Two Questions about the Vision M: Zencasts and Organizing So

HI! If you can help me with these two issues I would really appreciate it. These are the only two major problems I have with my Vision M?. The first is that my songs, when I go to play them from the album are not in the order that they are on the CD, they are alphabitized... can I make it so all the songs are listed and will play in the order they appear on the CD?2. I am trying to do Zen casts, but I press the subscribe for free button and my Zencast organizer loads and then I recieve a message that says "subscription unsucessful, a connection could not be madewith the channel's server." I tried different zencasts and all wound up with the same result. Can you guys help me? I would really appreciate it!Thanks, AliciaMessage Edited by lillysha25 on 02-3-200703:23 PM

Try putting the music on your player using windows media player

Similar Messages

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Question about the notification center (Mails and Reminders)

Hello together,
I just started using Mountain Lion and now I have some few questions about the notification center.
1. Is it possible to show all reminds in the notification center? I have a lot of reminds without an date / time and they don't appear in the notification center.
2. Is it possible to show the last five Mails in the notification center? I'm just seeing new incoming mails, but I would prefer it, if I could see the last five mails
     (no matter if readed or unreaded).
Thank you very much for you help.
Ratte1988
Hallo zusammen,
ich habe gerade damit begonnen Mountain Lion zu verweden und habe einige Fragen zur Mitteilungszentrale.
1. Ist es möglich alle Erinnerungen in der Zentrale anzuzeigen? Ich habe viele Erinnerungen, die ohne Datum / Uhrzeit sind und in der Mitteilungszentrale
     daher nicht auftauchen.
2. Ist es möglich, sich die letzten fünf Mails in der Zentrale anzeigen zu lassen? Ich sehe nur neue ungelesene Mails, würde es aber vorziehen die letzten
     fünf Mails sehen zu können (egal ob gelesen oder ungelesen.)
Danke für eure Hilfe.
Ratte1988

Only reminders with dates appear in the notification center - undated ones don't. Once an email has been read, it is removed from the notification center. Apple has a feedback center where you can offer suggestions.

Two questions about the E1000 and Xbox 360

Okay this is going to be a two part questions. ( both my friend and I have the E1000 )
1st
My friend and his brother are having issues with their Xbox 360's. My friend has his xbox set to dmz mode and his brother is just using I guess we'll say the default way. And when my friend is playing any game his brother tries to play call of duty black ops and the nat says strict or moderate. Now I was reading about port range triggering and how to set it up but there are different ways some people are doing it. I've seen a few videos that the people had different settings. Whats the correct way that my friend and his brother can both play xbox 360 and not have any nat issues?
( BTW their both hook-up wired )
2nd
I'm currently using dmz settings as-well ( wireless ) My home users only uses a few devices like laptops, ipods, kindle, and just one Xbox. Now I want the optimal performance I can get. I'm currently downloading mass effect ( games on demand xbox 360 ) The game size is 6.83gb and taking awhile to download. I say I've been downloading it for over 40 minutes and I'm currently at 77%, is this normal speed? Or can I boost my speed a bit? My Internet Provider is Cablevision in NJ "Optimum Online" download is 15mbps download is 5mbps.

Xbox live will only let you connect 1 xbox for every WAN IP address. Your ISP gives you only 1 dynamic public IP which will be pass down from the modem to the router. The router gives your other devices private ip addresses.
Strictly speaking, only 1 xbox will be allowed by xbox live to connect because of the reason you only have 1 public ip. You will be lucky if you can connect two.
Anyway, you can try the steps below:
Access the page of your router
Click Admin Tab, disable UpNP.
Then trigger ports: 3074/53/88/22728/33233
2869/10280-10284/1900/1024
Click Applications and Gaming Center Tab
Click Port Range Trigger
Ex:
Application name: xbox1, xbox2
xbox1--enter port 3074 on all 4 boxes and click enable
xbox2--enter 10280 on start box and 10284 on end box, same for the other 2 boxes and click enable.
Enter all number and on the applications boxes and save

Two questions about the PSD file format specicaition

I'm a programmer dealing with a project to parse PSD files. When reading the official file format specification, I found that some fields of the file are not clarified:
1. There is a rectangle structure containing 4 fields: top, left, buttom, right. I wanna know whether these 4 fields can be negative values and is there a rule that the buttom shoud be larger than the top and the right shoud be larger than the left
2. The PSD file contains a color mode section. But if the color mode is RGB, the color mode section contians no data but a 4-byte length field whose value is set to 0. This is true for files in RGB mode 8-bit channel. But after convert the files to RGB mode 32-bit channel using photoshop, the whole color mode section is no long exist.
These two questions may be somehow technical, I would be thankful if someone can give me a hand.

