Two R3 servers have the same logical system name?

Can two R3 servers have the same logical system name present in the same network? We plan to clone our production server and let the clone reside in the same network. The clone is identical with the production server with the same SID, hostname, logical system name, but different IP address.

Hi
Check this [Link|http://help.sap.com/saphelp_nw70/helpdata/EN/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm]will cleare you doubt
Regards
Uday

Similar Messages

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

Same Logical System Name, different Business System

Hi all,
I have a problem regarding SLD and Integration Directory. The client is requiring me to use the same logical system name for two different business systems. It seems that this is not possible in XI. When I tried activating the business system in ID, I'm getting the error, 'Logical system XXX already exists in communication component YYY'. Please help. Thanks!
IX

Hi,
You cannot have same logical name for two business systems....
Why you need it?? How will the SAP system understand which which system the message was sent for?? Some workaround like
1. Create a business system with this logical system
2. Overwrite sender/receiver business system in the receiver agreement for messages sent to 2nd business system..
This may lead to discrepancies....
Regards
Suraj

Sending Message Type from the same Logical System to 2 different ports

Hi,
I need to transfer the same message type 'DEBMAS' in the same logical system,
to 2 differenet port - directly to XI (as an IDOC) and to function (as a PROXY),
In XI this are 2 different interfaces.
I see in we21 that when adding message type in outbound I can also write message code or message function so I tried adding an additional row of DEBMAS with message code but it did not work.
Thanks,
Naama

Hey,
This question should not be posted here, but in the XI forum,
anyways,you can do it in 2 ways
1) You can send the message to XI, and in XI it should be configured to send to
two different places, which can be done in the Receiver Communication Channel, one would be IDoc Receiver and another would be a SOAP Receiver. ( here you send one message to XI and XI will send it to the PROXY )
2) You can specify the settings in your Partner profile (we21)and while generating the Port (we20).
Regards,
Samson Rodrigues.

LMDB - SLD "Source and target system have the same object server name"

Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AM

problem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph

Two classes have the same XML type name??? Please, help...

Hello!
I have a simple web service class. I generated the ws server-side classes using wsgen.
I created a jar file from the generated code.
Then :
Endpoint endPoint = Endpoint.create(
new WebServicesUnitImpl()
String wsFinalName = "http://localhost:9999/akarmi";
endPoint.publish( wsFinalName );
The web service started fine.
Then called wsimport, and the generated classes have been placed into a jar file.
Then called the code like this:
WebServicesUnitImplService service = new WebServicesUnitImplService();
WebServicesUnitImpl unit = service.getWebServicesUnitImplPort();
unit.serviceXXX();
but the code doesn't work at all, resulting this error message:
Two classes have the same XML type name "{http://ws.components.core.ilogique.vii.com/}getMessages". Use @XmlType.name and @XmlType.namespace to assign different names to them.
     this problem is related to the following location:
          at com.vii.ilogique.core.components.ws.GetMessages
          at public com.vii.ilogique.core.components.ws.GetMessages com.vii.ilogique.core.components.ws.ObjectFactory.createGetMessages()
          at com.vii.ilogique.core.components.ws.ObjectFactory
     this problem is related to the following location:
          at com.vii.ilogique.core.components.ws.GetMessages
I have this error report on all generated class file! How can i fix this?
What is the main problem? The SE usage? I copied the lates jax-ws jars into endorsed lib resulting the same.
Any help is appreciate.

Hello!
I have a simple web service class. I generated the ws server-side classes using wsgen.
I created a jar file from the generated code.
Then :
Endpoint endPoint = Endpoint.create(
new WebServicesUnitImpl()
String wsFinalName = "http://localhost:9999/akarmi";
endPoint.publish( wsFinalName );
The web service started fine.
Then called wsimport, and the generated classes have been placed into a jar file.
Then called the code like this:
WebServicesUnitImplService service = new WebServicesUnitImplService();
WebServicesUnitImpl unit = service.getWebServicesUnitImplPort();
unit.serviceXXX();
but the code doesn't work at all, resulting this error message:
Two classes have the same XML type name "{http://ws.components.core.ilogique.vii.com/}getMessages". Use @XmlType.name and @XmlType.namespace to assign different names to them.
     this problem is related to the following location:
          at com.vii.ilogique.core.components.ws.GetMessages
          at public com.vii.ilogique.core.components.ws.GetMessages com.vii.ilogique.core.components.ws.ObjectFactory.createGetMessages()
          at com.vii.ilogique.core.components.ws.ObjectFactory
     this problem is related to the following location:
          at com.vii.ilogique.core.components.ws.GetMessages
I have this error report on all generated class file! How can i fix this?
What is the main problem? The SE usage? I copied the lates jax-ws jars into endorsed lib resulting the same.
Any help is appreciate.

