Two report outputs in a single screen
Hi,
I am looking at giving outputs of two reports in a single screen.
I mean one below the other.
We are using web reports and I want to have two reporst made out of differect cubes appear one below the other.
Kindly let me know if this is possible.
Suggestions will definitely be rewarded by giving points.
Regards,
Naveen
Hi Naveen,
In WAD, you can use Generic Navigation Block web item for displaying the Characteristics/Free Characteristics available in the Query.
In the specific properties tab(Web Item Properties->Specific->List of Characteristics) of this web item, you can specify the Characteristics/Free Characteristics which you want to be displayed in the web report.
Since you want the table web item(which shows the report having the free characteristics) to be affected by the drill down in Navigational block, then specify the data provider of table web item in the <b>Affected Data Provider</b> of the Navigation Block web item.
Naveen, it's not mandatory to check the affected data providers if the data providers for both Navigational Block web item and the Table web item are same.
Hope this helps.
Regards
Hari
Message was edited by: Hari Krishnan K
Similar Messages
-
Two ALV Grids in a single screen are overlapping eachother
Hi,
I have created two ALV grids in a single screen. I have used seperate containers for them.
But on executing them , both the ALV grids are overlapping eachother.
Please give me a solution.Hi,
IF w_custom_container IS INITIAL.
Creating Object for the Custom Container.
CREATE OBJECT w_custom_container
EXPORTING
container_name = w_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
CASE sy-subrc.
WHEN 1.
MESSAGE e054. "CNTL ERROR
WHEN 2.
MESSAGE e055. "CNTL SYSTEM ERROR
WHEN 3.
MESSAGE e056. "CREATE ERROR
WHEN 4.
MESSAGE e057. "LIFETIME ERROR
WHEN 5.
MESSAGE e058. "LIFETIME DYNPRO DYNPRO LINK
ENDCASE.
Creating object for the Splitter Container.
CREATE OBJECT w_split_container
EXPORTING
parent = w_custom_container
orientation = 0
sash_position = 30
with_border = 2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 1.
MESSAGE e054. "CNTL_ERROR
WHEN 2.
MESSAGE e055. "CNTL_SYSTEM_ERROR
ENDCASE.
Creating Grid Control.
CREATE OBJECT w_grid1
EXPORTING
i_parent = w_split_container->top_left_container.
CREATE OBJECT w_grid2
EXPORTING
i_parent = w_split_container->bottom_right_container.
Building field catalog for ALV.
Fieldcat for the Detail Record.
PERFORM build_fieldcat USING: c_1 c_code c_output c_check
c_comcode c_olength,
c_2 c_fileno c_output c_check
c_filenum c_olength,
c_3 c_dedcod c_output c_check
c_dedcode c_olength,
c_4 c_dedfac c_output c_check
c_dedf c_olength.
FieldCatlog for the Error Records.
PERFORM build_fieldcat_error USING: c_1 c_pernr c_error c_check
c_person c_olength,
c_2 c_desc c_error c_check
c_descp c_olength.
ALV Display.
CALL METHOD w_grid1->set_table_for_first_display
EXPORTING
i_buffer_active =
i_bypassing_buffer =
i_consistency_check =
i_structure_name =
is_variant =
i_save =
i_default = 'X'
is_layout =
is_print =
it_special_groups =
it_toolbar_excluding =
it_hyperlink =
it_alv_graphics =
it_except_qinfo =
ir_salv_adapter =
CHANGING
it_outtab = t_error
it_fieldcatalog = t_fieldcat_error
it_sort =
it_filter =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
CASE sy-subrc.
WHEN 1.
MESSAGE e076. "invalid parameter combination
WHEN 2.
MESSAGE e001. "program error
WHEN 3.
MESSAGE e078. "too many lines
ENDCASE.
CALL METHOD w_grid2->set_table_for_first_display
EXPORTING
i_buffer_active =
i_bypassing_buffer =
i_consistency_check =
i_structure_name =
is_variant =
i_save =
i_default = 'X'
is_layout =
is_print =
it_special_groups =
it_toolbar_excluding =
it_hyperlink =
it_alv_graphics =
it_except_qinfo =
ir_salv_adapter =
CHANGING
it_outtab = t_output
it_fieldcatalog = t_fieldcat
it_sort =
it_filter =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
CASE sy-subrc.
WHEN 1.
MESSAGE e076. "invalid parameter combination
WHEN 2.
MESSAGE e001. "program error
WHEN 3.
MESSAGE e078. "too many lines
ENDCASE.
ELSE.
CALL METHOD w_grid1->refresh_table_display
EXPORTING
i_soft_refresh = 'X'.