1) was covered in the documentation at one time. Yes, many of them can be negative, that's why they're signed values. Valid rectangles will have the bottom greater than the top, and the right greater than the left. But you can also have empty rectangles, and sometimes invalid rectangles (because the values don't matter).
2) Not sure what you're asking... color mode is just a single enumeration for RGB, CMYK, etc.

Question about the difference between HDDs and SSDs

Hi. I currently have a MacBook (Black one) that's overheating a lot for the past few months. I'm thinking about purchasing a MacBook Pro for school because it seems to be more stable. I have a question though. What is the difference between HDDs and SSDs? Which one is better? All I know is that with my MacBook and my iBook is that I had hard drive failures (iBook hard drive clicking, MacBook hard drive sounding loud and making my computer overheat). Are hard drive failures normal with Macs?
Thank you

astoldbywesley wrote:
Is a 128GB Solid State Drive better than a 500GB Serial ATA Drive @ 5400 rpm or 500GB Serial ATA Drive @ 7200 rpm?
Depends what you mean by "better." Faster? Yes. The 500 has 3x more storage capacity.
Message was edited by: tjk

Questions about the differences between Arch and Chakra.

I'm trying to decide whether to install Arch or Chakra on my laptop. Currently, I'm running Arch on my desktop and Windows 7 on my laptop (which I plan to overwrite). My skill level with GNU/Linux is somewhat intermediate – noobs refer to me as an expert, experts refer to me as a noob. If it matters, I'm a KDE user and primarily use my computers for web browsing and python development. Anyway, I just wanted to get an objective opinion on the differences between Arch and Chakra. I have a few points that stand out to me, but I welcome any input.
-Stability
I started my journey into GNU/Linux with Debian back in 2009 due to it's stability. I really disliked Debian's ancient software and considered moving my system to Unstable. While doing some googling about Debian Unstable, I stumbled across Arch – it was love at first sight. I've been an Arch user ever since. I love the bleeding edge software, and haven't had any major problems since I originally installed it. However, every time I run a system update I cringe a little. While Arch hasn't broken on me yet, I've read plenty of horror stories and it makes me uneasy. I understand that Chakra is a mix between a point and rolling release model. Is it any more or less stable than Arch? I know there are other distrobutions out there, but I'm in love with the Arch philosophy.
-Security
Pretty self-explanatory, but is there any difference in security between the two?
-AUR
As much as I love Arch, I wouldn't be able to stand it if it weren't for the massive collection of software available in the AUR. While I'm perfectly capable of compiling software myself, I prefer to use a command like tool like yaourt to manage my software. I understand that Chakra doesn't officially support the AUR and that they have their own user repository. Seeing as Chakra is still relatively new, is it lacking? Will I miss the AUR as a Chakra user?
-Repositories
Is there much difference in the official repositories between the two distrobutions?

