Two Questions(RMAN & TEMP. TBS)!!

Hi all,
I have Production DB of which i want to take Backup from a remote machine with RMAN.
i connected to Production DB with NOCATALOG option from remote machine
now i want to configure Rman setting..
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'E:\oracle\oradata\RMAN\ORA_BACKUP%T_s%s'
So the backup file will be stored on which Machine on RMAN(remote machine) or Production DB?
Secondly
my Temporary tablespace data file has grown to 2 GB..
but the objects are stored temporary on this file..after a restart the segments are released from the Temporary TBS(from Data files)..so why even after this it still is of 2GB?
Thanx in Advance!!

Hi,
Thanx for reply.
The real RMAN process runs on the target machine, so backups are stored >>there, not on the machine from which you connect. this is the case where i connect with NOCATALOG option.
but what if connected with Catalog option..then Backups of Prod. DB will be stored
on my machine from where i'm connected to Prod DB...?
i think it will store on my pc.(i.e. from where i'm running RMAN utility)
Thanx in Advance!!
Message was edited by:Ora-Lad
Got the Answer
from RMAN Docs.
Nevertheless, maintaining a recovery catalog
is strongly encouraged. If you create a catalog on a separate machine, and if the
production machine fails completely, then you have all the restore and recovery
information you need in the catalog.

Similar Messages

TEMP TBS platzt...

Hallo,
habe ein Problem mit meinem TEMP TBS...
Ich mache ein "CREATE TABLE AS SELECT". Das SELECT geht auf eine VIEW mit ca. 3.000.000 Datensätzen.
Während das SELECT läuft kann man sehen, wie der TEMP TBS voll läuft und irgendwann abschmiert.
Wenn ich das Ganze auf einer Test-DB (8.1) mache, läuft die Kiste und das mit einem TEMP TBS mit nur 2.5GB!!!
Der einzige Unterschied (den ich jetzt so sehe) ist, dass die TBS in der Test-DB DICTIONARY MANAGT sind und auf der anderen DB (9.2) LOCALY MANAGT. Auch kann ich die TBS auf der 9er nicht DICTIONARY MANAGT anlegen. Ist das unter 9.2 nicht mehr möglich?
Mein TEMP ist so angelegt:
CREATE TEMPORARY TABLESPACE temp
TEMPFILE '/home/loc/TIS_Daten/dbs1/plmtst/temp01.dbf' SIZE 1000M,
'/home/loc/TIS_Daten/dbs1/plmtst/temp02.dbf' SIZE 1000M,
'/home/loc/TIS_Daten/dbs1/plmtst/temp03.dbf' SIZE 1000M,
'/home/loc/TIS_Daten/dbs1/plmtst/temp04.dbf' SIZE 1000M
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1M;
Danke!!!

Auch kann ich die TBS auf der 9er nicht DICTIONARY MANAGT anlegen. Ist das unter 9.2 nicht mehr möglich?Hi,
If I well understand you (with remember my german school training), you cannot create a dictionnary managed tablespace whenever your system tablespace is locally managed.
But to have more chance to find a help, as Yogesh said, try to reformulate your question in english.
HTH,
Nicolas.

TWO QUESTION,PLEASE HELP!!!,THANKS

I had set up the stream replication environments,
which are from OLTP A to Warehouse C and from OLTP B to Warehouse C respectively,
A--->C
B--->C
and I build two APPLY PROCESSES TO apply changes origins from two source A and B,
the operating system is :linux 9 redhat;
oracle db system is :9.2.0.4 with two patchset appled
Now two questions puzzle me, would u mind giving me some advises,thanks in advance!
1) HOW CAN I CONTROL THE SCHEDUAL JOB WITH T+1 MODE
(that is I want apply all the dml changes ,which occur at source db A and B before 24:00:00,after the 24:00:00 changes at A and B will not apply at the C until the next day)
2) HOW CAN I Write THE RMAN DELETING ARCHIVE SCRIPTS TO ALWAYS KEEP ARCHIVES THAT the Minimum Archive Log Necessary To Restart Capture (Note:275323.1)
in the situation 2),sometimes the apply process will fail for some reasons,I want to control RMAN always not to delete the necessary archives that captures needed at restarting period in case of the applys fail.have some tips?

