Two questions...help

Hi all,
I have two questions about folders in Finder.
In finder when you when you want to move a file or folder, the only option is to copy the folder and paste it in the desired location, but the original file remains in the original place too, so you have to delete it, this is fine; but it becomes anoying when I have 20 files to put in 20 different locations. Is there any option to do this easily and quickly?
The other question is, can you configure your files and folder to open just with 1 click? like in the PC if you click once in the icon, the foler opens.
Thank you,
lbml
P.S. I'm using a iBook G4 with OS X 10.4.8

For the first question, you can adjust the behavior of drag/dropping folders by holding the Option or Cmd keys.
The default behavior when moving a file between locations on the same volume is to move them. If you hold Option after you begin dragging and before you drop, a green plus sign will appear to indicate the file will be copied. If you hold both Option and Cmd, an arrow will appear to indicate that an alias will be created.
When going across volumes, the default is to copy as indicated by the presence of the green plus sign. Holding Cmd will change the action to a move. Holding both Option and Cmd will again switch to alias creation.
For the second question, I don't think so if you are using Icon view. I prefer Column view since it is the easiest way to navigate through folders, though.

Similar Messages

  • TS3297 I'm trying to buy a song and it won't let me it keeps telling me to ask these two questions like what was my first pets name and what was my childhood nickname and I forget I need help please

    I'm trying to buy a song and it won't let me a page keeps popping up telling me to answer these two questions like what was your first pets name and what was your childhood nickname and I forget the answers and it says I will be locked out of my apple id and I don't want that so can u please help me thanks

    If you didn't establish a rescue email address, you will need to call applecare support.  Ask for account security to reset your security questions.  After the advisor is able to verify your identity, they can reset your security questions.
    HTH.
    If you are in the US, the number is 800-275-2273

  • HT201303 Please help me. I have forgotten my security answers on two questions. It is not easy to restore it. Apple support did not send me on my e-mail  the answers or did not make opportunity to have as an option to reset my security questions on line.

    Please help me. I have forgotten my security answers on two questions. It is not easy to restore it. Apple support did not send me on my e-mail  the answers or did not make opportunity to have as an option to reset my security questions on line.

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (97776)

  • How do I reset my security questions? Normally people are saying something about a rescue email or a thing that will show where your password and security are for me it just shows my two questions  and that is it.- Help

    How do I reset my security questions? Normally people are saying something about a rescue email or a thing that will show where your password and security are for me it just shows my two questions  and that is it.… Help

    Go to Appleid.apple.com and choose Manage ID you can change them from there.
    You can add a rescue email if you don't have one there too.

  • TWO QUESTION,PLEASE HELP!!!,THANKS

    I had set up the stream replication environments,
    which are from OLTP A to Warehouse C and from OLTP B to Warehouse C respectively,
    A--->C
    B--->C
    and I build two APPLY PROCESSES TO apply changes origins from two source A and B,
    the operating system is :linux 9 redhat;
    oracle db system is :9.2.0.4 with two patchset appled
    Now two questions puzzle me, would u mind giving me some advises,thanks in advance!
    1) HOW CAN I CONTROL THE SCHEDUAL JOB WITH T+1 MODE
    (that is I want apply all the dml changes ,which occur at source db A and B before 24:00:00,after the 24:00:00 changes at A and B will not apply at the C until the next day)
    2) HOW CAN I Write THE RMAN DELETING ARCHIVE SCRIPTS TO ALWAYS KEEP ARCHIVES THAT the Minimum Archive Log Necessary To Restart Capture (Note:275323.1)
    in the situation 2),sometimes the apply process will fail for some reasons,I want to control RMAN always not to delete the necessary archives that captures needed at restarting period in case of the applys fail.have some tips?

