Two scrollbars - one project

Hi Everyone,
I have an odd issue I can't seem to figure out. Since this new update to Edge Animate, I am getting two scrollbars along the right side on my project. One seems to be from Edge Animate and one from the browser. I have my stage set to Overflow:auto like I always have. Has anyone else seen this? Anyone know what I should turn off or do to turn off the Edge Animate scrollbar?
Thanks
Randy

Change the overflow for the stage from "auto" to "visible". This will get rid of the Edge Animate created scrollbar.
hth,
Vivekuma

Similar Messages

Two Songs, One Project.

I have two songs in my imovie project. One is much louder than the other. Is there a way to fix this?

answer - no.
switch to final cut...

Can I edit one project on two computers with external drive and two copies of software?

I have two copies of premiere elements. One on IMac and one on Macbook. Video files on external drive. I want to be able to edit same project on both. I originally started the project on macbook but IMac doesn't see the exsisting project. Can I do this? thanks for the help

jazziegirl
Thanks for the follow up.
The matter of the sign in/trial version has happened to me from time to time with Premiere Elements (I worked with Windows). I supply
the requested information and that usually takes care of that message for a long while.
What is the status of the issue now with the MacBook Pro to iMac projects? Is that matter restricted to just one project from MacBook Pro to iMac?
If so, on this particular one, did you try the Project Archiver/Copy Project workflow in MacBook Pro?
As for the error message...I am not a Mac user, and consequently I am not sure I am interpreting the following correctly. But take a look to see if any of it applies
Have you looked at the permissions on your file?
USB tethering lost after installing iphone conf... | Apple Support Communities
iTunes 11.4 - All Things Apple | DSLReports Forums
"System extension cannot be used -- The system ... | VMware Communities
Please review and then let us know the outcome.
Thank you.
ATR

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

One project published with two stage sizes and shapes?

I’ve got one project that must be deployed in two different size & shape layouts, online running in a 760 x 700 box (almost square) and also on a wide screen kiosk running 1120 x 700 (wide rectangular). Maintaining two separate layouts has been time consuming and thus costly.
The compromise solution is to design a 1120 x 700 layout with the core functional elements placed on the right side of the stage, branding, supporting data, and eye candy filling the left. The idea is to crop the stage in the online version showing only the right most 760 x 700 content (all the core elements) while showing the complete stage for the kiosk. Branding for the online version is provided by the html container. I know how to use masks and edit the html to show only the left side of the stage but I’m not sure how to show only the right side of the stage since moving the mask does not change the (0,0) point of the stage.

As well as the reply from Anish about using your program on 2 computers, you need to ask in the program forum for how to best use the programs to do what you want
http://forums.adobe.com/community/premiere_elements/content
http://forums.adobe.com/community/premiere/content

Two - Progress Versions in One Project

Dear Experts,
I need to setup two progress versions for one project.
Progress Version 1 - for monitoring project progress and preparing S curve., measurement method is time propotional.
Progress Version 2 - for Result Analysis, measurement method is Estimation.
Please advise on the following....
a) Is it necessary to enter both plan and actual for RA POC (for Progress Version 2), or can I enter only the actual progress.
b) Can I maintain the POC only on the Billing Element (WBS Element) where the RA will be calculated (RA key attached WBS Element).
c) Can I use two different POC weighting for the two different progress version.
Looking forward to hearing from you.
Thanking you.
Best Regards,
Abdul.

Hi Jon,
I know I can right click and pulldown to "locate referenced files" and in both cases it says there are no referenced files which means that neither of these is in an Album or whatever.
Sorry, no, that means something completely different. It means that your master images are managed, they are imported into your Aperture Library and not stored outside your library. Perhaps you mixed this up with "Show in project", that you can use to find out the home project of an image in an album.
But is there a way to know what the Master is for these two?
No, both images are versions, referencing the same master. What you can find out, however, is which of the two is the most recent version.
To see this, you need to define a Meta Data preset in the Inspector Window. Open "Meta Data" in the Inspector Window. Select "Edit" in the selector. In the right panel navigate to Aperture -> Last Modified Date and check this item.
Now you will see the date when your your version was last modified. So you will be able to which of these two is the original version.
I know these sound confused and I am even after having pored over the full extent of the documentation.
Good for you! Keep it up, and do not only read but experiment with this information - try it out with a small experimental library.
Regards
Léonie

