Two separate L2L tunnels between same two ASA

I have a large MPLS fully meshed network with two main locations, both of which have an ASA with internet access as well as the MPLS access. I need to be able to provide a backup connection between the two main locations in the event one of the MPLS links to one or the other goes down.
I am considering using a L2L IPSEC tunnel between the two ASA's but the interesting traffic for the tunnel is different depending on which of the links is down and there fore I would need two different tunnels. I have my servers and remote desktop servers at one of the main sites and the other main site has another organization attached to it externally that the servers must be able to access.
Is there a way of creating two separate L2L tunnels between the two ASA's? Could I perhaps assign two public IP addresses to each of the ASA's and then create the tunnels between different endpoints on each ASA?
Does anyone have another possible solution to the problem?
Gene

You should be able to do what you want using IP SLA. Please see this excellent blog post which documents one way to accomplish it.
Hope this helps.

Similar Messages

Can i use ichat between two separate macs on the same mobile me account?

Can i use ichat over two separate macs on the same mobile me account?
I have an imac at home and may be getting a macbook for work. Can i use my mobile me account to chat between the two macs or would i need a mobile me account per mac??

Hi,
No.
You need two names that can login into AIM.
In iChat you can use the Get an iChat Account which shows after you use the Plus Button in Accounts.
This will give you a free @mac.com Name
AIM Names are also free.
9:31 PM Saturday; July 4, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

Can you install CC on two separate computers under the same A/C

Can you install CC on two separate computers under the same A/C

yes, adobe single user licenses allow up to two concurrent installation/activations.

Can I use two separate computers with the same adobe ID. I want to update my kobo from either unit

Can I use two separate computers with the same adobe ID. I want to update my kobo from either unit

I doubt it is possible to run two instances of iTunes on the computer at the same time. To do so would require two users to be signed in and running iTunes under each user.
The better solution would be to either clean up and merge the two libraries or have iTunes running on a second computer.

How can I sync two separate iPhones on the same computer?

How can I sync two separate iPhones on the same computer?

How to use multiple iPods, iPads, or iPhones with one computer

Share an itunes between two separate accounts on the same macbook pro

My Partner and I share a macbook pro - we both have indidiual accounts.
Our itunes music is all showing on the iTunes in his account.
However, I log him out and then log into mine the iTunes is empty....
Is there a way that we can share the iTunes and the music purchased between our two accounts on our macbook without having to buy all the music again??
I am not very switched on with the syncing business and the only way I can see around it is to put all the music on a hard drive and then transfer it back onto my iTunes accounts - but I would consider that that method is a little outdated now?

To give other users read-only access to your library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
If you want to give full read/write access to more than one user, see the support article linked below.
iTunes: How to share music between different accounts on a single computer

Can a mac mini be set up to run two separate users at the same time?

I work for a middle school and we need to purchase 20 computers that will just be used to run internet apps. Though we have all Macs, we don't have a big budget and for this one use only, we are condsidering purchasing inexpensive HP all-in-ones for about $450 each. However, I was wondering if a Mac Mini can be first set up with 2 partitions, install the OS on both partitions, then run two different users, with two separate monitors and keyboards, at the same time? This way, instead of purchasing 20 Windows computers, we could purchase 10 Mac Mini's (and displays) and save money, and still be supporting just one OS throughout the campus.

