Two questions of application
1. I find some use of " TransformGroup transformGroup[ ]" in some books,but I only got NullPointerException when I do so in the programme. can it really be done? and i want to know how to set a group of transformGroups without decided quantity.
2. In my work, I use the Jtree too,but I find it don't have the relations of objects as which in java3d,how to use them together well??
thanks.
D.L.
no offense, but i don't think anyone on this planet could make sense of what you just said
Similar Messages
-
Two questions about Risk Management 2.0
hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
JulienHi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul -
More specific to two questions
Hi,
First of all, many thanks to Rottier, Daniel, Geoff. Your ideas are
definitely useful.
Regarding two questions I posted yesterday, I’d like to give you more
background information so that it will make questions more specific.
Now we have a lot of applications (programs) written in either C, C++,
Java codes or Forte (maybe other language like VB). Our purpose is to
integrate all the codes written for the different platforms such as
Windows NT and UNIX together seamlessly through CORBA or CORBA-IIOP
(Internet Inter-Object Request Broker Protocol). The most difficulties
I have met so far are to pass an object by its value. As you know,
CORBA specifications, version 2, don’t support the concept “pass object
by value”. But currently, some of CORBA vendors such as Forte and Iona
(OrbixWeb) do extend the concept “pass by reference” and support the
concept “pass object by value” for Java Mode not for IDL (Interface
Definition Language) Mode. If we want to integrate all codes together
without the support of “pass object by value”, the following question I
need to answer is the garbage collection in the Forte server side. In
CORBA IDL mode, I have to set all IsAnchored attributes of all objects
to TRUE. Can these objects be garbage collected? If yes, how does the
garbage collection work?
Please note that the client (C, C++, Java or other language) and the
server (Forte) are written using different languages (not limited to
Forte)! The question I posted can be much complicated if the client and
server are written in the different languages and for the different
platforms (NT and UNIX) as well as applied to the distributed and
multithreaded environment.
To be exact, if one of the multiple remote C++ clients decides not to
access the objects (not limited to service objects) in the Forte server,
how does Forte garbage collection know what the client has done
automatically and garbage collect the object? It is known that CORBA
does not support garbage collection. Is there any functionality
provided by Forte to let itself be automatically notified? As we know,
COM and DCOM do have such kind of functionality. When you integrate
DCOM with your applications, at both sides (client and server), it is
DCOM who internally poll the object references periodically. How about
CORBA and Forte? Forte has integrated IIOP as its own built-in
component and supported VisiBroker and IONA CORBA products. My guess is
because Forte has IIOP built in itself (both sides have to run ORB), so
Forte has the full control over the whole running environment, and can
monitor the references to the objects, and apply the garbage collection
to the objects automatically. Is this true? Here are the key words:
multiple, remote (distributed), different platforms and languages,
CORBA-IIOP. We should take all of these things into our consideration.
I did find that there is a big difference between IsAnchored set to TRUE
and FALSE when I tried to integrate C++ client, Forte server and Java
client, Forte server. For the C++ client, you have to set IsAnchored
attributes of all kinds of objects to TRUE. Note that In Forte, the
service objects and the ordinary objects are treated differently. The
service objects are created by Compiler or Interpreter. It is
transparent to the users. The ordinary objects are created at run time,
garbage collection can be applied to. For Java client, you can either
set IsAnchored attribute to TRUE or FALSE depending on what you want
(access the services provided by Forte server side by value or
reference). This really answers the question: IsAnchored can control
pass object by value or reference, and really matches what you guys
talked about in your e-mail. My thoughts are that IsAnchored has
nothing to do with the garbage collection, otherwise this will disable
the garbage collection at all! Because I have to set all IsAnchored
attributes to TRUE at Forte server side for my C++ client, if the
garbage collection is really based on the IsAnchored attribute, this
means that the garbage collection is totally disabled for all those
objects with their IsAnchored attributes set to TRUE! Can anyone
confirm that? Don’t forget that this issue is raised in such
complicated environment! What I want to clarify is whether Forte does
provide such a garbage collection mechanism so nice, so smart to
automatically maintain a persistent object reference table or whatever
and deal with the garbage collection issue in such complicated
environment!
