Two repairs and still no good! AAAAAARRRRGHH!!!!

So yesterday the local service center takes my laptop to repair it.
New logic board - again.
New power inverter for the screen
New Super Drive.
Thanks to help her it was pinpointed that my SD was busted.
SO I'm in the office to burn backups of the Lacie Drive so I can use it for daily backups of the MBP. What happens?
First 4 DVDs the machine spits out and won't accept.
Then it happily burns two (and I can read them!)
Then it spits out another three DVDs it doesn't accept.
So my MBP has been in for repairs twice. It is 7 months old. I'm seriously considering selling it while still under waranty and downgrade to a PB instead. This is seriously doing my head in.
A friend in Canada had his MBP blow up twice. He's going to sell his and get a 17" PB instead of the 15.4" MBP. A mate in UK found his battery swollen and cracked, he's lost keys on the keyboard as well.
Apple and the factories who built these things really went to town with making them crash.
I thought I'd never say this but I'm so disappointed I'm contemplating going back to PC.
ARGH!

Does anyone actually read Terms & Conditions? I thought it was just one of those annoying pages you scroll to the bottom to tick a box and move on.
Yes, there was supposed to be a question in there but it fell off the screen.
How many repairs does a MAC have to be sent in for before Apple will replace the entire thing?

Similar Messages

  • I have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

    i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

    Be good to know what the diagnostic results are.
    I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
    iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
    tt2

  • I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on.

    I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing

    iOS: Not responding or does not turn on - Apple Support
    try this but maybe terminal if no result

  • I can't open my itunes store.  I can open my music library and sync but not open my music store. I have deleted and reinstalled ituens and still not good.  Help

    I can't open my itunes store.  I can open my music library and sync but not open my music store. I have deleted and reinstalled ituens and still not good.  Help

    I assume you are talking about iTunes on your computer, if so, you will have to remove all Apple programs associated with iTunes:
    iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support (iTunes 9 or later)
    Make sure everything that is by Apple is removed including Safari. You can sort by "Publisher", when you uninstall programs. Make sure you have at least one other web browser (like Firefox or Internet Explorer) before removing Safari. That way you can go back to the Apple web site and redownload iTunes later.
    Reboot the computer then reinstall iTunes. Everything should work normally.

  • How long should it take to convert an 80 page doc?  It's been two hours and still not working

    how long should it take to convert an 80 page doc?  It's been two hours and still not working

    Hi Mary,
    I apologize for the delay. What size if your document? There is a 100MB limit.
    Let me know!
    Looking forward to hearing back from you.
    Kind regards, Stacy

  • 1 month for repairing and still waiting !!!!

    This is my real night mare and Nokia Thailand can do nothing !!!!!
    Already 1 month and still dont know when it will be last. There is no solution for me accept waiting, and yes Im doing. Can anyone help me on this?? Im dont want to wait anymore!!!! 
    BR
    Great 

    hi mate, this is between you and the Nokia Care point, as they are run independently of Nokia. if they are being less than helpful, you can contact Nokia Thailand directly by clicking the Nokia Support link at the bottom of this page.
    as for the status of your repair, it may be an issue of the phone having more serious damage, and also the fact that many businesses close down over Christmas and the New Year, so you do need to take this in account.

  • ITunes match after two days and still not workin

    It has been two days since i started the match process. I am about 1/5th of the way through Itunes searching my library (the first step) and it doesn't get past that. I have firced quit, restarted and reinstalled itunes and still the same issue. This is a bumber since i have already been charged for the service but have not been able to use it.
    Has any one else been through this? To have itunes match not get past the first step and just freeze?
    Any and all help would be great!
    Thanks,
    Jeff

    I have had the same problem. Here's my experince so far and the latest progress I've made:
    - I have my music spread across my iPod (70Gb), MBP (small amount of music), and another Nano. Not all sync'd automatically, as I like diffeent stuff on different places. Most of it is music that I brought in to iTunes from my own CD collection, the rest is purchased via iTunes.
    - If I leave my iPod plugged in while Match is running - it never, ever completes. Tried this over Christmas and left it 9as others have) for several days. Craps out every time. Even if left for days "apparently" doing something. It never gets beyond Step 1 of the match process, and tiehr spins forever, or ultimately craps out with an iTunes error number.
    - When I disconnect all iPods - hey presto - it works. It completes steps 1,2,3 of the process. Of course, this means it's only doing the library that's on the MBP for now.
    - My next step is to re-connect the iPods (one at a time) and see what happens. Will report back when I've tried this.
    Sean

  • Using 20GB a month for two phones and STILL getting overages.