Getting the JAXB exception like "Two classes have the same XML type name-"

Getting the JAXB exception like "Two classes have the same XML type name...",
Here is the exception details:
Exception in thread "main" com.sun.xml.internal.bind.v2.runtime.IllegalAnnotationsException: 1 counts of IllegalAnnotationExceptions Two classes have the same XML type name "city". Use @XmlType.name and @XmlType.namespace to assign different names to them. this problem is related to the following location: at com.model.City at public com.model.City com.model.Address.getCurrentCity() at com.model.Address this problem is related to the following location: at com.common.City at public com.common.City com.model.Address.getPreviousCity() at com.model.Address
at com.sun.xml.internal.bind.v2.runtime.IllegalAnnotationsException$Builder.check(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl.getTypeInfoSet(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl.(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl$JAXBContextBuilder.build(Unknown Source) at com.sun.xml.internal.bind.v2.ContextFactory.createContext(Unknown Source) at com.sun.xml.internal.bind.v2.ContextFactory.createContext(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at javax.xml.bind.ContextFinder.newInstance(Unknown Source) at javax.xml.bind.ContextFinder.find(Unknown Source) at javax.xml.bind.JAXBContext.newInstance(Unknown Source) at javax.xml.bind.JAXBContext.newInstance(Unknown Source) at com.PojoToXSD.main(PojoToXSD.java:17)
I took the example like:
package com.model; ---->this package contains 'Address' class and 'City' class
public class Address {
private String areaName; private City currentCity; private com.common.City previousCity;
package com.model;
public class City {
private String cityName;
Another city class in "com.common" package.
package com.common;
public class City {
private String pinCode;
We need to create XSDs and needs to do the Marshalling and unmarshalling with the existing code in our project(like as above example code), code does not have any annotations like "@XmlRootElement/@XmlType" and we can not able to change the source code.
I would like to know is there any solution to fix the above issue or any other ways to create XSDs and marshaling/unmarshalling(like MOXy..etc)?
It would be great if i can get the solution from any one....May thanks in advance.
Thanks,
Satya.

Getting the JAXB exception like "Two classes have the same XML type name...",
Here is the exception details:
Exception in thread "main" com.sun.xml.internal.bind.v2.runtime.IllegalAnnotationsException: 1 counts of IllegalAnnotationExceptions Two classes have the same XML type name "city". Use @XmlType.name and @XmlType.namespace to assign different names to them. this problem is related to the following location: at com.model.City at public com.model.City com.model.Address.getCurrentCity() at com.model.Address this problem is related to the following location: at com.common.City at public com.common.City com.model.Address.getPreviousCity() at com.model.Address
at com.sun.xml.internal.bind.v2.runtime.IllegalAnnotationsException$Builder.check(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl.getTypeInfoSet(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl.(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl$JAXBContextBuilder.build(Unknown Source) at com.sun.xml.internal.bind.v2.ContextFactory.createContext(Unknown Source) at com.sun.xml.internal.bind.v2.ContextFactory.createContext(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at javax.xml.bind.ContextFinder.newInstance(Unknown Source) at javax.xml.bind.ContextFinder.find(Unknown Source) at javax.xml.bind.JAXBContext.newInstance(Unknown Source) at javax.xml.bind.JAXBContext.newInstance(Unknown Source) at com.PojoToXSD.main(PojoToXSD.java:17)
I took the example like:
package com.model; ---->this package contains 'Address' class and 'City' class
public class Address {
private String areaName; private City currentCity; private com.common.City previousCity;
package com.model;
public class City {
private String cityName;
Another city class in "com.common" package.
package com.common;
public class City {
private String pinCode;
We need to create XSDs and needs to do the Marshalling and unmarshalling with the existing code in our project(like as above example code), code does not have any annotations like "@XmlRootElement/@XmlType" and we can not able to change the source code.
I would like to know is there any solution to fix the above issue or any other ways to create XSDs and marshaling/unmarshalling(like MOXy..etc)?
It would be great if i can get the solution from any one....May thanks in advance.
Thanks,
Satya.

Changing the default logical system names for adaptive RFC models

Hello,
When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
Thanks in advance!
David.