avonin wrote:
I'm trying to decide whether to install Arch or Chakra on my laptop. ... I'm a KDE user ... I just wanted to get an objective opinion on the differences between Arch and Chakra..
-Stability...
-AUR...
-Repositories...
My take on Chakra is that it's the same as Arch with different developers. They use pacman. They have a different and rather nice build system for their developers. They're doing a good job, but I'd hate to give up the services of Allan McRae who must work full time keeping the Archlinux core and toolchain up to date. Chakra devs probably piggy-back off his work.
As for "semi" rolling: I don't see Chakra as having a stable core. A stable core sounds attractive, it would be like NetBSD which has a very stable core Unix operating system with apps added via pkgsrc. But Chakra's core and toolchain is at the same version levels as Archlinux most of the time and are no more tested and stabilized than ours. Their core packages are updated piecemeal just like ours; there is no stable core that is released as a unit (afaik). Today Chakra has gcc 4.7 / glibc 2.15 just like ours. Their kernel is a little more stable: they're using udev 181 / linux 3.2.8 while Arch is on udev 182 / linux 3.3.7. They are more conservative in upgrading xorg and the video drivers than Arch. For example, today they're on xorg-server 1.10.4 / intel video 2.17 while Arch is up-to-the-bleeding-edge-minute with xorg-server 1.12.1.902 and intel video 2.19. Yeah, I would consider Chakra to be a little more "stable" than Arch mainly because of their relaxed pace in changing the kernel and the xorg stuff.
Most of the patches that I look at for Arch packages (I build my system entirely from source and try to build monthly releases for myself) are needed because we use more recent core packages like glib2/glibc/gcc than the developers of higher level stuff like qt. Chakra is in the same situation. We're on the front of the wave
The Chakra CCR is compatible with the Arch AUR and mainly draws from AUR (an AUR buildscript will usually work fine on a Chakra system -- they just add one or two additional info fields.) With a little effort you could get any package installed on a Chakra system that is available on Arch.
Last edited by sitquietly (2012-05-24 20:43:58)

Two Questions about the SRP527W

Hello all,
The SRP527 is working fine with VPN however I can't ping my local netwerk on the client side.
The IP addres range is the same as from the remote side only start from 240.
My internal IP addresses are:
On the side where the router is:
10.10.56.1 <> default gateway from the router
10.10.56.3 <> a Server all the devices there are working and can map to local drives.
Local:
After connect the VPN I get IP address 10.10.56.240 who also become my default gateway.
Ping to a local printer on 10.10.56.110 give a reply from 10.10.56.1 destination can't be reached
In the client software I can mark Allow local LAN Network. It make no difference still not possible to ping local.
Second question:
Can I remote install the new firmware without getting problems with my VPN line? Can I still acces the router from remote even after update the firmware?
Thanks for your time to read this

Hello Luis Arias,
Thank you for giving me support on the issue.
About the suggestion to change the subnet mask on one side, which I did:
In the router a start address 10.10.56.240 is set with a subnet mask 255.255.0.0 when try to change that subnet mask to 255.255.255.0 the network address is already existent.
Playing with the IP number does not give met the final result 10.10.56.240 with subnet 255.255.255.0 so I needed to leave it with the subnet mask 255.255.0.0
I changed the client side to 10.10.56.20 with subnet 255.255.255.0 and marked the selection allow local LAN.
After make the connection with the VPN I get 10.10.56.240 as local address which also becomes my default gateway.
Still not possible to ping the local printer 10.10.56.110 and get from 10.10.56.1 destination can't be reached
The 10.10.56.1 is the VPN router default gateway address.
Hope it give you enough information to help to solve my problem,
Greetings,
Ronald

Two questions about the HP Envy 700-230ea before I buy

I'm looking at buying an HP Envy 700-230ea from PC World. The specs I've seen don't quite answer two questions I need to resolve before committing myself.
1. Is the Windows 8.1 OS installed the 64 bit version (I need it to be)
2. The machine comes with a 2TB HDD. But I need to add in a second 2TB HDD. Is there scope to do this within the machine?
This question was solved.
View Solution.

From your UK HP Site I'd say it comes with 8.1/ 64bit and it has 3 internal hard disk drive bays; 2 external optical drive bays.
Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#!tab%3Dspecs
Be forewarned HP ENVY desktops do not come with a owners manual, just quick pictorial international set up guides and there is no owner manuals available. The Windows 8.1 OS most can master, but for the computer itself no manual, it's like buying a brand new car trying to figure out all the switches, levers and indicator lamps. Most are easy to figure out but some are not But I would contact PC World and make sure it has the 64 bit OS.
Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#!tab%3Dspecs

Two questions about the NavBar.

Hi!
Two questions please:
1.
I'm binding my NavBar control to a simple Array() declared at my class.
When my class gets the event "applicationComplete" it calls a function which adds a few items to that array.
The NavBar updates correctly.
After a while I add more items to that array, but the NavBar doesn't update (no buttons added).
Should I call any function to make it update and add buttons?
2.
I did a test: By looping, I've created 20 items in an array which is bound to the NavBar and it seems like the NavBar adds these 20 items in a row without checking if it's becoming wider than the stage.
Is there any way to tell it "max items to display", and make it have some sort of "right/left" buttons? Let's say like IE or Firefox 's tabbing system.
See, my app is a bit complex and I can't just put static buttons up.
Thank you all!