    My gf and I have an iPhone 6 and the 5C. We don't have wifi at home, but we do at work and school. We are hardly ever home for anything but sleeping and the occasional day off spent doing nothing. But we're going through 20GB of data and still going over the limit a few days before the cycle ends. I called to find out why it's doing this. We were using 4 GB a month with verizon, and never used all of it. The only thing they could recommend was to turn off data for apps, turn off push notifications, etc. things that we've already done because they're obvious. They aren't trying to address the problem at all. So what I'm wondering is, is this a normal amount of data usage with att? Or no?

    It's not AT&T, it's your phones.- Start doing a daily data check by calling *3282#- verify that your wifi is turned on and connecting when within a network- check your wifi connection before watching any videos or facetime or sending pics or downloading anything- see which apps are using the most data

  • HDCam 1080i to ???? for PC and still look good compressed?

    Client has asked for 1280x720 compressed in a codec that a PC can read via After Effects. Eventually they want to go to Flash. Their source is HDCam 1080i.
    I've captured via FCP 6/AJA Kona LHe in Apple 10bit 4:2:2 Uncompressed, then let Compressor 3.0.1 turn it into Animation codec and H.264 in order to give them a file size they can work with. The H.264 and the Animation file look like the field order is messed up. But Compressor's frame control is set to Automatic and when it isn't it wants to deinterlace and take 2 hours or more to render a 5 second clip. I've got almost twenty minutes of material to process so that isn't a real world workflow.
    They've come to me as a service bureau to give them a file they can work with. I just can't figure out what kind of file would work. I'm wondering if there is something wrong with the compression I've used or is this just state of the art for Compressor?
    Look at some screen grabs of the original and the resultant H.264 (the animation codec has the same jaggy/zipper/comb effect on the edges. Look at the edge of the car and their clothes, etc.)
    http://www.countdownvideoproductions.com/jaggies.html
    What's the best way to get from the Apple Codec into a PC they can use and have the file not be so large, yet look good (unlike Compressor's output to H.264 and Animation)?
    Graeme where are you?

    Cinephile8 wrote:
    ... I'm licensing images from a company that offers two sizes: 200 and 800 KB. ...
    kB doesn'r measure the 'size' of a picture in terms of 'looking good', if you don't know resolution, bit-depth, codec etc.
    a jpg, showing plain blue rectangle of 3000x5000 pixel with <20kB could look much better than a 16bit.tiff of 480x360 pixel...........
    Brad told you about res of HDef video.
    if you don't plan to add massive Ken Burns Effects, this res is enough.
    a less compressed pic (same res, but more kBs) will finally deliver better quality, forinstance less probs with 'banding'.
    I would purchase the same picture in BOTH 'sizes' and make a test, including final delivery (YouTube, DVD, web, Vimeo, projection, whatever) .... and judge with your own eyes, what fullfills YOUR criteria of 'quality'.

  • Water spill 5-6 months ago and still works good as new

    Hello lenovo users,
    I spilt some water on my thinkpad edge 11 around 5-6 months ago, and it is still working as good as ever, absolutely no signs of any source of water at all, or water damage signs, The amount was not a lot.
    Should I be worried ?
    Also, In addition to asking here, I asked teh local PC shop & the person advised me that there is probably no damage if after this long is still working as per usual, and I am very lucky.

    WwariosS wrote:
    Yes you are lucky, I just spilled water on my T510, still in coma
    that must suck, especially since the non thinkpad edge series are supposed to have drain holes.

  • I have a MacBook Pro, it recently started freezing upon startup. It would get to a blue screen and just sit there. I've tried booting in safemode to run disk repair and still doesnt help. If I do manage to get past the blue screen, it still freezes

    My mac keeps freezing upon startup. It will get to the blue screen and promptly freeze. If I manage to get past the blue screen, and open up youtube on google chrome, it will freeze before it loads youtube. I've tried safeboot and disk repair, nothing seems to work. I even tried to factory reset it but it wont connect to my internet when I reboot with power + option.. any ideas?

    This can be used to boot the machine and delelte enough files to get it to boot normally.
    .Create a data recovery/undelete external boot drive
    Read about storage drive so you can store your extra stuff.
    Most commonly used backup methods
    Also here to see how a full boot drive slows the machine down
    Why is my computer slow?

