Two separate stereos, two separate airports, one song

With two separate stereos plugged into their own airports, am I able to use them so I can listen to the same music but without hard wiring one of the airports through my router? Is it something I have to set up via AirPlay somehow?? Thanks:)

iTunes: How to share music between different accounts on a single computer
http://docs.info.apple.com/article.html?artnum=93195

Similar Messages

  • How do I fix syncing issues between my iTouch and iTunes? My iTouch shows I have two copies of one song but on iTunes it shows I have one copy. I only purchased one copy too so where did the second copy come from?

    Yesterday I purchased a few albums and CDs from iTunes to my iTouch. After charging my iTouch, I noticed some of the songs weren't there. So I checked my iTunes and they were still downloading so I synced them up to each other. For the 1st hour, there was only one copy of the song. Later on, when I hooked up my iTouch to see if my info corresponded to iTunes, I saw that there was additional copies of the same song on a few albums and some copies of individual songs. I didn't purchase them twice either. Now I have two copies on my iTouch but not my iTunes so I can't delete the additional copy.

    Right now, I tried deleting all of the music and resyncing it from my iTunes directly to my iTouch. Hopefully this will solve the problem.

  • Hi. I am having an issue with music on my Ipod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one wi

    Hi. I am having an issue with music on my IPod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one with only Islands on the Coast, and the other having Islands on the Coast with 3 other songs. If I delete the album with only one song from my IPod, it deletes the song from the other "album" as well. If I go to "All Songs" by Band of Horses, it only shows one Islands on the Coast, so it is not a duplicate issue. Also, in Itunes, it only shows one album. I just recently updated to iOS5 on my 4th Gen IPod Touch, if that helps.

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • How do I make one song into two separate songs?

    I have a song on my iTunes that I want to to split into two different songs, each with different names, and that can be played right after each other in the album. Is there an easy way to split up this song into two different parts, and if so, how? Thanks!

    ccreatvwhit wrote:
    How do I fade one song into another after only 1 minute or so of playing?
    That is a common capability of DJ programs, but cannot be done with iTunes.

  • WinXP with two users - can we have two separate iTunes, one for each user?

    Question:  On my Dell WinXPPro SP3 desktop with two users (myself and my wife), can each user have a separate iTunes - so what each of us does with iTunes has no effect on the other?
    Details:  Yesterday, June 29 2012, I bought a new iPad 3 with WiFi only, my first Apple product.  My #1 motive for buying it is to copy movie files (avi, m4v, mp4, etc.) from my WinXP setup (PC plus hard drive) to my new iPad to watch the movies in bed on the new iPad. I understand that I shall need to install iTunes on both the iPad and the PC in order to move or copy the existing movies from the PC side to the iPad.  (I also understand that I won't be able to use iCloud because iCloud will not run on WinXP, only Vista and Win7.)  [By the way, if iTunes will NOT help me do what I want to do, please let me know.  But that is not my question.]
    I am only one of two users on the PC.  My wife is the second user on the PC.  She already installed iTunes on the PC for her own use.  She is an avid iTunes user.   Most of the time, she does not use this PC.  She has her own WinXPPro SP3 Dell laptop, which is what she uses 99% of the time.  She has also had an iPod for some time, hence her use of iTunes.  And now, for the last two weeks, she also has a new iPhone 4S and her own iPad.  So her use of iTunes will grow.  The important point is the following - whatever I do on my side, I do not want to interfere with or disrupt her use of iTunes.  Not even for a second.
    So, can I install or re-install or somehow set up iTunes on MY user on the PC so that it does not in any way use or affect her iTunes?  If the answer is "yes", please give me a step-by-step and list all details.  Is there a YouTube that shows this specifically?  
    More details:  Right now, in C:\Program Files, before I have tried to install anything myself, there are already folders for Apple Software Update, iPod and iTunes, which derive from my wife's installations of these Apple programs some time ago.  I have just now run the Apple Software Updater, which first updated itself on this PC to version 2.1.3.127 and then updated her iTunes on this PC to version 10.6.3.25.  (As a result, the following processes/services are now running, which normally don't run when I am the user: 
      C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
      C:\Program Files\iPod\bin\iPodService.exe
      C:\Program Files\iTunes\iTunesHelper.exe
    Also, the following processes will launch the next time I reboot this PC (which normally don't launch when I am the user):
      C:\Program Files\Common Files\Apple\Apple Application Support\APSDaemon.exe
      C:\Program Files\iTunes\iTunesHelper.exe )
    My wife says her iTunes is NOT set for Family Share.  (That sounds correct to me, for now and forever.)
    Summary:  So, how do I install iTunes for myself (for the first time) for my user on this PC so it does not - even for a second - interfere or affect my wife's use of her iTunes on all of her devices?
    Thanks !!!

    Mr. Wiclee - thanks for the link.
    When I said I had not "installed" iTunes on my iPad, I suppose I meant I have not yet signed in to iTunes, ever.  I suppose when I sign in to iTunes the first time on my new iPad, I will be required to create a new iTunes account?  Then refer to such new iTunes account when I launch iTunes for the first time on my PC as myself?  Or will I still need to use Method Three in your link? 
    The crucial thing is this - when I turn on iTunes on the PC for the first time with me as User, I do NOT want it to connect to my wife's iTunes account.  On my PC, I would want iTunes to ask me who I am, so I can then sign in with my new iTunes account that I had just created on my iPad.  How can I be sure to accomplish this goal?
    In my PC, if I look at Documents and Settings and compare the two folders for we two different users, one for me and one for my wife, I can see that my wife's has Application Data and Local Settings for her various Apple programs.  However, so do I in my User even though I have not yet installed any Apple programs on my side.  I am concerned that when I finall launch iTunes when I am user, it will open up in my wife's iTunes account, which I truly want to avoid.
    Thanks.  Please advise.

