Two questions about Z77A-GD65

Hi.
4 days ago I bought MSI Z77A-GD65 motherboard. I dont have CPU/GPU yet. I checked the "compatibility chart" for my Patriot memory: (PXD38G1600LLK) and I found them there as "OK". I got two questions:
1. I found on this board that my RAM is not compatible with first bios, is it true?
2. Is there any way to check which bios do I have without a CPU/GPU ? (or all motherboards have a first bios installed ?)

Quote from: xmad on 26-August-12, 04:06:16
Like Bernhard says, I suggest leaving it alone until all your parts arrive. Then assemble the machine properly after reading the directions and see how it goes.
It very well may boot up just fine w/ even the old bios and allow you to flash. Then again you may have to borrow some different ram to flash, just wait and see.
Don't get your self all worked up before you even know if there is a problem. Have fun!
Ye, thanks I found this ram on compatibility chart, so I hope it'll be fine

Similar Messages

  • Two questions about Risk Management 2.0

    hi experts,
    Please find below two questions about Risk Management:
    -In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
    include "/ORM/LORM_API_SERVICESU10 " in
    line 97:
    "Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
    "parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
    "bel."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    Do you know where it could come from?
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?
    Thank you !
    Regards,
    Julien

    Hi Julien ,
    I have the same error what u described as :-
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?    "
    Are you able to solve this. Please let me know how to resolve this???
    Thanks
    Regards,
    Atul

  • Two Questions about Airport Express

    All, I am a recent convert to using a Mac so bear with me.
    I have two questions about the Airport Express.
    Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
    Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
    Any help and advice gratefully received.

    Tesserax wrote:
    Hello andixbox. Welcome to the Apple Discussions!
    Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
    Yes, but at least two things to consider:
    o The US version of the 802.11n AirPort Express Base Station (AXn) only supports radio channels 1-11 in the 802.11g radio mode. Channels 12-14, used in other countries outside the US will not be available.
    o The AXn supports both the 2.4 and 5 GHz radio bands for 802.11n. The 5 GHz band is restricted in certain countries (like the UK) so operating in this mode may get you unwanted attention.
    That should be okay then because the Netgear broadcasts on channels 1-11. I hadn't appreciated the 5 Ghz band, but having checked both US and UK Apple sites the techspecs both mention 2.4 Ghz and 5 Ghz.
    Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
    If your intent is to have the AXn join the Netgear as a wireless client, then yes it should work. The "$" requirement was for WEP. This shouldn't be necessary for WPA or WPA2.
    I intended to use the AXn as an range extender, but you mention wireless client, is that something different?

  • Two questions about SG300 DHCP server

    Hi,
    I have two questions about the DHCP server on the SG300:
    On the Address Binding page, what does the "Declined" state mean? I have a NAS device that won't pull an address, and I think that the entry with a state of "Declined" corresponds to this device. It was previously pulling an address from a RV180, so the only difference is that it is now connected to the SG300. I worked around this by manually setting the address on the NAS device, but this won't scale if I run into a lot of other devices that can't pull an address.
    I configured a static address binding for a WAP321 and found that instead of pulling the configured address that it pulled a dynamic address. I checked the Address Binding page and see that the dynamic entry that corresponds with the WAP321 has a Client Identifier rather than a MAC address. I changed the static entry for the WAP321 to use the client identifier displayed in the dynamic entry, and now the WAP321 pulls the configured static address. Is this expected behavior?
    Thanks,
    Bob

    With the SX300/500 it is required the client identifier, it doesn't automatically insert it. If static DHCP is made on the switch and you didn't need client identifier, that is more or less fortunate behavior for you
    So to answer this question, the expected behavior is to configure client identifier for static DHCP entry.
    -Tom
    Please mark answered for helpful posts
    http://blogs.cisco.com/smallbusiness/

  • Two questions about the new iWeb

    Hi
    I've got two questions about the new iWeb.
    1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
    2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
    thanks

    Ah well... thanks for the quick answer
    Message was edited by: Guðlogi

  • Two Questions about Adobe CS6

    I've recently begun editing a film project and have two questions about Adobe Premiere Pro CS6 that I was hoping someone could answer.
    1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
    2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
    Thanks