    I don't actually understand your first question since in my time-count 24:00 does noet exist and 0:00 is actually allready the next day. But may be you could let the apply process put the changes on a queue (dbms_apply_adm.set_enqueue_destination(rule_name => ...., destination_queue_name =>...);). Then you could have one or more pl/sql jobs to dequeue the changes based on the enqueue-time and have them apply the changes.
    As far as I've understood RMAN won't/cannot delete archived logs that are still needed by capture process. So I don't see a problem there. But let the other streams guru's correct me if I'm wrong.
    Regards,
    Martien

  • Two questions about defining class, pls help me

    Hi, guys. I'm green hand and here are two questions puzzled me several days.
    We know such example as below is a case of cyclic inheritance
    class Base extends Base{     
    But I can't figure out why below is a case of cyclic inheritance too
    class Base{
    class Derived extends Base{
    class Base{
    I can't find the clue of cyclic inheritance. It's quite different from the case that a class extends itself or its subclass.
    Another question is why the inner class can't have the same name of outer?
    class Base{
    class Base{          
    The compiler says Base is already defined in unnamed package. As it says, the inner class is defined in the
    unnamed package, but we know below is correct.
    class Base{
    class Basic{          
    class Derived {
    class Basic{
    We know it's correct. But as the compiler says above, the different two inner class Basic are both defined in the
    unnamed package. Why it's valid and why above is invalid?

    Hi,
    Can you tell us which product (s) you are referring to ? Can you also tell us the nature of your business requirements so that we can offer some suggestions ?
    Regards,
    Sandeep

  • Two questions please help!!!!!

    Two questions-1.where did the Update All button go in the app store. I have to click on each app to update??? 2. After update all I have is tab browsing in Safari. You used to be able to click on the top bar and open a new page. I really despise tabs!!

    I can still update all app in the App Store app via the Updates tab - I can't remember exactly what it looks like (and I don't currently have any updates so I can't check), but I think that there is an 'update all' button at the top of the screen on the Updates tab .
    In terms of Safari, on iOS 5 it now uses tabbed browsing, the thumbnail/page browsing no longer exists. You can open new tabs via the '+' to the right of the tab bar, and you can close the current tab via the 'x' on the left of the tab (unless you only have one tab open). I think that the iCab Mobile (?) browser might support thumbnail/page browsing. If you want thumbnails back in Safari (or the choice of them) then you can try leaving feedback and maybe in a future release it'll happen : http://www.apple.com/feedback/ipad.html

  • Two questions about Risk Management 2.0

    hi experts,
    Please find below two questions about Risk Management:
    -In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
    include "/ORM/LORM_API_SERVICESU10 " in
    line 97:
    "Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
    "parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
    "bel."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    Do you know where it could come from?
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?
    Thank you !
    Regards,
    Julien

    Hi Julien ,
    I have the same error what u described as :-
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?    "
    Are you able to solve this. Please let me know how to resolve this???
    Thanks
    Regards,
    Atul

  • Two questions on SP1 and Vista booting

    Hi all,
    two questions:
    1) did I understand correctly that if I want SP1 on my machine I have to install it manually, as it is not included in the automatic update routines?
    2) my machine failed yesterday, I got a message "Windows failed to start. A recent hardware of software change might be the cause." The only thing I can think of is that before switching it off the previous time, I had inserted a USB hard-drive to copy some files on it. But I had continued working on the machine normally. The other unusual event is that the day before it was very slow booting up, so afer it finished booting up, I restarted it.
    When the system failed to start, I tried the automatic procedures several times, which always ended up with "windows cannot solve the problem automatcally,
    contact your vendor". In the penultimate attempt, I also clicked on an "advanced option tab" and restored the system, but that also did not solve the problem. Then, this morning I switched the machine on again to write down the exact error message I got, and instead, unexpectedly (and rather gladly), the machine started up normally. So, what might have happened? Should I get my machine (which is less than a month old) checked?
    thanks!
    paola

    Yes, theres a chance to have a complete image from the actual state of your operating system including all programs etc....
    There are several solutions:
    1. The Commercial One: http://en.wikipedia.org/wiki/Ghost_(software)
    2. Another commercial one: http://www.acronis.com/homecomputing/products/trueimage/features-cloning.html
    3. The Free one: http://www.ubcd4win.com/
    (but more complicated and you need in all cases a external data storage, there are some tools on this ToolsCD which are free and do almost the same like acronis or ghostimage)
    I guess there are still thousands of cloning programs but I tried to give you the most important and most reliable tools.
    If I were you, I would check the UBCD4Win, burn it to a CD, buy an external HDD, start the UBCD4WIn and clone your drive to the external one. So you can perform incremental backups of your HDD and if something happens, you must only do the whole process like you perform the backup just reverse.
    Hope I could help you..
    Cheers

  • Two Questions about Airport Express

    All, I am a recent convert to using a Mac so bear with me.
    I have two questions about the Airport Express.
    Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
    Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
    Any help and advice gratefully received.

