Two purchasing organisations for one user

Hi Experts,
We are running SRM 4.0, extended classic scenario with a large international setup.
I have an issue with purchaser that need to be able to shop for two different pur. orgs. in two different company codes (A & B).
I have added both A & B in the Company Code attribute for the user.
And I have made both the local purchasing groups for A & B responsible for the purchaser.
When I create a SC I can select whether to use Company code A & B and I can select the matching Purchasing Group. When I finish the shopping cart the order is created in SRM with correct the Local Purchasing Organisation which the Pur. Group I chose belongs to.
But when it is tranfered to R/3 it is allways assigning pur. org. A. (also if the order in SRM has local pur. org. B). This results in a error, if the purchase wants to make a purchase for Company B.
Is it not possible in SRM to able to chose more than one backend pur. org.?

Hej igen, Anders.
I don't suppose you have found a solution here?
What I was thinking is, that you should try using the GUID of the purchase order from SRM and use it in the function module BBP_PD_PO_TRANSFER_EXEC_V2 to test which data are getting sent from SRM to R/3. You know you can find the GUID of the PO from transaction BBP_PD with BUS2201, and this GUID is the only thing needed to test the function module. This FM is sending your shopping cart/PO data from SRM to R/3, so if you can debug this to see that here the p org is correct, you would know that the error occurs in R/3.
On the other hand you could also see in BBP_PD for the purchase order in SRM if the p org is already wrong here?
Cross buying is possible, so hopefully you get to find your error. Otherwise post a reply here, we'll figure something else out.
BR
Dennis

Similar Messages

Is it possible to link two ad accounts for one user in OIM

Hi,
We have two AD accounts, one admin account and one user account. Is it possible to link these two accounts to one user in OIM?
Thanks in advance

Hi Nayan,
one account is user account and the other one is admin account. so both having different samaccountname , and my recon rule is oimuserid=samaccountname. in this case what we need to do?
thanks

I purchased Illustrator for one month but when trying to run the application, it asks me to "renew the subscription". I tryed to reload illustrator two times and reloaded CreativeCloud but still it doesn't work. What else can I try? I need AI immediately

I purchased Illustrator for one month but when trying to run the application, it asks me to "renew the subscription". I tryed to reload illustrator two times and reloaded CreativeCloud but still it doesn't work. What else can I try? I need AI immediately for work

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

Default Purchasing organisation for Purcashing Document type

Dear Gurus,
I need to make default Purchasing organisation for Purcashing Document type. How to configue this. Please advice me.
Thanks
RS

Hi,
You can do it with Personal Setting option which is available in purchase order header level.
Click on this button, Go in Defaults Values.
Enter material type, purchasing org. and other required detail.
Then always at the time of purchase order creation you got same material type and purchasing org.
Note: You can do it for only one material type and purchasing org.
Regards,
Mahesh Wagh

UWL Subview does not show for one user

Hi All - We have a UWL Subview. It is working fine except for one user. He cannot see the entire Subview drop down box at all. It is as if it does not exist. I've verified he has the tasks for the Subview to appear. Can anyone give some ideas as to what other possibilities this can happen? I've tried several things. Verified with security no roles exist for functionality within the UWL. The user have tried going to our QA system and logged in as a test user id - Subview visible. His ID is valid and active in ECC. If you don't have a direct answer, maybe you know of tools on how to debug or trace the UWL. I've seen two threads exactly like my situation and they receive no responses. Hopefully, there is something new to my request.
Thanks in advance.

The issue is resolved. In the Portal UWL Admin screen, the user showed personalization settings for the Subview. We decided to delete all entries. He can now see the Subview drop down. It is weird because on his own his access to his own personalization settings is empty.

Hello CS Community: I am about to renew my cloud subscription for one year. My current subscription is for one user for both Mac (and) PC. When I pay for this, how do I know I'm getting a subscription for both my MAC and PC? It's not clear what is being p

Hello CS Community: I am about to renew my CS cloud subscription for one year. My current subscription is for one user for both Mac (and) PC. When I renew, how do I know I'm getting a subscription for both my MAC and my PC? It's not clear what is included in the purchase. I'm choosing the 49.00 a month package. Any insight would be much appreciated.

