch Linux's default settings (except for SCSI, SATA, and filesystem drivers built in) and noinitrd in GRUB. I get the same two problems. What is initrd doing that I missed?
how about display drivers? are you compiling them in the kernel or as external modules?

I've two problems with my 3000C100 laptop.

I’m having two problems with my Lenovo 3000C100 laptop.
1- The battery is dropping to 6% from 95% and
2- The screen is having over contrast. (Therefore the quality of photos is not good)
I’ve set the brightness to the lowest value. The backlight of the screen flicker sometimes.
is it possible to resolve?
clickout.110mb.com

26-Sep-2008 10:40 AM
solo2_2 wrote:
1st sometimes I can even play videos the phone simply reboots.
2nd When i listening to slow songs theres a pop sound coming out its speaker but when i listen it in headset there is no pop sound.
U got any solution for it.
With the latest firmware v8.30
1. The rebooting problem was fixed, but there is still some problems with it though.
2. It was already cleaned up, but many questions arise regarding the sound quality coming both from headset and the loudspeaker.

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

Problem with SET GET parameters

Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
Aravind

Hi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar

I am experiencing two problems with iTunes on my iPhone 5s.

I am experiencing two problems with iTunes on my iPhone 5s.
Issue 1: iTunes Match
Some song playback is merging songs. I select “Song A” to be played and midway through the song it begins playing “Song B” however when I look at my phone it indicates that “Song A” is still playing even though the actual music is not “Song A”. I searched the Apple Support Community as well as the internet and this seems to be an ongoing issue back to 2012 that has not been resolved. All of the “fixes” that are provided do not work. For example, update/sync iTunes Match, delete the song from your iPhone and re-download from the cloud or delete the song from your iTunes including the iCloud and re-download. None of which worked. I even tried to complete erase the song from my computer hard drive and restarted my computer and then re-downloaded the song and it was still not working.
Issue 2: iTunes Preview Track
I am unable to preview any music on iTunes through the iTunes app on my phone. I have signed out of my user ID and restarted my phone and then logged back in and it did not fix the problem. My iTunes Match and iTunes radio are allowing me to play music. My software is up-to-date.

Same problem here, Im running the latest version of iOS 7 on my iphone 5S (ipod 5S) bricked lol. It was working fine and then a mates baby grabbed my phone and dropped it (not very high) then it went off so i turned it on and BAM i got the grey backround with the apple logo on it so, I waited, Then it went to BSOD and got stuck in that loop, I then done a manual reset I was able to turn it off thats all. I tried restore in recovery mode with the latest itunes it come up with Unknown Error, error code (14) (something to do with unreconizable USB) tried many diffrent USB ports but sadly nothing, I then tried DFU mode with itunes still not working. Im really stuck on this one I need some assitance PLEASE! HELP!
No aftermarket apps on iphone 5s
Latest iOS 7 on iphone 5s
Latest itunes 11.1.5.5
Running Windows 7 (good comp)

Problem with setting Source Level in Sun Studio 2

I've got problem with setting Source Level to 1.5 in Sun Studio 2. When I try to set it to 1.5 in Project properties and click Ok everything seem to go well, but when I open Project Properties again Source Level is set to 1.4. I need this to work cause I started to lear Java recently and I want to use foreach loop.
Please help

I'm just citing an example using Date().
In fact, whether I use DateFormat or Calendar, it shows the same result.
When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
It works correctly under jdk1.3.1

Problems with setting up my ISP's mail server in Windows Live Mail and Thunderbird

The laptop is a G60-535DX with Windows 7 64 bit. I've managed to setup my gmail account fine in Live Mail, but when setting up my ISP' mail server, it doesn't work. I get the message that the information was entered correctly, and I see the 'connecting' at the bottom of the page, and then 'error', and clicking on it shows a socket error #10061. In Thunderbird, I get a timeout error message. I've entered all the incoming and outgoing server information correctly, (I've done this over 8-9 times now), the ports are the defaults(110,25), no SSL, no authentication. I've talked with my ISP several times. Just a couple of hours ago was the last time. Their only other possibilities were that Live Mail had problems with setting up more than one account, that Live Mail needed updating, that Windows 7 was a new operating system and there were 'kinks'. I removed the gmail account, set up the ISP's mail by itself; didn't help. I checked for Live Mail updates, but found out that they all come from Windows updates(which are current). The folks on PCQ&A inform me that they have 3 or 4 accounts with Live Mail. I can get my mail, by logging onto my ISP's website, but that' kind of a nuisance. I posted this in Seven Forums and they didn't have any ideas. As I said, I also can't get my mail server to work in Thunderbird, either. I don't know what else to try. (short of activating the recovery partition and starting from scratch). Any ideas would be more that welcome.
Thanks,
Steve

Stevehiker wrote:
Nevermind, it's fixed. One of the guys on PCQ&A suggested going to my ISP's website to see if they had a support page. They did and it stated that under certain circumstances that for the login ID the whole email address should be entered. For XP and Outlook Express one only uses the first part of the email address (your name); so just for grins I entered the whole address, name and all and everyting worked. Called my ISP and was told that that wasn't the way it's supposed to work. Well----
Thanks anyway,
Steve
Mine works the same way_must enter full email address as login. AT&T?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Obiee 11g . problem with set default as columnname in interaction tab

Hi Obiee gurus ,
I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
can Please give some suggestion for this problem.
regards
Srinivas

Hi Srinivas,
i guess this will be same for 11G
Refer
http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
thanks,
Saichand.v

Two problems with the newly implemented WF in UWL

Hi all:
       Finally I could see WF of leave request in UWL , but there seems to be two problems with it.
       The first is workitems disappear very slowly, for example , when approve it, the workitem would disappear at once at backend, however, workitems would disppear in five minutes.
       the second is for example employee A submits 5 five applications (just for example ), as click one workitem, five applications would appear the application list .
      could you please kindly give some suggestoins ?

Hi,
reduce "Default Cache Validity" value to 1 from Universal Worklist Service Configuration link under System Administration -> System Configuration -> Universal Worklist.
you can configure deltapullmechanism also.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
Regards,
Koti Reddy

Two Problems with iPod Nano!

Hi Community!
As I have already written in the topic, I've got two problems with my new iPod Nano:
1) I charged the iPod over USB 2 and my dockingstation already about five hours, but the red sign and the message that I don't have to disconnect my iPod is still there (battery status shows full)
2) With the docked iPod my computer doesn't boot anymore. When I disconnect the iPod it works :-/
THX for helping me!
dynAdZ

Thank you for helping me with my problems, but I still don't know why my iPod gives me this message, altough it is fully charged. And the flashing warning symbol drives me nuts
Mhh I didn't find an image for that symbol... It's a red circle which is crossed. The manual says that there should now be a green symbol, or just the menu...??

Two problems with setting up arch. Keyboard layout and wifi card.

Similar Messages

Maybe you are looking for