Two R/3 Systems on one Windows NT Server
Hello SAP Guru ,
I have ECC6 on database DB2 for Development server and quality server as different client . Now i want to install quality server on same H/W . i go through sdn forum and market place but not found sufficient information for DB2 database , i go through
Note 28392 - Two R/3 Systems on one Windows NT Server also.
Please suggest some more information to keep in mind while doing this activity.
Thanks
Om....
Hi juan,
"When you run two systems in the same box you need to be aware that any mayor mantainance done in one system will have a detriment effect on the other one, specially if you're sharing the Database. During the installation you may find necesary to have some downtime in the system that is currently running as OS or DB restarts are potentially necesary."
I am agree with your post. but still my question is not answered . i am looking for information about what are the things need to modify in current system (either on OS , DB or SAP side) before start of new instance installation for Quality server.
let me explain bit more.
If current system having database name Dev now if i install new instance of SAP on same H/W with name QLT for SID as well as Database name. what are the things i need to change prior installation start so that not any conflict will happen (on OS , DB & SAP)
Or nothing is require to change i can just start installation as on fresh system.
Regards
OM.......
Similar Messages
-
Two R3 Systems on one Windows NT Server
Dear SDN Colleagues,
I'm starting an installation project (DEMO systems) of the Solman 4.0 and SAP ERP 2005 (ECC 6.0). I'm planning to install both systems on one Windows NT Server. About ABAP stack I know that it is possible, as such as describe in the SAP Note 28392 "Two R/3 Systems on one Windows NT Server", but wed like to know about JAVA Stack.
Is there any available SAP documentation about
installing several systems in one host?
Thanks in advanced and Best Regards,
ChaconHi,
you can install both Solman and ECC 6.0 on single NT host.
it is better to go for 64 bit windows installation. if you have 64 bit windows OS.
installation of java stack depands on your requirement.
download installation document from service.sap.com/instguides.
Guidelines: ( for example only)
1) first install SOLMAN 4.0 ABAP + JAVA stack on windows.
SID: SSM
instance number : 00
after sucessfull installation of solman perform post installation on that. and stop the SAP instance.
2) Now install ECC 6.0 ABAP instance , If you want to plan to use ESS/MSS like java based service than JAVA stack is required.
Either you can perform ABAP + JAVA stack or perform only ABAP installation and JAVA stack as separate instance.
SID: ECC
instance number : 10
if you going for JAVA stack as separate instance.
SID: J2E
instance number : 20
so as result you have total 3 System, for this more than 4GB RAM is required. ( for better perfomance)
regards,
kaushal -
'Howto' merge (consolidate) two different BW-Systems in one?
Hi,
actual we have two different BW System (BW-FI/CO and BW-CRM - both Version 3.5) which are installed on an own systems (historic grown).
Now we want reduce our administration and hardware costs and our intention is to merge (consolidate) our two BW-Systems in one - using standard SAP transport method.
Does anyone have any experience with merge of two and more BW Systems in one?
Does anyone have a 'Howto Paper' about this topic?
Thanks in advance,
IsmetHi Arun,
thx a lot for your quick answer. My question was more 'merge/consolidate' of two BW-Systems as a 'System Copy'. I am trying to give you more information about our procedure:
- we have two different BW-Systems - BW-System A and BW-System B
- both BW-System have same Version and Support Package
- we want to overtake ALL BW-Objects (InfoProvider, InfoObjects, Variables, etc......) from System B into System A
- for this procedure we want use STMS (SAP Standard)
- in second step we plan to transfer physical data from System B in to System A with Data Mart procedure (generate Export-Datsource in System B)
Do you have (or anybody) any experience about this procedure?
Thanks a lot and Best Regards.
Ismet -
Two separate speaker systems on one card (audigy 2
Is it at all possible to have two separate speaker systems (maybe even with different volume levels on windows) on the same card? I thought the card did that but it is not working for me.
basketcase590,
You can connect a separate set of analog stereo speakers to rear Lineout and Lineout2. Then in the EAX console, set CMSS3D to stereo surround. This will duplicate stereo output on both rear lineouts. You can affect the front-rear volume by adjusting the stereo focus. -
Two SAP production systems in a single physical server
Dear All,
Is SAP support installing two SAP production systems like SAP ECC 6.0 of one customer and ECC 6.0 with a different SID and instance no. for another customer in a single physical server? Would like to know from the experts is this possible? If yes , what are the things to take care of this design if any?
Thanks
HanyHi ,
check below blog
You can check the following blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5124. [original link is broken]
It helps you to understand different logon pages for portal
Koti Reddy -
Two solamn sap systems in One host ????
Experts,
Is it possible to install two solman 7.0 sap systems in single host.