CALL METHOD w_grid2->refresh_table_display
EXPORTING
i_soft_refresh = 'X'.
ENDIF.
Hope it Helps,
Jayant Sahu. -
Need to display two ALV GRIDs in a single screen
Hi,
I have a question, i'm using version 4.6. I want to display 2 ALVs in a single screen or by calling.
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 : Display In a single report
ALV1 report (Editable ,Has to be a GRID)
ALV2 report (Non Editable, Has to be a GRID)
(or)
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 :
ALV1 report (Editable ,Has to be a GRID, with a custom button to call ALV2 hiding the ALV1 ie not visible to user)
ALV2 report (Non Editable ,Has to be a GRID, with a custom button to call ALV1 hiding the ALV2 ie not visible to user)
Please help me <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada GalindoHi
ABAP List Viewer
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Regards
Anji -
Two AlV Grids in a single screen
I want to bring two ALV GRIDS in a single report output screen.How can i achieve this through Classical coding( not OBJECT ORIENTED ). If possible please provide with codes.
thanks,
VenkatHello Venkat
I agree that using fm's this is an almost impossible task whereas using OO-based ALV lists it is just a piece of cake.
For a sample have a look at report ZUS_SDN_TWO_ALV_GRIDS in thread alv
or report ZUS_SDN_THREE_ALV_GRIDS in thread Alv
Regards
Uwe -
Three normal alv output in a single screen
Hi,
SAP ABAP EXPERT,
i want to add 3 normal output of alv in a single screen without using any container can it be possible?
suggest me suitable method for that ASAP.
thanx n regards
pankajHi Dear,
yes it is possible.
See at what respect u want to display three ALv ouput that i donot know.
But suppose in ur ALV 10 fields are there and whenever the 1st field data will differ it should show as another Block and so on like Page -break it is possible .
For this just use sort
and give *
Another way Class using Container
then Block List
Thanks
Arbind Prasad. -
Two grid display in a single screen
We need to display two grids in a single screen. In first grid we will display the line items and in the other one we need to display the error logs encounterd during the execution of program. Can anyone let us know any way we can do this.
Hi,
In one screen . Put 2 containers with different names.
cont1,cont2
on each of the container call grid,grid1 like below .
1. this is for item line display
IF g_r_grid IS INITIAL.
CREATE OBJECT g_r_cont
EXPORTING container_name = 'CONT1'.
g_r_variant = sy-repid.
*--Build field catalog
PERFORM build_field_catalog.
*--Layout selection
g_r_layo-cwidth_opt = g_c_set.
g_r_layo-no_rowmark = g_c_set.
g_r_layo-sel_mode = space.
CALL METHOD g_r_grid->set_table_for_first_display
EXPORTING
i_buffer_active = g_c_set
is_variant = g_r_variant
is_layout = g_r_layo
i_save = g_c_set
i_default = g_c_set
CHANGING
it_outtab = g_t_alv
it_fieldcatalog = g_t_fieldcat
it_sort = g_t_sort.
endif
1. this is for error data display
IF g_r_grid1 IS INITIAL.
CREATE OBJECT g_r_cont
EXPORTING container_name = 'CONT2'.
g_r_variant = sy-repid.
*--Build field catalog
PERFORM build_field_catalog.
*--Layout selection
g_r_layo-cwidth_opt = g_c_set.
g_r_layo-no_rowmark = g_c_set.
g_r_layo-sel_mode = space.
CALL METHOD g_r_grid->set_table_for_first_display
EXPORTING
i_buffer_active = g_c_set
is_variant = g_r_variant
is_layout = g_r_layo
i_save = g_c_set
i_default = g_c_set
CHANGING
it_outtab = g_t_error
it_fieldcatalog = g_t_fieldcat
it_sort = g_t_sort.
endif -
ALV Report output as per selection screen
Hi,
I got a requirement. In selection screen there is field where i can entered 1 to 12 numbers. When i entered a number, so that in output of an alv report should display that many fields
for eg.
if i entered 5 in selection screen
in out put 5 fields of alv report should display.
Thanks....
Moderator message : Spec dumping / Outsourcing is not allowed. Thread locked.
Edited by: Vinod Kumar on Jul 15, 2011 11:34 AMhi,
u sort the internal table by the materials in our variant.
like sort itab by jtab
itab consists of all materials
jtab cosists of materials in variant.
hope it may helpful,
regards,
chandu -
Report Output in a single page,
I have a report which is registered in apps, the ouput is around 20 pages,
now my question is, is there any options to get the ouput in a single page with out any pagebreaks.
help needed urgent
thanks in advanceHi,
I was facing problem like this, I checked the style which I was using currently for the report, by default it was having 66 lines per page, you do one thing create one new style and place the maximum no of lines per page you like means 1000 etc. and attach this style also to any printer or noprint then run the report, this may solve your problem.
