Two questions about manually updating

Thanks.
I had read enough on these boards to know I ought to manually update my iPod rather than automatically update. But then I kept getting the "do not disconnect" flashing on my iPod. I went in to disable disk use in preferences as I'd read in some threads. It was grayed out- I couldn't disable it. I enabled automatic updates in the purchased playlists only, figuring that would limit damage of lost songs. Except it didn't. I have very few since I'm just starting out but now I'm also missing those songs in the playlist in iTunes. So...
1) How can I disable disk use AND manually update? Or should I just not be concerned about disconnecting my iPod as long as I don't hear the drive whirring, as the Apple website says?
2) I don't suppose there's any way to recover the lost songs?
TIA

No need to be afraid
Just make sure you let your iPod finish updating before trying to eject it.
And! If for some reason it seems to be disconnected (no longer appears in iTunes or Windows) but the screen still reads "Do Not Disconnect," shut down the computer and wait for the iPod to return to the main menu before you unplug it.
~Lyssa
PS-->Thanks for the green star!

Similar Messages

  • Two questions about SG300 DHCP server

    Hi,
    I have two questions about the DHCP server on the SG300:
    On the Address Binding page, what does the "Declined" state mean? I have a NAS device that won't pull an address, and I think that the entry with a state of "Declined" corresponds to this device. It was previously pulling an address from a RV180, so the only difference is that it is now connected to the SG300. I worked around this by manually setting the address on the NAS device, but this won't scale if I run into a lot of other devices that can't pull an address.
    I configured a static address binding for a WAP321 and found that instead of pulling the configured address that it pulled a dynamic address. I checked the Address Binding page and see that the dynamic entry that corresponds with the WAP321 has a Client Identifier rather than a MAC address. I changed the static entry for the WAP321 to use the client identifier displayed in the dynamic entry, and now the WAP321 pulls the configured static address. Is this expected behavior?
    Thanks,
    Bob

    With the SX300/500 it is required the client identifier, it doesn't automatically insert it. If static DHCP is made on the switch and you didn't need client identifier, that is more or less fortunate behavior for you
    So to answer this question, the expected behavior is to configure client identifier for static DHCP entry.
    -Tom
    Please mark answered for helpful posts
    http://blogs.cisco.com/smallbusiness/

  • A question about screen updation of T61

    Hi there
    I got a question about screen updation. 
    Currently, my T61's screen is 14.1 XGA TFT 1028x768, and it can't work, thus I am considering to replace it with the better 14.1" SXGA+ LCD SCREEN .
    However, I am a little concerned about the compatiblility problem, hence I just wonder whether the new SXGA+ screen can fit for my current T61 laptop or not?? Thanks a lot for your answers!
    Regards
    Peng

    you can buy it from IBM parts, and it will then sure to work for your laptop.
    Here is the manual that shows you how and what parts you need:
    http://www-307.ibm.com/pc/support/site.wss/MIGR-67979.html
    P.S. If you have warranty this upgrade will void your remaining laptop warranty, as the LCD is not CRU (customer replaceable unit). 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Two questions about Risk Management 2.0

    hi experts,
    Please find below two questions about Risk Management:
    -In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
    include "/ORM/LORM_API_SERVICESU10 " in
    line 97:
    "Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
    "parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
    "bel."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    Do you know where it could come from?
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?
    Thank you !
    Regards,
    Julien

    Hi Julien ,
    I have the same error what u described as :-
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?    "
    Are you able to solve this. Please let me know how to resolve this???
    Thanks
    Regards,
    Atul

  • Two Questions about Airport Express

    All, I am a recent convert to using a Mac so bear with me.
    I have two questions about the Airport Express.
    Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
    Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
    Any help and advice gratefully received.

    Tesserax wrote:
    Hello andixbox. Welcome to the Apple Discussions!
    Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
    Yes, but at least two things to consider:
    o The US version of the 802.11n AirPort Express Base Station (AXn) only supports radio channels 1-11 in the 802.11g radio mode. Channels 12-14, used in other countries outside the US will not be available.
    o The AXn supports both the 2.4 and 5 GHz radio bands for 802.11n. The 5 GHz band is restricted in certain countries (like the UK) so operating in this mode may get you unwanted attention.
    That should be okay then because the Netgear broadcasts on channels 1-11. I hadn't appreciated the 5 Ghz band, but having checked both US and UK Apple sites the techspecs both mention 2.4 Ghz and 5 Ghz.
    Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
    If your intent is to have the AXn join the Netgear as a wireless client, then yes it should work. The "$" requirement was for WEP. This shouldn't be necessary for WPA or WPA2.
    I intended to use the AXn as an range extender, but you mention wireless client, is that something different?