Aleady i have installed solman 7.0/Ms sql 2005 in the Windows Host. I want to install another solman 7.0 in different SID in same the host for testing purpose.
(I installed ECC and CRM servers in the same host its works fine.)
PLease give your suggesstion
Thanks
ThirumalHi thirumal,
we can install two solman in one system through a concept called MCOD ie multiple components in one Database.
just as we can different SID's in one database.
for more information refer this site:
http://www.doag.org/pub/docs/sig/sap/2002/04/GeorgLeffers_SAP.ppt#550,29
Regards
Manjula.
u manjula on Aug 22, 2008 3:12 PM -
Is it possible to run two Mac operating systems at one time?
I am running snow leopard on my MacBook but have an older version of Photoshop that can only be run on tiger. Tiger is already installed on an external hard drive so I could just boot up into that bit would like to save some time. Is there software that allows simultaneous running of mac OS like parallels desktop does for windows on Mac?
It would seem reasonable that you might be able to do it.. use Disk Utility to create a new partition for the other MacOS and install it to that partition. You will treat each partition as a separate disk, and select the boot disk thru System Preferences. But this approach treats them as separate OS installations requiring separate boots and cannot be run simultaneously.
I opened Parallels 6 on my machine and noticed Parallels will allow you to create a Virtual Machine with another OS and not just Windows. I think you'll have to install MacOS from scratch though using the install MacOS DVD. I haven't tried this approach but it seems like it might be succesful. Not sure what happens when Parallels "translates" between MacOSs though.
I don't think you can use Carbon Copy Cloner to install a MacOS to a Parallels Virtual Machine though. -
Issue with two SID installation in a Single Windows 2003 Server.
Hi,
When I install second installation in a same single machine where already One SID installed, first one is goes down.
But Database is working fine.....
Disp+Work.exe status first it goes to Yellow then goes down..
Kernal of First installation is already updated.
Disp+Work.exe ---> Develeoper_Trc detail is following..
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid TRN
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 6360
Thu Oct 30 16:22:26 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6360) [dpxxdisp.c 1254]
shared lib "dw_xml.dll" version 159 successfully loaded
shared lib "dw_xtc.dll" version 159 successfully loaded
shared lib "dw_stl.dll" version 159 successfully loaded
shared lib "dw_gui.dll" version 159 successfully loaded
shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Oct 30 16:22:31 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ides_TRN_01 <
DpShMCreate: sizeof(wp_adm) 21008 (1616)
DpShMCreate: sizeof(tm_adm) 5912624 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EF60050, size: 6604928)
DpShMCreate: allocated sys_adm at 000000000EF60050
DpShMCreate: allocated wp_adm at 000000000EF62150
DpShMCreate: allocated tm_adm_list at 000000000EF67360
DpShMCreate: allocated tm_adm at 000000000EF673C0
DpShMCreate: allocated wp_ca_adm at 000000000F50ABF0
DpShMCreate: allocated appc_ca_adm at 000000000F5109B0
DpShMCreate: allocated comm_adm at 000000000F5128F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F599580
DpShMCreate: allocated gw_adm at 000000000F599600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F599630
DpShMCreate: allocated wall_adm at 000000000F599640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 6764
argv[0] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=TRN
argv[7] = -DSAPMYNAME=ides_TRN_01
argv[8] = -DSAPPROFILE=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( ides) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >ides_TRN_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Oct 30 16:22:36 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 292
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4516) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6764)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Oct 30 16:23:11 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Oct 30 10:53:21 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6800 Ended no 1 0 0
1 DIA 6796 Ended no 1 0 0
2 DIA 6760 Ended no 1 0 0
3 DIA 6772 Ended no 1 0 0
4 DIA 6896 Ended no 1 0 0
5 DIA 6848 Ended no 1 0 0
6 UPD 6860 Ended no 1 0 0
7 ENQ 6784 Ended no 1 0 0
8 BTC 6864 Ended no 1 0 0
9 BTC 6892 Ended no 1 0 0
10 BTC 6924 Ended no 1 0 0
11 SPO 6928 Ended no 1 0 0
12 UP2 6908 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 30 10:53:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu Oct 30 10:53:21 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T13, U14, , gokul_ggn, 16:22:40, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Thu Oct 30 10:53:21 2008
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ides_TRN_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (6752) (SOFT_KILL)
Stop icman
killing process (6700) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 292 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 292 (pos=2)
SiSelNRemove: removed sock 292
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 292
NiBufIClose: clear extension for hdl 5
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1225364011/669000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:6752 HANDLE:404)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:27 2008
NiISelect: TIMEOUT occured (1000ms)
Thu Oct 30 16:23:28 2008
[DpProcDied] Process died (PID:6752 HANDLE:404)
wait for end of icman
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:6700 HANDLE:412)
[DpProcDied] Process died (PID:6764 HANDLE:388)
DpStartStopMsg: send stop message (myname is >ides_TRN_01 <)
NiIMyHostName: hostname = 'ides'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Oct 30 16:23:39 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12283]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 332 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 332 (pos=3)
SiSelNRemove: removed sock 332
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 332
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 6360) [dpxxdisp.c 10484]
Good Bye .....