Thanks
Shishu Paul-Mumbai -
Is it possible to generate multiple reports output in single click
Hi All,
I am using OBIP 10.1.3.4.1
I am having 5 reports in a folder. I want to generate all the 5 reports output in a single.
Is there any possibilities to do it.
Regards
BalajiHello Balaji,
You can schedule the reports at the same time and send the output on the e-mail.
You cannot use Interactive View for viewing 5 outputs on the same time.
Regards,
Liviu -
Report Output appears diffrently
Hi,
The alignment of the labels Report Output appears differently in the different 3 views:
a) Report Output viewed on the screen.
b) Report Output viewed on the paper after screen.
c) Report Output viewed on the Layout Editor of the Report Writer.
If you have some solution or work around,Pl give the feedback.
Thanks & Regards
Vishal
nulluser10101961 wrote:
Hi,
Oracle report output file getting line duplication. If its 2 line, the o/p get 4 lines. If its 3 lines, the o/p get 9 lines. If its 4 lines, the o/p get 16 lines. How to resolve this issue,
Regards
S.ArunWhat is the type of this concurrent program?
Can you post the code here?
Thanks,
Hussein -
Set Default Layout in Reports in a Single Screen
Hi,
We have a report, with one screen. But is is divided into 2 parts. The upper report is showing different data compared to the data shown in the lower report.
We have used OO to display the output. However, when choosing the default layout for each of the section, since it is contained in a single screen, it will only retrieve one default layout for both report. Is it possible to set a default layout, each for the two sections of the report?
Thanks,
LouisseHi
If you're using ALV OO, you can manage several variants in the same report, that means a specific variant for every grid.
It needs to set a different value (for every grid) in the field IS_VARIANT-HANDLE (IS_VARIANT is a parameter of method SET_TABLE_FOR_FIRST_DISPLAY, structurated like DISVARIANT).
data: lt_varuant1 type disvariant.
data: lt_varuant2 type disvariant.
lt_varuant1-report = sy-repid.
lt_varuant1-username = sy-uname.
lt_varuant1-handle = 'ALV1'.
CALL METHOD grid_1->set_table_for_first_display
EXPORTING
IS_VARIANT = lt_variant1
lt_varuant2-report = sy-repid.
lt_varuant2-username = sy-uname.
lt_varuant2-handle = 'ALV2'.
CALL METHOD grid_2->set_table_for_first_display
EXPORTING
IS_VARIANT = lt_variant2
Max -
Hi Experts,
I want to display two graphs in a single screen. It should be a pie chart.
Currently I did one pie chart using GRAPH_MATRIX_2D.
It is working fine.
But i want to display another PIE Chart within the same screen.
Can anyone help me sort out?
Thanks in advanceHi Vimal,
Go throungh the following code. it will help you.
REPORT Z_3DGRAPH.*structure declaration for performance measurementTYPES: BEGIN OF ty_performance,
company(15) TYPE c,
q1 TYPE i,
q2 TYPE i,
q3 type i,
q4 type i,
END OF ty_performance.*structure declaration for options table
types : BEGIN OF ty_opttable,
options(30) TYPE c,
END OF ty_opttable.*Internal table and work area declarations
DATA: it_performance TYPE STANDARD TABLE OF ty_performance,
wa_performance TYPE ty_performance.DATA : it_opttable type standard table of ty_opttable,
wa_opttable type ty_opttable.*initialization event
INITIALIZATION.*start of selection event
START-OF-SELECTION.*clearing the work areas
CLEAR WA_PERFORMANCE.
CLEAR wa_opttable.*appending values into the performance internal table
wa_performance-company = 'Company A'.
wa_performance-q1 = 78.
wa_performance-q2 = 68.
wa_performance-q3 = 79.
wa_performance-q4 = 80.append wa_performance to it_performance.wa_performance-company = 'Company B'.
wa_performance-q1 = 48.
wa_performance-q2 = 68.
wa_performance-q3 = 69.
wa_performance-q4 = 70.append wa_performance to it_performance.wa_performance-company = 'Company C'.
wa_performance-q1 = 78.
wa_performance-q2 = 48.
wa_performance-q3 = 79.
wa_performance-q4 = 85.append wa_performance to it_performance.*appending values into the options internal tablewa_opttable-options = 'P3TYPE = TO'.