Thanks Michael,
Look, I'm trying to use the NavBar for an application and the NavBar will be used to navigate through windows.
Simply as that (:
Now, you do know the Firefox or Internet Explorer browsers, right?
When you open 20 browsing windows on them, the tab bar (they call it the "tab bar") is filled with buttons but shows only few of them, not all of them because there's no space on the screen.
Yet, this tab bar puts two buttons from the left and the right, so the user can navigate in the tab bar to choose the current window.
How do I do that?

Two questions about the Nokia 920 to Nokia experts...

Hi,
I am considering the Nokia 920 for replacing my Apple 4. However I have two questions that nobody in a phoneshop can answer. Furthermore I can test it myself as about all Nokia 920 in shops seems to be a dummy for showroom purposes.
Therefore I would appreciate it if somebody can answer these two questions:
1. Which versions of MS-Office can be read on the Nokia 920?
2. I have heard there are some difficulties with the Nokia 920 to watch Youtube movies. Is this true? If so, what is the solution of Nokia. If have heard to load a Metro app that solves these Youtube problems.
I have seen many videos by now about the Nokia 920 but none does cover really these questions. Thanks for taking the time to write me an answer.
Regards,
Jan
Solved!
Go to Solution.

Works with Office 2010 at least.
There is at least the latest MS Youtube app to stream video without problems.

Question about the HDV 1080p30 preset and Encore.

I shot video on a Canon H1 set to HD 30p and recorded it onto DVC tape. I then captured the taped footage off the Canon H1 and into Premiere CS3 using the HDV 1080p30 preset. I believe that the HDV 1080p30 shot from the Canon is 1440x1080 when compressed onto tape.
I want to export to Encore CS3 to encode the video and create a Blu-Ray disc of the 1440x1080p30 video i just edited in premiere. The problem is that Encore CS3 has no 1440x1080p 30 preset. Encore CS3 has 1440x1080p 23.976 and 1440x1080p 24. The closest preset is 1440x1080i 29.97 but thats interlaced. I was hoping to keep the video in progressive mode but you have to convert it to 23.976 or 24 fps.
According to the specs, High-definition video may be stored on Blu-ray ROM discs with up to 1920x1080 pixel resolution at up to 60 frames per second interlaced or 24 frames per second progressive.
What's the point of being able to shoot and edit in p30 just to have the encoder force you to convert back to p23.976, p24, i29.97 or i59.94 fps?
Or is i29.97 the same as p30 when the video is originally shot in 30p?
Is this just an oversite?
Do i just select the 1440x1080i 29.97?

Yes, shooting 30p with 1/60 shutter speed would require more light but would give you less motion blur. But you'd have the same issue even if you shoot in 60i since the default shutter speed for 60i is 1/60.
The canon H1 can record HD in 60i, 30f, and 24f but converts the output to 60i except when the HDV/DV terminal is set to HDV in 24f mode, then the signal is output in 24fps progressive.
So in my case, whether i shoot in 60i or 30p, the playback signal is converted and output at 1440x1080i 60i.
The dilemma is that LCD, DLP and Plasma HDTV's are all progressive. So whatever you feed it, i or p, it gets converted to p for viewing. The problem is feeding an LCD, DLP or Plasma HDTV a true interlaced signal (A frame = AB fields) won't look as good as feeding it progressive signal (A frame = AA fields). Lines and edges appear stepped or jaggy.
So the issue is whether to shoot 1440x1080 in 30p with a shutter speed of 1/60 or 60i with a shutter speed of 1/60. Either way, it gets output via the HDV terminal (IEEE 1394) into premiere as 1440x1080 60i.
With consideration to the final display device, i.e. LCD, DLP and Plasma HDTV's and monitors, the only option would be to record in 30p with shutter speed of 1/60 if your shooting lots of movement like a dance recital to reduce the motion blur and 1/30 for normal shoots. Recording in 60i for output to a progressive HDTV or monitor would, i my opinion, produce somewhat blotchy jaggy video frames because the frames are averaged from two fields with slightly different images.
Also, since the H1 playback signal is output as 1440x1080 60i, does it matter whether i choose HDV 1080i30 (60i) or 1080p30 for a new project preset in Premiere CS3 prior to capturing the footage? If you shot in 30p, probably not, since the Premiere CS3 capture would still result in A frame = AA fields anyway. But since Encore nor the Blu-Ray standard support 1080p 30 (29.97fps), the choice is made for you - 1080i30 (60i) for the Premiere preset and 1080i 29.97 for Encore preset. You could select the HDTV 1080i 29.97 Encore preset if you want to upscale the 1440x1080 to 1920x1080.
Either way, the end result is that shooting in 30p and capturing, editing and encoding in 1080i 29.97 will still deliver A frame = AA fields and a better progressive image on a progressive LCD, DLP or Plasma HDTV or monitor without the conversion or stepped and jaggy lines that a true interlaced image would show.
So, the bottom line, in my opinion, is... If your shooting with a Canon H1 and will be showing you work on an LCD, DLP or Plasma HDTV or monitor, shoot in 30p at either 1/30 or 1/60 shutter speed then edit in Premiere, encode in Encore and produce your Blu-Ray dvd in 1080i 30 (29.97).
Obviously, if you shooting a film or want your work to look like film, shoot in 24p by all means.
Also... Let me know if you disagree on any points.