Suresh,
Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
Hope that clears up what I'm looking for.
David.
Message was edited by:
David Z. Pantich

Can I use two apple TV on the same wifi system?

Can I use twoo apple tv on the same wifi system??

Winston, what sort of set up do you have for 10 apple tvs? - I currently have 2 and cannot stream different movies successfully at the same time to both of them from a single macbook pro. I am looking at upgrading to a system with a macbook mini or server streaming different content to 3-5 apple tvs. Currently all streaming is on the same channel and via 2 airport extremes and a new express. Still finding the system very very slow.

Import ID Configuration Scenarios and keep the same Business System names

Hi Guys,
Is it possible to transport ID Configuration Scenarios Objects between 2 XI systems and keep the same names for both sender and receiver Business Systems ? That is, to skip the SLD lookup for transport Source and Transport Targets systems ?
I tried to create the same Business Systems under the same name twice, but this was not possible. Any ideas ?
The reason is that I want to transport all the objects from one XI DEV server to another XI DEV server.
Thank you,
Best Regards,
Evaggelos Gkatzios

Hi,
We have done same but with bit of manual work (without Transport).
Create SLD object in target system with same name as in Souce XI system SLD.
IR & ID was exported using TPZ files from Source system & were imported in Target system.
It used same object names in both XI systems.
Regards
Sushil

Can there be more than one port for the same logical system

Can we have more than one TRFC port for tranferring data from one logical system to another?
The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.

Hi Shital,
I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
Advantage: Your task would run, no performance problem (http: very good, asynchron)
Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
Regards,
Udo

Two Managed servers in the same apahce.

Hi,
I did not have too much experience with WLS, I have two manged servers which listened on diff port, and I tried to configure them in one apache instance..
do u know how to do it? I have tried this:
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<IfModule mod_weblogic.c>
MatchExpression app1 WebLogicHost=192.1.1.87|WebLogicPort=7100|Debug=ON
MatchExpression app2 WebLogicHost=192.1.1.87|WebLogicPort=7200|Debug=ON
</IfModule>
And got the following error:
[Mon Jun 23 15:43:41 2003] [error] CONFIG_ERROR [line 1309 of ap_proxy.cpp]: Neither 'WebLogicCluster' nor 'WebLogicHost' specified in parameters
My WLS: 7 sp2 and apache is 2.0.45.
Appreciate your advice...
Regards
Leo

You can have more number of soa servers in a SOA domain. You can create mutiple managed servers using config wizard. But when you create more than one soa servers, then all the servers should exist in the same cluster.
You can not have the soa servers outside the soa cluster.

Two CAS Servers on the same domain but different AD Sites

I have a customer that has 1 EXCH MB server & 1 EXCH server running the Hub Transport and Client Access roles. These two servers are in the same domain and reside in AD site A. Now he wants AD Site B (also in the same domain) to have 1 EXCH MB server
& 1 EXCH server running the HUB/CAS role. The problem is the CAS role in site A is the only one that is public interfacing. The CAS server in site B has not certificates at all, and I want all the mail to re-route to the CAS server in Site A. Does anyone
know how I can do that???

The CAS in the internet facing site will proxy to the CAS in the non-internet facing site. And you do have a cert on that CAS in Site B. The default built-in one. However, if you have clients in Site B, you should replace that built-in cert with one that
is trusted by clients such as Outlook and Lync etc...It doesnt have to be a 3rd party cert, it could be on that is trusted internally.
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
Understanding Proxying and Redirection
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

TA38325 how can two different actions have the same shortcut!?

deleting the master and deleting a version can be both achieved by command-delete (this is how its shown in the apple support documents!). HOW is that possible. How is the system suppose to realize which of the two options I have in mind?

The document cited -- TA38325 -- is wrong (afaict). There is no shortcut for "File➞Delete Original Image and All Versions". You can confirm this by checking the shortcuts listed on your File menu, as well as by searching the Commands dialog for "delete".
The article has been archived (it will not be updated). As it was updated fairly recently (Feb 2012), it would be good if you'd file a report with Apple via "Aperture➞Provide Aperture Feedback"
Good catch, though.
(Screenshot)

Can two different computers have the same Firefox profile? Schema/themes/bookmarks, etc?

I would like the same settings mentioned above on my desktop and laptop. Any ideas? Thanks-

You can use Firefox Sync to keep the bookmarks, passwords and history synchronized. For details on using it see http://support.mozilla.com/en-US/kb/what-firefox-sync?

Two R3 servers have the same logical system name?

Similar Messages

Maybe you are looking for