  • 2009 macbook pro incorrect number of file hard links. repaired and still slow. I replaced the hard drive within the year and it's 1 tb not full. help!

    I have a 2009 macbook pro and I keep it up to date. I replaced the hard drive with a new 1 tb hard drive within the last year. It is not even close to full. The other night I was doing a time machine backup and the spinning color wheel appeared. It would not go away and the only thing I could do was restart the computer. The Grey apple screen appeared and nothing else happens. I restarted in disk utility and verified the drive. It said "incorrect number of file hard links". I repaired it successfully and check the drive as well as the startup drive. All was ok. I restarted my computer and it took forever to come on. It is now one but I can not do anything. The desktop and all appropriate dock items are there but I can not do anything. What should I do?

    It's likely that the startup drive, or some other hardware component, is failing. Back up all data immediately, then run Apple Diagnostics or the Apple Hardware Test.
    Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

  • Lightroom 4.0 - Two Months and still NO FIX!

    It has been over two months since the release of LR 4.0. From the start there were problems. The main issue is performance.  See http://forums.adobe.com/thread/971581?start=0&tstart=0  Over a month ago the second RC was released to address many of the issues. Still complaints contuned. The offical ADOBE blog has since been very quiet on fixes or the continued issues.http://blogs.adobe.com/lightroomjournal/  What a black eye for ADOBE. I have held off updating my photoshop because I no longer trust this company to stand behind thier product.

    The latest RC expires at the end of June.  History shows they generally release the final on the order of a month before expiration.  Therefore, based on history, it shouldn't be too long before either 4.1 final or another RC is released.  Further, it's not like they've all been on vacation all this time.  They've been working on the application so hopefully the final will have fewer bugs than either RC.

  • Over two weeks and still no phoneline or internet ...

    No phone line or internet...Reported fault on 17th December, told would be fixed by 20th December, Called on 20/21 december to be told the fault was LOST in the system they would close it and re open.... told would be fixed by 25th December then told by 2nd January... Guess what... STILL NOT FIXED, UTTERLY DISPLEASED BT! also customer service is rubbish when calling to get update!
    Had to miss searching for santa with the kids, paying for lovefilm etc without being able to watch the service, paying linerental to BT for nothing as can not use free evening or weekend calls.... unable to access any internet... and when i call BT, all i get is it will be fixed as soon as possible but it is a major fault... yeah i know, so fix it already

    Hi suzz69uk,
    Thanks for posting. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Arrrgh, two hours and still "Completing Activation"...

    The subject pretty well says it all, got the iPhone 4 this afternoon and
    after starting the Activation process it has been sitting there with
    "Transfer of you existing phone number is in progress"
    for at least 2 hours.
    Should I unplug and try again?
    Jerry

    try rebooting the phone. mine was stuck on " completing activation" for a little bit and then i unplugged and rebooted. it was activated once i turned the phone back on. good luck!

Maybe you are looking for

  • Getting cl_abap_structdescr for method parameters of LOCAL classes?

    Hi guys I have a bit of a of a problem with getting an instance of the cl_abap_structdescr class for a method parameter type of a local class. The RTTI structure abap_parmdescr can only be used to diffrentiate between the basic built-in ABAP types an

  • How to  handle blocked cost centers from Payroll to FI (RPCIPE00)

    We have the need to do retro payroll adjustments - the problem is that many times the original cost centers are blocked.  This causes errors in the feed to finance via program (RPCIPE00).  How can we avoid this error?  We have considered using payrol

  • CS5 64-bit Content Aware Fill kills Healing brush, clone stamp

    Here's the deal: 1)  Open image for retouching-background layer only 2)  Make copy of background layer 'cause I never retouch there and CAF won't work on the blank layer I use for all other retouching 3)  Add blank layer above the previous two layers

  • Mac Mini crashes when connected to USB mouse!

    This problem just happened all of the sudden--I came into my office a few days ago and there was the multi-lingual screen of death telling me I needed to restart my computer. Tried numerous times, no success--same message. Took Mac Mini to Genius Bar

  • Using DynDNS and Sharing disks over Ethernet WAN port

    I am having issues accessing the AirDisk from outside my LAN. So here are the steps that I have taken: In the AirPort Utility, I enable "Share disks over Ethernet WAN port". Created a DynDNS account at http://www.dyndns.com so my hostname points to m