Believe this can make my questions much specific and clear. I’d like to
discuss more details about it.
Thank you again for your informative ideas.
Shi-Long, Yin
US West in Denver
Tel: 303-624-1305
e-mail: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi,
First of all, many thanks to Rottier, Daniel, Geoff. Your ideas are
definitely useful.
Regarding two questions I posted yesterday, I’d like to give you more
background information so that it will make questions more specific.
Now we have a lot of applications (programs) written in either C, C++,
Java codes or Forte (maybe other language like VB). Our purpose is to
integrate all the codes written for the different platforms such as
Windows NT and UNIX together seamlessly through CORBA or CORBA-IIOP
(Internet Inter-Object Request Broker Protocol). The most difficulties
I have met so far are to pass an object by its value. As you know,
CORBA specifications, version 2, don’t support the concept “pass object
by value”. But currently, some of CORBA vendors such as Forte and Iona
(OrbixWeb) do extend the concept “pass by reference” and support the
concept “pass object by value” for Java Mode not for IDL (Interface
Definition Language) Mode. If we want to integrate all codes together
without the support of “pass object by value”, the following question I
need to answer is the garbage collection in the Forte server side. In
CORBA IDL mode, I have to set all IsAnchored attributes of all objects
to TRUE. Can these objects be garbage collected? If yes, how does the
garbage collection work?
Please note that the client (C, C++, Java or other language) and the
server (Forte) are written using different languages (not limited to
Forte)! The question I posted can be much complicated if the client and
server are written in the different languages and for the different
platforms (NT and UNIX) as well as applied to the distributed and
multithreaded environment.
To be exact, if one of the multiple remote C++ clients decides not to
access the objects (not limited to service objects) in the Forte server,
how does Forte garbage collection know what the client has done
automatically and garbage collect the object? It is known that CORBA
does not support garbage collection. Is there any functionality
provided by Forte to let itself be automatically notified? As we know,
COM and DCOM do have such kind of functionality. When you integrate
DCOM with your applications, at both sides (client and server), it is
DCOM who internally poll the object references periodically. How about
CORBA and Forte? Forte has integrated IIOP as its own built-in
component and supported VisiBroker and IONA CORBA products. My guess is
because Forte has IIOP built in itself (both sides have to run ORB), so
Forte has the full control over the whole running environment, and can
monitor the references to the objects, and apply the garbage collection
to the objects automatically. Is this true? Here are the key words:
multiple, remote (distributed), different platforms and languages,
CORBA-IIOP. We should take all of these things into our consideration.
I did find that there is a big difference between IsAnchored set to TRUE
and FALSE when I tried to integrate C++ client, Forte server and Java
client, Forte server. For the C++ client, you have to set IsAnchored
attributes of all kinds of objects to TRUE. Note that In Forte, the
service objects and the ordinary objects are treated differently. The
service objects are created by Compiler or Interpreter. It is
transparent to the users. The ordinary objects are created at run time,
garbage collection can be applied to. For Java client, you can either
set IsAnchored attribute to TRUE or FALSE depending on what you want
(access the services provided by Forte server side by value or
reference). This really answers the question: IsAnchored can control
pass object by value or reference, and really matches what you guys
talked about in your e-mail. My thoughts are that IsAnchored has
nothing to do with the garbage collection, otherwise this will disable
the garbage collection at all! Because I have to set all IsAnchored
attributes to TRUE at Forte server side for my C++ client, if the
garbage collection is really based on the IsAnchored attribute, this
means that the garbage collection is totally disabled for all those
objects with their IsAnchored attributes set to TRUE! Can anyone
confirm that? Don’t forget that this issue is raised in such
complicated environment! What I want to clarify is whether Forte does
provide such a garbage collection mechanism so nice, so smart to
automatically maintain a persistent object reference table or whatever
and deal with the garbage collection issue in such complicated
environment!
Believe this can make my questions much specific and clear. I’d like to
discuss more details about it.
Thank you again for your informative ideas.
Shi-Long, Yin
US West in Denver
Tel: 303-624-1305
e-mail: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Two Questions Re: Embedding Flash and Tables Shortcut
.
