Two questions about ATI RADEON HD 3870

I've been in touch with macsales.com and they recommend the ATI RADEON HD 3870 for the Mac Pro Xeon (late 2006-2007) running 10.5. But they were unable to answer w/ 100% certainty:
1. That all I need to connect this card (it has 2 DVI ports) to my Samsung SynchMaster with one DVI cable connected "DVI to DVI" and one VGA - WITH - a DVI to VGA adapter on the VGA cable.
For those who don't know, the Samsung monitor must have both DVI and VGA connected to operate.
2. I've read on this (Displays) forum that this card will only work "up to" 10.5 and won't work if I upgrade to 10.6. Is this correct? Also, is there a chance that Apple will "correct" 10.6 to work with the HD 3870 in a future point release? (I'm not yet willing to jump to 10.6, so this is for the near future when I do.)
Less important "#3" question: is it possible to make the HD 3870 backward compatible with 10.4? I ask because I'm running 10.4 on a separate internal drive so that I can continue to use some older apps for mission critical tasks. Eventually, I still plan to get rid of 10.4 - it's just not possible right away.

Thanks for the added input on the 3870. I also got confirmation that the "dual connection" (AVG + DVI) on the Samsung display can be worked out with an adapter.
But I've made up my mind: there's just too many counter-balancing factors. I'm pretty sure now that I can wait to see if the Geforce 7300 burns out. If it does so in the next 290 days, I'll just have Apple replace it for free since my AppleCare would take care of the cost.
I'm a retired purchasing agent so this 're-deciding' (with a lot more at stake) is normal for me. In this case (mine), I no longer see much advantage in having Snow Leopard. It's still new and needs at least one more upgrade / debugging release. Besides: I haven't mentioned that I have other ways I haven't used to boost the Mac Pro's performance.
As a "compensatory purchase" I just placed an order for two more RAM modules which will fill remaining RAM slots. That alone will give me a little more juice (as you say). These cost one-third that for a new graphics card (or less). This should tide me over - still running 10.4 and 10.5 on two drives. When my Apple Care runs out, I may well be in a position to buy a new Mac Pro with mature Snow Leopard, better graphics card, etceteras.

Similar Messages

  • Question about ATI  Radeon X1900

    I have the ATI Radeon X1900 (512mb) and the fan on the card runs consistently... as in never stops unless the machine is asleep or off.
    Is this normal behavior for this card?
    I have a MacPro 8Core and a 30" Cinema Display.
    I appreciate any insight.
    MacPro   Mac OS X (10.4.9)   30" Cinema Display

    Yes, it's audible although how much depends on your environment and hearing. Like you I wish mine were quieter but I'm used to it now.

  • Questions about ati radeon 2600 on an 2006 mac pro

    I know the debate has been going around for awhile about these cards, Apple claims that they are not supported but my card runs as long as you have leopard installed. So far the card has performed great, all my games and graphics programs run beautiful with it but I do have two problems. One is I can only have my display set at 1400 x 1050 any lower setting results in severe blurring on the screen. The other problem is that the text on my screen is some what pixelated and blurry.
    I was wondering if there is a fix for this problem or is it just the price I have to pay for running it on a 2006 mac pro.

    If it is a problem, and you can afford another upgrade, the Radeon 3870 might be your best choice.
    http://www.barefeats.com/harper17.html
    http://www.barefeats.com/harper18.html
    http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10876&Item=ATI100435928