Please help out.
Thanks in Advance.
Regards,
Gokul CahndolaYes Finally I Got the solution.
please check
>r3trans -d To Check Conectivity between Apps and DB Server.
If 000 then its OK- mean connectivity is OK, in this case all work.
when I was installing Second system then tnsname.ora and listner file was creating and privios system entry was removed. DUE to that reasion First one goes down.
Solution:- Both system entry should be Listner and tnsname file. Then Both server will work.
**********THANKS TO "AC"**************
Regards,
Gokul Chandola -
Memory system cache on windows server 2003 standard 64-bit is too hign
Hi,
I have an issue with one of the server - OS is windows 2003 standard 64 bit. Total memory installed on the server is 16GB. When I go to task manager>performance tab, Total physical memory is 16 GB, available memory is around 500 MB almost all the time,
System cache is greater than 13.5GB. When I take a look at all the processes that are running, and if I sum those memory usage it will be around 2 GB. So all the memory is consumed by system cache. Checked the perfmon > memory> system cache resident
bytes and it is showing greater than 13.5 GB. I have gone through some articles that tells me to use RAMMAP to find which is using more system cache. But RAMMAP is not designed to run with windows 2003 version. Please can you help with a way/tool to find what
is using system cache in windows 2003 server
Thanks in advance
Regards
RJIt is supposed to do this. Windows can be very aggressive in caching data and code. This data is released as soon as the system needs memory for something else, but when it is unused, the system uses it to cache all sorts of stuff. It utilizes the memory
which would otherwise be unused. Leaving it unused would basically be a waste.
So in other words, nothing is wrong. It is windows which decides to try and be more efficient. As soon as a request for more memory comes in, it just drops whatever is needed from the cache immediately.
This is one of the reasons that in later versions, the memory is reported differently in task manager, because people kept trying to stop the system from caching because they wanted to see more 'free' memory. -
Tracking oracle database activities in security/system logs of windows server
Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
dhomyaHi Dhomya,
I am not familiar with Oracle database, though you may try to enable file system auditing:
Audit object access
https://technet.microsoft.com/en-us/library/cc776774(v=ws.10).aspx
Apply or modify auditing policy settings for an object using Group Policy
https://technet.microsoft.com/en-us/library/cc757864(v=ws.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
How can I link two separate Messenger systems?
From what I have read, the only way to message users from other Messenger systems is to use the Pidgin client which would require a second logon to the other Messenger system.
Can Messenger systems from two separate Groupwise systems be linked at the server level?
- GordonHi,
Here's the link to all the documentation: https://www.novell.com/documentation...l_messenger22/
The installation guide (page 16, I think) explains the authentication requirements.
Cheers, -
Content Server Migration to Windows 2088 Server
Hi,
All our systems are on windows 2008 server. Since during time of Implementation CS was not supported on Wind 2K8 we had to install it on a separate hardware (Win 2K3). Now that it is supported we need to migrate our server from this separate hardware to our SolMan server.
I need some advice on how too go ahead with this activity.
I believe below are the steps.
1. Upgrade MaxDB in our current CS from Version 7.6.03.10 to 7.6.5.12 or above as per SAP Note 1399009.
2. Install SAP CS on the SolMan Sever.
3. Do a Homogenous System Copy - restore of Backup of source MaxDB. Note 962019 & 129352
4. Copy the ContentServer.INI file and the security directory to the
new server. As this is not backed up in the DB Backup.
Is this Process correct? Is there any guides for this. Please help.Hi,
I have not done a migration yet, but I´m introducing ArchiveLink in a larger scal right now and migration is also a topiv for later tasks. What I have found is OSS note 1043676. Here you can copy docs from one repository to another. Thats how I would try:
1. Make a new rep poiting at your new CS (e.g. Z2)
2. Copy all docs from Z1 (your old CS) to Z2 by using OSS note 1043676
3. Change customizing that all your relations point to the new rep.
Cause I guess the final repository is not transparent to the application therefore a switch to a new rep should be possible.
I did not try this but this may be the way I would suppose to go.
Hope I could help you anyway
P.S.: If you found the right way, please post it
kind regards Matthew
Edited by: matthew c. on May 25, 2010 11:15 AM -
Can I configure two webserver domain in one windows server
Can I configure two webserver domain in one windows server with default port. ( i.e 80 )
For Ex:- http://server-name/psp/DOMAIN/?cmd=login and another one
http://server-name/psp/DOMAIN2/?cmd=login.
