Two Program Windows?

Hey,
I just have a short question: How do I open two program windows in Premiere?
The new multiple timeline feature is really cool, but it would be cool to have two timelines open and one program window for each timeline instead of 1 program, 1 source.
Thanks in advance!
Philip

Fillern1 wrote:
Yeah, that doesn't really do it. because both are still connected to the same timeline, although not the same time in the timeline.
It's basically just to have a quick full size scrubbing area to quickly see and select shots to drag from one timeline to the other. So you can use the timeline to scrub instead of scrubbing in the monitor windows, plus the scrub head and monitor window will remain when you click over to to the other timeline.
You can do that in CC2014.1 by opening the second sequence via the media browser...
Save your current project then navigate to it via the media browser and open the sequence you want as a 'source-side' sequence.
This will open in the source monitor and open a timeline appended (Source Monitor)
you can 'pancake' the two timelines for simultaneous comparison between source and program.
There is a danger here though... I'm not sure you are supposed to do this / I don't think this has been thought all the way through - I was able to get a spinning beach ball by editing a sequence into itself (Avid always makes you make a dupe to avoid this).

Similar Messages

How to Print text in two main windows

For printing label have created two main windows on a page. calling function write_form In ABAP Program under do loop for two times.
but program prints only one window. why is it so? how can i print text on two windows.
do 2 times.
COUNT = COUNT + 1.
loop at itab WHERE DEPTT LT 200.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        ELEMENT = 'TEST'
        FUNCTION = 'SET'
        TYPE     = 'BODY'
      WINDOW   = 'MAIN'
      EXCEPTIONS
       ELEMENT   = 1
       FUNCTION = 2
       TYPE      = 3
       UNOPENED = 4
       UNSTARTED = 5
       WINDOW    = 6
       OTHERS    = 7.
endloop.
enddo.
Please guide.

Since the information is variable and coming out of the print program, I can assume you want to print many labels but two to a page. Also, any page numbering, etc will need to be updated. This is easily accomplished with SAPScript but a feature people rarely use I believe. Here are the simple steps:
1) On the Windows Screen: Creat a main window for the size of the label, etc knowing that you will be putting multiple windows on a page. For example, if page size is 8.5 x 11, maybe your window size is 6 X 4 or something similar. You only need one main window defined.
2) Now go to Page Windows Screen. Add a window MAIN and down at the bottom where it says Window Type put in MAIN. Next to this field is a little field about two characters long. In here put in '01'.
3) Now Add another window MAIN and down at the bottom put in '02'.
Hopefully this gives you the idea. I've done this with up to 30 small windows in order to print variable window for labels on label stock such as Avery 8167, etc.
Good Luck!
Tim Stadler
Menasha Corporation

As soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down

Linc,
You keep showing up when I search for this problem so I hope you can help.
I'm having the same issue in Premiere and Media Encoder (but not After Effects). My Mac just restarts itself as soon as video is loaded. I can start Premiere and open a project and go through relinking media, but as soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down.
I've fixed the problem temporarily two times. The first time I was troubleshooting what was wrong and wound up putting in my old video card and after that fixed the problem, I switched back to my GTX 680. I also did a driver update. After doing that I was ok for a few days so I figured it was a driver thing or maybe the card just needed to be reseated. Then when it started acting up again I figured something was going on.
So I started searching again and came across one of your posts that recommended removing CUDA. I did that and it worked perfectly for a week until about 20 minutes ago. Crashed in the middle of an edit and now each time I restart Premiere it crashes as soon as video touches my monitors.
I found this post because I specifically searched for "com.nvidia.web.NVDAResmanWeb(8.2.7)" from my Problem Report.
Any thoughts?
Thanks,
Darren
Fri Jan 16 14:43:42 2015
panic(cpu 5 caller 0xffffff7f999066a4): NVRM[0/4:0:0]: Read Error 0x00002100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff827e13b000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82776cbbe0 : 0xffffff8018c22f79
0xffffff82776cbc60 : 0xffffff7f999066a4
0xffffff82776cbd20 : 0xffffff7f999e0774
0xffffff82776cbd70 : 0xffffff7f99c1605d
0xffffff82776cbdc0 : 0xffffff7f99c4ea83
0xffffff82776cbe20 : 0xffffff7f99a05b8f
0xffffff82776cbe40 : 0xffffff7f9990ca2d
0xffffff82776cbef0 : 0xffffff80190b0a20
0xffffff82776cbf30 : 0xffffff80190af4c2
0xffffff82776cbf80 : 0xffffff80190af597
0xffffff82776cbfb0 : 0xffffff8018cd7607
 Kernel Extensions in backtrace:
 com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000->0xffffff7f99b5cfff
 dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
 dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9989b000
 dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f993a3000
 dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f998ab000
 com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f99b6c000->0xffffff7f99d36fff
 dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000
 dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
<Re-Titled By Host>