I don't actually understand your first question since in my time-count 24:00 does noet exist and 0:00 is actually allready the next day. But may be you could let the apply process put the changes on a queue (dbms_apply_adm.set_enqueue_destination(rule_name => ...., destination_queue_name =>...);). Then you could have one or more pl/sql jobs to dequeue the changes based on the enqueue-time and have them apply the changes.
As far as I've understood RMAN won't/cannot delete archived logs that are still needed by capture process. So I don't see a problem there. But let the other streams guru's correct me if I'm wrong.
Regards,
Martien

TS3297 I'm trying to buy a song and it won't let me it keeps telling me to ask these two questions like what was my first pets name and what was my childhood nickname and I forget I need help please

I'm trying to buy a song and it won't let me a page keeps popping up telling me to answer these two questions like what was your first pets name and what was your childhood nickname and I forget the answers and it says I will be locked out of my apple id and I don't want that so can u please help me thanks

If you didn't establish a rescue email address, you will need to call applecare support. Ask for account security to reset your security questions. After the advisor is able to verify your identity, they can reset your security questions.
HTH.
If you are in the US, the number is 800-275-2273

Two questions about Risk Management 2.0

hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
Julien

Hi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul

Two questions on SP1 and Vista booting

Hi all,
two questions:
1) did I understand correctly that if I want SP1 on my machine I have to install it manually, as it is not included in the automatic update routines?
2) my machine failed yesterday, I got a message "Windows failed to start. A recent hardware of software change might be the cause." The only thing I can think of is that before switching it off the previous time, I had inserted a USB hard-drive to copy some files on it. But I had continued working on the machine normally. The other unusual event is that the day before it was very slow booting up, so afer it finished booting up, I restarted it.
When the system failed to start, I tried the automatic procedures several times, which always ended up with "windows cannot solve the problem automatcally,
contact your vendor". In the penultimate attempt, I also clicked on an "advanced option tab" and restored the system, but that also did not solve the problem. Then, this morning I switched the machine on again to write down the exact error message I got, and instead, unexpectedly (and rather gladly), the machine started up normally. So, what might have happened? Should I get my machine (which is less than a month old) checked?
thanks!
paola

Yes, theres a chance to have a complete image from the actual state of your operating system including all programs etc....
There are several solutions:
1. The Commercial One: http://en.wikipedia.org/wiki/Ghost_(software)
2. Another commercial one: http://www.acronis.com/homecomputing/products/trueimage/features-cloning.html
3. The Free one: http://www.ubcd4win.com/
(but more complicated and you need in all cases a external data storage, there are some tools on this ToolsCD which are free and do almost the same like acronis or ghostimage)
I guess there are still thousands of cloning programs but I tried to give you the most important and most reliable tools.
If I were you, I would check the UBCD4Win, burn it to a CD, buy an external HDD, start the UBCD4WIn and clone your drive to the external one. So you can perform incremental backups of your HDD and if something happens, you must only do the whole process like you perform the backup just reverse.
Hope I could help you..
Cheers

Two questions about my "new" used Macbook

Hello everyone,
I recently bought a Macbook for my wife from craigslist. It is a early 2008 model (http://www.everymac.com/systems/apple/macbook/stats/macbook-core-2-duo-2.2-white -13-late-2007-santa-rosa-specs.html). I have two questions regarding its use.
1. I know a video adapter is available for these computers. Is there a cable that can connect the video out on the macbook to a TV that has only a RCA input?
2. I noticed (a little late) that the mouse button on the trackpad is a little chintzy. It takes quite a bit of effort to press the button and it appears to stick a little. I currently have the trackpad configured to accept clicks, however I would like to fix the button if possible. Has anyone had any success with changing the mouse button?
Thanks.

