Two report join not working

I have two reports: Lead History(registered reciepents) and Campaign Reciepents History(email click-thru reciepents) with columns Full Name, Company/Account Name, and Job Title. I want to do a join that pull out the click-thru's that registered. Union and Union All gives me everything, Minus gives me just the click-thru's, and Intersect gives me nothing. What complicated join can I do to make this possible?

Thank you, Barney-15E and Nerowolfe.
First, you are right - I am using the 17" MacBook Pro (but not the ltest version).
Second, I looked in the Library folders and found Sidetrack in the Startup items. I deleted it (although I had already removed it from the Startup items in the System Preferences.
Third, I reset the PRAM.
However the 2-finger scrolling is still not working. I did notice (and I don't know if this is something new) that the cursor is now immobile when trying to use two fingers although it is fine with one finger. It as though the trackpad recognizes that two fingers are different from one, but it doesn't know what to do with two-fingers.
On a more general note, thank you all for your interest and quick responses. But...what should I try next? Apple suggests resetting the Power Management.

Similar Messages

  • Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

    Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
    SELECT po_header_id, segment1, type_lookup_code
    FROM po_headers
    WHERE segment1 = '5000002'
    Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
    EXEC mo_global.set_policy_context('S',129)
    But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
    ===========
    I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
    I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
    Please suggest. Appreciate your response.
    Thanks,
    Kesava Chunduri

    Hi Hussein,
    Thanks for the quick response.
    Yes, I've gone thru both the notes specified below:
    Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
    - Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
    - For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
    I am able to create the receipt, when i remove this profile option.
    No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
    - I see that the products i am running these reports from AR/GL - already exists in these tables.
    Anything other options??
    Thanks,
    Kesava

  • 1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

    Hi,
    I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
    I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting “CSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23”.
    Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
    Other reports are working fine.
    1. TACAS+ Accounting - not working
    2. Logged in Users - not working
    3. TACAS+ Administration - working
    4. Passed Authentication - working
    5. Failed Attempts - working
    Any suggestions or any idea, please revert.
    Regards
    Vineet

    Hi,
    Thanks
    Yes I have configured the command “aaa accounting exec default start-stop group tacacs+”
    As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
    Regards,
    Vineet

  • Extraction and Reporting is not working in BI SYSTEM

    Hi,
            The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.

    HI,
    If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
    Regards,
    Sharath

  • Web reporting does not work in BW system

    Hi-
    I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
    We get the following message when trying to run BW queries on the web:
    Not found
    The following error occured:
    %3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
    I've checked SICF and all services are activated.  I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there.  Here are our settings:
    rdisp/max_wprun_time                        3600                        
    abap/cache_area                             10000000                    
    abap/buffersize                             1500000                     
    login/system_client                         100                         
    INSTANCE_NAME                               DVEBMGS00                   
    SAPSYSTEM                                   00                          
    rdisp/wp_no_dia                             10                          
    rdisp/wp_no_btc                             6                           
    rdisp/wp_no_vb                              2                           
    rdisp/wp_no_vb2                             1                           
    rdisp/wp_no_enq                             1                           
    rdisp/wp_no_spo                             1                           
    DIR_TRANS                                   /usr/sap/trans              
    ms/server_port_<xx>                          PROT=HTTP, PORT=8080       
    icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
    DIR_ORAHOME                                 /oracle/BWD/920_64          
    ipc/shm_psize_10                            104000000                   
    ipc/shm_psize_14                            0                           
    ipc/shm_psize_18                            0                           
    ipc/shm_psize_19                            0                           
    ipc/shm_psize_30                            0                           
    ipc/shm_psize_40                            114000000                   
    ipc/shm_psize_41                            0                           
    Is there anything obvious missing?
    Thanks,
    Tristan

    Following seems a little odd....
    ms/server_port_<xx> PROT=HTTP, PORT=8080
    I would expect something like:-
    ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