  • Two questions about the new iWeb

    Hi
    I've got two questions about the new iWeb.
    1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
    2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
    thanks

    Ah well... thanks for the quick answer
    Message was edited by: Guðlogi

  • Two Questions about Adobe CS6

    I've recently begun editing a film project and have two questions about Adobe Premiere Pro CS6 that I was hoping someone could answer.
    1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
    2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
    Thanks

    1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
    Yes.
    It will depend on the degree of lens edge intrusion into the frame,
    but an enlargement of 5-10% or so is not a big problem.
    2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
    Oh, yeah...  lots of options (including many 3rd party plugins).
    Premiere color correction
    FAQ: How do I learn Premiere Pro?
    http://forums.adobe.com/thread/878529?tstart=0
    Getting Started with Premiere Pro CS6
    http://www.video2brain.com/en/getting-started-with-premiere-pro
    Adobe Premiere Pro Help and tutorials
    http://helpx.adobe.com/premiere-pro/topics.html
    Premiere Pro CS5-CS6 Reference
    (.pdf 12 MB download)
    http://helpx.adobe.com/pdf/premiere_pro_reference.pdf

  • Questions about latest updates

    Today on my PC I had the options of updating Photoshop CC, Photoshop CC 2014, Bridge and Lightroom. I have two questions;
    1. Prior to updating Photoshop CC, the version was 14.2.1 x64, after updating, the version was the same. Is that correct?
    2. What is Photoshop 2014, I havn't updated this one yet, as I don't particularly want two versions of Photoshop.
    Also,the update choices differ between my PC and laptop
    On my Laptop, the only updates were for Photoshop CC and Photoshop CC 2014, no Lightroom or Bridge update, why would this differ from my PC?
    I used the Update feature within Lightroom to update from v5.4 to v5.5, but the update link just took me to a download of v5.4
    Can somebody please help to clarify what's going on?
    Cheers,
    Bernie

    Thanks, but this didn't really answer my questions!
    The only explanations I can find for the Photoshop 2014 version are details about it's functionality. What I'm more interested in knowing is does this replace Photoshop CC when installed or does it sit side by side, meaning I'll now have two versions - if so, why? So in a couple of years time, I'll have Photoshop CC, Photoshop CC 2014, Photoshop CC 2015 and Photoshop CC 2016.  That will be fun!
    Also, I have exactly the same Win 7 and Creative Cloud and PS licensing and versions on my laptop and PC, but the options are different in the Creative Cloud app, for example I can't update Lightroom to 5.5 on my laptop but can on my PC.
    Also, as I said in my original post, prior to updating Photoshop CC, the version was 14.2.1 x64, after updating, the version was the same. Is that correct?
    Cheers,
    Bernie

  • Two Questions About SSL

    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

  • Question about Software Updates in the Netherlands

    Hello all,
    ! am new to the Netherlands and plan to buy the Lumia 1020. I have a question regarding FW updates over here:
    Which network delivers the fastest updates generally or does the un-locked (country specific) phone get it first?
    Also, if i choose to buy the phone on contract here, after the expiry of the contract, do i have to unlock the phone or will the provider do it for me? (Assuming that the phones are locked to the network in the first place, if not, please let me know!)
    PS: I come from India, where we don't have phones on contracts and also receive updates very quickly!

    hi mate,
    generally if you want to free yourself from the constraints of networks, your best bet is to purchase an unlocked, unbranded handset from in-store or online. bear in mind that if you buy a handset from origin of another country in the EU, the warranty will still apply, but buy a 1020 that has a product code from outside the EU, then the warranty won't apply. something to be careful about.
    as for operators delivering updates faster than others, this varies between updates, and really noone is able to predict this. as for the unlocking, that is between you and your network carrier, Nokia has nothing to do with this.