  • DKA790GX and Visiontek ATI Radeon HD 3870 OCE Cards

    Okay I have a MSI DKA790GX motherboard. (MS-7550 v1.21) with latest BIOS 1.9 loaded, a Phenom X4 9550 CPU, 8GB RAM, and 2 Visiontek ATI Radeon HD 3870 OCE Cards.
    Without any drivers installed, everything works fine. With both cards in and set up with the crossfire connection installed, you can't even complete the installation of the catalyst drivers without it locking up.
    This is in Windows 7 64 bit, and have tried both Ultimate and Professional, just for kicks. With just one card installed, driver installation completes successfully and everything works as normal. With the drivers installed first like this, if I then install the second card i get a blue screen on ATIMKDAG.sys. I have tried switching the order of the cards to verify that each card works by itself.
    I have also tried both the latest catalyst 10.2 drivers and the manufacturers drivers which are 9.something
    I have the same 2 cards in a K9A2 Platinum running fine on Vista Ultimate 64 and now I am somewhat afraid to update it to Win 7.
    About the only thing I haven't tried yet is to do the same setup in a Win 7 32 environment to see if it's any different. but a quad core CPU and 8GB RAM is kind of wasted on a 32 bit OS.
    Has anyone had any similar experience with this? I am not sure where the blame is, but I suspect it is in the ATI drivers and not the OS or the motherboard.
    I am open to any suggestions.

    Quote
    About the only thing I haven't tried yet is to do the same setup in a Win 7 32 environment to see if it's any different.
    Try it
    Quote
    MS-7550 v1.21) with latest BIOS 1.9 loaded, a Phenom X4 9550 CPU, 8GB RAM, and 2 Visiontek ATI Radeon HD 3870 OCE Cards.
    How much memory sticks? Exact models? In which DIMM's are installed?
    PSU? Brand and details?[look for them over PSU sticker]?

  • ATI Radeon HD 3870 Graphics Card for Mac debuts

    http://www.pcworld.com/article/id,147040-c,graphicsboards/article.html
    AMD on Thursday announced the ATI Radeon HD 3870 for Mac and PC Edition. The new card is expected to ship at the end of June for US$219.
    The card works in the PCI Express slots of both first-generation and second-generation Mac Pro systems, and features 512MB of 256-bit GDDR4 frame buffer memory and 320 stream processors. It's designed as a graphics upgrade for Mac Pros -- even those that may have come equipped with the Nvidia GeForce 8800 card introduced earlier this year. AMD claims its new Radeon card runs faster and costs less than the GeForce 8800 GT, which is only available from the Apple Store and costs $279.
    The graphics processor can crank up to 70 gigabytes per second bandwidth using a 775MHz engine. That translates, according to AMD's internal benchmarks, into *30 to 180 percent better performance in Apple's Motion 3 software than the GeForce 8800*; slow Motion performance has been an Achilles' heel of Nvidia's rival card since its introduction.
    http://ati.amd.com/products/radeonhd3800/macpc/index.html

    Rob has it benchmarked:
    http://www.barefeats.com/harper16.html
    I'm going to definitely buy this as soon as it's online. I'll order it through Rob's link too to reward him for all the work he's done on this issue.
    Now, how about a refund on my GeForce 8800 upgrade, Apple?

  • ATI Radeon HD 3870 Mac&Pc edition  and Accelero S1

    I just installed the ATI Radeon HD 3870 Mac & Pc edition on my Mac Pro (first edition).
    While the fan on the card is not very loud and acceptable I would like to take the fan out and install the Accelero S1 cooler instead ( http://www.arctic-cooling.com/vga2.php?idx=138&data=7&disc= ).
    Has anyone installed one (accelero s1) lately?
    Any objections?
    Thank you for your input.
    Eugene

    Just installed this. It's great, quiet. Took about 20 minutes. Take your time and the install is easy. I didn't use the spacer clips as they're not necessary, and a bit hard to install. I ordered the Artic cleaning and prep solutions and I'm glad I did. Good luck.

  • Two questions about Risk Management 2.0

    hi experts,
    Please find below two questions about Risk Management:
    -In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
    include "/ORM/LORM_API_SERVICESU10 " in
    line 97:
    "Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
    "parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
    "bel."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    Do you know where it could come from?
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?
    Thank you !
    Regards,
    Julien

    Hi Julien ,
    I have the same error what u described as :-
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?    "
    Are you able to solve this. Please let me know how to resolve this???
    Thanks
    Regards,
    Atul

  • Two Questions about Airport Express

    All, I am a recent convert to using a Mac so bear with me.
    I have two questions about the Airport Express.
    Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
    Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
    Any help and advice gratefully received.