  • Active Report Viewer not working in Internet Explorer 10

    We have many legacy applications developed using ASP and VB(InterDev). Our organisation is moving to use Internet Explorer 10 in the near future.
    We had a IE10 compatibility testing for our legacy applications and we observed that the applications using Active Report Viewer to generate the reports are not working. Applications works perfectly fine with the older version of Internet Explorer.
    We looked for the various workarounds but we did not succeed.
    Some application does nothing when we click on a button to generate the report but some applications throws the below error:
    "ActiveX
    control failed to load! -- This control is required to use the Address Book and Attachment features.  Please check your browser security settings and/or contact PC Support to install the digitally signed control."
    We will be glad if we get any assistance on this issue.

    We have many legacy applications developed using ASP and VB(InterDev). Our organisation is moving to use Internet Explorer 10 in the near future.
    We had a IE10 compatibility testing for our legacy applications and we observed that the applications using Active Report Viewer to generate the reports are not working. Applications works perfectly fine with the older version of Internet Explorer.
    We looked for the various workarounds but we did not succeed.
    Some application does nothing when we click on a button to generate the report but some applications throws the below error:
    "ActiveX control failed to load! -- This control is required to use the
    Address Book and Attachment features.  Please check your browser security settings and/or contact PC Support to install the digitally signed control."
    We will be glad if we get any assistance on this issue.
    Hi,
    There is a more dedicated forum for web development issues
    https://forums.asp.net , I would recommend you post this issue in that forum to get more dedicated supports.
    Thanks for your understanding.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Oracle 9iAS R2 - reports are not working  - JSP Error

    dear All
    We are having issue in our Oracle 9i AS R2, the reports are not working, this thing happend suddenly , while runing any report the following messages are coming
    ==============
    500 Internal Server Error
    OracleJSP:
    JSP Error:
    Request URI:/repdemo/examples/Tools/test.jsp
    Exception:
    org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
         at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
         at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
         at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
         at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
         at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
         at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
         at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
         at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
         at oracle.reports.definition.RWReport.done(RWReport.java:1087)
         at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
         at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
         at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
         at examples.tools._test._jspService(_test.java:292)
         [SRC:/examples/Tools/test.jsp]
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
    -=================
    please help to resolve this issue.
    thanks in advance.
    regards

    Dear All
    Just to share the solution of the problem.
    We restarted the XServer which is on the other machine then Oracle 9i AS Middle Tiere and Infra. Once we restarted the XServer machine, and restarted the reports server , every thing back to normal.
    regards

  • Crystal reports 2008 not working on 64 bit OS

    Hello Everybody,
    I have developed crystal reports in CR2008. My development environment is 32 bit OS with visual studio 2005 and it is working fine. When I deployed  this applciation into 64 bit OS,application is working fine,but  reports are not working/displaying.
    Thanks
    Ram

    I moved your post to the .NET - SAP Crystal Reports forum. You'd never have gotten an answer on the CR Design forum
    More info needed:
    Exact version of CR (Help | About)?
    Web or win app?
    More details on:
    reports are not working/displaying
    Errors? Do you get the viewer? Or just an empty form?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Outer join not working

    Hello everybody,
    I have a folder based on materialized view (Detailed folder). There is another folder which is based on a table (master folder). i have created a jooin and select option as "outer join on master folder". The join is not working properly. Am i doing asomething wrong. Discoverer version is 10.1.2 and database version is 10.2.0.3. i have been creating outer joins among folders based on tables but i am not sure about whats wrong this time??? materalized view defination is as follows:
    CREATE MATERIALIZED VIEW MW
    BUILD IMMEDIATE
    REFRESH FORCE
    START WITH SYSDATE
    NEXT TRUNC(SYSDATE+1)+1/4
    WITH PRIMARY KEY
    AS
    SELECT * FROM VIEW
    Thanx for your help
    Regards,
    Najeeb