APPEND wa_opttable TO it_opttable.wa_opttable-options = 'P2TYPE = VB'.
APPEND wa_opttable TO it_opttable.wa_opttable-options = 'TISIZE = 1'.
APPEND wa_opttable TO it_opttable.*calling the graph function module
CALL FUNCTION 'GRAPH_MATRIX_3D'
EXPORTING
col1 = 'Quarter 1'
col2 = 'Quarter 2'
col3 = 'Quarter 3'
col4 = 'Quarter 4'
dim1 = 'In Percentage%'
set_focus = 'X'
titl = 'Company Performances'
TABLES
data = it_performance
opts = it_opttable
EXCEPTIONS
others = 1.
Regards,
Rajesh Kumar -
Header and item details on same screen in form of two reports
Hello,
I would like to print in a same screen two ALV grid with different command for each.
The two grid will be linked.
One is the header of the datas and the second represent the items of the selected data in the the header grid.
example user will get all sales order details and when user click on any sales order than on the same screen below i get the item data of that sales order...
how can i do that
Do you have any example for me, please ?
Thanks in advance for help,
Best regards,
TaranHi
use ALV hierarchial display function module for this.
see the sample code for this
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
*{ INSERT UKMK900355 4
zhu_to_link, "AS03
*} INSERT
zpallettr,
vttk, "MB01
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel, "RM050906
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor, "MB01
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route, "MB01+
zzexproute LIKE likp-zzexproute, "MB01+
zzroute2 LIKE likp-zzroute2, "MB01+
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE, "ANV SR#11523
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+ -
How to get report output on screen as well as in spool?. Spool to be mailed
Hi All,
Can any guide the approach for:
Foreground run:
Get report output on screen as well as generate a spool. The content of spool needs to be mailed.
Background run:
we need to generate the spool and mail the spool contents.
Am aware of usage of FMs
1. GET_JOB_RUNTIME_INFO
2. RSTS_GET_ATTRIBUTES
3. CONVERT_OTFSPOOLJOB_2_PDF
4. SO_DOCUMENT_SEND_API1
Regards
RajHi All,
I had solved the issue by having two separate blocks for processing based on mode of execution.
Background:
1. Initiate spool
2. Write the summary
3. Close spool, build PDF and mail the same.
Foreground:
1. Initiate spool
2. Write the summary
3. Close spool, build PDF and mail the same.
Write summary again (for display on screen).
Regards
Raj -
TWO DATASETS WITH TWO REPORTS IN SINGLE RTF
Hi All,
i want to use two datasets in BIP followed by single RTF having two different reports(DS1-Table1,DS2-Table2) we are using SQL queries for the dataset please give some suggestions how to connect two diiferent datasets with two different tables in a single RTF
note:
output of dataset 1 should come in table 1
output of dataset 2 should come in table 2 and both this tables are in single rtf
we have used Concatenate operator in BIP but its doing Union and thrwing the output in single table not in two different tables please help
regards
bhaskarTable 1
0-1 year Over 1year Total
LC 0.00
Guarantees 0.00
Others (specify) 0.00
Total 0.00 0.00 0.00
=======================================================================================
Table 2
0-1 year Over 1year Total
Unutilized Lines of Credit 0.00
Unutilized Overdraft Facilities 0.00
Others (specify) 0.00
Total 0.00 0.00 0.00
We are using two different SQl queries for the table 1 and table 2 this two tables should appear in Single RTF
i.e sql 1 should come only in table 1
and sql2 should come only in table 2
i have used Concatenate operation in BIP with multiple datasets its repeating in single table1 and i am unable to split them into two tables please help on this
Maybe you are looking for
-
Ovi Suite will still not update - "Install packet ...
First the update does not want to install due to a bad signature, now I am now receiving the error "Internal error" "Install packet ID not sent" can someone at Nokia please fix the update errors so that we can update Ovi suite? Surely it is not too
-
I cannot send mail with my ipod touch using my icloud account
-
Hi @ all, when I try to export a chart to excel the chart is only partly seen. Means there are 50 categories but only 35 are displayed. Can anybody help? Which settings are wrong? Thanks in advance. Jule
-
Lenovo U410 Touch "Machine type"
I want to know what "machine type" number Lenovo U410 Touch have. Anybody knows? I know it's 4376 for normal U410, but I don't know one for U410 Touch...
-
Mail marks receipt time earlier than actual
In a small office with 5 macs. One of two running 10.4.10 using mail shows time received (in the upper part of the message) as 28 minutes earlier than when they were actually sent. The other mac does not have this problem. With the problem one, print