Hi ShearLine,
The Creative Cloud subscription is not OS specific as it's licensed via your Adobe ID.
You can purchase a single subscription and use it on 2 machines irrespective of it being Windows or Mac.
Regards,
Rave

Can you have two iCloud accounts for one Apple id?

Can you have two iCloud accounts for one Apple id?

the appleID is you in the ios world if you have an iphone and an ipad and an Ipod touch and an appletv and a mac then you should use 1 appleID on all of them it does not mean the same data is on all of them unless you want it to be

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
Is there a way to tell Safari what encoding to use if the web page fails to do that?

Account search functinality is not working for one user in portal

Hi friends,
We have configured E.P 7.0 with CRM 5.0 and configured CRM PCUI business package.
We have a role called <b>accounts and products</b> in portal. So accounts can be searched in this role.
Now our severity issue is for one of the super user,for ex su1, accounts search is not working in portal but the same is working in CRM GUI.
for example if we search for an account 233445(or any other account) in portal its showing no data found but if we search with the same criteria data is displaying CRM GUI.
We have checked with other 2 super ids. Both ends portal and gui search is working fine.
Am unable to figure out whats the cause of the issue as search is not working only for one user su1 .
we have checked by restarting the server also to clear the memory cache.But still search is not working in portal.
Could anyone of u please advice ASAP as this is severity issue.
Thanks & Regards
Sireesha.

Hi srinivas,
I have checked both the users credentials,permissions,groups in the GUI and also in the portal.
Both of the users profiles are assigned as same.
Could you please advice is there any other way to check it out?
Regards
Sireesha.

JSP page doesnt load for one user on machine1, but does 4 all on same box

Hi,
I have a Citrix application on a box to enable many users to connect remotely to different applications on differnt boxes using the browser on this box. Just like terminal Services or remote desktop
I tested 15 users and all of them are able to login to the machine and able to open a jsp page of an application located on a differernt box using the browser on this box.
But for one user I am facing an issue. For this user, I am not able to get the page and instead I only see a message as "page loading" and nothing more than that, Its getting stuck there itself with no progress.
Please help me,
Thanks a lot in advance,
Srinivas.

Hi,
I suspect there is something missing as far as the JRE for this guy is concerned. Sothing to do with permissions. java policy, security etc.
I am not sure if that helps. I am not in the development of the application, and will check with those guys. I only neeed to provode support on this machine and be able to give access to that application which is on Linux. The browser is in Windows machine,
Thanks,
Srinivas.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

OBIEE/EBS R12 - works, except for one user - ORA-06512 error

OBIEE 10.3.1.4 / EBS 12.0.4
Oracle 11g
HPUX 11.31 64 bit Itanium
We are successfully using EBS integration with OBIEE, but for one user that we have created it doesn't work. When they try to access OBIEE from EBS we get this error in NQServer.log:
*[nQSError: 13011] Query for Initialization Block 'EBS Security Context' has failed.*
*[nQSError: 17001] Oracle Error code: 6510, message: ORA-06510: PL/SQL: unhandled user-defined exception*
ORA-06512: at "APPS.APP_SESSION", line 313
at OCI call OCIStmtExecute: call / 101507300 */ APP_SESSION.validate_icx_session('NIOWQbvOlCFpGilcGDvlBIY-:S').*
*[nQSError: 17011] SQL statement execution failed.*
This is when the query is run against EBS to authenticate the user:
select FND_GLOBAL.RESP_ID,
FND_GLOBAL.RESP_APPL_ID,
FND_GLOBAL.SECURITY_GROUP_ID,
FND_GLOBAL.RESP_NAME,
FND_GLOBAL.USER_ID,
FND_GLOBAL.EMPLOYEE_ID,
FND_GLOBAL.USER_NAME from dual
It is only for one user that has the problem. All others users work fine.
Has anyone else seen this problem?
Our EBS DBA has checked that the above sql can be run with the session set to the problem user, and compared with a user who can successfully connect to OBIEE. The results were the same for both.

I was on the wrong lines with this one.
The error in the NQServer.log was not from the problem user, it was a separate user.
The real cause of a specific user not being able to login was a corrupt web catalog (which we're still trying to resolve)

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

Two purchasing organisations for one user

Similar Messages

Maybe you are looking for