    So, let me see if I got this...
    You have a table and a materialized view. There is a join between the two, where the table is the master, and the MV is the detail. The join is set to be an outer join on master. Ultimately, you want to see the values in the MV where the join condition is NULL.
    What boggles me is that you say the query runs fine in the database, but not in Disco. This could mean that there is a condition in the BA or in the worksheet. But, if that were the case, the condition should show up in the SQL generated by Disco.
    It looks like the where clause is the problem. NULL is never equal to anything, so when APPROVEDBY is null, the where clause should fail and no data returned. This explains Disco's behavior, but not SQL's.
    Something to try: Create a calculation in the materialized view folder of the business area like:
    NVL(APPROVEDBY, -1)
    I am assuming that all of your IDs are positive. Then modify the join to use the calculated column. This should convert the NULLS to values, and the report should work.

  • ODS, Inventory cube, and WM- Trying to run a report but not working! Help

    Hi Gurus,
    Hope somebody can help me here....
    I have an Inventory Cube and an ODS on Material Plant and another on Warehouse Management. For my reports I need fields from three of them so I created a Multi Provider by using these. But I have only Material and Plant as common in three of them, which is used in defining the Multi Provider. Along with these I have used some more characteristics which are not common. So now when I run a query on this MP, I am getting a display wherein the common characteristics get the values that are correct but for uncommon chars the values for the kfs from other data targets become blank and an additional row comes too.
    For example, I have kfs like Blocked stock in the cube and in one of the ODS I have kfs like standard price. So, in the query for the char material group which comes from the ODS there are no values for Blocked stock, I mean I can see a row wherein there is a value for Blocked stock and a blank for Standard Price,  in the additional row there is a blank for Blocked stock and a value for Standard price. This is the case with all the other kfs of different info providers.
    Is it because they are not common in all the info providers? Is there anyway to solve this? RRI will not work as I need the KFs from both the info providers.
    I am stuck now with this problem, so any guidence would be a BIG help.
    Thanks

    Is it because they are not common in all the info providers?
    -->Yes
    Is there anyway to solve this?
    --> Yes and no. If there is a join condition between the ODSs that you can use to get the fields on the same row, you can do an infoset.
    --> To achieve something like an outer join, you can create RKF for your base KFs, and restrict them on uncommon chars with 'constant selection'. This may not work in all cases. Search for a blog by Prakash Darzi on 'Constant selection' to understand this.
    If logically there doesn't exist a relation (try to visualise how you will derive your output row if you were given these two in a file or spreadsheet - is there a logical link to connect the two sets of data?) you cannot expect the results that you look for.

  • Left Outer Join Not working in BI 7.0 Infoset

    Hi All,
    I am working on BI 7.0. I have to create a report where I have to display the Target values from a target DSO against the transactional data (Operational data).
    I have a DSO where for a “subteam” value target has been set up on different KPIs.
    In the Info Cube, I have transactional data on daily basis per “subteam”. I have to show the actual and target values.
    I have created an Info Set using Target DSO and Daily operational cube, so that I should able to compare the target and actual values of KPIs, for all the “subteam” values (From DSO, irrespective of whether the data is available in cube for those sub team).
    I have used Outer Left Join in the Info set (DSO on left side), but I am unable to see the desired results. It is working just like an inner join.
    Any Idea why the Outer Left Join is not working? The DSO has only one fey field called “subteam” on which I have set outer left join.
    Regards,
    Amit

    Hi,
    did you solve your problem? because I have the same issue right now: the left outer join doesn't seem to do its job.
    Let me know if you have found a solution, it would be appreciated.
    have a nice day,
    Dominic

  • My excel report is not working in executable file ,however,it works well in vi

    Hi all ,
         Could any one please help me in getting the reason behind the executable file not working for excel report generation,however I can get the same function without any problem in main vi.
    I am attaching my code and executable file also ,please have a look into it and let me know where I am wrong.
    Thanks & Regards !
    sarita
    Message Edited by MindPower on 10-24-2007 01:40 AM
    Message Edited by MindPower on 10-24-2007 01:43 AM
    Attachments:
    test datalog.vi ‏264 KB
    test datalog-NEW.zip ‏1020 KB