Thanks for the reply. Sorry for the shortened log. Here's the full thing. By the way, where do you learn to read these things? Are there keywords like "error" that you just learn to look for or is it something for in depth?
Thanks,
Darren
Mon Jan 19 08:02:40 2015
panic(cpu 5 caller 0xffffff7f9cd066a4): NVRM[0/4:0:0]: Read Error 0x00504610: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff82813fc000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82927dbaa0 : 0xffffff801c022f79
0xffffff82927dbb20 : 0xffffff7f9cd066a4
0xffffff82927dbbe0 : 0xffffff7f9cde0774
0xffffff82927dbc30 : 0xffffff7f9d03e562
0xffffff82927dbc50 : 0xffffff7f9d015a35
0xffffff82927dbd10 : 0xffffff7f9d015e05
0xffffff82927dbd70 : 0xffffff7f9d016096
0xffffff82927dbdc0 : 0xffffff7f9d04ea83
0xffffff82927dbe20 : 0xffffff7f9ce05b8f
0xffffff82927dbe40 : 0xffffff7f9cd0ca2d
0xffffff82927dbef0 : 0xffffff801c4b0a20
0xffffff82927dbf30 : 0xffffff801c4af4c2
0xffffff82927dbf80 : 0xffffff801c4af597
0xffffff82927dbfb0 : 0xffffff801c0d7607
 Kernel Extensions in backtrace:
 com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000->0xffffff7f9cf5cfff
 dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
 dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9cc9b000
 dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9c7a3000
 dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f9ccab000
 com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f9cf6c000->0xffffff7f9d136fff
 dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000
 dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x000000001be00000
Kernel text base: 0xffffff801c000000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 234985677156509
last loaded kext at 1019554175070: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9e577000, size 335872)
last unloaded kext at 421976737662: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f9e428000, size 8192)
loaded kexts:
com.nvidia.web.GeForceWeb 8.2.7
com.nvidia.web.NVDAGK100HalWeb 8.2.7
com.nvidia.web.NVDAResmanWeb 8.2.7
com.blackmagic-design.desktopvideo.iokit.driver 10.3.1
com.blackmagic-design.desktopvideo.iokit.framebufferdriver 10.3
com.ATTO.driver.ATTOExpressPCIUl4 4.4.1
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.afpfs 11.1
com.apple.nke.asp-tcp 8.0.1
com.apple.filesystems.msdosfs 1.9
com.apple.filesystems.ntfs 3.11
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBDisplays 360.8.14
com.apple.driver.Oxford_Semi 3.4.1
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.driver.AppleIntel8254XEthernet 3.1.4b1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.security.SecureRemotePassword 1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOATAFamily 2.5.2
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:

Uninstalled QucikTime, I have these two programs, apple support update, and

I used QuickTime player on my windows 7 64 bit PC , didn't like it, removed it using add/remove program. Now I have these two: Apple Application Support Version 1.3.1 and is 42.8 MB and Apple Software update 2.1.1.116, 2.15 MB. They are from Apple, Inc. They are listed on my ad /remove program. My question:Since I have Uninstalled Quick time player, do i need to remove these two files? Are they related to any other important software like (e.g adobe)?
I have apple support update, which has , as I understand,an update , but I no longer have a Quick Time program. Do I need to get rid of these two programs, and how to do it safely?
Thanks

They're not doing anything now, so you can remove them. Uninstall them from the Add/Remove Programs, just as you did with QuickTime.
Regards.

How to Zoom and Pan in the program window.

Hi,
I have been using scale to adjust larger than 4K image sequences so they fit 1080 and 4K output. I want to be able to zoom in and pan/tilt the program window so I can see the edges of the program window close up, so I can see to make a fine adjustment of scale. I want to be able to adjust scale precisely so I don't lose a single pixel, or include any black around the edges of the images. Of course I can't see the edges close up enough while looking at the entire image, to really see if I have scaled too much or too little. I know how to zoom in the program window, but how do I pan over to the side and bottom edges ? Without being able to pan I instantly lose the edges of the frame when I zoom in the program window.