Two Questions Re: Embedding Flash and Tables Shortcut
1) I work on a Mac and use Dreamweaver 8. Often I like to
embed Flash objects into a page and I do this by using
Dreamweaver's INSERT > MEDIA > FLASH. However, the SWF file
doesn't show up on the published web page and I’ve never had
this issue using previous versions, so I’m not sure what to
do? Here's what Dreamweaver generates when I use their INSERT
feature:
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0','wid th','550','height','180','src','flash/BANNER.HOME','quality','high','pluginspage','http:// www.macromedia.com/go/getflashplayer','movie','flash/BANNER.HOME'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
width="550" height="180">
<param name="movie" value="flash/BANNER.HOME.swf">
<param name="quality" value="high">
<embed src="flash/BANNER.HOME.swf" quality="high"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash" width="550"
height="180"></embed>
It seems a bit weird that the SWF file is not showing
considering Flash & Dreamweaver are the most compatible apps,
no? I’m assuming if Dreamweaver is generating this code it
should work, no?
2) I’m getting an error when trying to use the Tables
short cut COMMAND+ OPTION+T that reads...
"While executing objectTag, the following JavaScript error(s)
occurred:
At line 26 of file “Macintosh
HD:Applications:Macromedia Dreamweaver 8:
Configuration:Objects:Common:Table.htm”:
TypeError: cmdDOM.parentWindo.createTableStr is not a
function"
What’s strange is it was working fine last week and for
the life of me I don’t know what could of happened to make
this shortcut get corrupted?
I’ve reinstalled the app multiple times and still I get
the same error :-(
Any help is greatly appreciated!
Thanks in advance!
.> It seems a bit weird that the SWF file is not showing
considering Flash &
> Dreamweaver are the most compatible apps, no? I?m
assuming if
> Dreamweaver is
> generating this code it should work, no?
It works. Most likely you have not uploaded the Scripts
folder referenced
in the head of the page.
> What?s strange is it was working fine last week and for
the life of me I
> don?t
> know what could of happened to make this shortcut get
corrupted?
Troubleshooting JavaScript errors in Dreamweaver
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Rupda" <[email protected]> wrote in message
news:[email protected]...
> .
>
>
Two Questions Re: Embedding Flash and Tables Shortcut
>
>
>
1) I work on a Mac and use Dreamweaver 8. Often I like to
embed
> Flash
> objects into a page and I do this by using Dreamweaver's
INSERT > MEDIA >
> FLASH. However, the SWF file doesn't show up on the
published web page
> and
> I?ve never had this issue using previous versions, so
I?m not sure what to
> do?
> Here's what Dreamweaver generates when I use their
INSERT feature:
>
>
<script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=7,0,19,0','width','550','height','180','src','flash/BANNER.HOME','qualit
> y','high','pluginspage','
http://www.macromedia.com/go/getflashplayer','movie','f
> lash/BANNER.HOME' ); //end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=7,0,19,0" width="550" height="180">
> <param name="movie" value="flash/BANNER.HOME.swf">
> <param name="quality" value="high">
> <embed src="flash/BANNER.HOME.swf" quality="high"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
> type="application/x-shockwave-flash" width="550"
height="180"></embed>
>
>
> It seems a bit weird that the SWF file is not showing
considering Flash &
> Dreamweaver are the most compatible apps, no? I?m
assuming if
> Dreamweaver is
> generating this code it should work, no?
>
>
>
>
2) I?m getting an error when trying to use the Tables short
cut
> COMMAND+ OPTION+T that reads...
>
>
"While executing objectTag, the following JavaScript error(s)
occurred:
> At line 26 of file ?Macintosh HD:Applications:Macromedia
Dreamweaver 8:
> Configuration:Objects:Common:Table.htm?:
> TypeError: cmdDOM.parentWindo.createTableStr is not a
function"
>
>
> What?s strange is it was working fine last week and for
the life of me I
> don?t
> know what could of happened to make this shortcut get
corrupted?
>
> I?ve reinstalled the app multiple times and still I get
the same error
> :-(
>
>
>
> Any help is greatly appreciated!
>
>
> Thanks in advance!