    I can't open the vi in the moment. But by your description I think that I know the solution.
    When you build the executable you've to add dinammically the vi's from report generator that aren't in your main vi hierarchy. So, you've to open the vi's and find those that are open trough "open vi reference" and add them dinamicaly.
    And don't know if these tips are enough.
    From NI Zvezdana S.
    "When you use the Report Generation Toolkit to build a stand-alone application with the Application Builder, you must add _Word Dynamic VIs.vi from _wordsub.llb and _Excel Dynamic VIs.vi from _exclsub.llb as dynamic VIs. These two VIs contain subVIs that are called dynamically by the high-level Report Generation VIs. I believe that if you grab these VIs from the (desired office version part of the) installation CD instead of from the development machine, then everything should work. "
    Software developer
    www.mcm-electronics.com
    PS: Don't forget to rate a good anwser ; )
    Currently using Labview 2011
    PORTUGAL

  • Left Outer Join not working in Infoset.

    Hello Friends,
    I have two ODSes , one for planned data (zplan) and other is billing z ods (zsd_o03).
    now the situation is such that in my planned ODS  for one sold to party .
    SOLD TO        MATERRIAL CALMONT     PLANNED QUANTIY
    14315            100                06.2007           54
    14315            200                06.2007           20
    14315            300                06.2007           30
    14315            400                06.2007           10
    But in my Billing ODS iam having for Sold to 14315
    SOLD TO        MATERRIAL CALMONT     ACTUAL QUANTIY
    14315           100           06.2007                  20
    14315           200           06.2007                  30
    And my Bex ouput should be like
    SOLD TO        MATERIAL CALMONT        planned             ACTUAL QUANTIY
    14315            100                06.2007           54                                 20
    14315            200                06.2007           20                                30
    14315            300                06.2007           30                                  0
    14315            400                06.2007           10                                0
    So for this i made one Infoset and these ODses are linked by Sold_to , Materail,
    Calmonth.
    First i tried using Inner joing option , but the bottom two lines were not ciming , so used left outer join , and activated and recreated the query but still its showiong me the output same as inner join .. i.e
    14315            100                06.2007           54                                 20
    14315            200                06.2007           20                                30
    So i checked by writing a ABAP code in Se38 , but there its showing me the correct result ..
    So please anybody help me out because iam thinking that infoset is the right way to do this kind of reporting , or esle shall i make one ODS and populate it through this ABAP code..
    Thanks in advance.

    Hi , can anybody help me in this regard..
    Thanks ..

  • LEFT Join not working

    Hi guys,
    I am not sure why the left join is not working.. when I try to use the and condition out of the left join condition. The database is relational but the requirement is for reporting. I have 2 user inputs and I should get the query results as explained below..
    Let me explain with the sample data.
    Table 1: PRTYPE (P)
    TYPEID CLASSID
    T001 CLS001
    T001 CLS002
    T001 CLS003
    T002 CLS002
    T003 CLS001
    Table 2: EMPLOYEE (E)
    EMPID NAME
    E001 Joe
    E002 Mark
    E003 Lucy
    Table 3: DETAILS (D)
    EMPID CLASSID STATUS
    E001 CLS001 NEW
    E001 CLS002 DONE
    E002 CLS001 NEW
    E002 CLS004 NEW
    Report1:
    Input: PRTYPE.TYPEID = T001, EMPID = E001
    Output:
    E.NAME E.EMPID P.TYPEID A.CLASSID D.STATUS
    JOE EMP001 T001 CLS001 NEW
    JOE EMP001 T001 CLS002 DONE
    JOE EMP001 T001 CLS003 BLANK
    Report2:
    PRTYPE.TYPEID = T003, EMPID = E003
    E.NAME E.EMPID P.TYPEID A.CLASSID D.STATUS
    LUCY E003 T003 CLS001 BLANK
    LUCY E003 T003 CLS004 BLANK
    When I use and condition in left join itself, it works but when I take it to the end of the sql using where p.typeid= T001 and E.EMPID = E001 I am not getting the left join results... It looks like Oracle doesn't like the condition at the end. I hope I am clear on explaining. Please share your experience on how to get it working..
    Thank you

