Two SAP system in one host and one oracle software

Hi SAP Gurus,
We want to install Two SAP system (PR1 & PP1) in one host(Prdb05) and one database (Oracle). I dont want to do MCOD.
I am very confuse about what changes i need to make before start the install of PP1. Actually i do not required to install oracle software again. am i correct ?
also i do not required to install oracle client again.am i correct ?
Will it take software automatically ?
In SAP note 350251 they asked me to run ./runinstaller !!! but when we
are not installing software again why we need to to execute that.
Will you please guide us for the same.

Hi , This is what you have to do .
Couple of questions before i answer anything
1) Is your first SAP system installed ?
2) is this High Available system
What Oliver suggested is a valid option on Windows , but not on Unix .
In Unix you might face problems for user,groups because the user for ORACLE_HOME should ideally be ora<SID>, and if you have 2 SID and one ORACLE_HOME , which user will you give ?
So , it is better that you have 2 seperate oracle software installed , 2 seperate ORACLE_HOME , 2 seperate filesystems for oracle software .
Hope you understood , what i am trying to say .
Thanks
Prasannna

Similar Messages

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Is it possible to install two SAP system with same SID but different instance numbers on one host?

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
If yes, then how?
If no, then why?
Thanks in advance.
Regards,
Sarim

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
The next issue will be with the SAP file systems like /sapmnt/SID
The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
These are few of the many problems I can think of.
So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
Regards
RB

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

We have two iPhones, one iMac, and one iTunes account. Can someone tell me an yeast way to manage each iPhone separately- that is -- when we connect each iPhone how do we keep our contacts separated? this is a real problem. Thanks

We have two iphones , one imac , and one itunes account. Hope someone can tell me an easy way to synch each iphone so that our contacts stay separate. I would like to share itunes music etc but not synch the same contacts to each phone...major problem... Thanks!

You have a few options which are detailed here:
http://support.apple.com/kb/ht1495

Hi. I currently have two iPad's and two iPhones and one Apple ID, I want to keep the current Apple ID on one iPad and one phone and set up another Apple ID for the second iPad and iPhone, is this possible?

Hi. I currently have both my iPhone's and iPad's on one Apple ID and I was hoping to use one iPhone and one iPad with another Apple ID, does anyone know if this is possible and how I would do it.
Thanks TMM39

You should be able to. The only hiccup will be that any apps that you have purchased with the older ID you will have to repurchase with the newer ID to be able to keep using them.
Though of course this actually depends on how you plan to use the IDs. For example, I had an Apple ID through iTunes a few years before I opened a .Mac/MobileMe account (what iCloud is now in case you are new to Apple). Thus, my iPhone and iPad actually have two IDs on them, one for iTunes/App Store, and one for anything associated with iCloud. I've never really had any problems assoctiated with having two IDs on one device. Usually just an extra step when I get a new device or have to restore either of them for some reason. Though I understand that this is probably not what you plan on doing, I thought I would use it as an example of what the IDs are really associted with on the devices.

HT1660 I have two iTunes libraries on two different pc's (one windows and one Mac). Can I consolidate these on an external hard drive?

I have two iTunes libraries on two different pc's (one windows and one Mac). Can I consolidate these on an external hard drive?

I'm sorry I just saw the last post. I had two users on my hard drive, one for me and one for my daughter, but I am not sure what you mean by partioning my external????? I have heard the term before, but don't know how to do it. I am having serious crashing issues with this computer and believe I really need to do a clean install. I just want to make sure everything for both ipods is safe (is???? I think so, everything is......I hate when the English language does this to me!)

Two SAP systems in the same host "no files processing"

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

Can two accounts just use one macbook and one iphone.error occurred talking to the iTunes store

I have two accounts(A and B), of course I just use one iphone and one macbook.
but now ,the problem is,
the account A can use xcode organizer to upload App,
and the account B can't upload in the same MAC and Xcode,
the error message is: error occurred talking to the iTunes store
and the console print: *** Error: An error occurred while deserializing the JSON request. Error Message - Invalid JSON character read at index 0
(of course if I change from account B to A, upload success）
it cotinue for three days, of course there are many people have the same problem.
must I buy another iphone ,another macbook,and install another xcode
I am so sad.
thank you

the problem is , .ipa can't upload by(in) account B
I think the bug can be two possible list blow
      1. the .ipa is wrong
      2. the account(B) is wrong.
if   the .ipa is wrong
the .ipa can't upload by any account (account A or account B, just change the identifier and the sigh identity)
but if the .ipa can upload success by account A,
so , the .ipa(program) is right.
then, there is exist only one possible,   the account (B) is wrong,
K T , do you thine my logic for this problem is right

I've got two iTunes accounts with apps under each - how can I reconcile them both under one account and one email address?