Perhaps this will help it make sense to you.
I am taking tme lapse sequences shot on a DSLR and putting them onto Blu Ray disks for viewing. I also outputted a 4K file to try to play at Best Buy on a 4K television. The images are 4928 X 3280 pixels, which is larger than 4K, and much larger than 1080. One of the advantages of using these large images directly and not reducing them in Photoshop first is that I can have a time lapse zoom, which is very difficult to achieve otherwise. I can also pan and tilt. Another advantage is not having to reduce thousands of images three times, once for 1080, once for 4K, and once for stills..
I usually work with 1080 video, and animated 1080 still sequences from Maya, or standard definition video. This is the my first opportunity to work with higher resolutions.
Generally, for my first evaluation of these DSLR stills, i wanted to show some of them fully without cutting any off. This means there is a black border onthe sides because the DSLR stills are 2:3 instead of 9:16. For this I have used a scale of 32.6% for 1080, and 66% for 4K. For some sequences i wanted to just completely fill the frame. For this I used 38.9% for 1080, and 77.9% for 4K.
My assumption is that Premier should do scaling as well as Photoshop does, and so I have let Premier do the work, saving me a lot of extra work. First i take all the original images and process them from raw to tiff, for the day exposures. Then i process them again for the night exposures. Then i bring them into either my 1080 project, or my 4K project. I put the night pictures above the day pictures on a separate video track. I use opacity to dissolve from the day to night processed images as night falls inthe scene.
Two sequences I shot are of the night sky during the recent meteor shower. After watchign the video I see i caught three instances of persistent meteor trails distorting in the sky. I was able to zoom in quite a bit, and track the position, because the sequence is of greater resolution than the native 1080 format. It gives me a second change at composition, or the ability to zoom in on something interesting that happens in the scene.
It seems to me that the only reason i would want to first process the images down to 1080 in Photoshp, would be if the quality of the scaling was higher in Photoshop.
When i adjust the scale, I am adjusting the scale of an image that is 4928 X 3280, in the program monitor which is probably only well less than 1000 pixels on my screen. It would be nice if I could not only zoom, but pan in the program window, so I could more accurately adjust scale by looking at the edges. So if there is no other way to do this visually, I am suggesting adding the ability to pan and tilt in the program monitor to accomplish this. Sure I could figure out the scale mathematically. I could still end up adding a row of black pixels, or cutting off a row of image pixels, due to some error such as rounding errors, or starting with 1 instead of zero, or vice versa.

How to open two program in one click??

hi there Java lovers , can anyone help me on this ?
I want to open two program ( 2 windows ) after I click on a button... how can I do this ??
please help me & Thanks for the help ....

hi there Java lovers , can anyone help me on this ?
I want to open two program ( 2 windows ) after I click
on a button... how can I do this ??
please help me & Thanks for the help ....I suppose that you can open 2 windows,two Dialog windows.You cann't open 2 Frame windows at the same time.
To do this ,you can use Dialog.show() to make the windows be visible.

Clip im importing is too big in program window, and too big in exported media

Hi all, would appreciate any help from you guys im going round the bend- im on a friends machine and trying out PP5 for the first time.
I have a clip im trying to export with two other clips in the same sequence. The clip is a .mov file, 1920 x 1080.
When i right click on the two other clips (Mpegs, 320 x 240) and hit scale to frame, everything goes fine for them in the export and they fit the program window too perfectly. But for some reason when I do it with the above clip, there's lots missing around the edges. I'm even setting the project up to have 1920:1080 (16:9) before I start.
Also, when I import the offending clip into the source window it automatically sets it to 50% and it is viewable perfectly at 50% ( if I change the source window to 100% I can not see the whole frame in the source window). But at 50% in the program window, it is still cutting off huge amounts aroudn the edges.
Can someone please help and suggest some remedy for this? This is driving me demented. Cheers

Hi Jim, thanks for coming back to me- sorry im long getting back to you, ive been working.
I tried your suggestion ( selecting monitor to fit), but it's still cutting a massive amount off the edges of the first clip - which is 1920x1080. The second clip still fits ok though at 320x240.
Some more info - when I import the 1920x1080 into the source monitor, it automatically goes to 50%, and then displays perfectly. Then when I drag it to the timeline, alot of it is cut off around the edges as above. However, if I set tyhe program monitor to 50%, the same amounts are cut off.... Does that help?
Any other ideas?
Thanks again for the help

Switching between program windows.

