Two segregated wlans both to connect to wan

I have a similar question to https://supportforums.cisco.com/thread/2169935 but not exactly the same.
1) In our office we have the requirment to offer access to the internet (WAN) over a public accessable WLAN. The traffic should be restricted to WAN only none of the LAN should be accessible.
2) We maintain our own DCHP server offering adresses in 172.16.1.0/24 or servers are in 172.16.0.0/24 but both are in a supernet 172.16.0.0/23.
In order to restrict traffic from the public wlan to lan I created two VLans ID1 and ID9:
and
and assigned the wlans, thusly
The problem with this setup is that none of the wlan members can access the WAN
Routing from WLAN to WAN should not be restricted by this setup, should it? Or do have to rout explicitly traffic from WLAN to WAN?
Our DHCP server is setup to route over gateway 172.16.0.1 wich can be pinged formidably. Traffic connected to a L2 switch to the RV180 is route to WAN flawless.

Johannes,
What model APs are you using? Please re-attach the images as well.
- Marty

Similar Messages

My ipad will connect to the router but will not connect to my network. I have two PC's both will connect to the network. Last night I connected my ipad as a remote for my Apple TV, after that i could not connect to the internet, don't know it that caused

My

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

ITunes Automatically Change EQ Setting Based On Which Airport Express Streaming? I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different

I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?

I'm in the same boat. I have a 6 zone amplifier running with 6 airport expresses to different rooms inside and outside the house. Each has it's own acoustic characteristics. I'd really love to be able to set each airport to equalize based on my SPL frequency sweep I did for each room.
Setting the eq in itunes won't do it as that is global plus I have many more sources for auiod other than itunes that use the AEs directly.

HT4262 I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location but cannot connect to his wifi network. How do I delet one network so I can connect to my second network?

I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location and cannot connect to this wifi network. How do I delet one network so I can connect to my second network?

Just go to the wireless network preferences and empty out all the stored wireless networks.. then scan and connect to the local wireless.
Select them and tap the - button below it.
Once they are emptied out.. it might be good to reboot the computer with the remember networks unchecked.
Start with a clean slate.

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
I have chek the DNS and nslookup all are correct but this is generate error.
Is this possible Mumbai location join with this Domain(CAPLDC)???
One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
Pls find the error message below and also find the attachment.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The domain name "capldc" might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
The following domain controllers were identified by the query:
capldcserver.capldc
win-dyfq2poc88q.capldc
However no domain controllers could be contacted.
Common causes of this error include:
- Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
- Domain controllers registered in DNS are not connected to the network or are not running.
Pankaj Kumar

Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
Please refer to the articles below to fix your current issue:
http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? No firewall involved.

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? There is no firewall inbetween the two connections, as this is all on our internal network.
Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
Thanks.

If anyone ever comes across this and has the same issue, here's what I did to fix it:
My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only". (I would've used N but one of the NICs in my house is too old to support it.) Anyway, after making this change, Facetime works fine on the phone. Hope this helps someone else!

We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details.

We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details manually.
I have done resets on off and nothing? HELP!

What is that and how. I have 3 airports all configured identically and connected to one router via ethernet!
A power cycle is powering down for ~ 1 minute and powering back up.

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

Viewing ink on 2 different printers on my laptop when both are connected wirelessly

I have 2 different HP printers (let's call one a 4500 and one a 6500} in different, far-off locations in my home. Both are connected wirelessly to my laptop which runs Windows 7 (64 bit). I have no problem changing from one printer to another on my laptop; each printer will work fine wirelessly. However, I would like to utilize HP's "Solution Center" software for BOTH printers on my laptop, instead of the ONE printer (the 4500) that is available to me now. Any ideas?

If you have the full feature software installed for each printer (get the latest software for your printer from the "Support & Drivers" link at the top of this page) then in Solution Center you should be able to choose between the two.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Going online with two macs kills my internet connection!

Here is my situation. I have two macs an iMac and a MacBook.
I use Earthlink, have a BritePort modem and "HAD" Linksys wireless router. Everything was fine. No problems. I was able to get online with the two computers with ease, then I had problems connecting last week. If I went directly through the modem to my MacBook I can connect, but I would lose the internet intermittently throughout the day if i didn't.
Earthlink said everything was fine as far as signal reaching my modem. So I bought an Airport Extreme thinking it was the router. Both Macs connected wirelessly on their own but then I'd lose internet whenever BOTH tried to get online at the same time.
I would be working fine on my MacBook, but once my wife tries to get online with the iMac, it kicks us both off! If she's online on the iMac and I try to get online on the MacBook it kicks us off! This is what was happening with the Linksys too! I reconnected it, and it was only when both Macs accessed the internet that we both lost (or were fighting for) connection.
What is going on?