I've got two iTunes accounts with apps under each - how can I reconcile them both under one account and one email address?

You cannot.
Sorry.

Two iPhoto '08 Libraries, One External and One Internal...

Hello,
I have Two iPhoto '08 Libraries, One External and One Internal. I moved my original iPhoto library to my external HD and all was good. Now about six months later I am noticing that I have two libraries, the external one is 15.8 gigs and the internal one is 17.66 gigs. Can I merge these and how or are one of these an older version of the library that I could delete? Any assistance would be great!
Thanks,
Pete

Pete
Welcome to the Apple user discussion forums
are one of these an older version of the library that I could delete?
Sorry - these are user forums - not physic users forum
my best guess is that you never directed iPhoto to use the external library and that is is a back up of your old library and that your internal library is the complete library - but that is just a guess
To switch libraries and look at the launch iPhoto while depressing the option (alt) key and use the select library function - once you figure out what you have you can delete the old or or use iPhoto library manager - http://www.fatcatsoftware.com/iplm/ - to move photos between them
LN

HT4898 So, I have four different email accounts (two yahoo. one gmail and one mac ) - will these all sync after I move to iCloud?

i have four different email accounts (two yahoo, one gmail and one mac.com) - will these all sync once I move to the iCloud?

Welcome to the Apple community.
Only iCloud mail works with iCloud.
The syncing that occurs between a mail account on different devices, occurs because the account is an IMAP account. If you change or update your other accounts to IMAP accounts, they will behave the same way as your iCloud account.

I pre-ordered two iPhone's one 6 and one six plus.

I pre-ordered two iPhone's one 6 and one 6 plus. I ordered these on Sept 12th but it is saying I should receive the phones by Oct 21st. Why is this taking so long for me to receive the phone(s)? Several of my colleagues have already received their phones, just wandering why mine will still take another month?

Because there is a bigger demand then there is a supply.

Two SAP systems, same smartform, different print outputs

We have two SAP systems, because of the different business areas that our company has.
We develop a smartform with a custom style which has Gill Sans MT as default font. The smartform is printed directly into PDF format.
On system A on all environments it works fine and we transported it to system B.
On system B the output on PDF format comes in bold, all the characters are bold. This happens on all environments. On preview we don't see bold font but the spacing between characters is larger than expected (for example, a date is printed in two lines of a cell).
I've checked the settings on SE73 and they are the same on both systems.
I've also created a second style were I've taken out all bold settings. On system A, the smartform' style was changed to this new one. The changes were transported to system B, and still it prints all bold.

Thanks for the replys. I think this is an answer to both.
Checked SPAD and differences are:
1. output device LOCL:
System A:
- Device Type: ZSAPWIN
- Host Spool Access Method: F
System B:
- Device Type: SAPWIN
- Host Spool Access Method: G
2. Device Type:
System A:
- has two custom formats (none used on this specific smartform)

Interfacing two SAP systems for data collection

hi,
A scenario. i have two sap systems, one is 4.7 and another is ECC. based on one value in 4.7 i want to collect data from ecc. this has to happen thru XI. so shud i write a function module in ecc which takes as parameter the input value and picks data from database and exports the same and enable this function module as RFC ?
so then from XI this function module can be called with the required input parameter ? can anyone give me the code/steps or how to do this ?
thks

Hello,
why do you want to use XI? I would create a RFC-enabled FM in the ECC system and a RFC destination (transaction SM59) in the 4.7 system (calling the ECC system). Then create a report in the 4.7 system, getting the value and calling the RFC in the ECC system via:
CALL FUNCTION <RFC function> DESTINATION <RFC-destination>
Best regards
Stephan

Two SAP system in one host and one oracle software

Similar Messages

Maybe you are looking for