>
> :-)
>
> .
> -
Questions about application server architecture
Hello guys,
I have few questions about application server architecture�
I have a task to build a server application which will do the following: Clients (special java clients) will connect to it and send some data for further processing on server side. Chunks of data will be relatively small but they will take a lot of time for processing (it is ok that it will be quite slow).
Also server will run some sort of �database� where all clients� working data will be stored. So, in case a client loses its data he/she is always able to download it from the server.
For me it seems, like server will consist of the following components:
1. �Reception�. This part will be responsible for all client-communication procedures.
2. �Data storage�. This part will simply store all clients� data and provide some API interface for clients through �reception� to manage it (add/get/delete and so on).
3. �Processor�. Some sort of dummy-sophisticated module. It will take some input data from �data storage� when it receives order for this and process it. �Processor� will have two states: �busy� which means �processor� processing some data and �available� which means �processor� ready to process new data.
4. �Manager�. This part will always check �data storage� for new data and �processor� for availability. When �processor� and new data are available �manager� will make an order for �processor� to take new data from �data storage� and process it.
So, my question is the following: Which technology and approaches I should use to realize my plan?
I think that I can make �reception� as a Session Bean, but I don�t know yet, what are the best for the rest, for example �manager� and �processor�. I was thinking about writing my own application server (and I can do it), but I would like to learn j2ee technologies, so I think it is a perfect chance for me (I read a lot about j2ee before I wrote this post, but all examples have only �account�-�bill�-�money transfer� I think it is quite far away from reality or I am doing something wrong ;-)!
p.s. I am thinking about using JBoss as an Application Server. I tested it and wrote some tests. They work and run fast enough, so I like it. Moreover it has module architecture.
Please, give me some advises and tips!
Thank you in advance!1. �Reception�. This part will be responsible for all
client-communication procedures.Session bean with remote interface.
2. �Data storage�. This part will simply store all
clients� data and provide some API interface for
clients through �reception� to manage it
(add/get/delete and so on).Session bean that will use entity beans or hibernate to work with persistant data.
3. �Processor�. Some sort of dummy-sophisticated
module.Use a message driven bean. Make Reception to enqueue a message when new data is available for processing. Processor will process the data and store the resut in database using Data Storage session bean.
4. �Manager�. This part will always check �data
storage� for new data and �processor� for
availability. When �processor� and new data are
available �manager� will make an order for
�processor� to take new data from �data storage� and
process it.It's redundand component, because application server will manage messages and processors. -
Two questions about the NavBar.
Hi!
Two questions please:
1.
I'm binding my NavBar control to a simple Array() declared at my class.
When my class gets the event "applicationComplete" it calls a function which adds a few items to that array.
The NavBar updates correctly.
After a while I add more items to that array, but the NavBar doesn't update (no buttons added).
Should I call any function to make it update and add buttons?
2.
I did a test: By looping, I've created 20 items in an array which is bound to the NavBar and it seems like the NavBar adds these 20 items in a row without checking if it's becoming wider than the stage.
Is there any way to tell it "max items to display", and make it have some sort of "right/left" buttons? Let's say like IE or Firefox 's tabbing system.
See, my app is a bit complex and I can't just put static buttons up.
Thank you all!Thanks Michael,
Look, I'm trying to use the NavBar for an application and the NavBar will be used to navigate through windows.
Simply as that (:
Now, you do know the Firefox or Internet Explorer browsers, right?
When you open 20 browsing windows on them, the tab bar (they call it the "tab bar") is filled with buttons but shows only few of them, not all of them because there's no space on the screen.
Yet, this tab bar puts two buttons from the left and the right, so the user can navigate in the tab bar to choose the current window.
How do I do that? -
I'm trying to buy a song and it won't let me a page keeps popping up telling me to answer these two questions like what was your first pets name and what was your childhood nickname and I forget the answers and it says I will be locked out of my apple id and I don't want that so can u please help me thanks
If you didn't establish a rescue email address, you will need to call applecare support. Ask for account security to reset your security questions. After the advisor is able to verify your identity, they can reset your security questions.
HTH.