If you setup a server, as in the Mac OS X Server Installation, pages 23ff show configurations, you can have multiple users, but they must all have computers. Some installations can be done with dumb terminals but that is not what you seem to want. Unix machines do have a multiple simultaneous user capability but you still have to have a computer for each user, again, not what you seem to want to do. Right now there are two other users logged in on my Sun workstation on the desk behind me...they are logged in because I permit them to do so.
And last night for an experiment I connected my iMac and MBP by ethernet wire, logged in on the iMac, then logged in on the MBP and from there on the iMac...but I set up the network to permit that and then disabled it again. You can create security holes doing things like this.
As dwb points out switching from Apple to PC equipment is a false economy that lures in administrators. In our county school system we had a superintendent who hired a good friend...who had PC-industry ties. Decided to remove all Apple equipment from the elementary schools and switch to PCs. It wasn't long before they ended up going on a 4-year cycle of "refreshing" the equipment, i.e., completely replacing all hardware in every school on a four year cycle. Since my wife was a Media Specialist, aka librarian, and responsible for technology in her school, every four years she had to develop a complete school map of where each teacher wanted the computers in their classrooms, complicated by where the technicians predetermined the locations of the network wire drops, of course. then teachers get shuffled over the summer and all the plans are for naught.
Anyway, there really isn't a solution to your problem except to buy a large number of computers and let each student use one and have them networked to a server, print server, printers, etc. This is not inexpensive and cutting corners will only cause headaches for you.

Two Separate Album of the Same Purchased Album

I completed an album at a different time using my new Mac, and it comes up as two separate albums on my iPhone. Any ideas why and how I can fix it?

Thanks for the suggestion, Chris.
Same issue, new question - don't ask me why I did this, but while both Photoshop and the now corrupted file were open, I changed the name of the folder containing the file, then continued to save the open version of the file without first closing it and reopening it from the newly renamed folder. Could this have caused both files in that folder to become corrupted in different ways? The other file that gives me the "file is empty" error was not open at the time, but it was in that folder. I'm thinking maybe by changing the path to the files while Photoshop was running, that could have triggered this. ?? I have 3 1TB internal drives raided to read as 1 drive, so I'm really hoping that one of these disks is not dying on me as you suggested. I was also backing up an external drive using BackBlaze when this all occurred - any possible connection? How can I find out if one of my three raided drives (and which one) might be going bad?
Thanks!!

Two separate calls using the same account

I just tested this to see what happened and I may be late to the party, but I didn't expect it to work.Logged in using Account 1 on my Mac and called account 2 on my iPhone. All well and good.Then I asked someone else to log into account 1 on THEIR Mac and call account 3 on their phone.It worked. Two separate calls to two diffent endpoints, at the same time, from the same account.Strange and also useful

Hi and welcome to the Skype Community,
Yes, you can have multiple simultaneous calls from one account. It's a legacy of the peer-to-peer heritage of how Skype was built to allow for that. Good to hear you find it as useful as we do.

Two separate videos in the same frame, and large format video.

Hello.
I'm very new to this program.
I've only done basic editing, such as this video where I took scenes from 3 different computer game replays and spliced them together.
I own an eyefinity system (triple monitor) and record replays from games.
The replays are half-size, but still 3008x600 pixels. Here's a sample of one reduced to fit in a 1920 pixel width.
I want to get two of these in to one 16:10 or 16:9 frame.
So two questions:
1. Each time I try importing these avi's in to my Premier Project, they get cropped. The largest i've been able to make the sequence is 1280x1080. (sequence preset "DVCPROHD")
I assume i'm missing something obvious...or there's a limitation of how many pixels wide Premier can deal with. If it's a width issue...I can resize the avi's first. Although I haven't seen a way to resize in Media Encoder without the upper and lower black bars...which I believe will create a problem. (see "Here's a sample" video above)
2. I want to put two of these long rectangular replays in the same frame. Not overlapping, but one at the top of the frame...and the other at the bottom. Is this possible?
The only thing I could find that came close was "multi-camera monitor". I was unable to figure that out. Is that what I have to learn about...in order to do this?
Thanks very much.

How do I choose the right sequence settings?
Picture-in-picture (PIP) and split screen
Multi-camera sequences are for real time switching between different sources.
Multi‑camera sequences

Two separate versions of the same file corrupted in different ways...