Thanks for the response. I went to the apple store and picked up the cable yesterday. It works perfectly. I cleaned the area around the trackpad button a little and it seems to have eased a little. I will try putting the piece of paper in there and see if it gets better.
I have a follow up question regarding the video out to a CRT TV. Does anyone know what resolution works best for this kind of low-tech TV? I tried 800X600 and 1024X768 last night and neither one seemed TV-like. Should I try a lower resolution? I am trying to stream hulu from my computer directly into my TV.
Thanks.

Two Questions About SSL

When I try to stablish a secure connection (via
https://localhost:7002/AdminMain) the console gives me this error (please
see
below), which is the same when I run . startWebLogic.sh to start it.
Two questions:
1.- What is this problem about?
2.- Even with this error, I can see AdminMain in secure mode. Should I be
worried about the
error?
I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
Thanks in advance
Sergio Rios Mendoza
Departamento de Sistemas
Corporativo de Servicios Grupo Comercial Mexicana
PS: this is the error:
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
init
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

When I try to stablish a secure connection (via
https://localhost:7002/AdminMain) the console gives me this error (please
see
below), which is the same when I run . startWebLogic.sh to start it.
Two questions:
1.- What is this problem about?
2.- Even with this error, I can see AdminMain in secure mode. Should I be
worried about the
error?
I'm using Weblogic Server Manager 5.1.0 04/03/2000 17:13:23 #66825 (without
any service pack) on a Red Hat Linux 6.2 Machine & jdk 1.2.2
Thanks in advance
Sergio Rios Mendoza
Departamento de Sistemas
Corporativo de Servicios Grupo Comercial Mexicana
PS: this is the error:
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Tue Nov 14 15:31:51 CST 2000:<I> <ServletContext-General> AdminMain: init
Tue Nov 14 15:31:54 CST 2000:<I> <ServletContext-General> servletimages:
init
java.lang.UnsatisfiedLinkError: no jsafe in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1287)
at java.lang.Runtime.loadLibrary0(Runtime.java:469)
at java.lang.System.loadLibrary(System.java:774)
at
COM.rsa.jsafe.JSAFE_DeviceBuilderNative.buildObjects(JSAFE_DeviceBuilderNati
ve.java)
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at
COM.rsa.jsafe.JSAFE_AsymmetricCipher.getInstance(JSAFE_AsymmetricCipher.java
at weblogic.security.RSA.performOPJSafe(RSA.java:178)
at weblogic.security.RSA.performOp(RSA.java:104)
at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:153)
at
weblogic.security.SSL.ClientKeyExchange.input(ClientKeyExchange.java:132)
at weblogic.security.SSL.Handshake.input(Handshake.java:109)
at weblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:928)
at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:655)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:546)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at
weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at
weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at
weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:50
6)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Two Questions about Airport Express

All, I am a recent convert to using a Mac so bear with me.
I have two questions about the Airport Express.
Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
Any help and advice gratefully received.

Tesserax wrote:
Hello andixbox. Welcome to the Apple Discussions!
Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
Yes, but at least two things to consider:
o The US version of the 802.11n AirPort Express Base Station (AXn) only supports radio channels 1-11 in the 802.11g radio mode. Channels 12-14, used in other countries outside the US will not be available.
o The AXn supports both the 2.4 and 5 GHz radio bands for 802.11n. The 5 GHz band is restricted in certain countries (like the UK) so operating in this mode may get you unwanted attention.
That should be okay then because the Netgear broadcasts on channels 1-11. I hadn't appreciated the 5 Ghz band, but having checked both US and UK Apple sites the techspecs both mention 2.4 Ghz and 5 Ghz.
Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
If your intent is to have the AXn join the Netgear as a wireless client, then yes it should work. The "$" requirement was for WEP. This shouldn't be necessary for WPA or WPA2.
I intended to use the AXn as an range extender, but you mention wireless client, is that something different?