    1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
    Yes.
    It will depend on the degree of lens edge intrusion into the frame,
    but an enlargement of 5-10% or so is not a big problem.
    2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
    Oh, yeah...  lots of options (including many 3rd party plugins).
    Premiere color correction
    FAQ: How do I learn Premiere Pro?
    http://forums.adobe.com/thread/878529?tstart=0
    Getting Started with Premiere Pro CS6
    http://www.video2brain.com/en/getting-started-with-premiere-pro
    Adobe Premiere Pro Help and tutorials
    http://helpx.adobe.com/premiere-pro/topics.html
    Premiere Pro CS5-CS6 Reference
    (.pdf 12 MB download)
    http://helpx.adobe.com/pdf/premiere_pro_reference.pdf

  • Two Questions About SSL

    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

  • Question about 890GXM-GD65 ? any help..? tq

    Dear people..
    I have a question about this board MSI 890GXM-GD65, maybe somebody could help me with the answer...Do the board have an unlock cpu core bios like 785GM-E51 ...? thanx in advance..

    Have a look: http://eu.msi.com/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=2012

  • My first two questions about SSL

    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    That error about "no jsafe" occurs if you have not applied any service
    pack at all ( as you have said ). Get the latest SP ( SP6 ) and it
    should go away.
    John
    Sergio Rios Mendoza wrote:
    >
    When I try to stablish a secure connection (via
    https://localhost:7002/AdminMain) the console gives me this error (please
    see
    below), which is the same when I run . startWebLogic.sh to start it.
    Two questions:
    1.- What is this problem about?
    2.- Even with this error, I can see AdminMain in secure mode. Should I be
    worried about the
    error?
    I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
    any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
    Thanks in advance
    Sergio Rios Mendoza
    Departamento de Sistemas
    Corporativo de Servicios Grupo Comercial Mexicana
    PS: this is the error:
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
    Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
    init
    java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
    at java.lang.Runtime.loadLibrary0(Runtime.java:469)
    at java.lang.System.loadLibrary(System.java:774)
    at
    COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
    ve.java)
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at
    COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
    at weblogic.security.RSA.performOPJSafe(RSA.java:178)
    at weblogic.security.RSA.performOp(RSA.java:104)
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
    at
    weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
    at weblogic.security.SSL.Handshake.input(Handshake.java:109)
    at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
    at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
    at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
    at
    weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
    at
    weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
    at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
    at
    weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
    at
    weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
    6)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

  • Two questions about the Nokia 920 to Nokia experts...

    Hi,
    I am considering the Nokia 920 for replacing my Apple 4. However I have two questions that nobody in a phoneshop can answer. Furthermore I can test it myself as about all Nokia 920 in shops seems to be a dummy for showroom purposes.
    Therefore I would appreciate it if somebody can answer these two questions:
    1. Which versions of MS-Office can be read on the Nokia 920? 
    2. I have heard there are some difficulties with the Nokia 920 to watch Youtube movies. Is this true? If so, what is  the solution of Nokia. If have heard to load a Metro app that solves these Youtube problems.
    I have seen many videos by now about the Nokia 920 but none does cover really these questions. Thanks for taking the time to write me an answer.
    Regards,
    Jan
    Solved!
    Go to Solution.

    Works with Office 2010 at least.
    There is at least the latest MS Youtube app to stream video without problems.

  • Question about Z87-GD65 Gaming 7.1 HD Audio

    Hi, I am interested in the new Z87 GD65 gaming motherboard, it looks cool but I have a question about the 7.1 HD Audio.
    Does it only support through S/PDIF output? or, by using the Sound Blaster Cinema suite, it able to simulate virtual 7.1 surround
    to my Stereo headset, just like other standalone 7.1 virtual sound cards do?
    Sorry for poor English 
    Thanks in advance.

    Quote from: mongkb on 06-June-13, 12:49:25
    Does it only support through S/PDIF output?
    Yes.
    http://www.msi.com/product/mb/Z87-GD65-GAMING.html
    Click on Specifications / Detail.
    Audio
    • Realtek® ALC1150 Codec
    - 7.1-Channel High Definition Audio
    - Supports S/PDIF output

  • Two questions about my "new" used Macbook

    Hello everyone,
    I recently bought a Macbook for my wife from craigslist. It is a early 2008 model (http://www.everymac.com/systems/apple/macbook/stats/macbook-core-2-duo-2.2-white -13-late-2007-santa-rosa-specs.html). I have two questions regarding its use.
    1. I know a video adapter is available for these computers. Is there a cable that can connect the video out on the macbook to a TV that has only a RCA input?
    2. I noticed (a little late) that the mouse button on the trackpad is a little chintzy. It takes quite a bit of effort to press the button and it appears to stick a little. I currently have the trackpad configured to accept clicks, however I would like to fix the button if possible. Has anyone had any success with changing the mouse button?
    Thanks.