    Tesserax wrote:
    Hello andixbox. Welcome to the Apple Discussions!
    Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
    Yes, but at least two things to consider:
    o The US version of the 802.11n AirPort Express Base Station (AXn) only supports radio channels 1-11 in the 802.11g radio mode. Channels 12-14, used in other countries outside the US will not be available.
    o The AXn supports both the 2.4 and 5 GHz radio bands for 802.11n. The 5 GHz band is restricted in certain countries (like the UK) so operating in this mode may get you unwanted attention.
    That should be okay then because the Netgear broadcasts on channels 1-11. I hadn't appreciated the 5 Ghz band, but having checked both US and UK Apple sites the techspecs both mention 2.4 Ghz and 5 Ghz.
    Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
    If your intent is to have the AXn join the Netgear as a wireless client, then yes it should work. The "$" requirement was for WEP. This shouldn't be necessary for WPA or WPA2.
    I intended to use the AXn as an range extender, but you mention wireless client, is that something different?

  • Two questions about SG300 DHCP server

    Hi,
    I have two questions about the DHCP server on the SG300:
    On the Address Binding page, what does the "Declined" state mean? I have a NAS device that won't pull an address, and I think that the entry with a state of "Declined" corresponds to this device. It was previously pulling an address from a RV180, so the only difference is that it is now connected to the SG300. I worked around this by manually setting the address on the NAS device, but this won't scale if I run into a lot of other devices that can't pull an address.
    I configured a static address binding for a WAP321 and found that instead of pulling the configured address that it pulled a dynamic address. I checked the Address Binding page and see that the dynamic entry that corresponds with the WAP321 has a Client Identifier rather than a MAC address. I changed the static entry for the WAP321 to use the client identifier displayed in the dynamic entry, and now the WAP321 pulls the configured static address. Is this expected behavior?
    Thanks,
    Bob

    With the SX300/500 it is required the client identifier, it doesn't automatically insert it. If static DHCP is made on the switch and you didn't need client identifier, that is more or less fortunate behavior for you
    So to answer this question, the expected behavior is to configure client identifier for static DHCP entry.
    -Tom
    Please mark answered for helpful posts
    http://blogs.cisco.com/smallbusiness/

  • Two questions: Scanner and exception handlers

    Extreme Newbie Alert: I took a single college semester involving Java, almost five years ago, and haven't really touched it since until recently when I decided to try to get back into it. I am now working on building a program while reading the Java 5.0 Tutorial downloadable from Sun.
    Okay, now that the faint of heart have left us, here are the two questions I want to ask:
    1) I am trying to use the Scanner tool ( http://java.sun.com/j2se/1.5.0/docs/api/java/util/Scanner.html ) on a FileReader wrapped in a BufferedReader. I have installed JDK 5.0 and I am importing java.util.*, but when I try to compile I get this error:
    Wishlist.java:71: cannot resolve symbol
    symbol : class Scanner
    location: class Wishlist
    Scanner readFromMe = new Scanner(new BufferedReader(new FileReader("wishlist.txt")));
    ^
    ...and then another one pointing to the other appearance of "Scanner" in the same line, followed by six more in places where I use the readFromMe variable that line was supposed to declare and initialize. Any idea why the compiler doesn't recognize Scanner even though I'm importing its package?
    2) Is there anything preventing you from nesting exception handlers? As you've seen, in this program I open a file...if that attempt produces a FileNotFoundException, I want the error handling to create a new, empty file to use in place of the one that should have been there. Since this could throw an IOException of its own, I would need to put a try | catch block into the other catch block. Is the compiler going to stand for that? Alternatively, is there any input stream that creates a file with the specified filename if there is none already? Probably not, since a newly created file will be empty and there's no point in having an input stream on it...