Two questions about the Lenovo T61

Does it have that flashlight thing on top, so in the dark you can turn it on and see your keyboard. Also does it have a built in mic.
Solved!
Go to Solution.

Yes, it has a ThinkLight.
Yes, it has a micro.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Question about the Apache plug-in and WL server

We have a bunch of Weblogic app-servers, and I want to set up Apache servers to
front-end them. Here is what I'd like to do:
(1) Load balancer forwards requests to one of Apache servers
(2) Apache serves the static content (html,gif,css etc.)
(3) Apache servers forward the request to one of the alive Weblogic servers, with
requests for the same Weblogic session should preferably stay with the same Weblogic
server.
The catch is that we are not using Weblogic clustering - we have our own application-specific
light-weight clustering (virtually no replication of dynamic state). All I want
is that the Apache plug-ins keep forwarding the packets to the same Weblogic server
for a session (unless the server dies), and that thsi property hold even if multiple
client requests (for the same session) are rotated across multiple Apache servers.
The first is really important, the second just nice-to-have (I can setup load-balancer
with sticky sessions if needed).
The Apache plug-in documentation seems to suggest that we must use Weblogic clustering
for us to be able to specify multiple Weblogic servers in the plug-in config file,
but is that really required?
Second, does the session cookie uniquely identify the Weblogic server or does
the Apache plug-in keep the mapping between the cookie and the server? Also, does
this answer depend on whether we use Weblogic clustering or not?
The answer depends on the protocol between the Apache plug-in and the Weblogic
server. Is it documented? Available under NDA?
Your help will be really appreciated!!
thanks
-amit

is that the Apache plug-ins keep forwarding the packets to the same Weblogic
server
for a session (unless the server dies), If the session id is found in the cookie, request or postdata (in that order),
the plugin will preserve the sticky session.
and that thsi property hold even
if multiple
client requests (for the same session) are rotated across multiple Apache
servers.The rules apply to all apache instances as the single instance.
BTW, the preferred server from the session has to be in the serverList(you defined
in the httpd.conf). You are not using clusters in the backend hence the server
list will not be updated
dynamically. The plugin will not know the changes in the backend without modifying
the httpd.conf and restarted.
The first is really important, the second just nice-to-have (I can setup
load-balancer
with sticky sessions if needed).
The Apache plug-in documentation seems to suggest that we must use Weblogic
clustering
for us to be able to specify multiple Weblogic servers in the plug-in
config file,
but is that really required?
It's a recommended configuration, but not mandatory.
Second, does the session cookie uniquely identify the Weblogic server
or does
the Apache plug-in keep the mapping between the cookie and the server?The server info is in the cookie for the same client although
the plugin also maintains a list of servers.
Also, does
this answer depend on whether we use Weblogic clustering or not?
No.
The answer depends on the protocol between the Apache plug-in and the
Weblogic
server. Is it documented? Available under NDA?
Your help will be really appreciated!!
We only support http and https(60sp1 or later).

Two Questions about the Vision M: Zencasts and Organizing So

Similar Messages

Maybe you are looking for