I was working on a Photoshop CS4 file last night that was created in CS4 and has only been opened on this machine in CS4. I saved the file and closed Photoshop. When I open the file today, all my layers are gone, flattened into one Background layer, and the image looks like colored TV static. On top of that, the separate, older version of this file with a different name (created earlier in the week on the same machine in the same CS4) will not open at all - I get the error message, "Could not complete your request because the file is empty" and the file size has mysteriously shrunk to 76 KB from 20+ MB. What happened?! I'm guessing these files are corrupted beyond recovery, but why and how did this happen? Has anyone had this or a similar problem? I want to know how to prevent this from happening in the future. Please help! Thank you. =)

Thanks for the suggestion, Chris.
Same issue, new question - don't ask me why I did this, but while both Photoshop and the now corrupted file were open, I changed the name of the folder containing the file, then continued to save the open version of the file without first closing it and reopening it from the newly renamed folder. Could this have caused both files in that folder to become corrupted in different ways? The other file that gives me the "file is empty" error was not open at the time, but it was in that folder. I'm thinking maybe by changing the path to the files while Photoshop was running, that could have triggered this. ?? I have 3 1TB internal drives raided to read as 1 drive, so I'm really hoping that one of these disks is not dying on me as you suggested. I was also backing up an external drive using BackBlaze when this all occurred - any possible connection? How can I find out if one of my three raided drives (and which one) might be going bad?
Thanks!!

Redirect to two separate pages in the same cfform

I'm a bit of a novice at this.Hoping someone can guide me on how to accomplish this. I have a simple selection list (below). If they user chooses the selection in red I want it to redirect them to a page other than the one in the cfform tag, but I can't figure out how to segregate the options within the cfform from the same list. Thanks in advance.
<cfform action="index2.cfm" method="POST">
<table align="center" width="475" border="0" cellpadding="1" cellspacing="0">
<tbody>
<tr>
<td><span class="label">Select Version:</span> </td>
<td>
<cfselect name = "UPVersion">
   <option value=""></option>
   <option value="66SP1">6.6 SP1x</option>
   <option value="66SP2">6.6 SP2x</option>
<option value="701">7.0.1x</option>
</cfselect>
</td>
</tr>
<input type="hidden" name="gosearch" value="gosearch">
<input type="hidden" name="Rows" value="50">
<tr>
<td colspan="3" align="center"><input type="submit" name="Submit" value="[ search ]"> <input type="reset" name="reset" value="[ clear ]"></td>
</tr>
</tbody>
</table>
</cfform>

The sample code I provided is reduced down to show a concept of how I solved the multiple processing based upon user selection criteria.
Looping throught the FORM.FIELDNAMES was provided as an easy way to capture the fieldnames and their values.
Process1,cfm and Process2.cfm were used to show 2 different processing pages. They do not exist and are examples.
I use this logic on many pages and it works well.
You are correct that you need to further refine the code using the javascript or URL to pass the form variables.
<CFLOOP list="#Form.FieldNames#" index="i">
     <CFIF CurrentRow EQ 1>
                                      <CFSET z = "?#i# & "=" & #Evaluate("Form." & "#i#")#">
     <CFElSE>
                                      <CFSET z = #z# &", " & "#i# & "=" & #Evaluate("Form." & "#i#")#">
     </CFIF>
</CFLOOP>
<CFIF #Form.X# EQ 1>
     <CFLOCATION Url = "process1.cfm#z#">
<CFELSE>
     <CFLOCATION Url = "process2.cfm#z#">
</CFIF>
You could also process both functions on one page.
<CFIF IsDefined("Form.UPVersion") and #Form.UPVersion# EQ "7.0.1x">
     Do special processing
<CFELSE>
     Do Normal Processing
</CFIF>

Can I setup two Apple TVs on two separate tvs in the same house?

I have one Apple TV set up and received a second for Christmas. Can I use the second on another tv without any issues?

Welcome to the Apple Community Just Nerdy Enough.
Yes (we have 5).

I have two airport express base stations that I want to configure on two separate sets of speakers in two separate rooms. How do I do this? Airport Utility only seems to scan one express at a time.

I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

Two separate L2L tunnels between same two ASA

Similar Messages

Maybe you are looking for