    Tesserax wrote:
    Hello andixbox. Welcome to the Apple Discussions!
    Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
    Yes, but at least two things to consider:
    o The US version of the 802.11n AirPort Express Base Station (AXn) only supports radio channels 1-11 in the 802.11g radio mode. Channels 12-14, used in other countries outside the US will not be available.
    o The AXn supports both the 2.4 and 5 GHz radio bands for 802.11n. The 5 GHz band is restricted in certain countries (like the UK) so operating in this mode may get you unwanted attention.
    That should be okay then because the Netgear broadcasts on channels 1-11. I hadn't appreciated the 5 Ghz band, but having checked both US and UK Apple sites the techspecs both mention 2.4 Ghz and 5 Ghz.
    Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
    If your intent is to have the AXn join the Netgear as a wireless client, then yes it should work. The "$" requirement was for WEP. This shouldn't be necessary for WPA or WPA2.
    I intended to use the AXn as an range extender, but you mention wireless client, is that something different?

  • Two questions about SG300 DHCP server

    Hi,
    I have two questions about the DHCP server on the SG300:
    On the Address Binding page, what does the "Declined" state mean? I have a NAS device that won't pull an address, and I think that the entry with a state of "Declined" corresponds to this device. It was previously pulling an address from a RV180, so the only difference is that it is now connected to the SG300. I worked around this by manually setting the address on the NAS device, but this won't scale if I run into a lot of other devices that can't pull an address.
    I configured a static address binding for a WAP321 and found that instead of pulling the configured address that it pulled a dynamic address. I checked the Address Binding page and see that the dynamic entry that corresponds with the WAP321 has a Client Identifier rather than a MAC address. I changed the static entry for the WAP321 to use the client identifier displayed in the dynamic entry, and now the WAP321 pulls the configured static address. Is this expected behavior?
    Thanks,
    Bob

    With the SX300/500 it is required the client identifier, it doesn't automatically insert it. If static DHCP is made on the switch and you didn't need client identifier, that is more or less fortunate behavior for you
    So to answer this question, the expected behavior is to configure client identifier for static DHCP entry.
    -Tom
    Please mark answered for helpful posts
    http://blogs.cisco.com/smallbusiness/

  • Two questions about the new iWeb

    Hi
    I've got two questions about the new iWeb.
    1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
    2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
    thanks

    Ah well... thanks for the quick answer
    Message was edited by: Guðlogi

  • Two Questions about Adobe CS6

    I've recently begun editing a film project and have two questions about Adobe Premiere Pro CS6 that I was hoping someone could answer.
    1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
    2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
    Thanks

    1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
    Yes.
    It will depend on the degree of lens edge intrusion into the frame,
    but an enlargement of 5-10% or so is not a big problem.
    2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
    Oh, yeah...  lots of options (including many 3rd party plugins).
    Premiere color correction
    FAQ: How do I learn Premiere Pro?
    http://forums.adobe.com/thread/878529?tstart=0
    Getting Started with Premiere Pro CS6
    http://www.video2brain.com/en/getting-started-with-premiere-pro
    Adobe Premiere Pro Help and tutorials
    http://helpx.adobe.com/premiere-pro/topics.html
    Premiere Pro CS5-CS6 Reference
    (.pdf 12 MB download)
    http://helpx.adobe.com/pdf/premiere_pro_reference.pdf

  • Two Questions About SSL

    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

  • My first two questions about SSL

    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    That error about "no jsafe" occurs if you have not applied any service
    pack at all ( as you have said ). Get the latest SP ( SP6 ) and it
    should go away.
    John
    Sergio Rios Mendoza wrote:
    >
    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

  • ATi Radeon HD 3870 for Mac is out...