    1) Are you sure you installed and are invoking jdk
    1.5? Maybe you have an earlier version ahead of it
    on your path.Hm. I did use 1.3 back in college...I checked the contents of PATH and the User Variables version of it was set correctly but the System Variables version of it was set to 1.3. I corrected the System Variables version of it and now the compiler doesn't complain about Scanner...but I'm still getting errors that it doesn't recognize readFromMe even after I initialized it. Odd...
    2) yeah you can nest try/catch blocks like that.
    However, in this case, exceptions sound like the
    wrong way to go. A missing file sounds like a real,
    regular possibility -- it's not that exceptional as
    you describe it. A better thing would be to create
    a File object, see if the file exists, and then if
    it doesn't go ahead and immediately handle that
    case. Don't even try to open the file that may not
    exist.Okay, I'll try rewriting the file read like that, and hopefully the readFromMe errors will go away. If they don't I'll make a new post...probably with the entirety of the code because I can't even guess at what part of the code is causing that. Thanks for the help!

  • CGI map file questions, help !!!

    I am trying to use the CGI map file to open web reports. I got two questions at this time.
    1. How to refresh the report to reflect resent edits ? I used the CGI map to open a report. Later, I made some edits to the report and opened it again. However, the browser showed the report before the edit. I had to save the report to different file name and edited the key in the map file to show the edited report. This should not be the right way.
    2. How to open a report on a separated screen which is on top of the original one ?
    Any suggestions? Thanks!
    null

    Hi Kate.
    As far as a find and replace tool is concerned, most of us
    here prefer using some tool such as FAR or BkReplacem as they offer
    more features to help in this kind of scenario. The simple answer
    is however that these tools, as indeed does the inbuilt tool, bases
    it's search on the HTML. Therefore if there are specific instances
    of HTML strings you will have to analyse carefully them before you
    replace anything. It sounds like you are already some down down
    this line. Take a backup of your project and test out your theory.
    As far as your map file question is concerned, you can safely
    reimport your map file PROVIDED that no changes have been made to
    the mapids in the meantime. Personally I wouldn't do this unless
    you are 100% sure of this. If it is a case of having 100s of topics
    that are not mapped and never have been but could be, I'd just
    create a new map file and map away.

  • Two Questions I Cannot Solve

    Hi There! I Am Setting Up My Public Skype Account. But Here Are Two Questions I Couldn't Figure Out How To Do. 1) How To Disable Messaging? (ex. you cannot message echo service)2) How Do I Message Everyone, Everything at the Same Time? (including their names ex. if you are jack, you get a message like this "Hey There Jack! I Just Started Using Skype!" and the same message to Helen "Hey There Helen! I Just Started Using Skype! I know that there is a way to, my friends do it. Thank You For Helping!

    1.  The Echo test account is a special account in which messaging is disabled.  You can't in normal chats.  You can only control your privacy IM settings to receive IMs. from either anyone, or contacts only.  Old p2p group chats you can following the guidance in this FAQ: https://support.skype.com/en/faq/FA10042/.    2.  You can only accomplish that by creating a group, adding people and sending a message to the group.  The main reason something like that isn't facilitated without group chats is due to the abuse that would be created by spammers and spam bots.

  • Two questions about of usage of LDAP  in SAP XI-context

    Hello!
    I would like to know whether an LDAP adapter is existing for SAP XI or not?
    It is important for the answer of the following two questions:
    <b>a) Does the solution have Active Directory integration for accessing employee information?      (Yes/No) 
    b)Does the solution have Active Directory integration for accessing employee hierarchy? (Yes/No)      </b>
    Can someone help me by answering the questions above.
    Thank you!
    Regards

    I do not think that there is a LDAP Adapter for XI.
    However, SAP NW has its own LDAP database. There are tools available integrating this LDAP with an external LDAP databse. For example, program RSLDAPSYNC_USER enables synchronizing the User information with the LDAP server.
    Transaction LDAP allows you to define which specific user information is to be integrated.
    I am not sure if there is an option to integrate employee hierarchy. You can check with the transaction LDAP.
    Note that none of this has anything specific to XI. It is available with the NetWeaver itself.
    Good Luck,
    Bhanu

Maybe you are looking for