If not please let me know the workaround to do so. B'coz i don't want to put portnumber in my second URL..Hi,
You can even have serveral domains within the same webserver instance.
During PIA installation (of the second) choose option existing domain and then add an additional site.
Give the domain a unique name and port to your second application server and you are ready to go.
I usually do this on sandbox environments to keep the sandbox small , with several databases (Portal, HCM, FIN, CRM) and one PIA with serveral domain.
But is definitely not what you should do for production systems.
Each application should have it's one PIA instance.
Hakan
I didn't read the port number requirement.
You can only run one webserver instance on a port number for example port 80.
But you can still have one webserver PIA with serveral domain on the same port number as described above.
Edited by: Hakan Biroglu on Mar 14, 2012 2:28 PM -
Hi,
we are currently running our QA and DEV systems one one host and one sql server 2000.the systems version is 4.6c.we are going to upgrade our systems to ecc6.I would like to know if this configuration (two systems on one host and one DB - <u>not mcod!!!!</u>) is supported on ecc6 and on sql server 2005.in notes 28392,171929 it is mentioned only regarding windows 2000 and sql server and sql server 2000.
Regards,
MosheAh - Ok - I got it:)
This configuration is supported since SQL Server 7.0 and I don't find any note or information telling, that it's no more support on 2005, so I would say YES, it is supported.
However, to get a definite answer I'd open an OSS call under BC-DB-MSS and ask the guys from SAP.
Markus -
Two emagent-Services on a one Database system
Hello,
maybe someone can answer my question, which I am working on since several days.
I installed Oracle 10g Database and created a Database, after that I had one OEM running and accessible using the normal URL host:1158/em.
After installing Oracle HTTP-Server and Application Express there is another OEM-Service running, that I cannot access.
I had a look at the Process and Port-List and found out that one is started from the Database_Home and the other from the Http_Home.
In the Port-List there was one java.exe on Port 1158, which I can access, and another two listening on 1810 and 1850 which I am not able to access.
Furthermore there are two emagent processes shown, where one has two connections established on different ports and is listening on a third and the second process is listening on a single port.
Since both processes have there own java instance running, consuming dozens of MB virtual and RAM space, I would like to know if I really need the second emagent that I probably installed with the HTTP-Server.
And if I do not need it, how I can stop it, because there is no entry in the Windows services list to stop this service.
Kind regards
AlexAre you sure that while installing the Application Express you did not create a new database instance? I think that windows starts one emagent for each DB instance that has been created. It might be that installing Application Express you accidentally created a new instance? Or maybe you did the DB creation process more than once without dropping the previously created instance? I remember I used to have 4 instances running, each of them with their processes and my system became very very slow.
In the Oracle_Home/install/portlist.ini there is the list of the ports used by EM and in this file are shown even the previously configured instances EMs even if those instances have been dropped - but the processes should no longer been lunched.
For each instance, in this file the EM shows 2 different ports, one is the HTTP port (in your case 1158) and the other one is the EM agent port to connect to the instance. I have the feeling that one the ports you mentioned 1810 or 1850 should be this port (mine is 1830). You will not be able to access these ports via HTTP. So having one of them in use besides the HTTP service on 1158 should be fine.
Still I think it should not be the case to have 2 EM processes running unless you have 2 instances still active. Are you sure these java.exe processes are EM processes?
Enrico
Maybe you are looking for
-
White Macbook has folder with a question mark inside when powered on.
My brother has a white macbook given to him from a friend and when it is powered on it shows a folder icon with a question mark in the inside flashing and it doesn't boot. He has sent me on a quest to get a power adapter and a new hard drive, He thin
-
HTML Tile loaded dynamically based on user interaction is invisible
When I include an HTML Tile in my application XML file, it shows up fine. When I load it dynamically, it doesn't throw a runtime error but it's invisible. Thoughts? Thanks in advance!
-
Stationery Template - appearance breaks when recipient opens
I've tested several Mail Stationery Templates. They seem to break their formating when I send them to non Mac users (my mother). When I send a test email to myself it looks fine. Any solutions or suggestions? Wish I could attach my mom's reply to sho
-
Hi, I've noticed that sometimes after I expand a zip or rar archive that I can't see the extracted files in the Finder. The fies are visible under the command line but finder doesn't seem to register them. Can anyone suggest what is causing this? The
-
JBoss 7 and BlazeDS Authentication
Hi, Has anybody tried to set up Database authentication and BlazeDS though JBoss 7? I've performed steps I previously used with other versions but still getting the usual error; 'There was an unhandled failure on the server. flex/messaging/security/T