    "AMD unveils Radeon HD 3870 for Mac & PC"
    AMD made a late announcement on Thursday expanding its Radeon for Mac lineup. The ATI-branded Radeon HD 3870 for Mac & PC is AMD's first 3000-series card for Macs and also one of the first to explicitly support more than one platform: users can install the card now in either a Mac Pro tower or a Windows PC and swap it to the other platform later, including for Boot Camp. As a new-generation part, the new chipset has twice as much performance per watt as the outgoing Radeon HD 2900 XT, the company claims.
    AMD's card is virtually equal to the Windows-only edition with 320 stream (pixel and vertex) processors, improved power use, and support for newer graphics shader effects either in DirectX 10.1 when in Windows or OpenGL 2.0 in OS X and other environments.
    For connections, the new Radeon HD board is built to outpace Apple's own offerings with both dual-link DVI ports that handle 30-inch displays as well as an S-video jack for analog video from TVs. AMD is shipping the card by the end of June in a 512MB version for $219 and expects it to be available at a number of Mac resellers.
    From: - http://www.electronista.com/articles/08/06/12/amd.radeon.hd.3870.for.mac -

    Realworld!
    Core Image Processing: http://www.barefeats.com/harper16.html
    Mac Games: http://www.barefeats.com/harper17.html
    PC Games: http://www.barefeats.com/harper18.html
    Summary: The 3870 is a little worse than the 8800 at games, but it's cheaper, better at Core Image, and supports Crossfire under Windows on the Mac Pro, where as the 8800 GT can't be in SLI mode on the Mac Pro, making the 3870 the best overall solution.
    Edit: I'm pretty sure it will require Leopard simply because of how Mac OS X distributes drivers generally.
    null

  • Two questions about the Nokia 920 to Nokia experts...

    Hi,
    I am considering the Nokia 920 for replacing my Apple 4. However I have two questions that nobody in a phoneshop can answer. Furthermore I can test it myself as about all Nokia 920 in shops seems to be a dummy for showroom purposes.
    Therefore I would appreciate it if somebody can answer these two questions:
    1. Which versions of MS-Office can be read on the Nokia 920? 
    2. I have heard there are some difficulties with the Nokia 920 to watch Youtube movies. Is this true? If so, what is  the solution of Nokia. If have heard to load a Metro app that solves these Youtube problems.
    I have seen many videos by now about the Nokia 920 but none does cover really these questions. Thanks for taking the time to write me an answer.
    Regards,
    Jan
    Solved!
    Go to Solution.

    Works with Office 2010 at least.
    There is at least the latest MS Youtube app to stream video without problems.

Maybe you are looking for

  • Print Copy Number

    Hi all When I print more than 1 copy of particular report, I want to print Copy Number(1st copy ,2nd copy etc...) for report first page. Please expalin how to do it Thanking You

  • Message always "scheduled"

    Hi guys, I have a problem : for one of my scenario and only for that one , my message is always in "scheduled" in the monitor, I always have to unlock the queue in smq2, to make it work. Does anybody know why it's always in this status in the monitor

  • Help in getting matrix value

    Hi How do you get a value from the matrix(example: sales order matrix) when the column is not shown. For example, getting the warehouse code of the line when the column is not shown? I tried using datasource, but they say illegal form/reserved. Any s

  • Where did the "Archive" mailbox come from and how do I ditch it

    Converting a Mac from SL to Mav and something new popped up. In the list of mailboxes below trash is one labled Archive. What is it? Where did it come from and how do I ditch it? It is empty.

  • Suddenly my phone's microSD card is not detected

    I have a Nokia 6300 which i have been using for more than a year. Suddenly last week my phone stopped detecting the microSD card (128 mb) which came along with phone. I tried taking out & re-inserting but it didnt help. I have also tried accessing it