    Hi,
    Welcome to the forum!
    user12118328 wrote:
    I am not sure why the left join is not working.. when I try to use the and condition out of the left join condition. The database is relational but the requirement is for reporting. I have 2 user inputs and I should get the query results as explained below..
    When I use and condition in left join itself, it works but when I take it to the end of the sql using where p.typeid= T001 and E.EMPID = E001 I am not getting the left join results... It looks like Oracle doesn't like the condition at the end. I hope I am clear on explaining. Please share your experience on how to get it working..I'm not sure what you mean. Why don't you post your query? You know, it will be easier for someone to tell you what you're doing wrong if they know what you're doing.
    Are you saying that you get the correct results when you have a cerain condition in an outer join, but that you get the wrong results if you put the exact same condition in the WHERE-clause?
    If so, keep the condition where it does what you want.
    You can usually move INNER join conditions around like that, but never OUTER join conditions.
    As Alex said, if you want help, post executable statement to create and populate your tables with a little sample data, as well as the output you want from that sample data, and your best attempt at a query.

  • Reports are not working in BI 4.1

    Hi,
    Hi,
    Environment: BI 4.1, SAP BW and Oracle 11g.
    Users are imported from BW.
    I am facing issue in 4.1 sp2 After migrating 4.0 to 4.1.
    All UNV reports are working fine except reports on Oracle
    Database in BI launch Pad, those reports are working fine in Rich client.
    I have installed Both 32 and 64 bit Oracle drivers in 4.1 servers.
    Thanks in Advance

    This is a known and common issue and also we have encountered this after moving to 4.1 SP2..
    This is actually related to the DSL bridge service  not available to use or not running which will only affect UNX based report and BICS report but UNV and rich client would work as they do not use the DSL services...The actual reason of this is there are some JAR files which are needed for this service and got corrupted while installing
    You or your admin has two options for this  ( If you already tried creating a new APS dedicated for DSL Bridge and it does not work)
    1.If you have a stand alone installation and not a cluster check the installation log file and repair the installation
    2.This is how we fixed.. If you are in a clustered environment then if the one of the App server is running fine for the DSL bridge server .. We copied the JAR files relevant for the DSL bridge from the APP server which works fine for the DSL bridge server and put those files on the server not working.. once this is applied we needed to restart the server and create the APS with DSL bridge service which started and worked fine..

Maybe you are looking for

  • Itunes and the dreaded !

    hey guys, i just reformated my pc and i was able to transfer my library over replacing the new itunes folder from the fresh install with my old backup folder. This worked perfect.. now im having a problem, my music was always stored on "c->my downloa

  • Using .properties file in web dynpro

    Hi, I am having a requirement. I have to create a .properties file and I have to use it in my web dynpro application. How can I do that? Any help... Thanks & Regards, Raj

  • How to use intel_pstate?

    Ok guys, I recently set up Arch Linux on my notebook. I saw, that the cpu frequency isn't going down to it's minimum while, according to top, only about 0.5% of the CPU is used. When I tried to use cpupower to manage this issue, I discovered, the sys

  • Magic Trackpad gone wild

    Has anyone seen a Magic Trackpad go wild? It seems to be OK all morning then last two days around now all of a sudden it just seems to scroll over and click on everything on my desktop so fast I cannot really see what is happening. Applications launc

  • S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance

    Hi, I am looking to branch off from a line item in the S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance report to the actual posting document. Is there a way to do this? Thanks, Ram Message was edited by:         Ram R