If you are in the US, the number is 800-275-2273 -
Two questions on SP1 and Vista booting
Hi all,
two questions:
1) did I understand correctly that if I want SP1 on my machine I have to install it manually, as it is not included in the automatic update routines?
2) my machine failed yesterday, I got a message "Windows failed to start. A recent hardware of software change might be the cause." The only thing I can think of is that before switching it off the previous time, I had inserted a USB hard-drive to copy some files on it. But I had continued working on the machine normally. The other unusual event is that the day before it was very slow booting up, so afer it finished booting up, I restarted it.
When the system failed to start, I tried the automatic procedures several times, which always ended up with "windows cannot solve the problem automatcally,
contact your vendor". In the penultimate attempt, I also clicked on an "advanced option tab" and restored the system, but that also did not solve the problem. Then, this morning I switched the machine on again to write down the exact error message I got, and instead, unexpectedly (and rather gladly), the machine started up normally. So, what might have happened? Should I get my machine (which is less than a month old) checked?
thanks!
paolaYes, theres a chance to have a complete image from the actual state of your operating system including all programs etc....
There are several solutions:
1. The Commercial One: http://en.wikipedia.org/wiki/Ghost_(software)
2. Another commercial one: http://www.acronis.com/homecomputing/products/trueimage/features-cloning.html
3. The Free one: http://www.ubcd4win.com/
(but more complicated and you need in all cases a external data storage, there are some tools on this ToolsCD which are free and do almost the same like acronis or ghostimage)
I guess there are still thousands of cloning programs but I tried to give you the most important and most reliable tools.
If I were you, I would check the UBCD4Win, burn it to a CD, buy an external HDD, start the UBCD4WIn and clone your drive to the external one. So you can perform incremental backups of your HDD and if something happens, you must only do the whole process like you perform the backup just reverse.
Hope I could help you..
Cheers -
Two questions about my "new" used Macbook
Hello everyone,
I recently bought a Macbook for my wife from craigslist. It is a early 2008 model (http://www.everymac.com/systems/apple/macbook/stats/macbook-core-2-duo-2.2-white -13-late-2007-santa-rosa-specs.html). I have two questions regarding its use.
1. I know a video adapter is available for these computers. Is there a cable that can connect the video out on the macbook to a TV that has only a RCA input?
2. I noticed (a little late) that the mouse button on the trackpad is a little chintzy. It takes quite a bit of effort to press the button and it appears to stick a little. I currently have the trackpad configured to accept clicks, however I would like to fix the button if possible. Has anyone had any success with changing the mouse button?
Thanks.Thanks for the response. I went to the apple store and picked up the cable yesterday. It works perfectly. I cleaned the area around the trackpad button a little and it seems to have eased a little. I will try putting the piece of paper in there and see if it gets better.
I have a follow up question regarding the video out to a CRT TV. Does anyone know what resolution works best for this kind of low-tech TV? I tried 800X600 and 1024X768 last night and neither one seemed TV-like. Should I try a lower resolution? I am trying to stream hulu from my computer directly into my TV.
Thanks. -
When I try to stablish a secure connection (via
https://localhost:7002/AdminMain) the console gives me this error (please
see
below), which is the same when I run . startWebLogic.sh to start it.
Two questions:
1.- What is this problem about?
2.- Even with this error, I can see AdminMain in secure mode. Should I be
worried about the
error?
I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
Thanks in advance
Sergio Rios Mendoza
Departamento de Sistemas
Corporativo de Servicios Grupo Comercial Mexicana
PS: this is the error:
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
init
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)When I try to stablish a secure connection (via
https://localhost:7002/AdminMain) the console gives me this error (please
see
below), which is the same when I run . startWebLogic.sh to start it.
Two questions:
1.- What is this problem about?
2.- Even with this error, I can see AdminMain in secure mode. Should I be
worried about the
error?
I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
Thanks in advance
Sergio Rios Mendoza
Departamento de Sistemas
Corporativo de Servicios Grupo Comercial Mexicana
PS: this is the error:
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
init
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120) -
Two Questions about Airport Express
All, I am a recent convert to using a Mac so bear with me.
I have two questions about the Airport Express.
Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
Any help and advice gratefully received.Tesserax wrote:
Hello andixbox. Welcome to the Apple Discussions!
Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
Yes, but at least two things to consider:
o The US version of the 802.11n AirPort Express Base Station (AXn) only supports radio channels 1-11 in the 802.11g radio mode. Channels 12-14, used in other countries outside the US will not be available.
o The AXn supports both the 2.4 and 5 GHz radio bands for 802.11n. The 5 GHz band is restricted in certain countries (like the UK) so operating in this mode may get you unwanted attention.
That should be okay then because the Netgear broadcasts on channels 1-11. I hadn't appreciated the 5 Ghz band, but having checked both US and UK Apple sites the techspecs both mention 2.4 Ghz and 5 Ghz.
Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
If your intent is to have the AXn join the Netgear as a wireless client, then yes it should work. The "$" requirement was for WEP. This shouldn't be necessary for WPA or WPA2.
I intended to use the AXn as an range extender, but you mention wireless client, is that something different? -
Two questions about SG300 DHCP server
Hi,
I have two questions about the DHCP server on the SG300:
On the Address Binding page, what does the "Declined" state mean? I have a NAS device that won't pull an address, and I think that the entry with a state of "Declined" corresponds to this device. It was previously pulling an address from a RV180, so the only difference is that it is now connected to the SG300. I worked around this by manually setting the address on the NAS device, but this won't scale if I run into a lot of other devices that can't pull an address.
I configured a static address binding for a WAP321 and found that instead of pulling the configured address that it pulled a dynamic address. I checked the Address Binding page and see that the dynamic entry that corresponds with the WAP321 has a Client Identifier rather than a MAC address. I changed the static entry for the WAP321 to use the client identifier displayed in the dynamic entry, and now the WAP321 pulls the configured static address. Is this expected behavior?
Thanks,
BobWith the SX300/500 it is required the client identifier, it doesn't automatically insert it. If static DHCP is made on the switch and you didn't need client identifier, that is more or less fortunate behavior for you
So to answer this question, the expected behavior is to configure client identifier for static DHCP entry.
-Tom
Please mark answered for helpful posts
http://blogs.cisco.com/smallbusiness/ -
Two questions about the new iWeb
Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanksAh well... thanks for the quick answer
Message was edited by: Guðlogi -
Two questions about my new Mac Pro
Just got my new Mac Pro up and running and have two questions (issues)
First, I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right? It's no big deal to have to turn it on at the computer itself, just wondering if anybody else is having this happen.
Also, the audio out at the back of the computer doesn't work. I've tried plugging in my speaker as well as my headset and nothing. If I plug either of those into the headset jack in the front of the computer all is well. Any thoughts?
Otherwise, I sure do love my Mac Pro!
Thanks.
jamieI had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right?
ADC has pins for power control and the power light. DVI does not have these signals so the display's power button cannot turn on the computer when used with a DVI to ADC adapter. -
Hello, I have two questions on time capsule I can only have it on my external hd files and free up my internal memory to my mac I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers
I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
Again everything is explained in the reference.. you are not reading it.
Maybe you are looking for
-
How do I change the language of ADF framework error messages?
I'm a beginner in ADF and JDeveloper and I tried to run one of the tutorials for ADF (Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces). While clicking through the application I got errors like this one: ADF_FACES-6009
-
I plug in my iphone to my computer and it doesnt do anything- doesnt charge on the computer or connect to itunes. how can i fix this?
-
Alert with EventId 33333 and Source DataAccessLayer
Hello! I have developed an Outbound connector. In occasions that are not still clear to me, this error exits in the Operations Manager log of my RMS (root mgmt server): EventId: 33333 Source: DataAccessLayer Description: Data Access Layer rejected re
-
Shadow Instance Left Behind in SLD After Using SUM
Hello, Is there a standard procedure for removing the SLD information left behind by the creation of shadow ABAP instances when using SUM to update or upgrade systems? Should SUM have some final step for this built in, or should the update instructio
-
Save AI file as Flash file with hyperlinks in attributes
I have created a map for class project. added links for websites to text in map. When I export the map as a flash file. All I get is a picture without my hyperlinks working. Please advise how to save it or what function is required to be set for it t