HT1583 When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls

Hi, please help me When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls help

Hi
My first two thoughts
• Shared to Media Browser - BUT as Large or HD - try Medium !
• audio from iTunes - use to go silent
- in iTunes
- Create a new PlayList with needed audio
- BURN this as a standard Audio-CD (.aiff) - NOT .mp3
- use the files on this CD in Your Movie project - I ALWAYS DO - and only use .aiff ever - never .mp3'
My notes on this:
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

How do I create two quizzes in one project

I have one project, which has 2 question pools of 10 & 12 questions. Trainees have to answer 3 & 3 respectively. Unfortunately, the quizzes are linked and mean that the whole project has to be completed before quiz results are published allowing trainees to 'loop' back if having failed. I need the quizzes separate, to allow trainees to 'loop' back and complete only the part of the project that they have failed the confirmation for. I hope there is an easy work around?
Chris

It is a SCORM rule that each file can have only one quiz, and can report only results of one quiz.
If you want only to show intermediate score after the first sequence of questions, you can use the quizzing system variables to create a custom score slide. This post explains to do that, but not for random question slides; some quizzing system variables like cpQuizInfoPointsscored are updated after each question.
Intermediate Score Slides - Captivate blog

How do i work on one project and bounce between two computers

I have one project that I would like to work between my mac book pro and my mac pro and i cannot seem to find an answer to this question

What Tom said…and just to add: if you have any custom effects, pay attention to "Note" in the first section of this kb doc. (Speaking from experience, you can avoid a lot of stress by remembering to do that – especially if you're working on a job on someone else's system.)
Russ

I'm using ver. 3.4.5. After having a problem importing some photo's I now have all my library showing up in the one project. I'm worried about just deleting this project in total. Any help would be appreciated

After importing a small group of photo's I noticed that aperture didn't create a project for them as usual. The only place I could see them was in last imported. While last importwas open I selected the photo's and told aperture to creat a new project using the selected one's. I named the project with the date using all cap's so I would know which one it was. What I have now is my whole library showing up in this one project. If I import more pictures It does two things. A new project is created as it normally does. These new thumbnails also show up in the problem project. I tested to see what would happen if I deleted one old picture while the problem project was open. It went to the trash. It was also removed from its original project. If I ignore this what seems to happen when importing at this time is that a new project is created that you can open, it acts normal. The file only contains the correct amount pictures. If I then go to the problem project the thrumbnails show here also.
About 6 mos ago I switch to Aperture from iphoto. I never combined the two libraries. I have around twelve thousand photo's. December 1st I backed up my imac with Time Machine. I don't want to back up again until I get this problem in check.
Thanks for any help, Dale

Hi Andy,
I'm using Mac OSX 10.7.5
No the one with the caps seems to be working normally.This project with the caps now has four files. Originally I created it with about fifteen. I deleted eleven of them and edited the remaining four. The four files each have one version and its original. It wasn't until after I completed this work that I noticed the privious project when opened and scrolled had the entire library in it.
The test I did went like this. With the problem opened I deleted one file that I new existed prior to this problem. I than opened that project that I new it was from to see if it got deleted and found it gone and moved to trash. I think that tells me that if I delete all the files in the problem project I'll be in trouble. I also have inported to projects each with one file that I edited. They are working fine. I took a look in the problem project and this last
two imports show the thumdnails in it.
Currently on my Hard Drive I have 275 GB free space. My photo's take up 138 GB. As I said on Dec. 1st I backed up the system using time machine. So all of Dec. and part of Jan. inports won't be on it. I could work around the problem project and move those file to a safe place. I think it best not to back up the system with Time Machine until I'm confident the Aperture is runing properly. I'm happy that I control these system backups manually.
I'll need to find out how to copy the Aperture library to another place. I'm sure I can poke around and fined out the process.
Thanks Andy for the come back!

Copying a single file from one project to another????