    Thanks for the response. I went to the apple store and picked up the cable yesterday. It works perfectly. I cleaned the area around the trackpad button a little and it seems to have eased a little. I will try putting the piece of paper in there and see if it gets better.
    I have a follow up question regarding the video out to a CRT TV. Does anyone know what resolution works best for this kind of low-tech TV? I tried 800X600 and 1024X768 last night and neither one seemed TV-like. Should I try a lower resolution? I am trying to stream hulu from my computer directly into my TV.
    Thanks.

  • Two questions about my new Mac Pro

    Just got my new Mac Pro up and running and have two questions (issues)
    First, I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right? It's no big deal to have to turn it on at the computer itself, just wondering if anybody else is having this happen.
    Also, the audio out at the back of the computer doesn't work. I've tried plugging in my speaker as well as my headset and nothing. If I plug either of those into the headset jack in the front of the computer all is well. Any thoughts?
    Otherwise, I sure do love my Mac Pro!
    Thanks.
    jamie

    I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right?
    ADC has pins for power control and the power light. DVI does not have these signals so the display's power button cannot turn on the computer when used with a DVI to ADC adapter.

  • Two questions about of usage of LDAP  in SAP XI-context

    Hello!
    I would like to know whether an LDAP adapter is existing for SAP XI or not?
    It is important for the answer of the following two questions:
    <b>a) Does the solution have Active Directory integration for accessing employee information?      (Yes/No) 
    b)Does the solution have Active Directory integration for accessing employee hierarchy? (Yes/No)      </b>
    Can someone help me by answering the questions above.
    Thank you!
    Regards

    I do not think that there is a LDAP Adapter for XI.
    However, SAP NW has its own LDAP database. There are tools available integrating this LDAP with an external LDAP databse. For example, program RSLDAPSYNC_USER enables synchronizing the User information with the LDAP server.
    Transaction LDAP allows you to define which specific user information is to be integrated.
    I am not sure if there is an option to integrate employee hierarchy. You can check with the transaction LDAP.
    Note that none of this has anything specific to XI. It is available with the NetWeaver itself.
    Good Luck,
    Bhanu

  • Two questions about Preview

    In earlier OS versions, particularly on the MacWorld website, I was able to find a workaround so that PDFs do not automatically open in Safari - and that they are downloaded and pop-up immediately in Preview. Here are my two questions:
    1. Does anyone know of a new workaround for Lion - so that, when I engage a PDF link, it opens directly in Preview?
    2. Preview is now a far-less impressive software, without a "save as" command as well as a few other changes that make no sense. does anyone know a way to modify Preview to add back these functions?
    Thanks so much for any help. would love to share this on my blog once I get it answered.
    Will

    thanks CT.
    1. Couldn't find that menu item in preferences - I'm probably just dense.
    2. Figured. don't like some of the macro changes they made to the OS - perplexing to say the least. Preview is a dog now.

Maybe you are looking for

  • My old laptop broke beyond repair and I now have a new laptop. How can I import my itunes account to a new computer?

    My old laptop broke beyond repair and I now have a new laptop. How can I import my itunes account to a new compute

  • Problem in accessing HTML data

    Hi Frens, I m getting some html data from my servlet. But From Server it is sending the data in html format. There, It is sending the data in CDATA format. Here I get some problem in displaying the data in Flex. I have following questions: 1. How can

  • Why is my screen disappear and goes white?

    When working on my Mac, some times the screen fades up and goes white. The current window becomes invisible and unclear. Most of the time I have to position my Mac against the wall or against someting hard when I am working. Please any help will be a

  • C2 can't do this - what can?

    Hi, I'm using C2 to create reading texts for adult learners with reading difficulties. I can easily have a slide on the page with a sentence and audio integrated. I can even highlight sentences when necessary. However, I've been asked to highlight ev

  • Opening Folders in the Mac

    Hi, I have a question about navigating the different folders within the Mac. On my windows machine whenever I open a folder, it open the contents of that folder within the same window. On the Mac, When I click on a folder it opens a a whole new windo