I can't switch from one program window to another with cmd+<. For example when I have two safari windows it's not possible to switch between the two with these keys. I use this a lot. How can I fix it?

Hi..
Check in system preferences under keyboard / keyboard shortcuts /keyboard & text input.
On my mac its ctrl + F4 (^F4).
/Dennis

Two Dreamweaver Windows Open

Is the a way to get 2 Dreamweaver windows open at the same?
It's kind of annoying to keep having to use the tabs to switch
files. One Dreamweaver window open on each monitor would be really
nice.

teammatt3,
I am like Brendon, I am not sure if I am following you. Are
you trying to open two pages in Dreamweaver? Or are you trying to
say that you want to see two pages in two monitors.
But the question you are asking is not really very clear.
Why are you asking for two Dreamweaver programs (such as DW 8
and legacy version like DW MX 2004) to run at the same time and
compare. It doesn't make any sense to me. I am not sure what you
are trying to accomplish this task and for the specific reason?
I am rather perplexed with your situation.
quote:
Originally posted by:
teammatt3
I used the wrong terminology, I want two programs open not
just windows.
That works better than what I had, but I still would like to
have two dreamweaver
programs open at the same time. You know how you can two
notepads open at the same time? I want that but with dreamweaver.
That does help a lot Brendon, I never even look at that menu
before.

How to let two programs access the same BDB data

I want to use two programs to access data in one BDB database, but get this error
multiple databases specified but not supported by file
db open failed:Invalid argument
I do not know how to deal with it.....
anyone can help?
thank you first

Hello,
Can you clarify a bit more as to what you are doing?
A message like:
multiple databases specified but not supported by file
open: Invalid argument
is expected when you are incorrectly creating multiple databases
within a single physical file.
The details are at:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am/opensub.html
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_open.html
It is possible to contain multiple databases in a single physical file
but the application has to follow some steps in order to do that.
For example you can not attempt to open a second database in a file that
was not initially created using a database name. Doing will generate
the error you posted.
Thanks,
Sandra

Two main windows in smartform or two loops in one main window?

Hello All,
I have requirement in smartform where i want to print two diffrent data header and item data in the same page.
and in between these two data i want one template to be printed for item data .
Smartform is giving me error if i use two main windows
if i use two loop nodes in the main window thn how to restrict the data getting over flowed to template(item data)
scenario is
header data****
**item header**
item data****
Pls comment....
Regards,
Sunny

As main window can only be one, so try it this way:
Under main window create a TEXT1 for header text( first header) than a LOOP1 for looping the header table, under that first create a TEXT2 for header data, than below it create another TEXT3 for header text ( Second header), than below it add a LOOP2 for looping item table and in that add a where condition than under it a TEXT4 for item data .
MAIN_WINDOW
    TEXT1                                     " first header
    LOOP1                                    " header table
        TEXT2                                 " header data
        TEXT3                                  " Second header
        LOOP2                                " item table with where condition
            TEXT4                             " item data
With luck,
Pritam.

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent"....

I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent". How do I close these programs?

If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
Parallels has a forum here:
http://forum.parallels.com/forum.php
I think you'll get a faster response there.

Can I open two Safari windows at the same time?

Can I open two Safari windows at the same time and split the windows in two on my screen? Right now, I have to open Safari and Firefox to get the split screen. I know I can press command to get multiple tabs, but that's not what I want. I want to use Safari on two open windows.

HI,
Open a browser window in Safari. Then Command + N
Press command and ~ or ` to toggle between the windows.
Carolyn

Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as two other Windows computers (one running 7 and one with Vista)?

Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as to store information from two other Windows computers (one running 7 and one with Vista)?

Yes you can but you need to partition the drive into at least 2 separate drives.
To do that you need to use a Windows PC to do the first partitioning. Say you split the drive into two partitions each 1TB (or close to 1TB) each.
Partition fand format both partitions on a Win PC as one NTFS and the other FAT32.
Then move it to the Mac and Reformat the FAT32 partition Mac Extended (Journaled) with a GUID Partition Table.
I have that same drive and that is what I did originally with it. I now have it just for the Mac as I have other externals for the Win systems.
Good Luck.

Two Program Windows?

Similar Messages

Maybe you are looking for