Hello,
New to Mac from a PC, tried search with no results. I have a single image I would like to display in 2 separate projects in Aperture. (As I will be writing to a disc and print later). How do I copy the image from Project A to Project B, making is available to both??? Thanks in advance!

There are two different ways to do this.
The first way is literally exactly what you are asking for but may not be what you really want. You can copy the image (and corresponding master) by holding down the option key while dragging the image from one project to the other - make sure the drop target is the actual little yellow project box and not something inside the project box. When you do this there will be two completely separate copies that have nothing to do with each other. If you make an adjustment to one the other will not change, if you delete one master the other will still be there.
The second way may be what you actually want - if you create any type of album within or even outside of a project you can drag any images from any project into it - no copies are made but the image will "show up" in that album no matter what project it happens to live in. This is usually a better way to group images together from multiple projects no matter what the purpose.
Here are some more details:
[Aperture organization|http://photo.rwboyer.com/2008/07/apple-aperture-21-organization>
RB

How can I combine to different projects into one project?

I would like to combine various projets into one project is the possible.

Hello Tom,
I have tried to copy and paste the two projects, both in the project library and in the timeline. In the timeline the paste option is not highlighted and paste does not work. In the project library I highlighted the project and copied the project, but I was unable to paste into the other project. Is this done in the project library? The paste option is hightlight but each time I paste it does not work.
Thanks for your help

OSB : How can we copy actions from one project folder to other projects?

How can we copy actions from one project folder to other projects in OSB?
For eg:
I have a service call out action in Project1/proxySer1
I want to copy this to Project2/proxySer2.
Espicially, in our case error handling callout is common to all of our projects and we should be able to copy from one to another.
Edited by: user10367892 on Aug 20, 2009 12:28 PM

Thank you for the reply.
It was my fault. I was on two different servers, while i was doing this and so didn't work. But copy /past action works as you suggested.
Can I select multiple actions from one stage and paste to different proxy service? I have too many options to copy/paste and hence I have this question.
Is there any other way of copying all selected actions in one stage to another, but not the complete stage itselft?

IDVD burning one project on multiple macs? where are project contents?

How do I burn one project on multiple macs? I have a idvd project I created in keynote, added music to it in Garageband, exported to quicktime, and now is in iDVD burning just fine. However I have tons of these dvd's to make, I would like to put all my mac's to work.
last night i tried to share the file, and it is just an alias when i drag it over from the macbook it was created on to my imac. the file says it is in use and locked, since the macbook that created it is burning it. If I wanted to brun on the imac, I had to wait until the macbook was done.
is there a way around this? What if I copied all files I used to make the idvd project to my imac or any computer i wanted to burn on? woudl it hen allow two macs to be burning the same project?
I figured I could do this just like on my PC, drag the file over and voila...no such luck, its like if i had dragged a shortcut over to another pc...if the first one is using the file, its locked. Basically how do i get to the actual contents of the project, so I can also bring them over and hopefully it will allow me to burn on multiple macs at the same time?
my next solution if that didn't work was to start copying dvd's using popcorn on the other macs while the macbook continues burning through idvd.
Any opinions on how i can duplicate a dvd fast...need alot of copies!

Also as to where the files are.
I-DVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically
configured by your system administrator for this purpose. (This is not the same as
having a server networked into your computer.)

How can I pass variables from one project to another using Javascript?

Hi all, I am trying to do this: let learners take one course and finish a quiz. Then based on their quiz scores, they will be sent to other differenct courses.
However, I wish keep track on their previous quiz scores as well as many other variables.
I found this nice widge of upload/download variables by CPguru (http://www.cpguru.com/2011/05/18/save-and-load-data-widget-for-adobe-captivate-4-and-adobe -captivate-5/). However, this widget works by storing variables from one project in local computer and then upload it to another project.
My targeted learners may not always use the same computer though, so using this widget seems not work.
All these courses resided in a local-made LMS which I don't have access to their code. Therefore, passing variables to PHP html files seems not work.
Based on my limited programing knowledge, I assume that using Javascript to pass variables may be the only possible way.
Can someone instruct me how to do this?
Thank you very much.

If you create two MIDlet in a midlet suite, it will display as you mentioned means you can't change the display style.

Two scrollbars - one project

Similar Messages

Maybe you are looking for