Two questions about SG300 DHCP server

Hi,
I have two questions about the DHCP server on the SG300:
On the Address Binding page, what does the "Declined" state mean? I have a NAS device that won't pull an address, and I think that the entry with a state of "Declined" corresponds to this device. It was previously pulling an address from a RV180, so the only difference is that it is now connected to the SG300. I worked around this by manually setting the address on the NAS device, but this won't scale if I run into a lot of other devices that can't pull an address.
I configured a static address binding for a WAP321 and found that instead of pulling the configured address that it pulled a dynamic address. I checked the Address Binding page and see that the dynamic entry that corresponds with the WAP321 has a Client Identifier rather than a MAC address. I changed the static entry for the WAP321 to use the client identifier displayed in the dynamic entry, and now the WAP321 pulls the configured static address. Is this expected behavior?
Thanks,
Bob

With the SX300/500 it is required the client identifier, it doesn't automatically insert it. If static DHCP is made on the switch and you didn't need client identifier, that is more or less fortunate behavior for you
So to answer this question, the expected behavior is to configure client identifier for static DHCP entry.
-Tom
Please mark answered for helpful posts
http://blogs.cisco.com/smallbusiness/

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Two questions about my new Mac Pro

Just got my new Mac Pro up and running and have two questions (issues)
First, I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right? It's no big deal to have to turn it on at the computer itself, just wondering if anybody else is having this happen.
Also, the audio out at the back of the computer doesn't work. I've tried plugging in my speaker as well as my headset and nothing. If I plug either of those into the headset jack in the front of the computer all is well. Any thoughts?
Otherwise, I sure do love my Mac Pro!
Thanks.
jamie

I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right?
ADC has pins for power control and the power light. DVI does not have these signals so the display's power button cannot turn on the computer when used with a DVI to ADC adapter.

Hello, I have two questions on time capsule I can only have it on my external hd files and free up my internal memory to my mac I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

Hello, I have two questions on time capsule I can only have it on my external hd files and free up my internal memory to my mac I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
Again everything is explained in the reference.. you are not reading it.

Two questions: Scanner and exception handlers

Extreme Newbie Alert: I took a single college semester involving Java, almost five years ago, and haven't really touched it since until recently when I decided to try to get back into it. I am now working on building a program while reading the Java 5.0 Tutorial downloadable from Sun.
Okay, now that the faint of heart have left us, here are the two questions I want to ask:
1) I am trying to use the Scanner tool ( http://java.sun.com/j2se/1.5.0/docs/api/java/util/Scanner.html ) on a FileReader wrapped in a BufferedReader. I have installed JDK 5.0 and I am importing java.util.*, but when I try to compile I get this error:
Wishlist.java:71: cannot resolve symbol
symbol : class Scanner
location: class Wishlist
Scanner readFromMe = new Scanner(new BufferedReader(new FileReader("wishlist.txt")));
^
...and then another one pointing to the other appearance of "Scanner" in the same line, followed by six more in places where I use the readFromMe variable that line was supposed to declare and initialize. Any idea why the compiler doesn't recognize Scanner even though I'm importing its package?
2) Is there anything preventing you from nesting exception handlers? As you've seen, in this program I open a file...if that attempt produces a FileNotFoundException, I want the error handling to create a new, empty file to use in place of the one that should have been there. Since this could throw an IOException of its own, I would need to put a try | catch block into the other catch block. Is the compiler going to stand for that? Alternatively, is there any input stream that creates a file with the specified filename if there is none already? Probably not, since a newly created file will be empty and there's no point in having an input stream on it...

1) Are you sure you installed and are invoking jdk
1.5? Maybe you have an earlier version ahead of it
on your path.Hm. I did use 1.3 back in college...I checked the contents of PATH and the User Variables version of it was set correctly but the System Variables version of it was set to 1.3. I corrected the System Variables version of it and now the compiler doesn't complain about Scanner...but I'm still getting errors that it doesn't recognize readFromMe even after I initialized it. Odd...
2) yeah you can nest try/catch blocks like that.
However, in this case, exceptions sound like the
wrong way to go. A missing file sounds like a real,
regular possibility -- it's not that exceptional as
you describe it. A better thing would be to create
a File object, see if the file exists, and then if
it doesn't go ahead and immediately handle that
case. Don't even try to open the file that may not
exist.Okay, I'll try rewriting the file read like that, and hopefully the readFromMe errors will go away. If they don't I'll make a new post...probably with the entirety of the code because I can't even guess at what part of the code is causing that. Thanks for the help!