  • Questions about cs6 updates

    Hi
    today I updated photoshop cs6 , camera raw 7.4 ,brigde and so on , windows 7
    well i have some questions
    1)
    camera raw 7.4
    crop tool can i change the overlay ?
    for example diagonal ?
    2)
    about the update
    help->about photoshop ->version is 13.0.1
    in help -> system info -> Adobe Photoshop Version: 13.0.1 (13.0.1.2)
    in short do i have the last photoshop update ? or the update process went wrong
    greetings

    2)
    about the update
    help->about photoshop ->version is 13.0.1
    in help -> system info -> Adobe Photoshop Version: 13.0.1 (13.0.1.2)
    in short do i have the last photoshop update ?
    Yes, you have the latest update for the perpetually licensed (non-Cloud) Photoshop version for Windows.
    http://blogs.adobe.com/photoshopdotcom/2013/06/photoshop-cs6-13-0-5mac-13-0-1-2win-perpetu al-license-updates-now-available.html

  • My first two questions about SSL

    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    That error about "no jsafe" occurs if you have not applied any service
    pack at all ( as you have said ). Get the latest SP ( SP6 ) and it
    should go away.
    John
    Sergio Rios Mendoza wrote:
    >
    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

  • Questions about Tour Updates? goes to Blank Screen and resets ???

    I have a question about my Blackberry tour Updating...
    I seem to notice my blackberry goes to a blank screen and a clock icon appears in the middle and goes around and around for about 10 minutes, what is this

    I'm having the same problem, except it's been half an hour and the da*& thing won't start up.  This is BAD.

  • Two questions about the HP Envy 700-230ea before I buy

    I'm looking at buying an HP Envy 700-230ea from PC World.  The specs I've seen don't quite answer two questions I need to resolve before committing myself.
    1.  Is the Windows 8.1 OS installed the 64 bit version (I need it to be)
    2.  The machine comes with a 2TB HDD.  But I need to add in a second 2TB HDD.  Is there scope to do this within the machine?
    This question was solved.
    View Solution.

    From your UK HP Site  I'd say it comes with 8.1/ 64bit and it has 3 internal hard disk drive bays; 2 external optical drive bays.
    Link  http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#!tab%3Dspecs
    Be forewarned HP ENVY desktops do not come with a owners manual, just quick pictorial international set up guides and there is no owner manuals available. The Windows 8.1 OS most can master, but for the computer itself no manual, it's like buying a brand new car trying to figure out all the switches, levers and indicator lamps. Most are easy to figure out but some are not   But I would contact PC World and make sure it has the 64 bit OS.
    Link  http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#!tab%3Dspecs

  • Two questions about the NavBar.

    Hi!
    Two questions please:
    1.
    I'm binding my NavBar control to a simple Array() declared at my class.
    When my class gets the event "applicationComplete" it calls a function which adds a few items to that array.
    The NavBar updates correctly.
    After a while I add more items to that array, but the NavBar doesn't update (no buttons added).
    Should I call any function to make it update and add buttons?
    2.
    I did a test: By looping, I've created 20 items in an array which is bound to the NavBar and it seems like the NavBar adds these 20 items in a row without checking if it's becoming wider than the stage.
    Is there any way to tell it "max items to display", and make it have some sort of "right/left" buttons? Let's say like IE or Firefox 's tabbing system.
    See, my app is a bit complex and I can't just put static buttons up.
    Thank you all!

    Thanks Michael,
    Look, I'm trying to use the NavBar for an application and the NavBar will be used to navigate through windows.
    Simply as that (:
    Now, you do know the Firefox or Internet Explorer browsers, right?
    When you open 20 browsing windows on them, the tab bar (they call it the "tab bar") is filled with buttons but shows only few of them, not all of them because there's no space on the screen.
    Yet, this tab bar puts two buttons from the left and the right, so the user can navigate in the tab bar to choose the current window.
    How do I do that?

Maybe you are looking for

  • Installation of upgrade

    I have DW MX 2004, and am now going to DW CS3. I really am a novice user doing my company's own sites (ie: http://www.silver100.com, and also http://www.silverfacts.com). Do I need to, or is it cleaner to, uninstall 2004 first? Will CS3 install total

  • ITunes Library & Podcasts

    I have seen posts identifying a frustration I have with the way current versions of iTunes puts Podcasts in the Music list. A helpful suggestion from other Discussion users has been to create a Smart Playlist with the exception of "Podcast" in Genre.

  • When is it advisable to delete iWork 08

    When is it advisable to delete iWork 08 if I'm running iWork 09?

  • VoIP monitoring tools - real-world application.

    We're evaluating several products for an enterprise level VoIP monitoring applications, including, but not limited to, NetScout and NetQoS. The company is undergoing a major infrastructure upgrade and going to Cisco's UCM 7.x platform and we'd like t

  • Are Security Vulnerabilities fixed by applying Oracle Server Patchsets

    Hi, I would like to know whether by applying Oracle Server Patchsets or by upgrading the Oracle Server from one version to another do we overcome the Security Vulnerabilities highlighted in the previous patchset or Oracle Server Version. For example