  • How do I set up two libraries on one pc so that we have two separate libraries for each iPhone?

    How do I set up two libraries on one pc so that we have two separate libraries for each iPhone?

    Launch it with the Shift key held down, or create a second Windows user account.
    (60390)

  • How to export multiple separate tracks as one song from Logic to iTunes?

    I know how to export the separate tracks that i have recorded, but i want to be able to save all of the tracks into one song, in other words, i want to be able to take my recording from logic 8 and export the entire thing, not just separate tracks, into a file that iTunes can read. Any help/suggestions?

    Select "Bounce" (upper right part of Logic arrange window) and make sure MP3 is check under "Destination". This will cause all tracks to be written to a single MP3 stereo file. However, if you have any tracks muted they will not be included in the bounce. Also, make sure no track is "Solo" else you will only get THAT track.
    I am assuming that you have mixed all the tracks and done any "mastering".
    Once the MP3 file is generated just drag it into iTunes, right click on the song, and then select Get Info and the "Info" tab to assign Artist/Album/etc.
    It is very easy......

  • I am very disappointed with iTunes.  I have 1200 songs and I can't play them.  I try to play them and before one song finish a song starts playing. This then results in hearing two songs at the same time. I will like to know if you can fix this. I feel li

    I am very disappointed with iTunes.  I have 1200 songs and I can’t play them.  I try to play them and before one song finisha song starts playing. This then results in hearing two songs at the same time.I will like to know if you can fix this. I feel like listening with the iTunesplayer is useless.

    I don't know man I too hope apple will do something this new I-tunes blow my top lost my whole tune!!!

  • Here we go. I have all Ke$ha's albums but there's a problem. There's ONE song includes in TWO albums at the same time. I want to have a full albums but I don't want to have a several identical songs.

    There's TWO albums of Ke$ha:
    One of them is studio album "Warrior" with song "Die Young" BUT there's a EP "Deconstructed" with the same song. What can I do to make one song be included in two albums?
    Sorry for SO BAD english. I'm from Russia and my english is absolutely terrible

    Are you trying to save money or space?
    You can make a copy of a song and give it different properties.
    You cannot make iTunes use the same audio data for two different tracks in two different albums.
    tt2

  • Some Albums on iTunes separate into one album for each song on iPod

    Some of my albums, imported from CD's, show up properly on iTunes. After the sync, each song in the album shows up on the iPod Touch as a separate album with the one song. All the songs on the album are "ticked" in the iTunes list before the sync.

    See http://samsoft.org.uk/iTunes/grouping.asp
    tt2

  • Is it possible to have two iTunes programs on one computer to be used by two different users without songs, photos etc. being commingled?

    is it possible to have two iTunes programs on one computer to be used by two different users without songs, photos etc. being commingled?

    Yes.  See Here...
    How to Use Multiple iDevices with One Computer
    Create a New User Account for each User. Then Each user will have their own iTunes library..
    Also... Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha

  • I have two albums from the same Artist, I want to consolidate them, both downloaded via iTunes. I have Ellie Goulding's album and I downloaded one song from her EP but its on the album. I want the song to be part of the album so I can listen to the album.

    So basically I want what it says in the title. I want to be able to listen to the full album as a continuous loop without it skipping the one song I downloaded from the EP. I can't delete then download the song from the album (I tried and it wont let me).

    Generally setting a common Album title and Album Artist will fix things.
    For deeper problems see Grouping tracks into albums.
    tt2

  • Transferring one song between two iTune Libraries

    How do I transfer just ONE song from the iTunes Library to an iTunes Library on another computer. (The song is not a purchased one from iTunes Store if that matters any).
    I was able to do this very simply a few weeks ago but can 't remember how I accomplished it.

    musichouse wrote:
    The iTunes Library I am attempting to send songs to is on an external hd. Does that have anything to do with this?
    no, both my iTunes libraries live on external HDs. transferring content between them works like a charm.
    try the suggestions in this support article.
    however, what Niel suggested will also work just fine.
    JGG

  • Can two computers share one iTunes library?

    I am trying to map out a new plan for how we store and play music via iTunes at home. Currently, our music is stored on a windows PC and played via iTunes and an airport express.  I recently bought a new macbook and am considering an airport extreme with the hope that I can store the music on a hard drive attached to the airport extreme and play music from either computer.  Can the two computers share one library? I already have home sharing turned on and can access my library from the macbook, but if possible, I would prefer having the hard drive separate of the desktop.  Any reason this won't work?
    Thanks!
    -JDJ

    Ziatron wrote:
    Yes, two computers can share the same library.
    I periodically copy my iTunes library from my Mac Pro to the Mac Mini.
    They aren't using a single library. Each computer is using its own copy and you have two sets of library files.  It can certainly be done that way but if between copy sessions you edit a bit of each library then it is a bit of a muddle trying to make sure your versions are synchronized with each other.  For example, ratings are stored only in the .itl file, so if you rate a song on your second computer it will get lost the next time you copy over from your first.

  • How do i get two ipods on one computer

    Ok How can I share songs with two ipods on one computer!!! Help PLEASE !!!!!!!!!1

    There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Windows accounts which by definition would give you two completely separate libraries. Method two is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer

Maybe you are looking for