More specific to two questions

Hi,
First of all, many thanks to Rottier, Daniel, Geoff. Your ideas are
definitely useful.
Regarding two questions I posted yesterday, I’d like to give you more
background information so that it will make questions more specific.
Now we have a lot of applications (programs) written in either C, C++,
Java codes or Forte (maybe other language like VB). Our purpose is to
integrate all the codes written for the different platforms such as
Windows NT and UNIX together seamlessly through CORBA or CORBA-IIOP
(Internet Inter-Object Request Broker Protocol). The most difficulties
I have met so far are to pass an object by its value. As you know,
CORBA specifications, version 2, don’t support the concept “pass object
by value”. But currently, some of CORBA vendors such as Forte and Iona
(OrbixWeb) do extend the concept “pass by reference” and support the
concept “pass object by value” for Java Mode not for IDL (Interface
Definition Language) Mode. If we want to integrate all codes together
without the support of “pass object by value”, the following question I
need to answer is the garbage collection in the Forte server side. In
CORBA IDL mode, I have to set all IsAnchored attributes of all objects
to TRUE. Can these objects be garbage collected? If yes, how does the
garbage collection work?
Please note that the client (C, C++, Java or other language) and the
server (Forte) are written using different languages (not limited to
Forte)! The question I posted can be much complicated if the client and
server are written in the different languages and for the different
platforms (NT and UNIX) as well as applied to the distributed and
multithreaded environment.
To be exact, if one of the multiple remote C++ clients decides not to
access the objects (not limited to service objects) in the Forte server,
how does Forte garbage collection know what the client has done
automatically and garbage collect the object? It is known that CORBA
does not support garbage collection. Is there any functionality
provided by Forte to let itself be automatically notified? As we know,
COM and DCOM do have such kind of functionality. When you integrate
DCOM with your applications, at both sides (client and server), it is
DCOM who internally poll the object references periodically. How about
CORBA and Forte? Forte has integrated IIOP as its own built-in
component and supported VisiBroker and IONA CORBA products. My guess is
because Forte has IIOP built in itself (both sides have to run ORB), so
Forte has the full control over the whole running environment, and can
monitor the references to the objects, and apply the garbage collection
to the objects automatically. Is this true? Here are the key words:
multiple, remote (distributed), different platforms and languages,
CORBA-IIOP. We should take all of these things into our consideration.
I did find that there is a big difference between IsAnchored set to TRUE
and FALSE when I tried to integrate C++ client, Forte server and Java
client, Forte server. For the C++ client, you have to set IsAnchored
attributes of all kinds of objects to TRUE. Note that In Forte, the
service objects and the ordinary objects are treated differently. The
service objects are created by Compiler or Interpreter. It is
transparent to the users. The ordinary objects are created at run time,
garbage collection can be applied to. For Java client, you can either
set IsAnchored attribute to TRUE or FALSE depending on what you want
(access the services provided by Forte server side by value or
reference). This really answers the question: IsAnchored can control
pass object by value or reference, and really matches what you guys
talked about in your e-mail. My thoughts are that IsAnchored has
nothing to do with the garbage collection, otherwise this will disable
the garbage collection at all! Because I have to set all IsAnchored
attributes to TRUE at Forte server side for my C++ client, if the
garbage collection is really based on the IsAnchored attribute, this
means that the garbage collection is totally disabled for all those
objects with their IsAnchored attributes set to TRUE! Can anyone
confirm that? Don’t forget that this issue is raised in such
complicated environment! What I want to clarify is whether Forte does
provide such a garbage collection mechanism so nice, so smart to
automatically maintain a persistent object reference table or whatever
and deal with the garbage collection issue in such complicated
environment!
Believe this can make my questions much specific and clear. I’d like to
discuss more details about it.
Thank you again for your informative ideas.
Shi-Long, Yin
US West in Denver
Tel: 303-624-1305
e-mail: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi,