HungryWriter wrote:
I would be working fine on my MacBook, but once my wife tries to get online with the iMac, it kicks us both off! If she's online on the iMac and I try to get online on the MacBook it kicks us off!
Welcome to Apple's discussion groups.
What's the model number of your BritePort modem? When you examine the configuration of your AirPort Extreme using AirPort Utility, in the Internet panel, Internet Connection tab, what are the settings for "Connect Using" and "Connection Sharing"?

I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your mac using account ***

I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your computer or apple tv using account ***
Does anybody have suggestions as to why this is the case?

Understanding Home Sharing - Support - Apple
Hope this helps.

Macbook Pro 10.7.5 internet will not work. HELP!!! Ethernet and WIFI both say connected but still no internet.

I have a macbok pro running 10.7.5. My internet has always worked on it but I decided to try changing my router set up - the set up didn't work so I reverted back to the original setup that had previously worked.
Now, I have an Imac running tiger - I can connect to the internet via WIFI or Built In Ethernet with no problem.
When I try to connect to the internet on the Macbook Pro running osx 10.7.5 my internet will not work
Safari Says (You are not connected to the internet) and Google Chrome says (Page is Unavailbe) and lists some trouble shooting options that I tried.
When I go to System prefrences > Network my WIFI and Ethernet both say "Connected" and have a green light next to them.
I have tryed deleting the connections and starting new ones and I have even tried deleting the Location and starting a new one.
Nothing works - no matter what I do, even know the WIFI or ETHERNET says Connected, the internet will not work on the Macbook Pro.
The Internet works fine on my Imac and I have tried everything such as swaping cables but there doesn't seem to be a problem with my internet
or with my router - it all works fine with my Imac running Tiger.
Can anyone help me get my internet working on my Macbook Pro again? Any ideas?

Hello ASGR.SYS amd WahWar,
I tried both of your suggestions and neither of them worked.
ASGR SYS - When I tried it your way i got a message saying that the that the diagnostic couldn't repair the problem. It shows the thw WIFI, WIFI SETTINGS, NETWORK SETTINGS, ISP, all turn green. But the Internet and Sever stay red. The thing is, there is nothing wrong with my internet connection as I can connect to the internet on my Imac running tiger, both through ethernet and wireless. When I go to System Prefrences and Ntwork the WIFI and ETHERNET both say "Connected" even know I can't veiw any websites.suggestion
When I tried WAHWAR's suggestion I get a message that says cannot connect to the WIFI network and then it lists your typical trouble shooting tips. Like Make sure you entered the right password and make sure you are in range of the wireless network
Again, just to confoirm - My internet connection is working fne both the WIFI and the Ethernet. When I use it on my IMAC running tiger, everything connects as it should and it works perfectly. But when I try to connect with the MacBook Pro, Even know the connections in the Network settings window show up as "connected" the MacBook still seems to think that my internet connection isn't working at all.
I have tried creating new connections, creating new locations, and I have even gone as far to reset my router and start completely from scratch. The result so far has been the same - the IMAC running tiger will connect - my blackberry and iphone will connect - but the macbook pro running lion will not connect..
I'd apprechiate any other suggestions

Imessage on my iMac has created two iMessage account both asking for Apple ID....and no option to - (delete) one of the two duplicate accounts....how can I delete one of them it just bothers me due to sign in issues....goes inactive when signed in on othe

imessage on my iMac has created two iMessage account both asking for Apple ID....and no option to - (delete) one of the two duplicate accounts....how can I delete one of them it just bothers me due to sign in issues....when signed into one it signs out the other and goes inactive I just wanted to delete one of them so this issue doesn't happen....why doesn't it give the option to delete ONLY these two accounts

1. Don't confuse "Apple ID" with iTunes Account ID. You can have many Apple IDs but only one iTunes account active at a time.
2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
3. You can't merge the accounts - they remain separate. Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME and visa versa.
4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to.

Two segregated wlans both to connect to wan

Similar Messages

Maybe you are looking for