First of all, many thanks to Rottier, Daniel, Geoff. Your ideas are
definitely useful.
Regarding two questions I posted yesterday, I’d like to give you more
background information so that it will make questions more specific.
Now we have a lot of applications (programs) written in either C, C++,
Java codes or Forte (maybe other language like VB). Our purpose is to
integrate all the codes written for the different platforms such as
Windows NT and UNIX together seamlessly through CORBA or CORBA-IIOP
(Internet Inter-Object Request Broker Protocol). The most difficulties
I have met so far are to pass an object by its value. As you know,
CORBA specifications, version 2, don’t support the concept “pass object
by value”. But currently, some of CORBA vendors such as Forte and Iona
(OrbixWeb) do extend the concept “pass by reference” and support the
concept “pass object by value” for Java Mode not for IDL (Interface
Definition Language) Mode. If we want to integrate all codes together
without the support of “pass object by value”, the following question I
need to answer is the garbage collection in the Forte server side. In
CORBA IDL mode, I have to set all IsAnchored attributes of all objects
to TRUE. Can these objects be garbage collected? If yes, how does the
garbage collection work?
Please note that the client (C, C++, Java or other language) and the
server (Forte) are written using different languages (not limited to
Forte)! The question I posted can be much complicated if the client and
server are written in the different languages and for the different
platforms (NT and UNIX) as well as applied to the distributed and
multithreaded environment.
To be exact, if one of the multiple remote C++ clients decides not to
access the objects (not limited to service objects) in the Forte server,
how does Forte garbage collection know what the client has done
automatically and garbage collect the object? It is known that CORBA
does not support garbage collection. Is there any functionality
provided by Forte to let itself be automatically notified? As we know,
COM and DCOM do have such kind of functionality. When you integrate
DCOM with your applications, at both sides (client and server), it is
DCOM who internally poll the object references periodically. How about
CORBA and Forte? Forte has integrated IIOP as its own built-in
component and supported VisiBroker and IONA CORBA products. My guess is
because Forte has IIOP built in itself (both sides have to run ORB), so
Forte has the full control over the whole running environment, and can
monitor the references to the objects, and apply the garbage collection
to the objects automatically. Is this true? Here are the key words:
multiple, remote (distributed), different platforms and languages,
CORBA-IIOP. We should take all of these things into our consideration.
I did find that there is a big difference between IsAnchored set to TRUE
and FALSE when I tried to integrate C++ client, Forte server and Java
client, Forte server. For the C++ client, you have to set IsAnchored
attributes of all kinds of objects to TRUE. Note that In Forte, the
service objects and the ordinary objects are treated differently. The
service objects are created by Compiler or Interpreter. It is
transparent to the users. The ordinary objects are created at run time,
garbage collection can be applied to. For Java client, you can either
set IsAnchored attribute to TRUE or FALSE depending on what you want
(access the services provided by Forte server side by value or
reference). This really answers the question: IsAnchored can control
pass object by value or reference, and really matches what you guys
talked about in your e-mail. My thoughts are that IsAnchored has
nothing to do with the garbage collection, otherwise this will disable
the garbage collection at all! Because I have to set all IsAnchored
attributes to TRUE at Forte server side for my C++ client, if the
garbage collection is really based on the IsAnchored attribute, this
means that the garbage collection is totally disabled for all those
objects with their IsAnchored attributes set to TRUE! Can anyone
confirm that? Don’t forget that this issue is raised in such
complicated environment! What I want to clarify is whether Forte does
provide such a garbage collection mechanism so nice, so smart to
automatically maintain a persistent object reference table or whatever
and deal with the garbage collection issue in such complicated
environment!
Believe this can make my questions much specific and clear. I’d like to
discuss more details about it.
Thank you again for your informative ideas.
Shi-Long, Yin
US West in Denver
Tel: 303-624-1305
e-mail: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Two Questions(RMAN & TEMP. TBS)!!

Similar Messages

Maybe you are looking for